How to change the percentage of tax code on ftxp

i have wrongly enter the percentage of tax code while creating tax code in FTXP so plz suggest me how i can change it

Dear Saumya,
Reverse the accouting document which is already craeted for your invoice no., you FI consultant will help in doing so. After reversing the accouting entries update the Tax condition type with respective rate applicable and use update funcionality in VF02 and save the Invoice. This will solve your problem.
I would like to suggest to use posting block funcionality to minimize this issue if it occuring repeatitly.
If the solution proposed is helpfull please reward points and close.
Thanks.
Sumeet Sah

Similar Messages

  • How to change the percentages of tax in already saved invoice

    i want to change the tax ammount in invoice, which i have already saved when i go to the change mode of invoice in (VF02) condition tab the update field is in disable mode so i cant change, please help me reguarding this issue.

    Dear Saumya,
    Reverse the accouting document which is already craeted for your invoice no., you FI consultant will help in doing so. After reversing the accouting entries update the Tax condition type with respective rate applicable and use update funcionality in VF02 and save the Invoice. This will solve your problem.
    I would like to suggest to use posting block funcionality to minimize this issue if it occuring repeatitly.
    If the solution proposed is helpfull please reward points and close.
    Thanks.
    Sumeet Sah

  • How to change the text Transport id code in sus

    Hi,
    How to change the text Transport id code in sus while creating ASN
    Please advise.
    Regards,
    manu

    SE80---> BSP APPLICATION with SRMSUS ---> views -->asn > detail_edit.inc.->
    On the right hand side in the details ---> search for
    BBP_SUS_UI/ASN_TRANSPORT_IDENTIFICATION
    replace the above with the following
    BBP_SUS_UI/INVOICE_DOCUMENT_NUMBER
    BBP_SUS_UI/INVOICE.
    there is no entry available for invoice number , only the above two are available.
    save the changes
    activate the changes
    REWARD POINTS IF USEFULL

  • How to change the keyboard language by code

    I'm building a user interface for my application, some of the fields are in arabic and others are in English, I want to change the keyboard language according to the fields the cursor in, I tried to send KeyEvent once the cursor entered the text field. [[ KeyEvent ev = new KeyEvent(this, KeyEvent.KEY_RELEASED, 1, KeyEvent.ALT_DOWN_MASK, KeyEvent.VK_SHIFT, KeyEvent.CHAR_UNDEFINED,KeyEvent.KEY_LOCATION_RIGHT); ]] but it didn't work! could any body help me please?

    Locale is already setted.
    Keyboard has toggle button(key) to switch input-mode between english and
    native languge(korean). So I'd like to set input-mode per text-field when get focus for user convenient by programing code . But I can't find the toggle key code.
    Is there any idea to do this?

  • How to change the profile value in the pl/sql code without making change in the database

    How to change the profile value in the pl/sql code without making change in the database.

    I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
    if these Profiles are set for the user running this program automatic printing should not be done.

  • How to Change the Alias name for Internet user in SU01 tr code through cod?

    Hi Guys,
                 My req is we have to change the Alias name(SU01 tr code) for the existing users thru code.So can anybody tell me how to change the Alias name like which we do it in SU01 tr code thru code or FM.?
                Is there any FM for tha changing Alias Name?
    Thanks,
    Gopi.

    Hello Gopi Anne ,
                                 You can use the following FM / BAPI :
    BAPI_USER_CHANGE
    MY_BAPI_USER_CHANGE
    For BAPI_USER_CHANGE :
    You need to make use of the IMPORT parameter :
    ALIAS     TYPE     BAPIALIAS                               User Name Alias
    ALIASX     LIKE     BAPIALIASX                               User alias change flag
    Thanks,
    Greetson

  • How to change the country code for Wireless channel usage

    My MacBook country code is set by Japan.
    In this case, I can use only 5.15~5.25 channels from ch#36 to ch48 at 5GHz Band.
    I'd like use the other channels..by other country code.
    How can I change the Wireless card country code?

    The country code is automatically detected and set by your router. Wireless routers use the frequencies specified by the regulatory agencies in the countries in which they are sold.
    There is nothing to change in your MacBook.

  • When I open a jpeg image at 100% is too large to see. How can I change the percentage to be able to view document?

    When I open a jpeg image at 100% is too large to see. How can I change the percentage to be able to view document?
    == This happened ==
    Every time Firefox opened

    You have to change the settings in whatever program you use to open the jpg. Firefox has no control over that. What program do you use to open jpg?

  • My ipad mini ID code is forgetten, and its system is also broken and how to change the ID and restore the system?

    my ipad mini ID code is forgetten, and its system is also broken and how to change the ID and restore the system?

    Hi ..
    Follow the instructions here >  iOS: Forgotten passcode or device disabled after entering wrong passcode

  • How to change the Settings in the Graphic structure. T Code CN41

    Hi,
    How to change the Settings in the Graphic structure. T Code CN41
    Iam using the T Code cn41 to know the diff in Duruation, work, remaining duration in diff project version. I am getting the Graph/curve with standard settings and system is not allowing to change the scale (Y-X Axis) the way i required.
    Pls advise me.
    Thanks in Advance.
    Raju

    Hi,
    Thanks for the reply. But please clarify a bit. Please below is my requirement.
    As per the SAP Avilable screen in T Code CN41,it is showing the scale of 1 and 2 only.
    Assume if it 12 Days as actual work VS Actual duration of 265 Hours .It is showing 2 = actual work of 12 days and 1= Actual duruation of 12 Days.  I want to have the scale in such a way that, we should be able to see from 0-100-200-300 Hours and Days 5-10-15-20.
    Can u pls advis how can i get these and also give me ur mail id so that i can send u the screen shot also.
    Regards
    Raju

  • How to change the vendor code of site in SAP IS retail

    Dear All,
    In SAP IS Retail, At the time of site creation. we create Site Customer & Site Vendor with site creation. For example If Site code is "1228" then the Customer Code of site will be "C1228" & Vendor Code for site will be "V1228". If by mistake I entered wrong Vendor/customer code then how I can correct it ? "WB02" is not the doing it.
    So my questions is How to change the vendor/Customer code of a site in SAP IS retail ? Which T-Code which be required for it ? Please explain me the steps for doing it.
    Regards
    Birender

    Hello Rajat,
    Please provide us more information about the error you have and it's description so that we can help here arounfd here.
    thanks
    Willie

  • How to change the Excise Duty ?

    Hi,
    How to change the Excise Duty from 16% to 14%.
    We treid to chage in the Tcode J1ID. But its effects are not showing in Sales order. What is the customization  to get these effects???
    Regards,
    Dhanunjaya Reddy

    Dhan,
    There are different procedures Tax INJ and Tax INN.
    For Tax INJ
    Define new tax codes in FTXP and the same should be maintained in the Condition records in VK11.
    For Tax INN
    Change the values in Condition types.
    As you are mentioning that you had gone through J1ID which is tax code based(INJ),so maintain the condition records in VK11 and end the validity date for the old tax codes using VK12.
    K.Kiran.

  • How to define validity period for tax codes

    In Fv12 the validity period is in display mode , how to change the validity period ? Will affect the tax codes or  the changes remain for condition records.

    Hi
    You can use t-code FTXP,
    Check the menu option in the main transaction menu for tax rate periods
    Regards
    Sach!n

  • How to change the default BC image that shows in the address bar?

    Does anyone know how to change the default BC image that shows in the address bar? I want to swap it out so the client logo shows next to their URL.
    Thank you!

    Hi,
    If you are trying to change the favicon for your site,
    You can do it from Site Manager-> Page template -> Default Template
    Look for the code   <link type="image/x-icon" href="/Path for your image" rel="icon" />, and Click save.
    Now where you will use this template, it will display your favicon for that webpage instead of BC favicon. You can define it on Page directly if you are not going to use template.
    Please let me know if you have any doubt.

  • How to change the default operators in sap web ui Search screen?

    How to change the default operators in sap web ui Search screen?
    For eg. Using advance search option , I have some fields with default operators like equals, contains,is between, is less than and is greater than. I don't need all these operators for this field.
    I need only "equals" operator. How do i remove the rest of the operators?

    There is a view cluster crmvc_dq where all the standard setting is present related to you r issue. Please try if you can modify that, that way you will avoid the code.
    Incase you are not able to make any changes there then in that case you have to redefine the method GET_DQUERY_DEFINITION () of the IMPL class to delete the operators for a particular serach field.
    Regards,
    Harshit

Maybe you are looking for

  • How to route the workitem to Agent, when no agent found

    1.when agent is not found, i was able to see the workitem in swi2_freq.    If this is case, how do i send workitem to an agent? 2. As this is a general task, but i didn't see this workitem in all user's inbox. is it true that if agent not found for a

  • What are the advantages..

    Hi friends,       can you please tell me <b>what are the advantages of using MVC?</b> because <b>i can use ABAP Objects without using MVC.</b> Thanks in advance, Regards, Kannan.

  • LE 7.1.1

    Cant open Metrenome and or Preference window. Was going to trash the prefs for Logic. Where does this file live? any help??? thanks all I get is the spinning rainbow

  • I can not get my redemption code for photoshop

    Hi, I bought photoshop on JourneyEd about a month ago and I can't get it to download. I don't know my redemption code and the serial number aren't working. Please help me out?

  • Importing barcodes

    Can you import a barcode from excel in to a adobe forms field then print and read the barcode with a hand scanner?