How to check condtions for multilines in switch step in bpm?

Hello,
I am implementing a scenario that send PO create Idoc(orders.orders05) to bpm and bpm receives an OrderResponse from File adapter, I have a switch to check the condition if the Qunatity for each line items from the OrderResponse xml matche with the quantity for each line ltems in OrderCreate, but I don't know how to specify mulitline containers in conditon editor, currently the system only takes the quantity from the first line item.  Any suggestions or other recommendations?  BTW, here is the blog talks about modeling multi rows for incoming message, didn't totally get it...
Using BPM (Blocks) when Incoming message has multilple rows
Thanks,
Hy

Hi,
go to Condition Editor-->After selecting your message in the LeftOperand -->then it will lead into Expression Editor there you can see a check box stating "Multiline".
This will be enabled , if you choose option of XPATH in this Expression Editor.
Hope this helps,
Regards,
Moorthy

Similar Messages

  • Reg:How to check Vendor for particular Asset

    HI
    How to check Vendor for particular Asset?
    regards
    JK rao

    Hi,
    Good morning and greetings,
    It would be very difficult to go into each and every asset and display the asset...instead create a quick viewer query using SQVI and use the table ANLA and the field name is LIFNR for Vendor Code and for Asset Number it is ANLN1.
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • How to check performance for Stored procedure or Package.

    Hi ,
    Can any one please tell me , how to check performance for Stored procedure or Function or Package
    Thanks&Regards,
    Sanjeev.

    user13483989 wrote:
    Hi ,
    Can any one please tell me , how to check performance for Stored procedure or Function or Package
    Thanks&Regards,
    Sanjeev.Oracle has provided set of Tools to monitor the Performance.
    Profilers being one of them; If you wish to understand more on PL/SQL Optimization, please read PL/SQL Optimization and Tuning.
    See example of DBMS_PROFILER.
    See example of PLSQL Hierarchial Profiler

  • Problem with Switch Step in BPM

    Hi,
    I am using Switch Step in BPM, to check a condition. I created following condition (App_Resp./p1:App_Resp_MT/Response = true). The mentioned is correct and it should succeed but it is failing. Its going thru OTHERWISE branch. Can anybody help me to solve this out?
    Thanks,
    Yaseen.

    HI,
    I checked in the workflow the xml file generated contains value 'true'.
    Its not multiline and looks xpath reflects for the changes made.
    I think it may be problem that needs to deploy any OSS notes.
    Please throw some idea.
    Thanks,
    Yaseen.

  • Installed ram, how to check it for faults?

    I've ordered my first Mac, (27 inch iMac) and I've ordered some ram to install in the iMac when it arrives.
    I was wondering, how do I check the installed ram for faults?
    Is there a application etc with Mountain Lion that would allow me to do this?
    Thanks

    shldr2thewheel wrote:
    tal1971 wrote:
    I was wondering, how do I check the installed ram for faults?
    Is there a application etc with Mountain Lion that would allow me to do this?
    the apple hardware test (AHT)
    I've had a look at the link but couldnt see any mention if it checked ram for faults. Can you confirm that it does check ram for faults?
    Thanks for the help, appreciate it.

  • How to check owner for one interface in production system?

    Hello All,
    Please tell me the transaction were i can check owner for one interface in production system.
    Client had created owner for one interface, so were can i check it.
    Thanks and Regards,
    Chinna

    Thanks for the reply,
    i dont want to check the developer name in IR /ID.
    in production system one interface is running and i got mail to check the  generic user and role for that interface.
    iam also bit confused on it
    If u have any idea let me know.
    Thanks and regards,
    chinna

  • Checking condition in switch step of BPM

    hi all,
    i am doing an 1to1 transformation where: i am converting my source into a target. the target has
    header 1
    lineitem 1..unbouneded.
    lets say there are three line items:
    header1
    lineitem
    lineitem
    lineitem
    i am using a send step where i am sending this target msg to a switch step. in the switch step i am checking for a condition.i am checking for the occurence of a field in the line item. but when specifying in the condition editor, it allows only to choose from the root of the structure. how can i check the ocuurence of a particuler field for the lineitem alone??
    is there a way to to do it??
    Any help will be greatly appreciated.
    Thanks

    Hello,
    This is the condition i have currently given: but if i have 2 or more lineitems in the incoming msg does this condition also check for :
    MI_DOC./p1:SRC_ROOT.lineitem/itemfield2 EX
    MI_DOC./p1:SRC_ROOT.lineitem/itemfield3 EX
    etc...
    and in one of the line item the field may EX and some it does`nt. when it doesn`t i am cancelling the process, if the field EX then it is sent to further processing.so if i have 3 lineitems in which two of the line items the field EX and in the other one the field does the EX, are the msgs split accordingly??
    Message was edited by: Aarthi R

  • SWITCH step in BPM

    Hi,
    I am designing one BPM.
    In my incoming payload there is one field,on the basis of this field I have to decide receiver in runtime.
    Please guide me to disgn this BPM.
    I have put switch step ,but I am getting error in BPM.
    Waiting for reply.

    Hi,
    Check this links
    /people/daniel.graversen/blog/2006/09/07/using-a-bpm-to-collect-messages-for-a-set-interval-of-time
    This is really a good document about BPM
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c071d7bb-0601-0010-d6b8-f4e4dc7f1e20
    Thanks,
    Prakash

  • Prblem with Switch step in BPM

    Hi all,
    I have a problem with a switch step in my BPM. The condition on my BPM is that I have an xpath and that should have a particular constant value. If true, then proceed or else passs through the otherwise branch. The success branch has a transformation and a send step. The otherwise has a control step with an Alert category defined.
    So the BPM is like
    Receive message --> Switch (XPath condition a particular node must have a value not equal to zero.) --> if tru then transformation and send step otherwise control step.
    This all works fine as expected when I pass in the correct message format. The problem is, if I send in a message of a completely different structure, it is still going through the otherwise step of the switch case and not erroring out. The BPM is not erroring out no matter what message I pass in.
    Ideally I am expecting it to error out and send an alert message according to the category.
    could somebody please help me on this?
    Thanks
    Karthik

    Thanks for your reply. I already did go through that thread. The switch case works fine for correct conditions and wrong conditions. The problem is, there is no error being generated when the input message is not in a recognizable structure. Switch goes on to otherwise path is I just pass in some random file.
    My question is, why dint the BPM error out when the XPath itself failed..meaning the structure itself is wrong?
    Please reply.
    Thanks
    Karthik

  • Which used iPhone (even discontinued) and how to check it for safety

    I am happy with my 4s.
    In Italy you can have officially unlocked iPhones and Vodafone gives me 2 Sims with same number (master/slave).
    Now I have the slave in an WM HTC which I use as second telefone going in places like beach, or in unsafe places.
    Of course the WM is not so pleasant to be used and I am planning to buy a low cost old iPhone to replace it.
    Asking your suggestion: I wish to use it with iCloud with iCloud Mail and another IMAP provider, sync with Mountain Lion iTunes for Adress - Notes - Mail - Calendar - iMessage. No interest in Music and video but Streming Photo could be interesting.
    How low can I go back ?  Will 3 be enought or should I need to stay on 4 level ?
    I have read that some unofficial unlock could not be easy to detect and thic could give sync problems in future: since I will probably buy it on eBay or similar place, which will be the best test to check the phone aginst jailbreak ?
    Thanks for any suggestion.
    PS: I know ! the best will be to buy a 5 and use the 4s as second but... not so cheap !!

    WALTER-MILANO-ITALY wrote:
    How low can I go back ?  Will 3 be enought or should I need to stay on 4 level ?
    You will need at least a 3GS to meet the needs you've already stated.
    since I will probably buy it on eBay or similar place, which will be the best test to check the phone aginst jailbreak ?
    The best test is don't buy it from ebay to begin with. Either buy one from someone you know personally and trust, or spend the money for a legitimate unlocked new phone.

  • How to check code for syntax errors

    How do I check or validate my html code in dreamweaver. I wish to see if all the braces and tags are closed or not
    please guide me

    Hi There:
    You can check to make sure the tags, parentheses (( )), braces ({ }), and square brackets ([ ]) in your page are balanced. Balanced means that every opening tag, parenthesis, brace, or bracket has a corresponding closing one, and vice versa.
    Check for balanced tags
    Open the document in Code view.
    Place the insertion point in the nested code you want to check.
    Select Edit > Select Parent Tag.
    The enclosing matching tags (and their contents) are selected in your code. If you keep selecting Edit > Select Parent Tag, and your tags are balanced, eventually Dreamweaver will select the outermost html and /html tags.
    Check for balanced parentheses, braces, or square brackets
    Open the document in Code view.
    Place the insertion point in the code you want to check.
    Select Edit > Balance Braces.
    All of the code between the enclosing parentheses, braces, or square brackets is selected. Choosing Edit > Balance Braces again selects all of the code inside the parentheses, braces, or square brackets that enclose the new selection.
    And also make sure to validate your HTML code at - http://validator.w3.org/
    Regards
    Vinay

  • How To Check Disk For Failures

    It's more of a two part question.
    1. Is there a way to check and see if either of my two internal SATA drives are failing?
    2. How can I check and see if either disks have filesystem failures?
    [root@ghost ~]# fdisk -l
    Disk /dev/sdb: 250.1 GB, 250058268160 bytes
    255 heads, 63 sectors/track, 30401 cylinders, total 488395055 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x0005b294
    Device Boot Start End Blocks Id System
    /dev/sdb1 63 488395054 244197496 83 Linux
    Disk /dev/sda: 250.1 GB, 250058268160 bytes
    255 heads, 63 sectors/track, 30401 cylinders, total 488395055 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00048e7c
    Device Boot Start End Blocks Id System
    /dev/sda1 63 8000369 4000153+ 82 Linux swap / Solaris
    /dev/sda2 * 8000370 8385929 192780 83 Linux
    /dev/sda3 8385930 488395054 240004562+ 83 Linux
    One or both drives are becoming more noticeably noisy. Thanks for any info / help!

    Try gsmartcontrol, it's a graphical frontend to smartmontools, which in turn display the SMART status of your hard drives.
    https://en.wikipedia.org/wiki/S.M.A.R.T.
    Post the log here, if you can't understand the values.

  • How to check validation for a input field?

    For example, I need to check the validation of a field, if OK, then the field will be inputted, otherwise, there will rise a message, how can I implement that?
    Thanks and best regards,
    Anders

    Hi Andres,
    U can write a code in Request Processing--DO_VALIDATE_INPUT
    DATA: LR_BTADMINH       TYPE REF TO   CL_CRM_BOL_ENTITY.
      LR_BTADMINH  ?= ME->TYPED_CONTEXT->BTADMINH->COLLECTION_WRAPPER->GET_CURRENT( ).
        LV_ZZAFLD000057 = LR_ENTITY->GET_PROPERTY_AS_STRING( 'ZZAFLD000057' ).
    IF  LV_ZZAFLD000057 IS INITIAL.
    DATA: L7_MSG_SERVICE TYPE REF TO CL_BSP_WD_MESSAGE_SERVICE,
              LVSP_MSG_V1  TYPE STRING VALUE 'Spare in Progress'.
        L7_MSG_SERVICE = ME->VIEW_MANAGER->GET_MESSAGE_SERVICE( ).
        L7_MSG_SERVICE->ADD_MESSAGE(
            IV_MSG_TYPE       = 'E'
            IV_MSG_ID         = 'ZBSP'
            IV_MSG_NUMBER     = '008'
            IV_MSG_V1         = LVSP_MSG_V1 ).
    ENDIF.
    Regards,
    Lokesh.

  • How to check Bdoc for perticular transaction ...

    Hey guys ..
    I have following questions regarding Bdocs ..
    1. How do we check Bdocs (in smw01) for perticular trasaction .eg : for Sales order # 8002345 .
    2. Suppose my sales order has 5 items in it ,then how many Bdcos will be created for this transaction.Is there only one Bdoc for a transaction or each item has its own Bdco ?
    Please guide ..
    Thanks
    SS

    Hi SS,
    Go to SMW01 -Expand  '+' button -
    In Queue name coloumn  enter the sales order no  with Astric  as  8002345 and  then execute.
    Regards,
    Satish Mathala

  • How to check JDK for 64bit installation?

    I just got a new XFIRE 2100 AMD64 and I have a bit of experience with JAVA I downloaded the latest 1.5 update and followed the Solaris 10 instructions, includding the 64bit instructions... But I'm not quite sure if my version of JAVA installed is 64bit or not.
    How can I confirm this?

    How can I confirm this?Check the system property sun.arch.data.model (should be 64)
    Bye.
    RG.

Maybe you are looking for

  • Delivery Date Format in PO !!!

    Hi Friends , I am uploading the delivery date from an input file to create a PO using BAPI_PO_CREATE1 . Before the BAPI call i see in t_poschedule-delivery_date = 08012006.This is the correct date which needs to be uploaded in PO .  But after the BAP

  • Layout with rows defined by variables

    Joint Venture Name is one of our characteristics. We will create a planning layout with two rows, for two different Joint Venture Names selected by the user. The Joint Venture Names should be selected by the user, preferably when opening the layout u

  • When to use the "Process Fields"?

    Hi, I have a simple form with some text fields and a couple of Signature fields.  All is working fine in the WorkSpace. The Process / Workflow is also simple, Initiator --> User --> User. But I want the user to be able to submit the form outside of t

  • Tiny question mark next to site name

    Whenever I load my website I get this tiny question mark to the right of the page name. It appears in the tab and in my bookmarks bar at the top of Safari. Any ideas as to what that could be?

  • Where can i download version 5? my password pank from upek is not compatible with version 6

    my upek biometric fingerprint readers password bank feature does not yet have a plug in for firefox 6, i need to revert back to version 5 and i cant find download.