How to check data after mapping for BPM if the mapping done outside BPM ?
Hi.
I have simple scenario BPM. Proxy -
> JDBC. I have 1 message mapping in between PROXY and JDBC.
and i have put the mapping outside the BPM (i didn' use transformation step). In case error happen. how i can see the data after the mapping ? i am always got difficulty to check the data if i have mapping outside bpm.
Thank you
Fernand
Hi
In case error happen. how i can see the data after the mapping ?
You have used mapping in interface determination of corresponding receiver determination. In transaction SXMB_MONI, open message corresponding to that receiver determination. There in left hand side you will see IS pipeline steps. There if you want to see message payload that is input to Mapping than see payload of any pipeline step before Request Message Mapping and test it in Design. If mapping fails you can see trace of the same step.
Request Message Mapping ---> SOAP Header ---> Trace
There you can see where your mapping failed.
And as rohit replied you can also get message from RWB.
For further clarification revert back to us.
Regards
Sami
Reward points if helpful.
Similar Messages
-
How to stored data after clicking checkbox save in database table
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP.
TYPES: BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
*data: t_data like ztable occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
=========================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'XXXXX'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
ENDFORM. "user_command
this is my code, how to store data after clicking checkbox in databasetable,
how to write that cide.
plz send me code.hi!,
use MODIFY to update data into the data base table.
regards
anjali -
How to check a pdf uploaded for press in a website automatically ??
how to check a pdf uploaded for press in a website automatically ??
i am making a new website for a printer.. his client upload pdf online directly in his website, we want that in the case that the pdf is not
as the printer need it for printing , the site automaticly after checking the pdf profile uploaded open a window and write what is wrong with this pdf
and if possible fix what he can fix automaticly as pitstop software is doing offline.
PLEASE YOUR HELP
thank you in advanceAcrobat isn't available with a server license. You might like to look into PitStop Server.
-
How to read data after select multiple record by checkbox,
hi experts
i m using simple report with check box , and itab whcih contain records
how to read data after select multiple record by checkbox,
thanksHi Prashant,
Try using this logic.This Code displays the list with check boxes. When you check a checkbox and press a button say 'Select All' or 'De Select all' or 'Display'. It will read the data of those records.
DATA :
fs_flight TYPE type_s_flight,
fs_flight1 TYPE type_s_flight1.
* Internal tables to hold Flight Details *
DATA :
t_flight LIKE
STANDARD TABLE
OF fs_flight,
t_flight1 LIKE
STANDARD TABLE
OF fs_flight1.
SET PF-STATUS 'SELECT' .
PERFORM selection.
PERFORM displaybasic .
* AT USER COMMAND EVENT *
AT USER-COMMAND.
PERFORM selectall .
*& Form SELECTION
* Select query to reteive data from SPFLI table
* There are no interface parameters to be passed to this subroutine.
FORM selection .
SELECT carrid " Airline Code
connid " Flight Connection Number
FROM spfli
INTO TABLE t_flight.
DESCRIBE TABLE t_flight LINES w_lines .
ENDFORM. " SELECTION
*& Form DISPLAYBASIC
* Display the basic list with SPFLI data
* There are no interface parameters to be passed to this subroutine.
FORM displaybasic .
LOOP AT t_flight INTO fs_flight.
WRITE :
w_check AS CHECKBOX,
w_mark,
fs_flight-carrid UNDER text-001,
fs_flight-connid UNDER text-002.
ENDLOOP. " LOOP AT T_FLIGHT..
CLEAR fs_flight-carrid .
CLEAR fs_flight-connid.
ENDFORM. " DISPLAYBASIC
*& Form SELECTALL
* To check all the checkboxes with a 'selectall' push button
* There are no interface parameters to be passed to this subroutine.
FORM selectall .
CASE sy-ucomm.
WHEN 'SELECT_ALL'.
w_check = 'X'.
w_line = 4 .
DO w_lines TIMES.
READ LINE w_line .
MODIFY LINE w_line FIELD VALUE w_check .
ADD 1 TO w_line .
ENDDO. " DO W_LINES TIMES
CLEAR w_line.
WHEN 'DESELECTAL'.
w_check = space.
w_line = 4 .
DO w_lines TIMES.
READ LINE w_line FIELD VALUE w_mark .
IF w_mark = space .
MODIFY LINE w_line FIELD VALUE w_check .
ENDIF. " IF W_MARK = SPACE
ADD 1 TO w_line .
ENDDO. " DO W_LINES TIMES
WHEN 'DISPLAY'.
IF sy-lilli BETWEEN 4 AND w_lines .
DO w_lines TIMES.
READ LINE w_num FIELD VALUE w_check INTO w_check
fs_flight-carrid INTO fs_flight-carrid
fs_flight-connid INTO fs_flight-connid.
IF sy-subrc = 0.
IF w_check = 'X'
SELECT carrid
connid
fldate " Flight date
seatsmax " Maximum capacity in economy
seatsocc " Occupied seats in economy class
FROM sflight
INTO TABLE t_flight1
WHERE carrid = fs_flight-carrid
AND connid = fs_flight-connid.
LOOP AT t_flight1 INTO fs_flight1.
WRITE :
/ fs_flight-carrid UNDER text-001,
fs_flight-connid UNDER text-002,
fs_flight1-fldate UNDER text-007,
fs_flight1-seatsmax UNDER text-008,
fs_flight1-seatsocc UNDER text-009.
ENDLOOP.
ENDIF. " IF SY-SUBRC = 0
ENDIF. " IF W_CHECK = 'X'.
ADD 1 TO w_num.
ENDDO. " DO W_LINES TIMES
CLEAR w_check.
w_num = 0.
ELSE .
MESSAGE 'INVALID CURSOR POSITION ' TYPE 'E' .
ENDIF. " IF SY-LILLI BETWEEN..
ENDCASE. " CASE SY-UCOMM
ENDFORM. " SELECTALL
Much Regards,
Amuktha. -
How to check plan line items for plan cost at network activity level?
Dear all,
How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
I am not able to check using CJI4 or CJI9 report.
Kindly advise.
Thanks and regards,
JessieHi Jess,
Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
But I am not sure if suits your requirements. Wait for other experts to comment on this.
Regards,
Amit -
I don't seem to have an align/unalign check box option anymore for tools like the clone and healing brush. PS CC14 Anyone know how to get it back?
Sounds like you have the Narrow Options Bar enabled
Photoshop>Preferences>Interface -
How to defined data carrier valued for Linux?
Hi,
I am Defining Data Carrier. But I don't understand "Data carrier type" value. Is this PC value data carrier type for window? So If I want to define value data carrier for Linux. How to defined data carrier valued for Linux?
Please advise,
DuypmHi Nikita,
Refer the below mentioned links for your requirement.
http://forums.sdn.sap.com/thread.jspa?threadID=412923
http://forums.sdn.sap.com/thread.jspa?threadID=1639500
Both have good guidelines on coding as well as configuration part.
Regards,
Deepak Kori -
How to check data type of the field symbol at run time
Hi,
My code is as following:
LOOP AT <fs> ASSIGNING <wa_covp_ext>.
ASSIGN COMPONENT 86 OF STRUCTURE <wa_covp_ext> TO <f_zzname>.
IF sy-subrc = 0.
ASSIGN COMPONENT 158 OF STRUCTURE <wa_covp_ext> TO <f_pernr>.
IF sy-subrc = 0.
SELECT SINGLE sname INTO <f_zzname> FROM pa0001
WHERE pernr = <f_pernr>
AND endda GE sy-datum
AND begda LE sy-datum.
ENDIF.
ENDIF.
ENDLOOP.
This query is giving dump when <f_zzname> is type P length 8 and decimals 2, because it tries to put PA0001-sname into it which is type C length 30. So I want to check the type of <f_zzname> before the select statement. If it is character 30, then I will write the select statement else not.
How to check data type of the field symbol at run time? If it's not possible, then can somebody suggest a workaround? Thanks.check this ...
write describe statement ...
field-symbols : <f_zzname> .
data : sname like pa0001-sname,
typ(10).
assign sname to <f_zzname>.
describe field <f_zzname> type typ.
write : typ. <-- typ contains character type in this case ..
U can check if typ is of character(C) if so .. write the select statement ... -
How to decrypt data when you can't get the private key in Windows?
I'm very confuse. My english is poor, but I try to say my question clearly.
When browser connects to a https website which needs client certificate to authenticate the identity, the browser will send client certificate to web server.
Then the web server will use the certificate to encrypt some data and send it to browser.
Then broswer should have private key to decrypt that.
But as I know, if I install a pfx format personal certificate, I can set can't export private key, which means you can't get the private key to use it. So how can
the browser decrypt the data without private key?
By the way, what is CSP, use CSP's interface can we use CryptoAPI
to decrypt data without private key?Answer for question is "you cant"..
"How to decrypt data when you can't get the private key in Windows?"
Read more
http://msdn.microsoft.com/en-us/library/windows/desktop/aa387460(v=vs.85).aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/bb427432(v=vs.85).aspx
http://technet.microsoft.com/en-us/library/dd277320.aspx
http://en.wikipedia.org/wiki/Public-key_cryptography -
How to Handle and show multiple pushpin imgaes on the map based on the requirement at different coordintes?
I have multiple images in my App folder. I want to use and show those images dynamically in windows phone 8 map applicationThere are a lot of different ways to do this. One simple method is to use a switch statement when creating your pushpins and based on some property in your data, select the icon you want to use and create your pushpin accordingly.
http://rbrundritt.wordpress.com -
When we get the actual data in BPC for planning, is the data consolidated
I had a question regarding Planning. When we get the actual data in BPC for planning, is the data consolidated? Do we need to run the consolidation business rules( IC Booking, Matching, IC Eliminations) on the data before we can use it for planning? Per my understanding we have to run Currency Conversion on this...correct?
Also, where do I get my actual data from? Does ECC/ Source system have data from all entities( CHQ, Region and Countries)?
Please help!
Thanks in advanceHi Kimi,
In a hierarchical structure, the data is always loaded in to the base level, and the data is automatically rolled up to its parents.
The currency conversion will also take place at the base level, and as mentioned earlier, the converted data will also be rolled up as per the hierarchy.
The heading of this thread says planning. So, ideally, there wont be any legal (or statutory) consolidation. You might use the US elimination however, for eliminating the intercompany transactions, if any.
The planning can be done as zero based (wherein the user has to enter the planned data manually from scratch) or non-zero based (wherein the planned data of previous year is copied and the user can change the data as required).
The flow of events cannot be suggested by us. It has to be discussed with the business to understand how do they do the planning.
Hope this helps. -
How many seats does after effects come with on the $20/month plan? anyone?
How many seats does after effects come with on the $20/month plan?
Just wanted to add that seats can be added in Creative Cloud for Team.
Creative Cloud Help | Creative Cloud for teams
License management and budget benefits | Creative Cloud for teams
Regards
Rajshree -
How to check if there is any problem in the interaction center inbox
hi,
how to check if there is any problem in the interaction inbox for recieving the attachments/cic0
some users who are sending withattachments is not able to reach the sap indox./
but without the attachments the mails are coming
I want to know how we can able to find out were is the problem.
thanks in advance
Prajith Phi,
Any update for the above query.
Thanks & Regards
Prajth P -
How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer
You've tried deleting and redownloading them and seeing if they then work and tried contacting the developers ? If you have and they can't/won't help then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
How can I create a form for users wherein the text field will expand to accommodate additional text?
You need to use LiveCycle (PC Only) to create a dynamic form like that.
The best you can do with Acrobat to view all of the text in a field is to set the field to multiline, and set the size to "Auto" (If you don't set the size to 'Auto', you can enter as much text as you wish, but the user will need to use the scrollbar to view all of the text.)
Maybe you are looking for
-
How can I config a yum plublic repository for VM support without paying ?
Please see: yum plublic repository I'm a bit confused with the options for support/updates. There is an option to get a VM support, which includes support, and a ULN subscription. There is also the option in the pricing guide to just get the ULN subs
-
How do I transfer a color from one object to another without losing the gradient?
COLORING AN OBJECT AND SAVING THE GRADIENT These are my notes. x Choose the EYEDROPPER tool. x Sample the color you want from an object in your image. x Double-click on the fill icon at the bottom of the tool panel. This brings up the COLOR PICKER pa
-
How to leave half line space in SAP Script
Actually , I have a doubt regarding half line spacing on SAP Script .. I am working on Cheque Printing with fbz5 Now the issue in the date, there are 8 box for the date in cheque . i.e 0 2 0 7 2 0 1 4 Currently the date is comming on the cheque bo
-
Safari shuts down when trying to login to a site...same prob in itunes
I think it happened after the last security update... Anytime I log into a secure site safari just shuts down...no error message or shut-down message or anything. itunes does the same thing if I try to login to my account or if I try to burn a CD. I
-
Dear All, I am working on Idoc-XI-File scenario. Currently I am getting an output file with the name "xi_timestamp" but now I want to change the timestamp with the "Delivery No" which is there in the flat file. Kindly suggest how this can be done. Wa