How to Check Error Log for Supply Planning Run
Hi All
I am getting error in supply planning run. I see the status under Excel Add-in >Supply Planning > Status. However there is no detailed error message here
How can I check the detailed log of this error to understand what is going wrong.
Can anybody guide on what can be probable causes of the error
Any help is highly appreciated
Thanks
Vijay
Hello Vijay, Wade
Can you run the Supply Planning in Simulation mode? Under the simulation drop-down you can also see 'Show Message'.
Open it after your planning run to see list of any data inconsistencies.
Thanks
Pramod
Similar Messages
-
Error logging for Integrated Planning
Can I turn on error logging for Integrated Planning. Users get errors and forget to screenshot it to me, so I have no way of finding out what their error was unless I get them to duplicate it. It would be nice to look up a log of errors by user. Do they have something like that in Integrated Planning?
Thanks!Hi Dustin,
Few comments :
1. UPDATE TASK means that a new background task is create and the function is performed asyncronisly ,with that the user will not wait for the update of the DB to finish ,you can read in SAP help about CALL FUNCTION IN UPDATE
2. Be aware that the table that you create will be extremely large in no time ,you will have to delete data on a regular basis
3. The same concept of the thread can be applied to function module 'RRMS_MESSAGE_HANDLING' this function module is responsible of messaging in BEX 'some times IP related messages are invoked from it.
Regards,
Eitan. -
How to capture error messages for BCP when running through XP_CMDSHELL
XP_cmdshell returns 0 as success when running BCP that causes insertion failure for any records (failure because of truncation, data type mismatch etc.)
One way is to capture output message in temp table and can parse the messages. but I am looking for some direct methods.Hi Naveen Raikwar,
We can use insert/execute syntax to insert error output to a file, here is a good article, please see:
http://www.sqlservercentral.com/articles/Error+Handling/69196/
And here is a similar thread, please refer to:
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/b37ec1fd-ea2f-4546-93c1-8bb9d589710d
Thanks,
Eileen
Eileen Zhao
TechNet Community Support -
How to write error log while creating invoice and avoid implicite commit
Hi,
I've have written code in exit RV60AFZZ in which I check for some possible errors while invoicing via VF01/VF04. If conditions are met then we create error message and display it to the user. As result we had a lot of missing SD invoices in FI when we did batch/mass invoicing. I've opened OSS note and SAP support team wrote that using statement MESSAGE is forbidden in UE. It can lead to implicite commits.
Do you have some example how to write error log for invoincing in VF01/VF04 transactions?
Thanks@ sri nath. Please read post before answering. I wouldn't be posting trivial questions. As I wrote before it doesn't work. Also SAP support would not answer to the question in my OSS.
In VOFM, SAP is using routine VBFS_HINZUFUEGEN_ALLG to write to error log.
Mine is something like this in ue:
PERFORM ZVBFS_HINZUFUEGEN_ALLG
USING VBAP-VBELN VBAP-POSNR 'ZSD' 'E '600'
SPACE SPACE SPACE SPACE.
(we have custom message class)
As result XVBFS and VBSK are filled with error, but posting is also done. Error log is filled but invoice is created and posted in FI.
That is not OK.
thanks -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
ORA-00205: error in identifying control file, check alert log for more inf
Hi All,
I created my Database on a directory /mydir .The database is created and sucessufyully working then I mounted this directoy to a shared disk on the same /mydir.My database datafile where restored under /mydir .Now When I try to restart my database I m getting
ORA-00205: error in identifying control file, check alert log for more inf
I check all my database data files are there including my control files.
Any idea why this occuring and How to fix it.
Best Regards.user11191992 wrote:
Hi All,
I created my Database on a directory /mydir .The database is created and sucessufyully working then I mounted this directoy to a shared disk on the same /mydir.My database datafile where restored under /mydir .Now When I try to restart my database I m getting
ORA-00205: error in identifying control file, check alert log for more inf
I check all my database data files are there including my control files.
Any idea why this occuring and How to fix it.
Best Regards.Please post the message in the alert-file as stated.
It can e.g. be that while copying the file permissions have been changed, making the files not readable for the oracle user
HTH
FJFranken -
An Error occured while processing this page. check the log for details
Hi ,
when i open an browser http://localhost:8300/HyperionPlanning/AppWizard.jsp
i get an error stating that :: An error occured while processing this page. check
the log for details
i am not aware where to look the log files.
second issue. on anothor desktop i am able to login but when i create an sample application it moves forward until finish and takes lot of time and gives me an same error as above .
please help me out ASAP iam tired uninstalling and reinstalling the products.
please mail me at [email protected]....
thanks and regards
REDHi,
If you are running planning as a service could you stop the service, then run planning server from the start menu.
If you try and log in again it should produce some error messages.
Cheers
John
http://john-goodwin.blogspot.com/ -
ORA-00205: error in identifying control file, check alert log for more
I am trying to upgrade database software from 11.2.0.1 to 11.2.0.2 and followed the steps given in the Doc ID 1276368.1 in linux 86 OS environment . I am in step 9 where i need to start up the database in startup upgrade mode. I get the the following error. Please help. This out of box upgrade is quite tricky and my database is stigged version. Not able to trouble shoot further, Please help me to go forward.
sqlplus " / as sysdba "
SQL> spool /tmp/upgrade.log
SQL> startup upgrade
ORACLE instance started.
Total System Global Area 1607008256 bytes
Fixed Size 1344476 bytes
Variable Size 973081636 bytes
Database Buffers 620756992 bytes
Redo Buffers 11825152 bytes
ORA-00205: error in identifying control file, check alert log for more info
Do i shutdown and restart again? I need to run @catupgrd.sql; and other.sql to upgrade it and then apply CPU patch.
Please help...regardsFatal NI connect error 12637, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 21-NOV-2011 04:49:04
Tracing not turned on.
Tns error struct:
ns main err code: 12637
TNS-12637: Packet receive failed
ns secondary err code: 12532
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (3912) as a result of ORA-609
Mon Nov 21 04:59:02 2011
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Mon Nov 21 04:59:04 2011
Stopping background process CJQ0
Stopping background process QMNC
Stopping background process MMNL
Stopping background process MMON
License high water mark = 26
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Nov 21 04:59:09 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Nov 21 04:59:09 2011
Shutting down archive processes
Archiving is disabled
Mon Nov 21 04:59:09 2011
ARCH shutting down
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC3: Archival stopped
ARC1: Archival stopped
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC0: Archival stopped
Mon Nov 21 04:59:09 2011
ARCH shutting down
ARC2: Archival stopped
Thread 1 closed at log sequence 1458
Successful close of redo thread 1
Mon Nov 21 04:59:51 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 04:59:52 2011
Stopping background process VKTM:
Mon Nov 21 04:59:56 2011
Instance shutdown complete
Mon Nov 21 07:48:43 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfilertborcl.ora
System parameters with non-default values:
processes = 150
resource_limit = TRUE
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u02/app/oracle/oradata/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.1.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
recyclebin = "OFF"
db_securefile = "PERMITTED"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Mon Nov 21 07:48:47 2011
PMON started with pid=2, OS id=4275
Mon Nov 21 07:48:47 2011
VKTM started with pid=3, OS id=4280
VKTM running at (100ms) precision
Mon Nov 21 07:48:47 2011
GEN0 started with pid=4, OS id=4287
Mon Nov 21 07:48:47 2011
DIAG started with pid=5, OS id=4292
Mon Nov 21 07:48:47 2011
DBRM started with pid=6, OS id=4297
Mon Nov 21 07:48:47 2011
PSP0 started with pid=7, OS id=4302
Mon Nov 21 07:48:47 2011
DIA0 started with pid=8, OS id=4307
Mon Nov 21 07:48:47 2011
MMAN started with pid=9, OS id=4312
Mon Nov 21 07:48:47 2011
DBW0 started with pid=10, OS id=4317
Mon Nov 21 07:48:47 2011
LGWR started with pid=11, OS id=4322
Mon Nov 21 07:48:48 2011
CKPT started with pid=12, OS id=4327
Mon Nov 21 07:48:48 2011
SMON started with pid=13, OS id=4332
Mon Nov 21 07:48:48 2011
RECO started with pid=14, OS id=4337
Mon Nov 21 07:48:48 2011
Mon Nov 21 04:59:51 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 04:59:52 2011
Stopping background process VKTM:
Mon Nov 21 04:59:56 2011
Instance shutdown complete
Mon Nov 21 07:48:43 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/db_1/dbs/spfilertborcl.ora
System parameters with non-default values:
processes = 150
resource_limit = TRUE
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u02/app/oracle/oradata/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.1.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
recyclebin = "OFF"
db_securefile = "PERMITTED"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Mon Nov 21 07:48:47 2011
PMON started with pid=2, OS id=4275
Mon Nov 21 07:48:47 2011
VKTM started with pid=3, OS id=4280
VKTM running at (100ms) precision
Mon Nov 21 07:48:47 2011
GEN0 started with pid=4, OS id=4287
Mon Nov 21 07:48:47 2011
DIAG started with pid=5, OS id=4292
Mon Nov 21 07:48:47 2011
DBRM started with pid=6, OS id=4297
Mon Nov 21 07:48:47 2011
PSP0 started with pid=7, OS id=4302
Mon Nov 21 07:48:47 2011
DIA0 started with pid=8, OS id=4307
Mon Nov 21 07:48:47 2011
MMAN started with pid=9, OS id=4312
Mon Nov 21 07:48:47 2011
DBW0 started with pid=10, OS id=4317
Mon Nov 21 07:48:47 2011
LGWR started with pid=11, OS id=4322
Mon Nov 21 07:48:48 2011
CKPT started with pid=12, OS id=4327
Mon Nov 21 07:48:48 2011
SMON started with pid=13, OS id=4332
Mon Nov 21 07:48:48 2011
RECO started with pid=14, OS id=4337
Mon Nov 21 07:48:48 2011
MMON started with pid=15, OS id=4342
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon C:\Users\MVEMURI 07:48:48 2011
MMNL started with pid=16, OS id=4347
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Nov 21 07:48:49 2011
ALTER DATABASE MOUNT
Successful mount of redo thread 1, with mount id 2616737889
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Mon Nov 21 07:48:54 2011
ALTER DATABASE OPEN
LGWR: STARTING ARCH PROCESSES
Mon Nov 21 07:48:54 2011
ARC0 started with pid=20, OS id=4398
ARC0: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC0: STARTING ARCH PROCESSES
Mon Nov 21 07:48:55 2011
ARC1 started with pid=21, OS id=4403
Mon Nov 21 07:48:55 2011
ARC2 started with pid=22, OS id=4408
ARC1: Archival started
ARC2: Archival started
ARC2: Becoming the 'no FAL' ARCH
ARC2: Becoming the 'no SRL' ARCH
Mon Nov 21 07:48:55 2011
ARC3 started with pid=23, OS id=4413
ARC1: Becoming the heartbeat ARCH
Thread 1 opened at log sequence 1458
Current log# 3 seq# 1458 mem# 0: /u01/app/oracle/oradata/rtborcl/redo03.log
Current log# 3 seq# 1458 mem# 1: /u02/app/oracle/oradata/redo03b.log
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
SMON: enabling cache recovery
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:977954 end:979234 diff:1280
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
Mon Nov 21 07:48:58 2011
SMON: enabling tx recovery
Database Characterset is WE8MSWIN1252
No Resource Manager plan active
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Mon Nov 21 07:49:03 2011
QMNC started with pid=24, OS id=4418
Mon Nov 21 07:49:10 2011
db_recovery_file_dest_size of 4977 MB is 13.68% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Mon Nov 21 07:49:12 2011
Completed: ALTER DATABASE OPEN
Mon Nov 21 07:49:12 2011
Starting background process CJQ0
Mon Nov 21 07:49:12 2011
CJQ0 started with pid=25, OS id=4470
Mon Nov 21 07:54:05 2011
Starting background process SMCO
Mon Nov 21 07:54:05 2011
SMCO started with pid=26, OS id=4515
Mon Nov 21 10:08:01 2011
ALTER SYSTEM ARCHIVE LOG
Mon Nov 21 10:08:01 2011
Thread 1 advanced to log sequence 1459 (LGWR switch)
Current log# 1 seq# 1459 mem# 0: /u01/app/oracle/oradata/rtborcl/redo01.log
Current log# 1 seq# 1459 mem# 1: /u02/app/oracle/oradata/redo01b.log
Mon Nov 21 10:08:04 2011
Archived Log entry 1421 added for thread 1 sequence 1458 ID 0x990b1f4c dest 1:
Mon Nov 21 10:12:53 2011
ALTER SYSTEM ARCHIVE LOG
Mon Nov 21 10:12:53 2011
Thread 1 advanced to log sequence 1460 (LGWR switch)
Current log# 2 seq# 1460 mem# 0: /u01/app/oracle/oradata/rtborcl/redo02.log
Current log# 2 seq# 1460 mem# 1: /u02/app/oracle/oradata/redo02b.log
Mon Nov 21 10:12:53 2011
Archived Log entry 1422 added for thread 1 sequence 1459 ID 0x990b1f4c dest 1:
Mon Nov 21 10:14:44 2011
Shutting down instance (immediate)
Stopping background process SMCO
Shutting down instance: further logons disabled
Mon Nov 21 10:14:45 2011
Stopping background process CJQ0
Stopping background process QMNC
Stopping background process MMNL
Stopping background process MMON
License high water mark = 4
All dispatchers and shared servers shutdown
ALTER DATABASE CLOSE NORMAL
Mon Nov 21 10:14:49 2011
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Nov 21 10:14:54 2011
Shutting down archive processes
Archiving is disabled
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC3: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC0: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC2: Archival stopped
Mon Nov 21 10:14:54 2011
ARCH shutting down
ARC1: Archival stopped
Thread 1 closed at log sequence 1460
Successful close of redo thread 1
Mon Nov 21 10:15:01 2011
Completed: ALTER DATABASE CLOSE NORMAL
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Nov 21 10:15:02 2011
Stopping background process VKTM:
Mon Nov 21 10:15:08 2011
Instance shutdown complete
Mon Nov 21 11:52:11 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is enabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
Using parameter settings in server-side pfile /u01/app/oracle/product/11.2.0/db_2/dbs/initrtborcl.ora
System parameters with non-default values:
processes = 150
memory_target = 1536M
control_files = "/u01/app/oracle/oradata/rtborcl/control01.ctl"
control_files = "/u01/app/oracle/flash_recovery_area/rtborcl/control02.ctl"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_format = "%t_%s_%r.dbf"
db_recovery_file_dest = "/u01/app/oracle/flash_recovery_area"
db_recovery_file_dest_size= 4977M
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
audit_sys_operations = TRUE
db_domain = ""
global_names = TRUE
dispatchers = "(PROTOCOL=TCP) (SERVICE=rtborclXDB)"
audit_file_dest = "/u01/app/oracle/admin/rtborcl/adump"
audit_trail = "DB_EXTENDED"
db_name = "rtborcl"
open_cursors = 300
os_authent_prefix = "SOP$"
sql92_security = TRUE
sec_protocol_error_further_action= "drop"
sec_max_failed_login_attempts= 3
diagnostic_dest = "/u01/app/oracle"
Create Relation DFW_CONFIG_CAPTURE
Create Relation DFW_CONFIG_ITEM
Mon Nov 21 11:52:17 2011
PMON started with pid=2, OS id=7339
Mon Nov 21 11:52:17 2011
PSP0 started with pid=3, OS id=7344
Mon Nov 21 11:52:18 2011
VKTM started with pid=4, OS id=7349
VKTM running at (100ms) precision
Mon Nov 21 11:52:18 2011
GEN0 started with pid=5, OS id=7356
Mon Nov 21 11:52:19 2011
DIAG started with pid=6, OS id=7361
Mon Nov 21 11:52:19 2011
DBRM started with pid=7, OS id=7366
Mon Nov 21 11:52:19 2011
DIA0 started with pid=8, OS id=7371
Mon Nov 21 11:52:19 2011
MMAN started with pid=9, OS id=7376
Mon Nov 21 11:52:19 2011
DBW0 started with pid=10, OS id=7381
Mon Nov 21 11:52:19 2011
LGWR started with pid=11, OS id=7386
Mon Nov 21 11:52:19 2011
CKPT started with pid=12, OS id=7391
Mon Nov 21 11:52:19 2011
SMON started with pid=13, OS id=7396
Mon Nov 21 11:52:19 2011
RECO started with pid=14, OS id=7401
Mon Nov 21 11:52:19 2011
MMON started with pid=15, OS id=7406
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Mon Nov 21 11:52:19 2011
MMNL started with pid=16, OS id=7411
starting up 1 shared server(s) ...
ORACLE_BASE from environment = /u01/app/oracle
Mon Nov 21 11:52:20 2011
ALTER DATABASE MOUNT
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/u01/app/oracle/flash_recovery_area/rtborcl/control02.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-205 signalled during: ALTER DATABASE MOUNT...
Mon Nov 21 11:52:21 2011
Checker run found 1 new persistent data failures -
An Error Occurred While Processing This Page. Check The Log For Details. Pl
Hi,
I started getting this error while opening the app
Application was working fine. All of a sudden this error came while opening the application.
" An Error Occurred While Processing This Page. Check The Log For Details. Please Close The Current Tab and Open Application Again."
I cannot see calc manger rules for this means in calc manager I am not able to see this app.
Also, in logs I see
java.lang.RuntimeException: Error loading objects from data source: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
I am not able to get why this is occurring.
Any help?If it is not important then you can try deleting and recreating the application, if you want to be sure after you delete the application then drop/recreate the Oracle schema.
If you have problems deleting the application and have to remove it manually the following post might be helpful Planning 11.1.1.3 - Manually Delete a Classic Application
Cheers
John
http://john-goodwin.blogspot.com/ -
ORA-00205: error in identifying controlfile, check alert log for more info
Hello All,
I am performing my first Collab Suite install in quite some time and I have successfully installed Collaboration Suite on Linux Red Hat AS 4. I first performed an infrastructure installation for the Collab Suite database which completed with no errors, however, it appears that no control files were created in my $ORACLE_HOME/dbs directory during installation. I am also unable to specify their exact location in the initSID.ora file as I am unable to find them in any other directory on my server. The database starts despite the control file error, as you can see from the second SQL*Plus prompt. However, I am unsure how to create the control files or correct this error. Any assistance would be greatly appreciated!
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Mar 21 09:51:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect SYS as SYSDBA
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 100663296 bytes
Fixed Size 778024 bytes
Variable Size 99623128 bytes
Database Buffers 0 bytes
Redo Buffers 262144 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
======================================================================
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Mar 21 11:18:57 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect SYS as SYSDBA
Enter password:
Connected.
SQL> startup nomount
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining optionsControl files are database-specific, since they contain information describing the database (location of data files, etc.) You can't copy them from one database to another.
Do you have a backup? -
Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
SukumarHello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß -
Error in loading the WSDL file. Check the error log for more details
Hello,
I am trying to create a Import Adaptive Webservice Model. I am using the WSDL:
http://www.abysal.com/soap/AbysalEmail.wsdl
I am getting the below error when I choose WSDL source as UDDI or file (I am not using any logical destination)
"Error in loading the WSDL file. Check the error log for more details."
Where can i see the error log? And what is the solution to fix this?
I am able to create the model if i save the wsdl locally on my machine and choose Local File System or File as the WSDL source. But at runtime this fails as the application tries to read the WSDL for metadata info and it looks into the application server for this file.
I also tried creating the old webservice model. And it is able to create the model. But I feel I need to use the new model as this one is deprecated.
Thanks,
SachinHi
For the logs you can search in this directory
Goto Window->Show view->Other->PDE Runtim->Error Log
please try this may it would help you out, try to create a model for you Web Service using Web Service Model (DEPRECATED)
See this link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/integration%2bof%2bweb%2bservices%2b-%2bdifferent%2bscenarios -
Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
RakeshHi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
ORA-00205: error in identifying control file, check alert log for more info
Hi
I'm creating a database manually,
I am hitting with the following error :
SQL> startup mount
ORACLE instance started.
Total System Global Area 150667264 bytes
Fixed Size 1335080 bytes
Variable Size 92274904 bytes
Database Buffers 50331648 bytes
Redo Buffers 6725632 bytes
ORA-00205: error in identifying control file, check alert log for more info
Following is the entry in init.ora
control_files='/u01/oracle/db/oradata/testdb/control01.ctl','/u01/oracle/db/oradata/testdb/control02.ctl'
and this the owner priviliges of /u01/oracle/db/oradata/testdb directory
drwxrwx--- 2 oracle dba 4096 Oct 10 12:16 testdbFound in $ORACLE_BASE/diag/rdbms/$ORACLE_SID/$ORACLE_SID/trace/alert/log.xml
ORA-00210: cannot open the specified control fileORA-00202: control file: '/u01/oracle/db/oradata/testdb/control02.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
ORA-00210: cannot open the specified control file
ORA-00202: control file: '/u01/oracle/db/oradata/testdb/control01.ctl'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3 -
Error in identifying control file, check alert log for more info
hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30ayadsufyan wrote:
hi ,
i have a problem when i try to login to oracle
i found this messsage
error
ora-01033 oracle initialization or shutdown in progressafter i logged on with / as sysdba
i did the following
SQL> shutdown immediate;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 293601280 bytes
Fixed Size 1248600 bytes
Variable Size 79692456 bytes
Database Buffers 205520896 bytes
Redo Buffers 7139328 bytes
ORA-00205: error in identifying control file, check alert log for more info----------------------------------------------------------------
O.S = Windows 7 Profissional
Oracal release= 10 g release 10.2.0.1.0
the last lines of the alert log file is
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 71303168
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
sga_target = 293601280
control_files = E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL, E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL02.CTL, >E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 205520896
compatible = 10.2.0.1.0
db_file_multiblock_read_count= 16
db_recovery_file_dest = e:\oracle\product\10.2.0\db_1/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=orclXDB)
job_queue_processes = 10
audit_file_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\ADUMP
background_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\BDUMP
user_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\UDUMP
core_dump_dest = E:\ORACLE\PRODUCT\10.2.0\DB_1\ADMIN\ORCL\CDUMP
db_name = orcl
open_cursors = 15000
pga_aggregate_target = 96468992
PMON started with pid=2, OS id=1560
PSP0 started with pid=3, OS id=208
MMAN started with pid=4, OS id=972
DBW0 started with pid=5, OS id=4092
LGWR started with pid=6, OS id=3812
CKPT started with pid=7, OS id=344
SMON started with pid=8, OS id=3492
RECO started with pid=9, OS id=2272
CJQ0 started with pid=10, OS id=3276
MMON started with pid=11, OS id=1832
MMNL started with pid=12, OS id=1636
Wed Nov 21 11:44:31 2012
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Wed Nov 21 11:44:32 2012
ALTER DATABASE MOUNT
Wed Nov 21 11:44:32 2012
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified file
Wed Nov 21 11:44:32 2012
ORA-205 signalled during: ALTER DATABASE MOUNT...Please anyone has any info please share me
thank you ,
regards,
Edited by: ayadsufyan on 21-Nov-2012 01:04
Edited by: ayadsufyan on 21-Nov-2012 01:30I'd say the error message is pretty self-evident:
ORA-00202: control file: 'E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\CONTROL01.CTL'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) can not find the specified fileWhat do you suppose "can not find the specified file" means?
And what does this have to do with database security?
Maybe you are looking for
-
ITunes 10.5 Error Message on System Startup. AppleSync Notifier.exe.
On Windows XP startup I get an AppleSyncNotifier.exe error message: "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." Has anyone else had this problem and if so have you found a solution?
-
Adobe Digital Edition Reader wont open up and accept files from kobo in smashword zip format says not supported
-
FILE model support for CSV and fixed-length format!!
Hi all, As I'm working on a data conversation project, we are in the middel to design whether the extraction for the data source should be in CSV or fixed-length. Here is the pros and cons: CSV: 1. There are a lot of remarks field in the data which a
-
New-SPWOPIBinding throws "WARNING: The server did not respond".
Hi, I have installed the office web apps in another server. Which is in another domain, sharepoint server is in another domain. Both were in various Lan. I am now trying to configure the office web apps in sharepoint. When i enter the command New
-
ISE admin , PSN and monitoring node fail-over and fall back scenario
Hi Experts, I have question about ISE failover . I have two ISE appliaces in two different location . I am trying to understand the fail-over scenario and fall-back scenario I have gone through document as well however still not clear. my Primary ISE