How to check mails send or not

Dear All,
I am Using Java Mail API to send mail even if there are some invalid mailids in the cc list, But some time mail are not sending because of some mail server issues(eg insuffcent storage), Is there any fuction to handle this issues,Please advice me how to identify.
Is there any other way apart from catching the "SMTPSendingFailedException"
with Regards,
Prakash Shanmugam

ksp wrote:
Now I have 2 more questions now
1) When we use attach option in java mail API, the junck are displayed in our java server console, how to block this unwanted junck characters.What junk characters? Maybe you need to disable debugging or not log to the console, but to file or something.
2) Is there any function to store the mail contant and send it automatically to the mail server, when the mail server gets ready.No, you will need to write that yourself.

Similar Messages

How to check mail already read or not?

Hi everyone
I am developing an application using javamail api.
I have no idea how to check mail is already read or answered or seen using javamail api.
I need to fetch new mail every time. I used DELETE flag ,its working fine but it also delete mail permanently from inbox.
I want to fetch new mail and already fetched mail is also reside in inbox. but not fetched next time.
Pls help me.

Either I'm not understanding you, or you're not understanding JavaMail.
First, the POP3 protocol supports no permanent flags, as explained in
http://java.sun.com/products/javamail/javadocs/com/sun/mail/pop3/package-summary.html
You can set flags on messages, but they won't persist after you close the folder.
If you set the DELETED flag and close the folder and expunged deleted messages,
the messages are gone for good.
That's not a JavaMail limitation, that's a POP3 protocol limitation.
Again, as explained in the link above, to determine which messages are new you'll
need to keep some state in your application about which messages you've seen
and compare that state with the current state of the INBOX. You can use the POP3
specific UIDL command to help with this.
Does that help?

HT2731 Created Apple ID. But Not able to verify. Verification mail is sent on Apple ID and do not know how to check mails in mail box .

Created Apple ID. But Not able to verify. Verification mail is sent on Apple ID and do not know how to check mails in mail box .

The verification email will have been sent to the email account that you put as the primary email address on the account - log into that email account as you usually do and you should have an email from Apple.

PO mail output sender set as po release person, how to changet mail sender?

Hi expert
Now we setup po mail output. But we found when po released, the release person become the po mail sender. this is not we wanted. We checked with sap, they mentioned this is current sap logic. there is one function which need add some program , but sap doesn't support it.
So we hope to check if there is any user exit, We hope to select purhcase group id 's mail address as po mail sender, But which user exit could work for this po output send?
Thanks
Alice

Hi....
Did you get any solution to your problem ? If yes, can you please share the same with me ?
I have a similar requriement from my customer, but am not able to figure out how to do this.
Thanks in advance,,,,,Devendra

Mail sender adress not in SHeaderFrom if length more than 50 characters

Hi,
we 're using the mail sender adapter in PI 7.00 to get attachments as XIPAYLOAD from our mailserver.
Also we get the sender address in SHeaderFrom.
Now we have the problem, if the sender address is larger then 50 character it is NOT stored in SHeaderFrom.
Why? How to resolve this problem?
Has anyone an idea?
Many thanks for answers
Sven

Hi,
we 're using the mail sender adapter in PI 7.00 to get attachments as XIPAYLOAD from our mailserver.
Also we get the sender address in SHeaderFrom.
Now we have the problem, if the sender address is larger then 50 character it is NOT stored in SHeaderFrom.
Why? How to resolve this problem?
Has anyone an idea?
Many thanks for answers
Sven

Mail - sends but not visual signal

Hello,
We've got mac OS X Tiger mail sending mail perfectly well. I hear the little air plane sound go on, but the little gear next to "sent" does not show. Does anyone know how to make it happen? Thanks
chris

Bruce Bridges wrote:
any ideas on why mail would send but not receive gmail?
What do you see for that account if you invoke Mail's menu option Window > Connection Doctor?
Pay particular attention to the settings under the "Advanced" tab for that account in the Mail preference "Accounts" panel.

How to check all items are not null in CAML Query?

HI All,
In a CAML Query, i got three items. In all three items, a particular column(Closure Date) should not be null. How to check in all three items, where 'Closure date' is not null?
Thanks in advance!

Hi,
Try this:
"<Where><IsNull><FieldRef Name='Closure Date' /></IsNull></Where>"
Hope it hepls!
Thanks,
Avni Bhatt
If this helped you resolve your issue, please mark it Answered

Dynamic Configuration of Mail-Sender does not work

Hi,
we use XI 3.0 SPS 19.
In my szenario I have a mail sender and I have receiver determination with conditions depending on the mail subject.
In the condition editor, I selected the context object "SHeaderSUBJECT" to build my condition.
In the mail communication channel I turned on the Checkbox "adapter specific message attributes".
But the condition doesn't work!!!
I wrote a small UDF to get the dynamic configuration of my mail sender-message - but it's NULL.
If I change my scenario from Mail-Sender to a file-sender, everything works fine (I can select the filename, etc.).
Is there a problem with dynamic configuration of a mail sender?
Thx all for your help!
Regards
Wolfgang Hummel

Check also "Variable Transport Binding".
You see in the SXMB_MONI whether the ASMA is available or not.
Regards
Stefan

Why will "mail" send but not receive?

Hello, mail program sends mail, but won't receive. I've restarted twice, and restarted modem too, but mail continues to not work properly. Any suggestions?

Try this maybe some help here.
http://www.apple.com/support/macosx/mailassistant/

Services/Mail/Send file not working

I used to email audio files from iTunes using the "Services/Mail/Send file" menu item. It created a new mail in Mail.app with the file attached. Doesn't work any more - ideas?

Hi =)
Pat,
I've tried also to send the file while logged in my gmail account.
It still doesn't work and I got the same error message.
Why do you think this happens?
Thank you for replying =)

How to check mailer configuration is set or not

Dear,
We are on r12,right now all the notification are being sent and appear after login the application in woklist window, now i want to know that is mailer is configured or not, how to verifiy that mailer is proper configure and there is not issued in mailer configuration
--thanks

Thanks for reply,
i followed all the setups as you mentioned but when i check record in wf_notifications table,it show's MAIL_STAT as Failed, so what this mean?
could you please advice.
--thanks

TS3276 I have an iMac and a Mac Book Pro. Downloaded Mountain Lion on to both. All seemed to be going well until I checked Mail. Could not send a message. Went thru all the steps to make sure that my ISP info was correct. Didnt work. Took to ISP and did n

I have an iMac and a Macbook Pro. Downloaded Mountain Lion. Could no longer send mail messages. Checked my Mail preferences and they were correct. Icalled my ISP and they tried to help make it work by setting some new preferences Did not work. Took Mac Book Pro into ISP to see if they could remedy the problem. They could not. Still cannot send messages. The only thing I did from when mail could send mail and when it could not was to download Mountain Lion on to both computers. Help!

Just realised that with the SSL checked in the smtp set up, password authorisation is required and is put in the box immediately under the SSL checkbox, which is under the port(s) being used. Can now send mail:)

How to whitelist mail sender?

My sister's e-mails have been ending up in my junk mail folder quite often of late. We often share short messages with links, and she's one of the few people whose links are virtually always of interest to me. Even messages in reply to messages I originated end up there at times. I tell mail that they're not junk when I find them there, but that has not helped. How can I set up a rule so that messages from a specific sender are ALWAYS whitelisted and come to my inbox?
I don't see a way to create a rule that says:
If sender is MySister, never mark as junk, just put it in my inbox.

If that is the case Mail is not marking it as junk, her or your email provider is.
You can test this theory simply, open Mail>Preferences>Junk: Uncheck these two boxes
And then see if her mails continue to go to Junk or Spam.

Mail Sending but NOT RECEIVING! Mail 3.6 Macbook 2009 OSX Leopard

Hey All!
I have been having huge issues with my Mail Server for the past week and a bit now which is hard because I work from home. My Rogers Yahoo email account can no longer send emails from my Mail app on my computer. I know it is not rogers themselves because my phone email works fine. I have tried many of the suggestions so far on the forums but nothing seems to be working and I am tempted to just give up and create a entirely different email with a different provider. It seems to not be able to connect to my SMTP server. I have double and tripled check that I have all the right ports, User names and passwords and still nothing. Any help would be greatly appreciated!
P.S. Yes I know I am greatly out-dated now but I have no money or upgrading. Unfortunate I know.

Hi, just to confirm...
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the exact message?
Then click the Show Details button & Check again.
Is your Phone connecting through your home network, or a cell tower?

Custom e-mail send method not working

Hi all,
I have a custom workflow (my first one, so bear with me), and implemented in the BOR a method that calls a FM which implements CL_BCS class to send an e-mail.
BOR is a Z copy of BUS1065.
The workflow is triggered from a FM called using SWEHR3 transaction every time a particular infotype is created/updated from either PA30 or PA40.
The strange thing is the email is not appearing in SOST transaction and of course, not being sent. (Commit Work is in place).
And what is more... if I execute the FM outside the PA30/40-SWEHR3 scenario, the e-mail sent is working perfectly.
So... anyone can point me in the right direction to solve this?
Thanks in advance for your valuable time.
Regards,
Andres.

Hi Viji: I think the business object method alone works fine. As I said, when I execute the FM "manually", the e-mail is sent. Workflow log isn't showing any error in any form of execution.
Hi Patrick: All workflow config. is in place. I know that because all the other workflows are working.
Anyway... I'm happy to say I managed to solve the issue and here's how I did it. If anyone has a better solution, please share it.
While I was going through the standard code of method "SendTaskDescription" BOR "SELFITEM", I noticed this SAP comment:
*- There problems with the implementation of persistence service
*- of objects. The symptom of this problems is that sendorders
*- (SCOT) are not saved if an object pool exists. Therefore we
*- create a new session in this environments.
The "new session in this environments" made me think in "STARTING NEW TASK", so this the final calling sequence:
PA30/PA40:
--> Trigger Z Function configured in Tx. SWEHR03.
> Call Z RFC Function STARTING NEW TASK.
> Do lots of stuff and triggers Workflow.
And everything works like a charm!
Thanks for your suggestions!

How to check mails send or not

Similar Messages

Maybe you are looking for