How to scan an Excel Page/sheet for specific value in cells?

Hi,
I want to be able to scan an excel sheet for a specific value and return it.
My goal is to be able to scan the excel file which it compares to another value:
I.E : reads item 1 which gives it a value of A it will then search for this A at location X it will then return a value that matchs it or return a pop up message saying no such item exists in area excel page G.
Message Edited by MrSafe on 07-23-2008 04:48 PM

I did not understand your explanation since I don't know what "item 1" is supposed to be to read. Skipping that, the easiest way to do this is to do the searching in LabVIEW. Simply read the Excel sheet into an array and search the array in LabVIEW. You can try to use ActiveX to execute the "Find" method, but that's up to you. You can research MSDN on how to call the "Find" method. The attached example is one that I created a while ago as an example to read an Excel range into an array. It's in 8.0.
Attachments:
Read Excel.vi ‏35 KB

Similar Messages

How Can I Create One Entry Sheet For Multiple Line Items of A PO

Please Tell Me How Can I Create One Entry Sheet For Multiple Line Items of A PO

hi,
It is not possible to create single Service Entry sheet for multiple PO line items. It is 1 to 1 relation.
you have to make different service entry sheets for different item of service master.
regards
Manish Joshi

How make Adobe Muse Master page Template for BC

How make Adobe Muse Master page Template for BC.?
Thanks
Ares

Hi Brad,
I notice doble brackets and also use normal page for converting it to BC template. Also I have delete uploaded page from /dir as BC every time generating the same tamplate but with diferent name when I am publishing updated project from Muse.
Ares

Disable release flag in service entry sheet for specific users

How can we disable the release flag for specific user/s in Service Entry Sheet(ML81N)?
Can any one suggest?
arjman

Hi dear,
In the ML81N T code, there is an object M_EINK_FRG Release code and code grp.
leave it empty. and assign the Role to the user with whoom you dont want to release the SES.
In this process the system will show you the green flag and also allow you to release the SES but when you will save it the system will give an Error Message about the Authorization.
this will not allow the user to release the SES.
Hope it Helps,
Regards,
Yawar Khan
Edited by: 1234_abcd on Jan 21, 2011 12:40 PM

How do I insert multiple pages in a specific order?

I create reports in Word and convert them to Adobe before sending them out to customers. I often need to insert additional (Adobe) pages into the report before sending it out; sometimes I need to insert mulitple (20 or 30) pages. Does anyone know how I can insert these pages in a specific order? A few times in the past, Adobe gave me the option to select the order, but lately that option has not come up. HELP!

Hello Try67,
I go to Document>Insert Pages then select the files I need to insert. The order in which the pages are inserted is important because they are results of pressure tests (e.g. Sample 1 thru sample 10). I just ran a trial; I tried to select them from top to bottom and bottom to top and it did not seem to make a difference...they went into the document in reverse order. As I mentioned earlier I used to get a pop-up screen that would ask what order I wanted the inserted pages in...I don't get that pop-up anymore.

How to change color of a button for specific time interval in jsp

How to change color of a button for specific time interval in jsp.
Please help.
Thanks in advance.

This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
_The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
I hope this works for you too.

SCCM 2012- How to limit a collection membership only for specific count of machines

How to limit a collection membership only for specific count of machines

As I said you can use where SMS ID like %1 and see how many machines that gets you. If it's not enough do where SMS ID like %1 or SMS ID like %2. Keep adding a digit until you get ~5000. It won't be perfect though.
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

Hi, We are a physiotherapy practice trying to use i-cal as a clinic diary systaem for 15 therapists. We need to block out availability of therapists but cant do this? How can you block someones diary out for specific times on i-cal? Any help please..

Hi, We are a physiotherapy practice trying to use i-cal as a clinic diary system for 15 therapists. We need to block out availability of therapists but cant do this? How can you block someones diary out for specific times on i-cal? Any help please..

iCal is designed for personal use, and isn't really meant to handle this sort of situation.
The best suggestion I can offer, though it's a trifle untidy, is: create a calendar for each therapist, giving each a different colour. Enter the availability for each therapist - if it's on a weekly basis you can make them repeating events. Then add the individual appointments, which will show alongside in the daily view. In this example, the 'purple' therapist is available from 1030 to 1700 and has appointments at 1200 and 1500.
If you have more than a few therapists available at any one time it's liable to look a bit messy, but it's the best I can think of at the moment.

How do i get an alignment sheet for a hp deskjet f4180 printer? cannot find mine.

Need Alignment sheet for HP deskjet F4180.
Help.

Hi - Go ahead and follow the steps in this document to print the alignment page and run through the alignment process. Make sure you follow the entire process as stated in the document. If you don't finish the step to scan the alignment page, the printer will continue to print alignment pages.
Hope that helps
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

How can we print the page numbers for TABLE OF CONTENTS form When its excluded from the form page count ?

Hi Experts,
We have TABLE OF CONTENTS followed by 100 forms with totally 215 pages.
We have checked in the Exclude from form page count option for TABLE OF CONTENTS form in Group level.
The forms followed by TABLE OF CONTENTS form all are using FORMSETPAGENUM rule in footer.
the very first form followed by TABLE OF CONTENTS form the page number starts at 1 of 215 and the last form ends at 215 of 215.
Now i want to print the Page number for TABLE OF CONTENTS form alone.
How can we do that ? Any thoughts ?
Regards,
RAMAN C

Hi Raman,
I guess, you have included 'Exclude Page Count' option in Table Of Content (TOC) form.
There is a limitation in studio. The page number functions (FORM PAGE NUM OF/ FORMSET PAGE NUM OF) will be ineffective when we select the 'Exclude Page Count' option in TOC form. Hence, you was not able to print the Form Page Count in TOC form.
The only way to print page count is to deselect 'Exclude Page Count' option. Then you can normally print the TOC Page Count in TOC form. However, thiS TOC page count will add to the Total formset Page Count. The Formset Page Count can be controlled through Postransdal using the script [FORMSET PAGE NUM = TotalPages() - 1]
Regards,
Mahesh

How to implement Rows Per Page Selector for a tabular form kind of report

Hello,
Can somebody please tell how to implement Rows Per Page Selector in a tabular form (updatable report)
-- similar to what we can have in an Interactive report---
Plz help me out.

You have to create item text field or select list (in interactive report is select list, you can create static value for example 10, 15, 50 , 100,500,.....) . In the Tabular form you have to go Report Attributes, search Number of Rows (Item) and select your item. And thats all. If I help you please check CORRECT or Helpful.

How to create a service entry sheet for a purchase order acct assmt = U

I need to create a service entry sheet using bapi BAPI_ENTRYSHEET_CREATE for a purchase order with account assignment category as 'unknown' (U).I am able to create SE sheet for a purchase order if account assignment is maintained in PO but our requirement is susch that at the tme of PO creation they dont assign Acct assgnment cat but want SE sheet to be entered with category 'P' and WBS elemnt . I tried to pass the asscount assgnment category in the header data as 'P' and entered WBS element in table it_services. I am getting error message
'No account assignment exists for serviceu2019. any help in this regard is highly appreciated.

can u create it SE entry manually without A/c assignment ?.
regards
Prabhu

How can i show sales order details for specific partner in view

Hi All,
My Requirement is that I want to display the sales order id,sataus,amount in sales order assignment block in Customer FACTSHEET. I created a new componnet and new view for Sales Order View using BTQRSlsOrd BOL Entity in ONEORDER I want to diplay sales order id ,status ,amount for specifc business partner which i selected from Account Tab in WEB UI.How can i bind my ( view or context node or context ) so that it shows details of sales order for specific business partner.
Thanks in Advance.......
Vishwas Sahu

Hi Vishwas
I hope the following link helps you in setting up the sales order in account fact sheet:
Add Sales Order to Account Factsheet
If you are on CRM 2007 SP03 then you might need the following note:
Note 1165224 - Search result is not showing up in IC account factsheet.
Regards
Rupesh

How to populate field on page with Primary Key value from previous page

I am trying to create a patient tracking system for a group of doctors. There is an add patient form based on the Patient table (which has Patient_Id as its primary key) which branches to a pre-operative assessment form. I would like to populate the pre-op assessment Patient_Id field with the Patient_Id generated by the Add Patient page during processing, which comes from the Patient_seq sequence. How can I do this? I have tried using a computation on the Pre-Op Assessment form, but no matter what I put in, the field remains blank.

Hi,
If I understand you correctly, once patient record is created you branching to next page (pre-operative assessment form). First create a static hidden item in patient form *:PX_PATIENT_ID_COPY*.
Create an On submit after computation and validation process in patient form to get the inserted patient_id from patient table. Here is the code -
SELECT patient_id into :PX_PATIENT_ID_COPY from patient_table where rownum=1
order by patient_id descI would not use the sequence to get the current value because if the inserted record been deleted from your patient table, sequence current value would not be valid to find that record in patient table.
Basically when the record been inserted, the process get the value and put into the hidden item.
Pass the value from the hidden item to the next page by setting them in page branch. Under the Action section in the page branch, Set this items field type - *:PX_PATIENT_ID* (next page item for patient_id). Type *&PX_PATIENT_ID_COPY.* in the with these values field. Make sure you include dot(.) after *&PX_PATIENT_ID_COPY*.
Give it a try now. Hope it would helps.
Regards,
Tajuddin
Blog: http://aspblog.whitepagesbd.com
web: http://tajuddin.whitepagesbd.com

Edit page offset for specific printer models - SAP Adobe Life Cycle Designer 8.0

Hallo,
is it possible to edit the page offset in x-direction? Where? My problem is that any printer models has different page offset settings. For this reason I am searching for a possibility to edit the page offset for each printer model.
I found some informations about that. But I don´t know where I can adjust it.
http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=000502.html
Is it possible to adjust it in the XDC-file? How?
Thanks

Hi,
Check these links..
http://help.sap.com/saphelp_nw04s/helpdata/en/56/f2c94a069f44a785b85748e11f82a0/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60afe503-74e0-2a10-59b1-d92ad0dff62b
Regards,
John

How to scan an Excel Page/sheet for specific value in cells?

Similar Messages

Maybe you are looking for