How to check the missing process

Hi,
That I have FILE adapter to parsing the file. and after process, the file will be moved to archive folder.
now we found if there are many files be process @same time, the file did move to archive folder. but BPEL didn't trigger the instance. so looks like the process didn't completed.
I did check the server log - domains.log cannot find any error.
Could someone advise me how to check this?

Hi,
While configuring file adapter for read, increase the Minimum File Age.
Also you can Manually recover your files, of which instances were not created, from BPEL Console.
Login to console->BPEL process tab->Perform Manual recovery.
Cheers,
Abhi...

Similar Messages

How to check the parent process chain of a meta chain

Hello Friends,
Recently I joined a new project, which is of environment BW 3.0. I am trying to find the dependent process chain's parent, but could'nt able to find them. I went through all the process chains manually to check whther the dependent process chain is mentioned in them, but could'nt find any......
Can any of you help me to know how to find the parent process chain of a meta chain ?
I really appreciate your time, will be awarding points to any answers.......
Thanks,

Hello Radhan,
thanks for your quick reply. I searched the table based on your advice, but i could'nt get the parent process chain's name. Can you throw some more ideas please..........
Thanks,

How to check the scheduled process chain in SM37

Hi Experts,
Can anyone tell me how do I check whether my process chain has been scheduled or not.
I checked in sm37 all the jobs that are under released status. Im getting about 10 jobs.
I dont know which one is belogs to my process chain as they do not have the process chain names.
Can anyone please let me know how do I confirm whether one of the released jobs below to my process chain.
Thanks in advance.

Hi,
To find this out, in sm37, select the job and click on step button in toolbar. You would find the program name RSPROCESS.
Click on this job and then go to menu bar and select goto-> variant.
In the variant, you can see the process chain that has been used for this job.

How to check the performance of process chain.

Hi experts,
Can any one suggest me the process how to check the performance of the process chain in a graphical presentation (need detailed info on this)??
Thanks in advance.

Have a look ath this:
Process Chains Performance
Hope it helps.
Regards

How to analyze the extraction process for 2LIS_02_SCL both in R/3 & BW.

Hi All,
I have a problem here regarding the extraction process for the DataSource 2LIS_02_SCL. The values posted by date fields like
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
In BW are suspected to be wrong values.
So I am supposed to check the extraction process for PO Schedule Line (2LIS_02_SCL).
So how can I proceed with this analysis in BW side as well as in SAP R/3.
Can anyone please help with the process.
Thanks in advance.

Hi,
In Bw thre is always confusion about following Dates.
Posting Date (0PSTNG_DATE)
Schedule Line Delivery Date (0SCL_DELDAT)
Statistics Date (0STAT_DATE)
So ask Functional Consultants and Business USers and Identify the corretc Date in ECC and then Change the Mapping In UPdate Rules in BW. i.e. What date USer is wanting and accordingly we nee dtgo change the mapping in UPdate Rules in Time Char Tab in UpdateRules.
Thanks
Reddy

How to see the Missing Auth in HR

Hi...
When I am trying to use the Tcode CBIH12 in ECC6 (client 200), It is throwing the below error message:
cbih12 --> Hit List ( F8 ) --> It is showing the below error message:
Internal Program Error: SAPLCBIH_ER00
SAPLCBIH_ER00
ERROR_CBIH_ER30_ER_READ 3)
Message no. C$153
Diagnosis:
Internal System error
Procedure:
Notify your system Administrator
Error data:
SAPLCBIH_ER00
SAPLCBIH_ER00
ERROR_CBIH_ER30_ER_READ 3
But, I am able to access successfully in client 300 in the same system.
When I see the SU53 in client 200 where I am getting the problem, Authorization check is Successful.
But it seems it's clearly an "Authorization" issue.
So, How to see the Missing authorizations in HR.
Can anybody help on this ??
Thanks..
Hari

Hi...Thanks for the response.
Ravi: No dumps(ST22) and also No error messages(SM21) are being created for this problem.
Julius:
We are getting the problem for the agent Type: EXPO_BIO in clinet 200.
We are able to get the data for the same Agent Type: EXPO_BIO in clinet 300.
Both are using the same Standard Function Module.
And also able to get the data for the another Agent Type:EXPO_CHEM in both the clients which is also using the same Function Module.
So it might not be the problem with the Function Module.
And also I have SAP_ALL authorization. I was able to access this till two days before.
2 days before only they implemented EHS authorisations. There onwards we are facing the problem.
Thanks in Advance..
Hari.

How to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word

how to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word
ranki

Hi,
You can use Performance Monitor and add the required counters.
Check the below Technet article on Performance Monitor.
http://technet.microsoft.com/en-us/library/cc749249.aspx
Below are the steps to monitor the process in Performance Monitor.
- Go to the Performance Monitor.
- Right-click on the graph and select "Add Counters".
- In the "Available counters" list, open the "Process" section by clicking on the down arrow next to it. Select "% Processor Time" (and any other counter you want).
- In the "Instances of selected object" list, select the process you want to track. Then click on "Add >>" button. Click on OK.
Regards,
Jack
www.jijitechnologies.com

How to check the BW and BIA systems are up and working fine.

Hi friends,
how to check the BW and BIA systems are up and working fine. And also what is ICM, how to check whether it is working properly or not.
ANd what is name resolution and IP , how to check whether this is running fine.
regards, balu.

Hi,
you can use process monitoring or the alert function in the standalone TREXAdmin tool.
ICM:
http://help.sap.com/saphelp_nw04/helpdata/EN/0a/a7903febb15a7be10000000a11405a/content.htm
name resolution
http://en.wikipedia.org/wiki/Domain_Name_System
IP:
http://en.wikipedia.org/wiki/IP
Please also have a look at the transactions TREXADMIN and RSDDBIAMON2.
I think it´s better if you use the forum search and google/wikipedia before you ask such questions.
Best Regards,
Jens

Script for checking the replication process in Netscape Directory Sever 4.1

Hi,
We are using Netscape Directory Server 4.1.6 in our production environment. Where we want to know is there any script available to check the replication process. Or can we write a script to check the process.
Waiting for your replies at the earliest.
Thanks,
Syed A.

Hi Syed,
Replication state is very easy to see in 4.x and earlier. The last changenumber in the supplier changelog is visible (on the root DSE IIRC), and each consumer suffix has an operational attribute "copiedfrom" that tells you the name of the supplier, the database generation id, and the last change replayed from the supplier.
So a script that compares the results of
ldapsearch -h <supplier> -s base -b "" "objectclass=*" lastchangenumber
and
ldapsearch -h <consumer> -s base -b <base_suffix> "objectclass=*" copiedFrom
will show you if a replica has fallen out of sync. It won't tell you more than how many changes behind the replica is, though, because pre-5.x changenumbers are sequential integers, not timestamps.
However, the change that corresponds to the changenumber is clearly visible under the "cn=changelog" suffix. So if you look at the change itself you can see the timestamp on it.
For more info on the status of replication, you should be able to query the agreements on the supplier. Those live under the "Netscape Machine Data Suffix", which you can also find on the supplier's root DSE:
ldapsearch -h <supplier> -s base -b "" "objectclass=*" netscapemdsuffix
And of course the error logs will usually tell you if replication is failing outright.
I may be off on some of the attribute names, but if you do some investigating along these lines, you should be able to figure it out.

How to include the missing PF status in screen

Hello All,
How to include the missing Pf-status in screen?
Regards,
Lisa.

check if the pf-status you use currently has all needed functions
if yes, probably you call it with an EXCLUDING statement and you have to remove some functions from the internal table of exclusions
if no, you have either to enhance this pf-status with additional functions either to copy it and enhance the copy, then call the copy in your program

Does anypne know how to fix the missing MSCVR80.dll file? Ive reinstalled itunes several timessysystem restores. Ive tried everything I can think of . Been sitting here all day and nightHELP!!!!!!!!!!!!!!!!!!!

Does anypne know how to fix the missing MSCVR80.dll file? Ive reinstalled itunes several timessysystem restores. Ive tried everything I can think of . Been sitting here all day and nightHELP!!!!!!!!!!!!!!!!!!!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

How to check the timeshot of iProcurement approval request notification?

Dear all:
As the subject, how to check the timeshot of every iProcurement approval notification ? Can someone provide the SQL to check?
Environment: Oracle R12.1.3 | Aix 6.1
Regards
Terry Chen

The delay could be because
1) The Workflow Background process in Oracle was down or because it is scheduled to run every 1 hour or so.
2) The workflow notification process that sends the email notification out was down.
3) If the example you gave is an actual example, the difference is exactly 1 hour. That is too much of a coincidence. In that case, the email got sent out right away. It just appears to be one hour late due to timezone difference.
Hope this answers your question,
Sandeep Gandhi
Edit: Third point above is not valid. I just noticed the difference is 25 hours. Looks like your mail server or Outlook was down.
Edited by: Sandeep Gandhi, Independent Consultant on Mar 25, 2011 7:27 AM

How to find the missing fonts?

hi,
Is there any other options to find the missing fonts in a illustrator 10 file using AppleScript.
or
How to identify the missing fonts and missing links dialog box when opening a document through AppleScript. Suppose if i can identify in the particular file means (in batch processes), i need to neglect the particular file and open the other file in a BatchProcess.
Regards,
Subha

reply as soon as possible.........

How to check the availability of a SCS-Instance

Hi.
We want to use HP serviceguard for our HA solution - but we do not want to pay so much money for the SAP serviceguard extensions. So we do it ourselves...
My question: how to check the availability of the SCS-Instance on regular basis on os level?
- is it enough to check the enqueue and message server process? I don't think so :o)
- is it enough to check the latest entry of this file?
/usr/sap/<SID>/SCS<SYSNR>/work/available.log
some typical entry of this file looks like these:
Unavailable 30.04.2009 17:03:07 - 04.05.2009 11:32:33
Available   04.05.2009 11:33:33 - 05.05.2009 17:33:05
Available   05.05.2009 17:35:36 - 05.05.2009 17:35:36
Available   05.05.2009 17:37:51 - 06.05.2009 08:49:11
Other ideas?
Thanks for your help!
Martin

Hi,
what type of script you want to run at OS level, u can check the status in MMC itself if you are using windows or u can check the status in index.html informaiton page or u can use JCMON at OS level to check the status.
-Srini

How to check the memory and CPU usage on NPU

Hi expert ,
Could you tell me how to check the memory and cpu usage on NPU?
I think ASR1000 has this command (show platform hardware qfp active...) , but I coudn't find the same command on ASR9001.
I checked " show controllers np counters all" command, but I did not find it.
Platform: ASR9001
version: 4.3.2
NP: Tyhoon
Thanks,

Hi Kanako,
understand your question, but something like that doesnt exist for the trident/typhoon NPU's for the asr9k.
in fact cpu usage is not really applicable for parallel/serialized hardware forwarders, but mainly the KPI is here
the PPS it handles.
The max pps it can handle is dependent on feature set.
What you could do is measure the rates on the PARSE_FABRIC_RECEIVE count (packets received from fabric, so egress direction), PARSE_ENET_RECEIVE count (packets received from the interface to the fabric, so ingress) and the LOOPBACK count, that is packets that are recirculated for extra processing. The sum of these 3 gives an idea of the PPS rate the NPU is working on.
Memory consumption is something tricky also, there are many memories attached to the NPU, notably:
TCAM used for vlan matching, ACL and QOS matching
Search memory for L2 and L3 (shared on Trident, separated on Typhoon)
Frame memory for packet bufferin in QOS
Stats memory, for all kinds of counters of QOS maps, interface stats etc
their usage is rather dynamic also.
The few things you want to verify on these are:
- ACL usage (in terms of Tcam entries)
- MAC table size (2M max on typhoon)
- FIB size (4M max on typhoon)
frame memory is dependent on the buffering, which is a sum of all the packets instant queue length and size of all pmaps attached to interfaces served by the same NPU. there is no good overview as to how much you have available of that, but it has a rather significant size 1G or 2G depending on the TR or SE cards (typhoon specific).
regards
xander
Xander Thuijs CCIE #6775
Principal Engineer
ASR9000, CRS, NCS6000 & IOS-XR

How to check the missing process

Similar Messages

Maybe you are looking for