How to choose default tab

I created spry tappedPannel in dreamweaver cs3 and the first tab is the default.
How to make the default my 3rd tab??
Thanks in advance

First if you are using CS3 and I see this is your first post so you must follow these few steps first:
http://labs.adobe.com/technologies/spry/home.html
Visit the above page and visit the Spry website. Download the Spry Updater package. Once downloaded it will give you an Extension for DW. Install this extension and then run DW. You will see a new option under the Commands menu (i believe that's where it puts it). Right that command to update the Spry and it will update all your Spry files in that site and update any future Spry you may update (that Commands update only needs to be run on pre-existing sites). There are further instructions in the package.
Next you need to go to this page:
http://labs.adobe.com/technologies/spry/articles/tabbed_panel/index.html
Search for this text on the page: Set Default Open Panel
That will give you instructions. See here for a live demo: http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_sample.htm
The reason I had you run the upgrader first is because all of the documentation is based off of the 1.6.1 release and I wanted to make sure you that you are looking at exactly what the documentation is talking to you about.
If you have any questions or run into any issues post back.

Similar Messages

How to choose default calendar in iOS7?

Anyone who know how to choose default calendar in iOS7?

Have you tried a reset?
Quit the settings app: Double tap the Home button and swipe the app preview page up
Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
You can also try resetting All Settings:
Settings > General > Reset > Reset All Settings
You will not lose any data but it will remove any settings made in the settings app.

How to make default tab selection

Hi,
We are using EP 6.0 with sp2 and patch level 39, out EP has data distrubuted over many tabs however, depending upon the portal logged in user, one particular tab has to be selected by default, please let me know how can I achieve this.
Thanks

Hi Swetha,
Below link tells you the whole story and how to achieve navigation as per requirements.
http://help.sap.com/saphelp_nw04s/helpdata/en/92/3e703e632c7937e10000000a114084/frameset.htm
This thread can also do teh value addition
Tab Order
Regards,
Vishal
PS: Reward points for helpful answer.

How do I change default tab from .5 to .25 in word 2008 for mac?

Mountain Lion
How do I change default tab from .5 to .25 in word 2008 for mac?
Thanks
Message was edited by: Rafael Montserrat1
Thanks, Rafael

They haven't been checked as Solved, it's an option for you to choose one if the answer has solved your problem. You can mark one answer as Solved, and two as helpful. Only you, as the originator of the topic, can see these buttons.
Sorry for the goofed answer. Most people are looking to set the margins and I looked over that you were interested in the tabs.
To save tabs in fixed positions that will appear with every new document, you must modify the default template. You can't open the template from the desktop. If you do, it will open as a standard document. You must open it from the Open dialogue box from within Word. With Word in the foreground, press Command+O and navigate to:
/Users/your_account/Library/Application Support/Microsoft/Office/User Templates/
Open the file Normal.dotm
Set your tabs and save the file. Close the template. All new documents will now open with those preset tabs.

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

Hi Hannah,
Inspector > Text > Tabs Button > Tab Settings > Default Tabs.
To set a tab stop on the go, click in the ruler.
If you can't see the ruler, Menu > View > Show Rulers.
To set tab stops for lines (paragraphs) you have already typed, select those paragraphs and set them all at once.
Also, have a look at Menu > Pages > Preferences > Rulers.
Regards,
Ian.

How to use php variable for default tabbed panel

I have a tabbed panel and with tabs labelled with the days of the week. What I want to do is open up the tab that correspond to the current day. I have been using the following to get the day in 3 char format:
<?php
$jd=cal_to_jd(CAL_GREGORIAN,date("m"),date("d"),date("Y"));
echo(jddayofweek($jd,2));
?>
What I want to do is replace the value for the default tab in the following statement with a variable that matches the day returned with a number:
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1", {defaultTab:1});
Please could anyone advice?
Regards,
Lloyd

Hi,
BIND_VARIABLE is useful when you have only IN variable but in your case you have IN and OUT.
I don't know if you use the gateway for MS SQL SERVER or HSODBC/DG4ODBC but here how you can do to call a remote procedure with bind variables:
DECLARE
ret integer;
inp varchar2(255);
outp varchar2(255);
BEGIN
inp :='Hello World';
outp :='';
ret := "dbo"."in_out_proc_test"@tg4msql( inp, outp);
dbms_output.put_line('Input value: ' ||v_ut1||' - Output value: '||v_ut2);
END;
The MS SQL Server procedure belongs to the user "dbo" and the database link
being used is tg4msql.
The following line initilaize the out variables of the procedure with an
empty string:
outp :=''
I hope it helps you.
Regards
Mireille

How do you get rid of default tabs on a document in pages 09?I h

Hi.
I am wanting just one tab on my document, but there are many popping up that I believe are default tabs. I am trying to delete them in inspector but it is not letting me. Any tips???
Thanks!

Select the text you want to apply your tab to and set the tab on the ruler by clicking on it.
In the absence of any specified tabs the tabs will jump to set intervals on the ruler.
Peter

How can I set New Tab Plus as my default tab?

When I would open a new tab, New Tab Plus would come up, then I could select from my apps that I had added on there. Tonight we had a quick power outage (under 1 minute) while I was out and when I opened Mozilla (that part came up correctly) and clicked to open a new tab, New Tab Plus should have come up, but didn't. I'm not very computer literate, so I'm not sure how to get New Tab Plus to come up when I open a new tab. I even tried reinstalling but I can't remember how to have it as I had it before.

I strongly suggest that you buy an Uninterruptible Power Supply (UPS).
Some of them also have software that, if the UPS is out of juice, it
will safely shut down the computer.

How to code with tab strip control in se38

HI masters,
In SE38 i created tab strips with 4 tabs in selection screen. Each selection screen having 4 or 5 input fields.So whenever user click on first screen he will fill the input on that screen, and based on that fields only he will get information. Each tab is totally differ from other tabs, i mean first tab is orders and second is invoice like that. so there is no connection betwen tabs data. Everything is individual tabs.
I dont know how to code that.Can you plz help me how to code that? Thanks in advance.Its very urgent.

To create a tabstrip control area, choose Tabstrip control from the object list in the Screen Painter and
place it on the screen. Fix the top-left hand corner of the table control area, and then drag the object to
the required size.
Assign a name to the tabstrip control in the Object name attribute. You need this name to identify your
tabstrip control.
In your ABAP program use the CONTROLS statement to declare an object with the same name. Use
TABSTRIP as the type.
The type TABSTRIP is defined in the type pool CXTAB. The field ACTIVETAB contains the function
code of the tab title of the currently active tabstrip. The other fields are reserved for internal use.
The default number of tab pages for a tabstrip control is two.
Technically, tab titles are treated in the same way as pushbuttons. They have a name, a text, a function
code, and a function type. You enter these in the Name, Text, FctCode and FctType fields of the object
attributes.
A tab title can have the function type ' ' (space) or 'P'. If the function type is ' ' (space), the PAI
processing block is triggered when the user chooses that tab, and the function code of the tab title is
placed in the command field. If the function type is 'P', the user can scroll between different tab pages of
the same type without triggering the PAI processing block. For further details, see the following pages.
If you want your tabstrip control to have more than two pages, you must create further tab titles. To do
this, choose Pushbutton from the object list in the Screen Painter and place it in the tab title area.
You must assign a subscreen area to each tab page.
The subscreen area assigned to a tab page is automatically entered as the Reference object (in the
Dictionary attributes) for the tab title of that page.
To assign a subscreen area to one or more tab pages, choose the relevant tab title in the fullscreen
editor, choose the Subscreen object, and place it on the tab page.
Alternatively, you can assign a single subscreen area to several tab pages by entering the name of the
subscreen area directly in the Reference object field of the attributes of the relevant tab pages.
If you have assigned a different subscreen area to each page element in a tabstrip control, you can
scroll between the pages locally at the front end.
To do this, you must send all of the subscreens to the front end when you send the main screen itself. All
of the tab titles in the tabstrip control must also have function type 'P'.
Now, when you scroll between the different page elements, there is no communication between the
presentation server and the application server.
When the user chooses a function on the screen that triggers PAI processing, the system processes the
PAI blocks of all of the subscreens as well. This means that all of the field checks are run. In this
respect, you could regard the tabstrip control as behaving like a single large screen.
Local scrolling in tabstrip controls is more appropriate for display transactions.
Screen Painter:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN subarea1
INCLUDING SY-CPROG '0101'.
CALL SUBSCREEN subarea2
INCLUDING SY-CPROG '0102'.
CALL SUBSCREEN subarea3
INCLUDING SY-CPROG '0103'.
PROCESS AFTER INPUT.
CALL SUBSCREEN subarea1.
CALL SUBSCREEN subarea2.
CALL SUBSCREEN subarea3.
ABAP:
CONTROLS: my_tab_strip TYPE TABSTRIP.
To program a tabstrip control to scroll locally at the front end, you must:
Assign
a separate subscreen area to each tab page; a subscreen will be sent to each of these
when the screen is processed.
Call
all of the subscreens from the flow logic.
Assign
function code type 'P' to all of the tab titles.
The system hides any page element whose subscreen contains no elements that can be displayed.
If there are no page elements containing elements that can be displayed, the system hides the entire
tabstrip control.
Hope this is helpful, Do reward.

Oracle Business Intelligence How to choose data set based on a condition

Hi,
I am using Oracle Business Intelligence for creating reports, i am facing a situation where i have two quries (data sets in BI), one to display a Failure message and other to fetch data from the table to be displayed in the report.
The problem is i am unable to choose which data set to run based on a condition. How to use a condition based on which the dataset will be run
For example : i will read a table column value if it is 'S' means success, then i have to run the dataset to fetch the data from the table.
If the column value has 'F' then i have to run the dataset which will display failure message
Please let me know if any of you have any idea on this
Thanks in advance
Muthukumaran

Hi Chinna,
You have to use some scripting as well as coding to perform the tasks listed by you. First of all make your form Dynamic, In your Adobe lifecycle Designer, open your form,
Goto, File --> Form Properties,
Goto the Defaults tab,
Select "Dynamic PDF" for the XDP Preview Format:
Click OK.
This setting will now allow dynamicity in your Form, when you view it in PDF Preview tab.
For Hiding/Unhiding the fields/SF, you can use the presence property and set it based on the conditions. like:
if (this.rawValue == null)
TextField1.presence = "hidden";
For your second task, you may map a method corresponding to onSubmit event of the IF and write the code to create the workflow and make RFC call here.
For third one, you need to convert the PDFObject from Binary context into a byte array and save it at appropriate location.
Hope I have answered all your queries.
Cheers,
Arafat

How to choose an iPhoto Library to sync in iTunes?

I have 3 iPhoto Library in my Mac. I want to sync my iPhone with one of them, but I don't know how to choose in iTunes the right Library.
In this moment I have one selected, but it's not the one I want.
Can anyone help me?
thanks

Launch iPhoto with the Option key held down, click on Choose Library, and specify the one you want to sync. iTunes will only sync the iPhone with the iPhoto library set as the default in iPhoto.
(46020)

How to set default User preferences in Analyzer for all users

How to set default User preferences in Analyzer for all users Hi, I would like to set some settings in Analyzer as default for all users. For example: 1. Display | Char 2. right mouse click on char | Chart Properties 3. Axes tab 4. "Format: Currency" i would like to change to "Format: Number". How to set default values to all users? Is this possible? Thanks, Grofaty

I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work. As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to. HTH

In PO how to bring default tick in info update?

In PO how to bring default tick in info update? Please explain me very clear. I know the transaction OMFI is using. I need how to assign with parameter ID? Please be clear?

Hi,
Go to SU01, here enter the User ID and click on "Change" button
Here in "Parameters" Tab, maintain the value for e.g. 01 or 02 (which ever key you are using) against Parameter ID EVO and save.

How to choose diffetent PO types in R/3 from a SC in Classic Scenario

Hello everyone,
I am working with SRM 5.0 in a classic scenario and I have a problem. I create a SC, then it is sent to sourcing cockpit where I assign it a vendor to create a PO, but I can't choose what kind of PO I want to create.
In PPOMA_BB, the user has at least 2 different PO's in attribute BSA and attribute DP_PROC_TY. When I create a PO from a Bid invitation I can choose this kind of POs.
Do you know how to choose different POs type from SC??
Thanks,
Ivá

Hi,
For backend products,In standard you can not choose what PO you want. By default the backend document type 'EC' is chosen. In number ranges for SC followon documents the interval number 'PO' would correspond to backend EC document external interval number. This is the standard behaviour though you might have maintained BSA attribute with other values in addition to EC.
For local products you can choose the PO transaction type. After youclick on create purchase order, in the next screen you will get an option choose your transaction type, provided you have maintained these in PPOMA_BBP for BSA attribute.
Hope this clarifies.
Rgds,
RRK

How to choose default tab

Similar Messages

Maybe you are looking for