How to clear local currency balance in foreign currency account

hi,
i have a bank account in EUR but local currency is USD.
in the account balance, it has 0 in EUR but has balance in USD.  i need to clear the amount in USD.
i tried f-02 to post EUR 0 and balance which in USD i enter in amount in local currency field but when simulate, the system converts the USD amount for EUR and EUR with an amount.
may i know how to clear local currency balance for a foreign currency bank account which has ZERO balance.
thanks

Dear ,
can u give me the details
what is the invoice transaction (Entry
how u clear that transaction (entry)
what is the difference values.
Regards
radha

Similar Messages

  • How to clear cumulative local currency balance of foreign currency Bank a/c

    Hi,
    We are facing a problem with the foreign currency Bank account from which we make payment in foreign currency but when we see the balance in local currency there is a difference.
    e.g Local Currency RMB Bank Account Currency USD
    Current Balance in Bank Account 1000 USD RMB rate 0.275 Balance in Local currency 275
    We make a payment of 1000 USD at that time rate is 0.270 Payment in local currency i.e. 270
    When we display of GL Balance of Bank account it is showing 0 balance but balance in RMB still showing 5 KWD which is not correct as we dont have any balance in USD. How to avoid this situation.
    Regards,
    Nirmala S.

    You have to configure realized and unrealized exchange rate gain/loss accounts in transaction code OB09 for all your foreign currency balance sheet accounts.  Once this configuration is done, you have to perform foreign currency valuation (F.05 or FAGL_FC_VAL) to clear the balance in local currency and post it to unrealized exch. rate gain/loss accounts configured in OB09 above.

  • Vendor balance in foreign currency

    Dear Experts,
    how i can see vendor balance in foreign currency?
    Thanks,
    Amir

    hi Amir,
    goto FBL1N select ur vendor as well as cc and execute here select Change lay out button select ur currency it shows in ur currency balances ok.

  • Foreign Currency valuation on Foreign currency items posted in Local currency accounts

    Hi Gurus,
    I have accounts maintained in local currency and only balances in local currency is not checked. Some items are posted in foreign currency.
    Now system is doing foreign currency valuation on foreign currency balance of this account. I dont want system to do that.
    Now how to correct it. I can make balance zero of account and then mark that tick of only balances in local currency but still system will do foreign currency valuation on items posted.
    Appreciate you help in solving this issue. How to handle it?
    Thanks

    Hi ,
    While executing Foreign currency valuation, you can select the GL accounts for valuation. Try to not input these local currency GL's.
    Cheers,

  • Vendor Balances in Foreign Currency

    Hello Experts,
    In standard SAP, S_ALR_87012082 Report displays the Vendor Balances in Local Currency. Is there any Std. report  similar to this which displays the Vendor Balances in Foreign Currency. Because there could be some foreign vendors invoices are posted in Foreign Currency.
    We are in ECC 6.0
    Any inputs please.
    Thanks
    Balaji

    Read the data from LFC1 Table and use Function module to convert into foreign currency FM -  CONVERT_TO_FOREIGN_CURRENCY
    Reward Points if it is helpful
    Thanks
    Seshu

  • HT1918 I have 2 iTunes accounts. How do I transfer the balance to the new account and then delete the old one?

    I have 2 iTunes accounts. How do I transfer my balance from the old account to the new account and then delete the old account?

    i dont think that is possible, but then again, anything is possible. probably gonna have the best luck by contacting itunes / http://www.apple.com/support/contact/

  • Vendor + customer balances in foreign currency

    Hi all,
    We need 2 reports which are is pretty similar to the following both:
    1.)Vendor balances in local currency
    Transaction:
    S_ALR_87012082
    2.)Customer balances in local currency
    Transaction:
    S_ALR_87012172
    The only difference should be, that the 2 reports should show the balances in <b>foreign currency</b>.
    Are there any standard-reports or functions available for our problem?
    Thank you and best regards,
    Stefan

    Hi,
    i'd use 2 fm's:
    1) READ_LFC1 / read_knc1
    2) CONVERT_TO_FOREIGN_CURRENCY
    or use bapis:
    BAPI_AP_ACC_GETPERIODBALANCES
    BAPI_AR_ACC_GETPERIODBALANCES
    @Rob,
    i don't get your answer!?
    reports RFDSLD00 / RFKSLD00 are in local curr.
    Andreas

  • Bank Reconciliaiton and Clearing Process of Banks in Foreign Currency

    Dear all
    Can you please help me out in this process? My client has a bank account managed in USD and his Local Currency is in EURO.
    Payments are made to a supplier in USD at an established exchange rate. The bank reconciliation (manual) is then processed on a later date with a different exchange rate - the rate in the system.
    The client is then clearing the Vendor Payments with the Bank reconciliation posting. This in turn posts a clearing document as well as a realised gain/loss on exchange. The clearing of the Payment with the invoice also takes place as a further process with a further gain/loss on exchange created. 
    The client is saying that in the case when clearing Payments with the Bank reconciliation for foreign currency the posting should not create a gain / loss on exchange.
    Can you please help? Is the process correct? They can update the foreign exchange rate in the table when posting the bank reconciliation to be more or less equal to average exchange rate of payments but this is not practical.
    Is it possible to someway define the exchange rates during manual bank reconciliation or avoid the creation of an exchange rate division?
    Many thanks
    PRG

    Hi PRG,
    When the Invoice has been made at a different rate and payments are being processed at a rate different from the Invoice, system is bound to create the additional line items for gain/loss on forex.
    One option you can look out for is in the OBY6-Company code global settings-Select the check box Indicator: No ex.rate difference when clearing in local crcy.
    Thanks
    Aravind

  • How to clear the PPC balance to change the material type?

    Dear experts,
    Our customer need to change some material type (valuation class as well) from semi-finished product to purchase part. It uses Product Cost Collector for semi-finished/finished product and never makes settlement for any PCC.
    To change the material type through MMAM requires zero stock and cleared PCC balance. So we removed the stock of the semi-finished product and settled the PCC for every month of this year.
    Since the products could have entry this year and last year, even if we settled their balances of this year, it still can not be changed the material type.
    And we do not know how to settle the PCC balance of last year because only one field YEAR can be entered on screen KK87/CO88. If I enter settleme period 11, posting period 12 and fiscal year 2007, system will give error "Period 12 is not allowed".
    But we happend to find one product has no entry this year but has balance value of last year. Its material type can be changed w/o any errors, which seems last year balance has no impact material type change. I get confused.
    Can any one advise whether I'm wrong and where?

    Hi Sharan,
    Matl Povided to Vendor stock will appear in Subcontracting scenario.
    If at all you have given some material to a subcontractor , this will be consumed automaticaly when you will recieve the ordered material from subcontractor.that is 543 movement will take place in the backgroung when u do the GR.
    In case if u need to clear the stock u can do 542 and take the stock back to unrestricted.
    Edited by: Donsandy on Jan 21, 2009 6:19 PM

  • Not able to clear the credit balances in EURO EEFC account u2013 150180

    Hi Friends,
    Not able to clear the credit balances in euro foreign currency account 
    Kindly do need full.
    Thanks,
    SRIKANTH

    Dear Srikanth,
    Can you be more elaborate. If you are trying to clear the EURO account in your local currency, if system issues error message, then in OBY6, select check box no diff in forex when clearing in local currency.
    If this is not the issue, please elaborate in detail.
    Thanks
    Aravind

  • Changing GL a/c currency, maintained in foreign currency, to Company Code currency

    Hello Friends – We have got few GL Accounts maintained in foreign currencies and posting also made to these accounts.  Now, for some reasons, we need to change their currency to Company Code currency.
    We have referred SAP Notes – 146824 and they say that it is possible to change the currency to local currency.
    My doubt is that when I change the currency, I should reclass the balance to zero, once done, and then reclass the balances back.
    Or I can directly change the currency?
    Can you pls advice.
    Thanks

    Hi
    There is absolutely no problem in changing an account currency from foreign to local currency. This is because, when you have the account currency as local currency, transactions in any currency can be posted to the account including the foreign currency in which the account was previously maintained. You do not need to set/reset the account balance for this change. Please also look at the below links which are helpful:
    Change Account Currency - Implications | SCN
    http://books.google.co.in/books?id=WuhM4yEffEUC&pg=PA19&lpg=PA19&dq=changing+the+currency+of+a+G/L+account&source=bl&ots…
    Regards
    Sowmya

  • Does setting multi currency and fixed foreign currency make a difference ?

    Hi all,
    My customer deals in foreign currency say USD, where as local currency is INR.
    Now I want to know that what all difference SBO will make if in one scenario I set the Inventory GLs currency as Multi currency and in second scenario I set the Inventory GLs currency as USD ?
    Regards,
    Samir Gandhi

    Hi Samir,
    in essence, an account/BP that is set up as multicurrency (MC) is local currency (LC) in disguise. All transactions are held in the application in LC, the display is merely informational according to the exchange rate defined for the posting date. The reconciliation currency is LC.
    A foreign currency (FC) account/BP will only accept transactions in this FC. The LC equivalent is automatically calculated, but the reconciliation currency is FC. Exchange rate differences are used to adjust LC according to the rate at the execution date.
    If you use a particular bank account for trading with a particular foreign country, the account currency & the BP currency should be set to a single FC. If a particular bank account is used to deal with various BPs using various currencies, that account should be set up as MC, yet we would recommend you set the BP as single FC.
    There are some relevant Expert Empowerment Sessions available in the archive:
    [Exchange Rate|http://service.sap.com/~sapidb/011000358700000315572008E.zip]
    [FC & SC are the same, why don't they match?|http://service.sap.com/~sapidb/011000358700000326672008E.zip]
    Also, please have a look at the Expert on Phone Newsletter May2008:
    [How to reconcile a foreign currency only journal entry for a multi-currency Business Partner|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=25494259]
    All the best,
    Kerstin

  • Foreign currency Payment using foreign currency bank account

    Hi,
    We have the following requirement:
    Functional currency : GBP
    Bank Account :USD
    Need to make payments in CAD
    Since the bank account is not in functional currency we are unable to make that multi currency payment enabled. Users do not want to create a functional currency bank account.
    Now how to overcome this situation ?

    Hi, I am referring to paying foreign currency (ap payments) using non functional currency bank accounts. Are you referring to payment or receipts in foreign currency ?
    Please refer the in 11i ap guide
    1. pg 2-104
    "Dening Multiple Currency Bank Accounts
    A multiple currency bank account is an account that accepts payments in more than one currency.
    If you define a multiple currency bank account for payments, the currency of the bank account must be the same as your functional currency."
    2. Payment Formats pg 2-140
    " When you define a bank account, you can only allow payment of multiple currency invoices if the bank account currency is your functional currency."
    These 2 states that you can pay suppliers in foreign currency only if the bank acct currency through which you are paying is same as functional currency. But my bank account currency is different from functional currency.
    Since you say you are doing , I am quite interested to find out more.Can you please let me know your currency setups on the bank and payment format.
    Thanks

  • How we can see the balance of p/l account in the sap fi/co

    if we prepare the balance sheet and profit and loss account where we can see the profit and loss account balance?

    Hi,
    I am not sure of the exact question.  But this is broadly how the P&L accounts work.
    You create the P&L accounts in the chart of accounts and then extend them to the company codes where they are required.
    Individual balances of the P&L accounts can be viewed in transaction FS10N.  There are other reports where you can see these balances, like S_ALR_87012277.
    These balances are visible for postings made during the year.
    Then for creation of legal balance sheet and P&L, you need to define a retained earnings account.  This is the account, where when you execute the balance carry forward, the balances of all the P&L accounts are moved to the retained earnings account.  So the opening balance of P&L accounts is always zero.  You can view the financial statements using transaction code: S_ALR_87012284 (Report: RFBILA00)
    Cheers.

  • How to query the opening balance for an specific account for an spec. date

    Hi all,
    for my user query I need to calculate the opening balance for an cash account for an specific date.
    Any ideas, how can I do this?
    Or may be you know a field in an SBO table that already contains information I need...
    Best Regards,
    Inna

    Hi Inna,
    to find the opening balance for an account or a business partner, please see SAP Note [1114253|https://service.sap.com/sap/support/notes/1114253] :
    Symptom
    How to find the opening balance of a business partner or G/L account.
    Other terms
    Account, customer, supplier, vendor, creditor, debitor, start, initial, first, opening balance, business partner, G/L, SAP Business One
    Reason and Prerequisites
    Consulting
    Solution
    There are several possible approaches:
    Approach 1 - Business Partner Opening Balance:
    1. Go to Business Partners -> Business Partner Master Data -> find the Business Partner
    2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
    3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
    4. Click on the button 'Refresh'.
    5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
    Approach 2 - Business Partner Opening Balance:
    1. Go to Business Partners -> Business Partner Master Data.
    2. Click on the orange link arrow next to the field 'Account Balance' in the header region of the window.
    3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
    4. Click on the button 'Refresh'.
    5. Double click on the column header 'Posting Date' to find the earliest transaction on the business partner account. This transaction could be opening balance, verify this with the company accountant.
    Approach 3 - G/L Account Opening Balance:
    1. Go to Financials -> Chart of Accounts -> click on the account name once.
    2. Click on the orange link arrow next to the field 'Balance'.
    3. Untick the boxes next to 'Posting date from', 'Display' and 'Display Unreconciled Trans. Only'.
    4. Click on the button 'Refresh'.
    5. Find 'OB' in the column 'Origin', this is the opening balance journal entry.
    Approach 4 - Business Partner and/or G/L Account Opening Balance:
    1. If using SAP Business One 2005 SP01 or earlier, go to Reports -> Query Generator -> click on 'Execute'.
    2. If using SAP Business One 2007 or later, go to Tools -> Queries -> Query Generator -> click on 'Execute'.
    3. Ignore the red system message in the bottom of the screen.
    4. Click on the pencil icon in the top left of the window, the field with 'SELECT *' will change colour to white, then yellow when activated by clicking in the field.
    5. Copy the query below:
               SELECT T0.[TransId], T0.[Debit], T0.[Credit] , T0.[CreatedBy], T0.[TransType] FROM [dbo].[JDT1]  T0 WHERE T0.[TransType] = '-2'  and T0.[ShortName]  = '[%1]'
    6. Click on 'Save' and give the query an appropriate name and select the appropriate category.
    7. Click on 'Execute'.
    8. Click on 'Existing Values'.
    9. Select the G/L account or the Business Partner name from the list and click on 'OK'.
    10. The system message 'Records retrieved by this query #' (# = number of records) will pop up. Click on 'OK'.
    All the best,
    Kerstin

Maybe you are looking for