How to collect records using BPM

Hi All,
i have a req that i need to collect records in chunks and want collect using BPM want make their single file.
i have 10 fields in one table for that i have made one datatype ,i want to collect 1lac recods 5 times in BPM and want make a single file and send it to one file.
please suggest what are the steps are req in BPM to do this.

Hi Gangadhar,
Check this links
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm (for one interface)
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm (for multiple interfaces)
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
Regards
Ramesh

Similar Messages

File to RFC with multiple records using BPM Scenario Error...!!!

Hello Guru's,
I have done the File to RFC with multiple records using BPM scenario as per the Materiel available in the sdn.sap. This involves BAPI (BAPI_MATERIEL_AVAILABILITY). I have done exactly the same what is their in the materiel. SXI_CACHE is also giving return value " 0 ". File is getting deleted from the source directory, but no file in target directory. SXMB_MONI is also showing no error (black Flag). BPM is also error free. Checked the interfaces also.
Can any one tell me what mistake would i have done.
Thanks in advance.

Hi,
There is one similar discussion I found,
FTP TO RFC using BPM
Thanks
Swarup

Collect Messages using BPM

Hi all,
        Am doing a collect message pattern using BPM. After collecting messages wen mapping is called its throwing exception. CAn you help me out in this. I ll explain.
the input i give is :
<Root>
       <Name> asd </name>
       <ID> A </ID>
</Root>
i sent thid message 5 times to BPM (using collect pattern).
the stop message is of the format
<Stop>
   <ID> A</ID>
</Stop>
wen i send this the collect block is exited and the flow comes to a transformation step which does a n:1 mapping
ie. in my mapping i add the source message type and changed its occurence to unbounded in messages Similarly in IM also i changed the occurence of source MI to unbounded. wen i test the message mapping with this
<Root>
       <Name> asd </name>
       <ID> A </ID>
</Root>
as input it gives the exception. But if i gve like this ten its showing successful.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
<Root>
       <Name> asd </name>
       <ID> A </ID>
</Root>
</ns0:Message1>
</ns0:Messages>
But how can wedo that as transforamtion happens in BPM. PLease help me out in this

Hi,
Check these links
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/5d373f5e550456e10000000a114084/frameset.htm
Regards,
Kumar

Collect Operation using BPM and

Hi Experts,
I have a scenario where Proxy to file communication happens.
1.i have to collect all the data in XI that has sent from proxy ( Sender System ) via BPM and send to file system only after every 15 mins.
2. For the same scenarion without using BPM.
i have to append ( in the file construction Mode ) the data in the file for 15 mins only.ould you
Kindly help me with these two questions with step by step procedure. Thanks in advance.
Regards,
Ruban.S

Hi,
In ESR you could go to SAP BASIS -> SAP BASIS 7.xx -> Integration Processes -> BpmPatternCollectTime. It contains the pattern/steps that you would need.
Not sure if there is a good way of doing this without bpm.
Regards,
Mark

How do you record using a phantom mic.

How can I record vocals in the GarageBand using the MacBook Pro?
Thanks.

Hi there etson!
I have just the video for you:
GarageBand '11 - Record your voice
http://support.apple.com/kb/VI200
There are other videos in the Related Videos section that may help you enhance your GarageBand experience. We also have an article online that may help you link up your third-party microphone and record from that into GarageBand:
GarageBand '11: Record sound from a microphone
http://support.apple.com/kb/PH1893
Thanks for coming to the Apple Support Communities!
Regards,
Braden

How to search records using netbeans

i'm using netbeans.....how to search records from database
pls help me

Not at all....i'm familar with java,i stucking in button coding,that is
how to match with database.
public String buttonGo_action() throws SQLException {
// TODO: Process the action. Return value is a navigation
// case name where null will return to the same page.
System.out.println("Action******");
String sname=(String) textsearch.getText();
sname = "%"+ sname+"%";
grc_risks_customer_info_tableDataProvider.setCursorRow(grc_risks_customer_info_tableDataProvider.findFirst("NAME",sname));
//.findFirst("GRC_RISKS_CUSTOMER_INFO_TABLE",sname));
getSessionBean1().getGrc_risks_customer_info_tableRowSet().setString(1,sname);
grc_risks_customer_info_tableDataProvider.refresh();
this coding is not working...that's y...

How is validation done using BPM and MDM

Hi everybody.
I have a business usecase. It is with BPM-MDM Integration. I need your comments on this.
Data is transferred/imported from ERP to MDM. This process is automized and data is imported through Import Server.
whenever the import happens, validation has to be happened like null check, format etc. Based on that the record has to be imported or it can ignore it.
Should these validation needs to be done at MDM end or at BPM?
If MDM End, should I need to use MDM Workflow as well or Is it be possible without using MDM workflow.
How can I check the non-imported data(ie. Records which failed during validation)
can I get this information from MDM level by any means, saying can we get the records which failed during validation
Is there anything which we can do from MDM side or should we do this check from BPM side?
Also Is it recommended to go with MDM Workflow and BPM as well in this usecase. (like BPM-MDMWorklfow-MDM).
Any suggestions.
Regards
Bala

Hi Bala,
As per your requirement, you can go ahead with MDM workflow. This MDM workflow will trigger on Record Import.
See, I assume that you understand the different steps of MDM workflow, like Assign, Validate, Branch, Start, Stop etc.
As your workfow will trigger on Record Import with Start step (Checkout state) and record will check-in only if it validates that validation else will get rollback.
can I get this information from MDM level by any means, saying can we get the records which failed during validation
Before Roll back you can syndicate that records also for your reference.
Start(Checkout)>Branch step(checks validation like null case and other MDM fields population etc)>If fails( Send these records to)>syndicate step>Stop1 (Rollback) else if Pass -->Stop2(checkIn)
In this way only records which are valid records gets checkin ( gets created into MDM) and failed validation records would be syndicated out of MDM for your reference before Stop step (Roll back) means not get created into MDM.
I dont have MS-Visio to test this scenario but i hope it should work..
Regards,
Mandeep Saini

How to delimit records using FM HR_INFOTYPE_OPERATION ( in background )

Hi all,
Has anyone used HR_INFOTYPE_OPERATION with OPERATION = 'LIS9' to delimit a record? I keep on getting 'A complex application error has occurred' error message. When I go into dialog mode = '2', the FM will go into the Overview Screen and I realized that the Delimit Date on the top right of the screen is not what I specify as the new record's ENDDA but the original record's ENDDA. Also I have to manually click on Delimit icon on the top left of the screen before it gets delimited.
Question:
How do I pass in the delimited date to HR_INFOTYPE_OPERATION? I put it in the RECORD-ENDDA field but it doesn't seem to work?
Thanks

rohan,
why dont you use change mode (mod) and just change the default end date to the date you want the record delimited? that is also delimiting.
is this requirement for batch job?

How to combine records using function

Hi, all
I have an oracle 10g running on a RH linux e3 server.
I have two tables like this:
CREATE TABLE "IMMUNODATA"."DEMOGRAPHICS" (
"SUBJECTID" INTEGER NOT NULL,
"WORKID" INTEGER,
"OMRFHISTORYNUMBER" INTEGER,
"OTHERID" INTEGER,
"BARCODE" INTEGER,
"GENDER" VARCHAR2(1),
"DOB" DATE,
"RACEAI" INTEGER,
"RACECAUCASIAN" INTEGER,
"RACEAA" INTEGER,
"RACEASIAN" INTEGER,
"RACEPAC" INTEGER,
"RACEHIS" INTEGER,
"RACEOTHER" VARCHAR2(50),
"SSN" VARCHAR2(11),
PRIMARY KEY("SUBJECTID") VALIDATE
CREATE TABLE "IMMUNODATA"."BIOPSY" (
"ID" INTEGER NOT NULL,
"THEDATE" DATE ,
"SUBJECTID" INTEGER NOT NULL,
"TISSUE" VARCHAR2(50),
"DATEOFBIOPSY" DATE ,
"FACILITYWHEREDONE" VARCHAR2(200),
"RESULT" VARCHAR2(500),
"BARCODE" INTEGER,
PRIMARY KEY("ID") VALIDATE,
FOREIGN KEY("SUBJECTID") REFERENCES "IMMUNODATA"."DEMOGRAPHICS" ("SUBJECTID") VALIDATE
the result of one selection is like this:
select subjectid, barcode, tissue, dateofbiopsy from demographics left join biopsy;
subjectid barcode tissue, dateofbiopsy
1 500001 lung 2003/1/1
1 500001 kidney 2005/3/4
I want to have a view of this
subjectid barcode biopsy dateofbiopsy
1 500001 lung,kidney 2003/1/1,2005/3/4
I created a function like this:
CREATE OR REPLACE FUNCTION TEST(p_subjectid IN immunodata.biopsy.subjectid%TYPE ) RETURN VARCHAR2 IS
v_tissue VARCHAR2(100),v_dateofbiopsy DATE;
BEGIN
FOR c IN (SELECT tissue, dateofbiopsy FROM immunodata.biopsy WHERE subjectid = p_subjectid)
LOOP
IF v_tissue IS NULL and v_dateofbiopsy IS NULL THEN
v_tissue := c.tissue;
v_dateofbiopsy :=c.dateofbiopsy;
ELSE
v_tissue := v_tissue||','||c.tissue;
v_dateofbiopsy :=v_dateodbiopsy||','||c.dateofbiopsy;
END IF;
END LOOP;
RETURN v_tissue,v_dateofbiopsy;
END;
The error says:
Warning: Function created with compilation errors.
SQL> show errors
Errors for FUNCTION TEST:
LINE/COL ERROR
2/23 PLS-00103: Encountered the symbol "," when expecting one of the
following:
:= ; not null default character
The symbol "; was inserted before "," to continue.
14/16 PLS-00103: Encountered the symbol "," when expecting one of the
following:
. ( * @ % & = - + ; < / > at in is mod remainder not rem
<an exponent (**)> <> or != or ~= >= <= <> and or like
between || multiset member SUBMULTISET_
The symbol ". was inserted before "," to continue.
So could I combine multiple fields in one function?
Thanks!
Qian

Also, in addition to Warren's response, the "RETURN" keyword should be followed by a single VARCHAR2 value (or a NULL):
test@ORA10G>
test@ORA10G> create or replace function my_function (s varchar2) return varchar2 is
2    v_str1 varchar2(100);
3    v_str2 varchar2(100);
4 begin
5    v_str1 := '*'||s||'*';
6    v_str2 := '~'||s||'~';
7    return v_str1,v_str2;
8 end;
9 /
Warning: Function created with compilation errors.
test@ORA10G>
test@ORA10G> show err
Errors for FUNCTION MY_FUNCTION:
LINE/COL ERROR
7/16     PLS-00103: Encountered the symbol "," when expecting one of the
         following:
         . ( * @ % & = - + ; < / > at in is mod remainder not rem
         <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
         LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
         The symbol ". was inserted before "," to continue.
test@ORA10G>
test@ORA10G> -- the following, for example, works
test@ORA10G> create or replace function my_function (s varchar2) return varchar2 is
2    v_str1 varchar2(100);
3    v_str2 varchar2(100);
4 begin
5    v_str1 := '*'||s||'*';
6    v_str2 := '~'||s||'~';
7    return v_str1||v_str2;
8 end;
9 /
Function created.
test@ORA10G>
test@ORA10G> select my_function('xxx') from dual;
MY_FUNCTION('XXX')
*xxx*~xxx~
test@ORA10G>Search this site for "pivot/pivoting/string aggregation" and you'll get a lot of examples of what you intend to do using direct sql.
pratz
Rephrased a bit to make the response politically correct... ;)
Message was edited by:
pratz

How to combine records using SQL?

If I have the following data:
Table A
order_no company_code
O001 C001
Table B
order_no po_no
O001 P001
O001 P002
O001 P003
Now, I want to combine the data as:
View A
order_no company_code po_no
O001 C001 P001, P002, P003
If can it be realized using SQL?
Thanks and Best Regards,
Su Qian

Hi Su Qian,
To get the result like this you should write a function and call that in the select query.
The function could be like this:
CREATE OR REPLACE FUNCTION TEST(p_order_no IN B.order_no%TYPE ) RETURN VARCHAR2 IS
v_po_no VARCHAR2(100);
BEGIN
FOR c IN (SELECT po_no FROM B WHERE order_no = p_order_no)
LOOP
IF v_po_no IS NULL THEN
v_po_no := c.po_no;
ELSE
v_po_no := v_po_no||','||c.po_no;
END IF;
END LOOP;
RETURN v_po_no;
END;
Now you issue the query like this:
select order_no, company_code, test(order_no) po_no from a;
This will return you what you want.
Hope this will help you.
Best Regards,
Ramesh Rathi.
OCP - DBA.
Zensar Tech Ltd.
[email protected]
If I have the following data:
Table A
order_no company_code
O001 C001
Table B
order_no po_no
O001 P001
O001 P002
O001 P003
Now, I want to combine the data as:
View A
order_no company_code po_no
O001 C001 P001, P002, P003
If can it be realized using SQL?
Thanks and Best Regards,
Su Qian

How can i record using my windows soundcard

everything is fine harware wise i just cant simply record? the yellow indicator does not come up no matter what

Not quite sure we know what you mean by the "yellow indicator"? Is this something in Audition or in Windows?
Also see the Audition Help file:
Adobe Audition Help | Connecting to audio hardware

Collect Merge Patten using BPM in XI

Hi
I want 3 files to be sending data and only one file receiver.
How is it possible using BPM in XI?
Can anybody provide pdf on end to end Scenario of this type.
Points will be given?

Hi,
1.Inside the BPM have a Fork step with 3 branches and in branch have a receive step to receive the files from the Sender.
2.Use correlation to Merge the files of the same data by identifying a common field in all the three file's.
3. In the Transformation step Map the 3 Input MT to one Output MT.
4.Send the Message to the Target system.
Go thru this Blog for <a href="/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi Correlation in XI</a> by Sravya Talanki
Go thru this Blog :<a href="/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm of Multiple type IDOCs in BPM</a> BY Pooja
Design your scenario to receive File instead of the IDoc as specified in this Blog...
Regards
Santhosh
Remember to set the thread to solved when you have received a solution
[url=Use a Good Subject Line, One Question Per Posting - Award Points; Use a Good Subject Line, One Question Per Posting - Award Points[/url]

How to collect to different files into one message

Hi,
I have the following scenario:
Two (5Mb) Files with different file structures each ->
XI (transform and generate a single structure record) ->
Insert a record in a DB for each new record generated
Let suppose file1 has order headers - one order per line -and file2 has the corresponding order items - one item per line, e.g;
File 1
OrderNr Description
1        A
2        B
3        C
File 2
OrderNr   ItemNr   MaterialCode ....
1         1        111
1         2        222
1         3        555
2         1        888
2         2        777
3         1        111
Imagine I want to insert a record in the database for
each order/item like this
OrderNr ItemNr Description MaterialCode .....
1        1      A           111
1        2      A           222
1        3      A           555
My real scenario is a little more complicated but never mind for now.
I need to collect the two different files with two different file structures into the same message. Although I have read about the subject I am not sure about how to do it using BPM because there isn't any field I could use to correlate file1 with file2 - I can only correlate a record of file1 with several records of file2. I simply know that the two files will be available in a specific directory once a day at 06:00AM.
First question is:
How can I collect the two messages originating each from a different file into only one message with two different subtypes one for each file structure?
Because my background is ABAP I could do it with a workaround for temporarily storing the info from each file into database tables in XI and then correlate the info from the two files to generate a single message.
Like this
File1 -> XI -> INSERT DATA XI ZDB1 (via ABAP Proxy or RFC)
File2 -> XI -> INSERT DATA XI ZDB2 (via ABAP Proxy or RFC)
Them I could use an event to check when the two tables have all the data from both files. I could then combine the data from the two tables and start another integration process like this
XI SERVER (ABAP Proxy) -> XI Integration Server -> Third-party (JDBC)
But this way I would have to code the hole data conversion which is not a good idea from the perspective of XI (EAI/Broker).
Maybe I sould use BPM. But how?
Futhermore:
Is BPM performant enough (we are talking about files with thousand of records)?
Thanks in advance
Diz

Hi,
for N:1 Multimapping you have to use BPM.
After going through this weblog you will be quite familiar with how to collect 2 messages into one message.
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
Steps:
1. Create a abstract/ inbound / outbound interfaces. (in your case 3 /1/2).
2. Perform 2:1 Multimapping.
You can specify more than one message in either side.
Just go to message tab in MM.
3. Now follow the blog and you will get a output in the form of abstract interface.
4. Define JDBC reciever Channel as usual.
Your database will be updated.
Just try this out.
Regards
Piyush

Collecting Records till some time

Hi all
we are collecting vendor records from multiple legacy system and bundling to one idoc and sending it to SAP and also we need to collect vendors till certail period or until we receive next vendor record with same acount group. we are using BPM for this
How to achieve the above condition of collecting vendor record till some time or till we receive next vendor record using BPM?
Regards
Bhasker

Hi,
please have a look at this example scenarios:
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
Regards
Patrick

File to RFC Multiline using BPM

Hi Experts,
I am working on File To RFC Multiple Records using BPM. I am getting the below error. When i am activating Integration Process. I got the error as Element should not return Multiline Value. So i have changed the Message Mapping Occurance in Signature Tab to O to Unbounded. I am getting the below error in SXMB_MONI. Please check and guide me how to proceed further.
Regards,
GIRIDHAR
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi Giridhar,
Check below thread:
BPE_ADAPTER UNKNOWN_MESSAGE
Regards,
Krupa

How to collect records using BPM

Similar Messages

Maybe you are looking for