Collect Merge Patten using BPM in XI

Hi
I want 3 files to be sending data and only one file receiver.
How is it possible using BPM in XI?
Can anybody provide pdf on end to end Scenario of this type.
Points will be given?

Hi,
1.Inside the BPM have a Fork step with 3 branches and in branch have a receive step to receive the files from the Sender.
2.Use correlation to Merge the files of the same data by identifying a common field in all the three file's.
3. In the Transformation step Map the 3 Input MT to one Output MT.
4.Send the Message to the Target system.
Go thru this Blog for <a href="/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi Correlation in XI</a> by Sravya Talanki
Go thru this Blog :<a href="/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm of Multiple type IDOCs in BPM</a> BY Pooja
Design your scenario to receive File instead of the IDoc as specified in this Blog...
Regards
Santhosh
Remember to set the thread to solved when you have received a solution
[url=Use a Good Subject Line, One Question Per Posting - Award Points; Use a Good Subject Line, One Question Per Posting - Award Points[/url]

Similar Messages

Collecting Idocs without using BPM

Hi Experts,
I am working on a sceanrio, where Idocs are coming from sap and we need to generate a single Flat file out of them.
For this scenario first we need to collect the Idocs and then process them to make a single file output.
To achieve the same I am using the BPM to first collect the Idocs and make a packet out of them and then processs it to generate a single flat file.
Can someone please suggest me that, How can we achieve the same without the BPM.
If yes, how can we do that?
Thanks in advance.
Regards
Pradeep

Pradeep ,
Option 1 : /people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
here you collect them as a file and file is picked up and sent to the target
Option 2 :
in WE20 in ERP set idoc package to 50
in XI sender idoc channel - package to 50
XI will receive 50 IDOCs at once...
(courtesy Michal....till then i thought there is no sender idoc adapter )
Option 3 : collect using BPM.
Option 4 : This is what i woould suggest....no need of collecting you can send one idoc at a time generate the file.....why do u want to collect?
Edited by: Tarang Shah on Mar 20, 2009 7:38 AM

Collection of IDOCs using BPM

Hi Experts,
I am trying collection of IDOCs by using BPM.
I ran into problems and In moni, the error is
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
Details of above error in trace is :
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface BLAORD.BLAORD03*</Trace>
<Trace level="1" type="T">select interface namespace urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface UpdatedContracts_abs_idocs*</Trace>
<Trace level="1" type="T">select interface namespace http://com/UpdatedContracts/</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA" />
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
Here i am trying to collect IDOCs for 5 minutes and i need to send them in XML format. Here i have mapping logic and that logic is working perfectly.
What i am dong is
1. I am sending IDOCs from R3 system to BPM in XI. ( Here to push IDOCs from R3 system to BPM, do we need to do extra ALE settings. Actually With out BPM simple IDOC to File is working fine, With BPM only i am having error. )
2. How to reslove above problem. AS per my understanding everthing is fine.
Thanks,
Subbu

Hi Rama Subbarao,
Error: Check with your loop condition and process steps.
Collecting of IDOCS using BPM is good, If u want to send the 100 IDOCS per one hour with single BPM it will takes times , Some performs issues and hardware issues are raising.
Suppose if u send 1000 Idocs per one hour it will takes much time.
Other Process:
The collecting of IDOCS it will be downloaded into FILE System.Once IDOCS is downloaded into FILE, it will be not changed the IDOCS.
Using FILE Adapter we send the flatfiles data from FILE System to XI. if u using this process performance wise its very good.
Regards,
Sateesh N

Merging files using BPM-Prod Issue - JDBC to File.

Hi all,
We had a scenario in which data is available in two database tables and that data needs to be merged and dropped in a File system.
To meet this requirement we have developed a BPM with constant correlation and it was working fine.
But some days one file wont get generated as the JDBC adapters are polling the DB tables based on date.So there are chances that records wont be present in DB for that particular date and file may not be created.So if only one file is generated my entire business scenario fails as the fork step used to merge two files will not be completed.
The records which is pulled from DB table is based on data an i have written UDF based on these dates.
Could someone help me in finding a solution.
Thanks & Regards,
Lekshmi.

Hi ,
I have included a deadline and exception branch in my scenario and it seems to be working fine.Need to do some more testing in this regard.
But i have one doubt regarding this issue.In the transformation step i have used multi message mapping where i have mentioned the occurrence of both input messages as 1. I was expecting this scenario to throw an error at transformation step (since only one message was given as input )once i have made the changes but surprisingly it didnt happen.Could you pls tell me why this didnt happen..
Rgds,
Lekshmi.

Message merging by using BPM i have some issue

sender sends 4 messages, receiver received as two merged message ,
my question is 1.how many operation mapping we required.
                        2.how to develop our graphical definition in bpm.(list out step by steps).

Hi amardeep.s.
good question.......
There are 4 sender sends 4 messages to 1 receiver received as 2 merged messages.
s1_msg1.....
                          ......................> r1_merg_msg1
s2_msg2.....
s3_msg3.............
                             .......................>r1_merg_msg2
s4_msg4.............

Collecting multiple idocs using BPM

Hi,
I have a scenario where idocs sent from R/3 system are collected in Xi and posted as a single message in the file. We have done all the configurations both in XI and R/3 pertaining IDOC.
When we trigger an idoc in the R/3 system,we are able to see the message that IDOC has been sent to XI system. But we are unable to see any of the message transfers in SXMB_MONI.
(In simple words our interfaces are not getting triggered.)
Could anyone help us in rectifying the problem?
Thanks & Regards,
Vishnu.

When you trigger the IDOC from R/3
--Did u complete the configuration part of sending the IDOC to XI, have you created the TRFC POrt in R/3, cross check the RFC dest which you are using here is pointing to Right Xi box?
Your configration looks fine for atleast to take IDOC in XI, rest i am not sure at this point.
---No errors in the SM58 on R/3?
---IDOC metadata is loaded in XI? do u c any entry in the IDX5?
--Is your IS been configured wth the tracle level parameters, if yes set it to 3 value
--is runitme paramter LOGGING, LOGGING_PROPOGATION,LOGGING_SYNC present in SXMB_ADM?
if you have these then atleast you should c an entry in SXMB_MONI with with either sucessfull or failed state.
More importanatly the LS name of the R/3 is according to standards what SAP says in SLD?
Edited by: Nisar Khan on Feb 28, 2008 11:00 AM

Merging files in BPM using correlation

Hi all,
I am dng a file merging senario using BPM.Please let me knw any blogs or some help in dng the same.
Rgds
Aditya

Hi aditya
Check this blog also...
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Refer to that link. you will find the BPM in your SAP BASIS (SWCV) in the namespace patterns
Pls reward if useful

Collect Messages using BPM

Hi all,
        Am doing a collect message pattern using BPM. After collecting messages wen mapping is called its throwing exception. CAn you help me out in this. I ll explain.
the input i give is :
<Root>
       <Name> asd </name>
       <ID> A </ID>
</Root>
i sent thid message 5 times to BPM (using collect pattern).
the stop message is of the format
<Stop>
   <ID> A</ID>
</Stop>
wen i send this the collect block is exited and the flow comes to a transformation step which does a n:1 mapping
ie. in my mapping i add the source message type and changed its occurence to unbounded in messages Similarly in IM also i changed the occurence of source MI to unbounded. wen i test the message mapping with this
<Root>
       <Name> asd </name>
       <ID> A </ID>
</Root>
as input it gives the exception. But if i gve like this ten its showing successful.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
<Root>
       <Name> asd </name>
       <ID> A </ID>
</Root>
</ns0:Message1>
</ns0:Messages>
But how can wedo that as transforamtion happens in BPM. PLease help me out in this

Hi,
Check these links
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
http://help.sap.com/saphelp_nw2004s/helpdata/en/76/5d373f5e550456e10000000a114084/frameset.htm
Regards,
Kumar

Collection of messages in BPM

Hi Experts,
Collection of messages in BPM is not working,IP is executing for each Idoc.Actually i have done the sceanrio Idoc to File,Here I am getting multiple IDocs of same type from R3 when run a transaction and i would be generate a single file for all the IDocs.For this i have changed the occurence of Idoc from 1..1 to 1..unbounded and done the mapping betweeen these two. i have done bpm just like as standarad bpm pattern "BpmPatternCollectTime".I mentioned the time as 1 minute.in transformation step i had mentioned interface mapping for 1..1 Idoc to 1..unbounded Idoc and the real mapping conditions of this sceanrio is carried out after the bpm. The Idoc's are generating from R3 with the time diffrence of 3 secs.So it should generating a single file what ever the no.of idocs populating within a minute.
In monitoring it showning for bpm, its trigerring for each incoming Idoc and procesing successfully.
For Ex: Two idocs are coming from R3 then BPM triggers twice
What could be the possible reasons for this or i have done any thing wrong.
Any ideas.., Thanks in advance
Cheers
Tiger Woods.

HI,
Try to Use Idoc packaging. also see the below links
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm - collecting IDocs without BPM
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
Regards
Chilla

Problem in merging two files using BPM

Hello Frens,
I am doing a scenario for merging of two files N:1 using BPMu2026
I have to merge two files into one file. The two input files are as below :
File1 : Id, Name, Age, Place
File2 : ID, Street, Adrress
And output File is : ID, Name, Age,place, street, Address
For this scenario I have defined three datatypes , message types and the message interfaces as below :
For File1: Mi_file1_ob, Mi_file1_abs
For File2: Mi_file2_ob, Mi_file2_abs
For output : mi_output_ib, mi_ouput_abs
In interface mapping I have selected two source interface and one targetu2026
For Integration process I have selected two receives as two branches of fork and transformation to collect them and a send..
In IR part I have defined three communication channels sender1, sender2 and a receiver . I have imported the integration from IP and rest is sameu2026
I am facing a problem for getting the outputu2026
When I checked in sxmb_moni everything is fine and sxi_cache and the return code is also 0 but I am not getting the outputu2026
Can anyone help me in finding out the problem..
Thanks in advance...

Hi,
Have a look into these blogs and links
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
you can design the ccBPM. To know more about Correlation -with e.g
http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
Re: Correlation
http://help.sap.com/saphelp_nw04/helpdata/en/a5/64373f7853494fe10000000a114084/content.htm
i hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

File merge using BPM

Hi,
I am trying to merge few files using BPM . I have tried for splitting the files . Can any one guide me how to proceed with the correlation and Receiver Determinations.

hi,
chek the below blogs,
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
Using a BPM to collect messages for a set interval of time
/people/daniel.graversen/blog/2006/09/07/using-a-bpm-to-collect-messages-for-a-set-interval-of-time
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
regards
chandra

Collect Multiple IDOC(Single IDOC type) to single file using BPM

Hi All,
When i am generating multiple IDOC for the same message type, i am getting multiple payload for the same as a result i used to get multiple files generated in application server.
Now if i use BPM only to collect multiple IDOC to a file then what all the steps that i need to follow for the same.
Ex: I want to post 10 IDOC for a single IDOC type,, Now using BPM in XI i want to collect all the 10 IDOCs with multiple payload into one single message and then want to process this in XI to generate the file.
It would be glad if anyone refer me a good step by step blog for the same.
Thanks in advance,
Jay

Thanks a lot Abhisek.
I have also got a blog explaining the exact thing. But in the blog the ID part was missing which is present in the link you have provided.
I will be glad if you can through some light on the ID part,, however the IR part and the BPM part is now mostly okay to me.
I will configure this today only,, and may seek your help for any huddle.
Thanks a lot once again.
Regards,
Jay.

Collect Operation using BPM and

Hi Experts,
I have a scenario where Proxy to file communication happens.
1.i have to collect all the data in XI that has sent from proxy ( Sender System ) via BPM and send to file system only after every 15 mins.
2. For the same scenarion without using BPM.
i have to append ( in the file construction Mode ) the data in the file for 15 mins only.ould you
Kindly help me with these two questions with step by step procedure. Thanks in advance.
Regards,
Ruban.S

Hi,
In ESR you could go to SAP BASIS -> SAP BASIS 7.xx -> Integration Processes -> BpmPatternCollectTime. It contains the pattern/steps that you would need.
Not sure if there is a good way of doing this without bpm.
Regards,
Mark

Problem: Merging same Files into 1 File using BPM, Receiver File empty.

Hi All,
I am trying a scenario where I need to merge two similar files into one single file (Append) using BPM
I am following the same structure as defined in the predifined BASIS Namespace i.e. http://sap.com/xi/XI/System/Patterns for Integration Process BpmPatternCollectPayloads. The only thing I changed is that inside my loop I am having a container dat counts till 2.
Now when m testing d interface, the file @ reciver directory is generating, but without any data i.e an empty xml is generating. PI is also not showing any error anywhere.
My Message mapping structure is as follows:
Sender Side:
<Message>    (1..1)
   <Message1> (1..1)
       <MT_myMessageType> (0..unbounded)
                <Records> (1..1)
                        <Id(Used for correlation)> (1..1)
                        <Name>   (1..1)
                        <Address> (1..1)
Receiver Side:
<Message>    (1..1)
   <Message1> (1..1)
       <MT_myMessageType> (1..1)
                <Records> (0..Unsbounded)
                        <Id(Used for correlation)> (1..1)
                        <Name>   (1..1)
                        <Address> (1..1)
Can anyone plz help me.

Inbound Message after PE, is empty, so the Request Message Mapping (Technical routing) step is also showing a Empty XML without any structure.
So you mean to say The inbound Message for BPM -
> File is empty?.....this clearly means that
1) the transformation step in BPM is not producing the required XML
2) some validation is imposed in the mapping...which if not satisfied is not creating the target structure.....
Can you ensure that the transformation step outside the block is working properly....and that your BPM design is exactly same as in BpmPatternCollectPayload (except the number of times the loop is executed)......
just few days back even i was stuck in a similar situation....the transformation step outside a Block was not producing a particular element in the target......i made some dummy changes in the mapping and then again included in the transformation step and then my BPM worked fine.......so the conclusion is either the data from block is not going into the transformation step or the transformation step is not creating the target.....
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 30, 2009 12:10 PM

Merging two files using BPM

Hello frens,
I have to do a scenario which will merge to files into one file using BPM....
Means for example :
File 1 contains these fields:
First Name
Last Name
File 2 :
First Name
Last Name
The output File which I required is :
First Name
Last Name
First Name
Last Name
Can anyone send me the step by step procedure fr this scenario?
Thanks in advance

HI go through these links,
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
go through these links,
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
go through these links,
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Collect Merge Patten using BPM in XI

Similar Messages

Maybe you are looking for