How to Color Code Tags

HI,
Usually when tagging scripts, each department is a different color. I.e. Speaking actors, red, props purple, etc.
How do I assign colors so that when a prop appears in the screenplay it will be purple? I noticed on still image in documentation where it looked like this was happening but there was no documentation as to how to achieve this.
When the script is exported to pdf, will it still show the color? In Celtx I was able to color code the break down and see it onscreen, but when the script printed in pdf format the text became black again.
Thank you,
Catherine

Hi Abu,
How did you achieve this, i have a similar requriement. could you please share the solution with me.

Similar Messages

How to Color-Code Categories on Desktop?

I just purchased a Palm Z22 after years of owning a T5. I can choose colors for the categories on the handheld, but cannot get any color-coding on the desktop. Any suggestions on how to do this? Also, how to change the background colors on the desktop as well?
Post relates to: Palm Z22

Hello legendeld-
Would you please add the suggestion to color code events? It strikes me as odd that Palm has removed a very useful piece of functionality that has been in its software as long as I can remember. I upgraded to 6.2 to fix the problem where undated tasks were given the date "12/31/2031" in Palm Desktop 4.1.4. Finding the removal of category colors was not a welcome result. I'm certain it's not making your other users happy either, especially after waiting a very long time for this upgrade.
Thanks very much,
Sean
Post relates to: Centro (Sprint)

How to Color code the list items if Issue Tracking lists in Sharepoint 2010 SP1

Hi, Can any one guide me in making the list tasks color coded according to the status of the issue.
as if issue is Resolved ( green line ), Active ( red line ) etc.
example as following:
I have read a lot of blogs, but none have step by step guide. a step by step guide will be excellent. Thanks in advance.
http://blog.pathtosharepoint.com/2009/02/26/highlight-rows-in-sharepoint-lists/
http://blog.pathtosharepoint.com/2008/09/01/using-calculated-columns-to-write-html/
etc
Thanks.

Do you have SharePoint Designer 2010 installed?
Open your site in sharepoint designer
click lists and libraries
click the name of your list
in "views" on the right, click "new..." and give it a name.
in this new view of the list, click in one of the cells of the actual list of issues, so that the contextual ribbon at the top will give you all the options you need.
Click "Conditional Formatting" in the ribbon. This will let you pick "row".
Then you just have to define your conditions:
if priority is equal to (3) Low, then pick yellow as the background color. Do the same type of thing to create the other 2 conditions.
Laura Rogers
SharePoint911: SharePoint Consulting
Blog: http://www.sharepoint911.com/blogs/laura
Twitter: WonderLaura
Books:Beginning SharePoint 2010: Building Business Solutions with SharePoint
Using InfoPath 2010 with Microsoft SharePoint 2010 Step by Step

Color code problem

Hello.
I have this code:
colors = [0xFFCC00,
0xFFFF00];
alphas = [100, 100];
ratios = [0, 0xFF];
matrix = {a:100, b:20, c:5, d:100, e:0, f:10, g:100, h:10,
i:5};
beginGradientFill("linear", colors, alphas, ratios, matrix);
I use it to fill a clip with a gradient color.
I want the second color (in first line) to be taken from a
variable.
I tried:
my_color = "0x"+"FFFFCC";
colors = [0xFFCC00,
my_color];
alphas = [100, 100];
ratios = [0, 0xFF];
matrix = {a:100, b:20, c:5, d:100, e:0, f:10, g:100, h:10,
i:5};
beginGradientFill("linear", colors, alphas, ratios, matrix);
It doesnt work, it doesn't read the variable as a color and
the color it sets is black.
Anyone knows how the color code should be composed so that I
can have that color code taken from a variable?
Thank you.
- Adrian.

quote:
Originally posted by:
Rothrock
I'm not certain, but I would try:
my_color=0xFFFFCC;
How does that work for ya?
Hi.
That would normally work as you wrote it but I need the color
to be made from a variable value that doesnt contain the # or 0x.
So I have a value as "FFCC00" and I cannot merge the 0x with
it because it only allows the color code to be added after 0x and
not a variable name.
a_variable="FFCC00"
my_color = "0x" + a_variable
that doesnt work. It only works if I type color code
directley after the 0x as you said 0xFFCC00.
Do I make sense ? :)

How to apply WebApp tags to CSS layout code

Does anyone know how the system render tag code so that tag_fields can be applied to CSS. i.e. we want to use a tag_field to apply colour to color:{tag_color}
The system keeps stripping out the code color:{tag_color}
Does anyone know if it is indeed possible to do this?

Thanks Liam. For colours I was using the most basic of defaults which also acted as labels in the WebApp so 'white', 'yellow' and 'green'. Field type is radio button called 'status'. I tried numerous things:
1. Inline override: <tr class="trcontent" style="color:{tag_status};">
2. DIV wrapped: <tr class="trcontent"><div style="color:{tag_status};">
3. Defined in the stylesheet: <tr class="trcontent">
.trcontent {color:{tag_status};}
In cases 1 and 2, BC strips out the style code which seems odd it would do that, although I can't see that it is greatly different from yours.
In 3 the code is unresponsive for obvious reasons (double curly brackets).
I will try your example above which is a great idea - thanks for sharing.

How to delete other files(yellow color code) from the hard drive, how to delete other files from the hard drive

how can i delete the yellow color code items from my hard drive? What are these other files anyway? I wanna save some memory space from my storage.

Macbook Pro community is here
Following thread could solve your question.
https://discussions.apple.com/message/19030300#19030300

How do HEX codes affect CMYK Process colors?

I just received a banner for a client and their logo had two different blacks utilized within different letters of the text.
Basically, the logo has the word Barn in it and the "B" looks more brown in comparison, with the rest of the letters ("arn") as black.
Under closer examination, I discovered the "B" in the word Barn had a different HEX code than the rest of the letters even though all of the letters are all 100K black.
Color of the B: Hex #231F20
Color of ARN: Hex #010101
What really throws me off is that the black used in the letter "B" is a default process swatch in Illustrator in the Greys folder.
I'm not sure how the colors changed in my design process, but I have never taken hex code into account when designing. I view it as 100k black should print 100k no matter what. In trying to decipher what happened, as well as prevent this from occuring in the future, I would very much appreciate any explaination on this occurance.
Obviously I intended all of the blacks to print the same shade of black (again, I am not sure how the B was changed while designing the banners), but why would hex code affect anything at all? Shouldn't a color (especially a process color) print at 100k?
Also, why would the Illustrator process color swatch that is included within the defaults and listed in the grey folder print more brown than my other letters?
THANK YOU!

First before anything make sure you are in the correct file >> document color mode
RGB - Web or DIgitial Banners
CMYK - Printed Banners
There is not one CMYK value for every one RGB value, so therefore you have three 100k screenshots, with different RGB values. If you file is in document color mode CMYK you should be good for getting 100k to print. If you are in doucemtn colro mode RGB, then you will have 3 differetn values for the screenshots shown.
You ask a very good question, as this is often overlooked, and can get confusing. Remember that whatever document color mode your color panel should always match when entering numbers. Having a doucument color mode of CMYK, and entering values in RGB is useless and really should not even be allowed.

How do I replace image color with an exact html color code?

I simply want to change the color of a small pic to an existing html color code, 3399CC. The pic is very simple, and only has one color. In Photoshop CS4, I go to: Image -> Adjustments -> Replace Color. For the new replacement color, when I type in 3399CC, it doesn't give me that color - it gives some other shade of that color. (I can tell because I use a program that tells me the exact html code a color is when I hover my mouse over it). It seems the only way to really get the color you want is to adjust the sliders (hue, saturation, and lightness). But it'd be practically impossible to play around with every increment of those sliders until I get the exact color code.
There's got to be a way to simply enter the html color code and have the pic changed to that color. Does anyone have any idea?

Turns key. WhirrRRRrrrrRRRrrrr.... Nothing. (I answered in the other thread)
Perhaps I've had too much coffee today, because I just got a clear vision of Bart Simpson, at the board, chalk in hand...
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
SRGB IS KING!!! SRGB IS DEAD!!! LONG LIVE SRGB!!!
-Noel

How to increase Code folding tag width

Is there a way to increase the "hint" size of a folded (collapsed) code tag. I only get about 4 letters which is not enough to tell me what the folded code is.
Thanks !

Well that's too bad, the tag doesn't tell you enough to be useful as a placeholder and you have to select the tag for the tooltip to work. They really need a pref to set the width. This just makes this feature all but useless to me.

How Do Mobile Codes Work? FAQ

You may have seen them in our weekly ads, on BestBuy.com, or on signs in our retail stores: two-dimensional images that look similar to traditional bar codes, but are irregular and often square. Ever wonder what they are? They’re Mobile Codes!
What is a Mobile Code?
A Mobile Code is any two-dimensional (DataMatrix or QR code) or linear bar code (UPC) which can be read by a smart phone, linking the physical world with the on-line world. Some bar code symbologies are in the public domain, such as UPC and DataMatrix and some symbologies are proprietary (e.g. Microsoft’s Tag and EZ codes). Bar Code scanners today are “image scanners,” and since most smart phones have cameras built into them, we can now use them as personal bar code scanners!
Do I need software to read a Mobile Code?
Yes. The Best Buy Mobile App is free software you can download to your phone that contains a bar code reader. The reader will scan UPC and QR codes for products carried by Best Buy. To download the reader, simply follow these instructions:
1)      Text “APP” to 332211.
2)      Click on the link that is returned
3)      Download and install the Best Buy Mobile App on your phone
4)      Launch the app, push the Product Scan button, and hover the phone over the code.
Try this one:
You can also download the app through several platform-specific app stores:
         iPhone via Apple App Store
         Android Phone via Google Play
         Windows Phone and Touch Screen PC via Windows Phone Store
Additional app features can be found on http://www.BestBuy.com/App.
What phones are supported?
The Best Buy Mobile App is available on most iPhone, Android, and Windows Mobile devices. It is also available for Touch Screen PCs. iPad version coming soon!
What service plans will I need?
The service relies on a data plan from your provider or the free Wi-Fi network available in each of our retail stores. The amount of bandwidth consumed varies based on the product experience rendered. If you do not have an unlimited data plan, please plan accordingly. Remember, watching videos can use more bandwidth than viewing mobile web pages.
What type of bar codes can I scan with the Best Buy Mobile App?
The Best Buy Mobile App reads QR (Quick Response) Codes, which are the square two-dimensional bar codes with the three smaller squares in the upper right and left of the bar code and in the lower left.   The Best Buy Mobile App can also read UPC codes (the codes used at cash registers in stores). The app does not currently read Data Matrix codes which are square two-dimensional codes, but they don’t have the three smaller squares in them.
What will happen when I scan the Mobile Code?
After reading a Best Buy Mobile Code, you will be taken to a mobile web page that contains item specific information. You can use the Best Buy Mobile App to compare a number of products or narrow your selection of items based on parameters you select while in the store.
Is there any personal information involved?
No personal information is obtained from your phone. If you have the Best Buy Mobile App and have logged in, your My Best Buy membership information may be used to create a personalized experience.
How do mobile codes work?
The Best Buy Mobile App includes the software required to turn your phone into a scanner. All you need to do is initiate the scanner and hover the phone over the code. The app scans the code and launches the corresponding experience. It’s the best of both worlds: you can be online and in the store at the same time!
How do I save the data for use later?
On the iPhone and Android, add the product to your cart. Products added to your cart are available until removed. A list of recently viewed products can also be accessed through the main app menu.
What prices will I see on my mobile device?
You will see our regular BestBuy.com prices. In some cases they may vary from the in-store price.

If you touch the left side of the telephone number field, you get a drop down Label from which you can select the type of number it is to be.

How to color a text(font) in GRID?

hii..can i color a <b>tex</b>t(not cell using slis_layout_alv-info_fieldname) in GRID display..if so please give me an idea or sample code... thanks in advance..

Check out these threads.
Color Cells in ALV Grid
Change Color of Cell in ALV Grid
How to color a row of alv grid
Reward points for useful Answers
Regards
Karthik

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

3D Map - Color Code and Cursor Tracking

Hi, I need some help trying to implement some user interface functionality for a program I am developing.
This will be a tuning tool for automotive ECU. The program will be reading in two signals (Y-axis is RPM, X-Axis is manifold pressure) and use a 2D interpolation to output a Z value to be used in a calculation. There are two pieces I'd like to add to this.
1. Color code the cells based on the cell value in relation to the max and in of the entire 2D-Array
2. Have a live currsor that tracks the current cell of the 2D array and highlights the cells that are being used in the interp calculation so it makes it easier for the user to make changes and calibrate the tables.
3. BONUS: An easy way to be able to select a range of cells and increment them by a set amoun or scale them all by an imput amount (like scale range by 90%).
Basicly, I'd like to recreate some of the user interface functionality of the software shown below in the second picture and the video linked below.
VIDEO: https://www.youtube.com/watch?v=OkVUJCy0sJ4
VIDEO: https://www.youtube.com/watch?v=oeZc-ka6ago (at 16:45 you can see a good example of the currsor tracking through the cells as teh two inputs change)
-As you drive and the RPM and loading changes there is a blue ball that tracks on the table the current x-y location of the 2D map and the four coresponding cells around the ball are highlighted to show witch of these cells are being used in the calculation so the user can easily alter these cells in real time to tune the output he is looking for. I'd like to be able to highlight, or blink either a single cell closest to the current value, or the 4 corners around it and have it update real time as the user drives the car.
Any ideas of how to implement this kind of functionality? The current VI is attached. I should note the x-array and y-array won't necessarily always be constant spacing between cells.
Thank you for any help in advance!
Attachments:
3D Map Color Coded & Currsor.vi ‏17 KB

Okay, so I made some progress on this. I was able to use an intensity graph to visually color code the relative position of the cells. Is there a way to make the 2D array translucent and overlay the color array intsity graph behind it? is there a better way to do this.
I was able to get the closest current cell value to update as black and track around live on the intensity graph. I did this by temporarily setting the cell's value to 0. Is there a way to somehow highlight the actual cell on the 2D-Array instead?
The code is attached. I added a random sine wave input to simultate some signals for the x and y input. The Y array now runs in reverse order which made it tricky to get some of the functions to work properly so I had to use a 2D transpose and 1D reverse array to get it back in the right form. There's probably a better way to do this.
Any help is great appreciately and rewarded with Kuddos!
Attachments:
3D Map Color Coded & Currsor (Rev B).vi ‏33 KB

How can we get tag of XML file using SAX

Hi ,
I'm parsing one SAX parser , I'have almost done this parsing. i have faced problem for one case, i'e how can we get tag from XML file using SAX parser?
XML file is
<DFProperties>
<AccessType>
<Get/>
</AccessType> <Description>
gdhhd
</Description>
<DFFormat>
<chr/>
</DFFormat>
<Scope>
<Permanent/>
</Scope>
<DFTitle>gsgd</DFTitle>
<DFType>
<MIME>text/plain</MIME>
</DFType>
</DFProperties>
I want out like GET and Permanent... means this one tag which is present inside of another tag.
Handler class like
public void startElement(String namespaceURI, String localName,
               String qName, Attributes atts) throws SAXException {
if(_ACCESSTYPE.equals(localName)){
               accessTypeElement=ACCESSTYPE;
public void characters(char[] ch, int start, int length)
               throws SAXException {
if (_ACCESSTYPE.equals(_accessTypeElement)) {
               String strValue = new String(ch, start, length);
               System.out.println("Accestype-----------------------------> " + strValue);
               //System.out.println(" " + strValue);
public void endElement(String namespaceURI, String localName, String qName)
               throws SAXException {
if (_ACCESSTYPE.equals(localName)) {
               _accessTypeElement = "";
. please any body help me

Hi ,
I have one problem,Please help me.
1. How can I'll identify where exactly my Node is ended,means how how can we find corresponding nodename? in partcular place
<Node> .............starttag1
<NodeName>Test</NodeName>
<Node>................starttag2
<nodeName>test1</NodeName>
</Node>..................endtag2
<Node>.....................starttag3
<NodeName><NodeName>
<Node> .........................starttag4
<NodeName>test4</NodeName>
</Node>.......enddtag4
</Node>...........end tag3
</Node>............endtag1
my code is below
private final String _NODENAME = "NodeName";
private final String _NODE = "Node";
private String _nodeElement = "";
     private String _NodeNameElement = "";
public void startElement(String namespaceURI, String localName,
               String qName, Attributes atts) throws SAXException {
if (_NODENAME.equals(localName)) {
               NodeNameElement = NODENAME;
if(_NODE.equals(localName)){
     System.out.println("start");
     if (_NODENAME.equals(localName)) {
               NodeNameElement = NODENAME;
public void characters(char[] ch, int start, int length)
               throws SAXException {
if (_NODENAME.equals(_NodeNameElement)) {
               String strValue = new String(ch, start, length);
               String sttt=strValue;
               System.out.println("NODENAME: ************* " + strValue);
if(_NODE.equals(_nodeElement)){
               if (_NODENAME.equals(_NodeNameElement)) {
                    String strValue = new String(ch, start, length);
                    String sttt=strValue;
                    System.out.println("nodevalue********** " + strValue);
public void endElement(String namespaceURI, String localName, String qName)
               throws SAXException {
if (_NODENAME.equals(localName)) {
               _NodeNameElement = "";
if(_NODE.equals(localName)){
               System.out.println("NODENAME: %%%%%%%%%");
please help me. How can I figure node ending for particular nodename

How To Color a Text string using Regex (java.util.regex)

Hello,
How can I color a text string using regex class in 1.4?

Yes, did you notice it said something about incredibly vague functionality?
Let me break it down for you
> How can I color a text string
Strings do not have color... You can color a component (a label, a button), but you can't color a string
> using regex class in 1.4?
Using a regular expression? How would a regular exression color anything? Do you have embedded color codes? Are you searhing a string for some secret word?
What are you talking about?

How to Color Code Tags

Similar Messages

Maybe you are looking for