How to compare 2 different columns

Hi experts,
I have a report with the following structure:
account ---- booking account----- D/C------ balance
ac1-------------null---------------------- D---------- 100
ac2-------------b2------------------------C----------- 200
I need to compare b2 and ac1 if they are different then I'll to apply a conditional formatting.
Is there any way to perform this comparison
Regards
Adil

Hi Adil,
don't know if adding a new column making use of an analytical function (lag) can solve your problem.
In that case I think you should be able to get ac on the same level as b2. By adding another extra column you can compare them and base your conditional format on this one.
HOpe it helps you out.
Kr,
A

Similar Messages

How to compare 2 columns in a cross tab

Hi,
I need some idea on how to compare 2 columns in a cross tab in Deski.
Original Table is like this:
Type..............ID...........Name
Type1............1............BO1
Type1............2............BO1
Type1............3............BO2
Type2............1............BO7
Type2............2............ --
Type2............3............BO5
I did Slice and dice to the original table and now it looks like a cross tab
......................1..............2............3
Type1.........BO1....... BO1.......BO2
Type2.........BO7........-- ...........BO5
Now I want to compare column 1&2, 1&3 and put these values in new columns after column 3 for Type1 & Type2
Does anyone has any idea on this?
Thanks,

1. Right click your table
2. Select Calculations -> Count
3. It will insert a new column. Edit this new column formula and substitute it with thos other formula:
=If ( <Name> Where (<ID>=1) = <Name> Where (<ID>=2) ) Then "Column 1 equal to column 2" Else "They're not Equal"
4.Put this title in that column's header:
Column 1 vs Column 2
5. Repeat steps for comparison between 1 and 3, just that this is the formula you have to use:
=If ( <Name> Where (<ID>=1) = <Name> Where (<ID>=3) ) Then "Column 2 equal to column 3" Else "They're not Equal"
Note: Apply necessary changes depending on what you need.
Edited by: PadawanGirl on Jul 4, 2011 10:32 PM

How to compare 2 columns with data like...

Hi,
I have to compare 2 columns from 2 different tables the columns contain data like
SELECT CIRCLE FROM RATE_PLAN
OUTPUT
(AP,NAT)
(AS,NAT)
(BH,NAT).
SELECT CIRCLE FROM subscriber_info
(AP,NAT)
(AS,NAT)
(BH,NAT)
but when i put a join on the tables on this column i get the ouput as -0 rows returned
select col1,col2 from rate_plan,subscriber_info
where
rate_plan.CIRCLE=subscriber_info.CIRCLE
HOW DO I COMPARE THE 2 COLUMNS SO THAT I GET MATCHING RECORDS??
NOTE:-DATATYPE OF BOTH THE COLUMNS IS SAME.

Hi,
using SQL*Plus can you cut and paste the result of following commands :set tab off
set trimout on
set trimspool on
desc rate_plan;
SELECT '-'||CIRCLE||'-' c FROM RATE_PLAN ;
desc subscriber_info;
SELECT '-'||CIRCLE||'-' c FROM subscriber_info ;And be sure to use the tags {noformat}{noformat} before and after the pasted output.

How to compare all columns in a SELECT with all columns in a Cursor ?

Hi All,
I would like to know if something like this is possible in PL/SQL
I have a cursor CUR1 which is a SELECT * FROM T1.
And in my loop for every record found in CUR1 I am trying to retrieve its consecutive record in the table T2. Unfortunately T1 and T2 do not have a primary key so there are duplicates. But if I can compare each column of CUR1 with its respective column in T2, I can find the record. But the question is how ?
So I tried something like this, but of course this is wrong, but hope this would give you an idea of what I trying
VAR_T2 T2%ROWTYPE;
CUR_T1 IS SELECT * FROM T1
LOOP CUR_TI
SELECT * INTO VAR_T2
FROM T2 WHERE
‘ALL COLUMNS OF T2’ = ALL COLUMNS OF CUR1;
So is there a easy way to accomplish this. Thank you, AJ

As Walter says, this is simply an intersect if you are comparing all the columns.
However, if you really must do it in a slow by slow, PL/SQL loop (no real valid reason why you would though)...
DECLARE
VAR_T2 T2%ROWTYPE;
CUR_T1 IS
    SELECT * FROM T1;
BEGIN
FOR i IN CUR_TI
LOOP
    SELECT * INTO VAR_T2
    FROM T2
    WHERE T2.col1 = i.col1
      AND T2.col2 = i.col2
      AND T2.col3 = i.col3
      AND T2.colN = i.colN;
END LOOP;
END;There is no simple mechanism for just saying "compare all the columns", you will have to specify each one individually in the WHERE clause.

How to sum different column in the same table

Hi everyone
I would like to know how can I make the sum of different column in the same table using apex
exple:
TR_PROJ_BIL_TRIM.ENTPIDFISC as ENTPIDFISC,
    TR_PROJ_BIL_TRIM.EXEANNEE as EXEANNEE,
    TR_PROJ_BIL_TRIM.PROJBILTRIMT1PREV as PROJBILTRIMT1PREV,
    TR_PROJ_BIL_TRIM.PROJBILTRIMT2PREV as PROJBILTRIMT2PREV,
    trunc( TR_PROJ_BIL_TRIM.PROJBILTRIMT1PREV)+(TR_PROJ_BIL_TRIM.PROJBILTRIMT2PREV)
from TR_PROJ_BIL_TRIM TR_PROJ_BIL_TRIM
group by TR_PROJ_BIL_TRIM.ENTPIDFISC,TR_PROJ_BIL_TRIM.EXEANNEE
but while trying to run this script i get this error message:"ORA-00979: not a GROUP BY expression"
thanks for reading me and I hope to hear from you soon

Hi,
Your question do not have anything do with APEX.
It is pure SQL question and you will get better answer this kind questions from SQL and PL/SQL forum
You need have GROUP BY when you use aggregate functions like SUM.
I assume you like just add two columns.
Try
SELECT ENTPIDFISC
    ,EXEANNEE
    ,PROJBILTRIMT1PREV
    ,PROJBILTRIMT2PREV
    ,trunc(PROJBILTRIMT1PREV) + (PROJBILTRIMT2PREV)
FROM TR_PROJ_BIL_TRIM
Regards,
Jari

How to add different columns in a single dashboard prompt?

Hi
I am new to this forum. I got a new requirement, my client is asking me to show multiple columns with multiple tables in a single dashboard prompt
for Ex: Column name Table name
1. Customer 1. Customer Details
2. Market 2. Region
3. Order 3. Order Status
4. Product 4. Product Type
He wants to show all these column names in a single prompt when user click on the particular column name it should appear on report. Is it Possible? if possible tell me how?

See this thread...
Re: How to add new columns by using Multiselect

How I compare the columns of 2 tables

Hi, what's the query I use to compare all the columns of 2 tables, or how I use the result of COLUMN_NAME in the DBA_TAB_COLS?
Tnks for helping...
Mnk

I have this select:
SELECT D.COLUMN_NAME AS CFINAL
FROM DBA_TAB_COLS D,
(SELECT A.COLUMN_NAME AS C1
FROM DBA_TAB_COLS A
WHERE (A.OWNER LIKE '%TEL_USJ07%' AND
A.TABLE_NAME = 'BOLETOS')) F
WHERE D.COLUMN_NAME = F.C1
AND D.OWNER LIKE '%TEL_USJ07%'
This will return the column's name where tabel_name LIKE BOLETOS.
I want use this result in another select where the table have this columns and more, but I want to see all the results in the second table where the columns came from the first select.
For example: the first select bring to me the columns: cod_tipo_bol and cod_tipo_corte, I want to see in the second select only the results of this 2 columns.
THIS IS THE COLUMNS OF THE SECOND TABLE I WANT TO USE:
cod_tipo_bol
cod_frente_corte
num_carga
cod_caminhao
cod_motorista
lib_numero
cod_enc_frente
cod_div2
cod_div3
cod_div4
bol_data
cod_carregadora1
cod_oper_carreg1
cod_carregadora2
cod_oper_carreg2
cod_colhedora1
cod_oper_colhed1
cod_colhedora2
cod_oper_colhed2
cod_colhedora3
cod_oper_colhed3
cod_trat_reb
cod_oper_trat_reb
cod_trat_transb1
cod_oper_transb1
cod_trat_transb2
cod_oper_transb2
cod_trat_transb3
cod_oper_transb3
cod_julieta_sm_reboque
bol_status
--------

How to compare two columns and provide a report

hi guys any idea on this one i have a table in apex
which looks like this                                                Create table Assessments ( USER_ID varchar(40) , Assessed number ) ;
                                                                                     CREATE OR REPLACE TRIGGER "TABLE_IMP_T1"
                                                                                      BEFORE
                                                                                      insert on "TABLE_IMP"
                                                                                     for each row
                                                                                     begin
                                                                                     :NEW.USER_ID := nvl(v('APP_USER'),USER);
                                                                                     :NEW.ASSESSED := ('1');
                                                                                     end;
The data in this table looks like after some inserts                        USER_ID                  ASSESSED
                                                                                                                      user1@mail                      1
                                                                                                                      user2@mail                       1
                                                                                                                      user3@mail                       2
                                                                                                                      user4@mail                       7
Then i have another table that has fixed values in it which is called    Assessments_complete the data in this table looks like                 USER_ID             Assessments_2do
                                                                                                                                                                                                                                                   user1@mail                       1
                                                                                                                                                                                                                                                    user2@mail                      1
                                                                                                                                                                                                                                                    user3@mail                      3
                                                                                                                                                                                                                                                    user4@mail                     10
What id like to do is create a report in apex that compares the to tables and would have columns in the report to shows the USER_ID , ASSESSED , Completed   so it would look something like
USER_ID                      ASSESSSED                    COMPLETE
USER1@MAIL               1                                         yes
USER2@MAIL               1                                         yes
USER3@MAIL               2                                         no
USER4@MAIL               7                                         no
So why it shows no for user3@mail and user4@mail is because there Assessments 2do is not he same as Assessed
Any ideas guys

SCW,
I'm sure there is a clever way to cascade functions to avoid adding an auxiliary column in your practice table, but to me it wouldn't be worth the aggravation. I would add a column that concatenates Columns A & B, AWG & mils. This column can be anywhere and would be Hidden. Let's say your new column is Column N.
In Column N, fill the body rows with:
=A&"-"&B
As good Numbers programming form would indicate, let's name the Practice Table Practices and only put the practices in that table. In another table where you do the lookup, let's call it Program, we will have the calculation/lookup.
Based on your example, I'd guess that AWG may be in Column D and mils in Column E of your Program table, and the Soak lookup in Column F. If I'm wrong, adjust the column id.
In Column F, write:
=OFFSET(Practices::I$1,MATCH(D&"-"&E, Practices::N,0)−1, 0)
The hyphen in the concatenated representation of the combination of AWG and mils is just tp make it more readable.
As I'm sure you know, you could use other approaches, but since I had you put your aux column at the end of your Practices table, OFFSET with MATCH is a clean approach. INDEX could be used too.
Here's an illustration:
Regards,
Jerry

How to compare two column between two datasets in report Builder

Hello all,
I have a developed a report which contains two data sets as shown below
Now i have to match the value of proj_id and ProjectTicketId from
ds_New to project_id and ProjectTicketId in ds_Previous
and get the respective "Client" from ds_Previous.
How can i get the following data in Report builder 3.0
Thanks in advance.
Pankaj Kumar Yadav-

Is that possible to match them via T-SQL, to get one data set?
SELECT
Client from New JIOIN Previous
ON
New.proj_id=Previous.proj_id
AND New.ProjectTicketId =Previous.ProjectTicketId
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Blog:
Large scale of database and data cleansing
MS SQL Consultants:
Improves MS SQL Database Performance

Tableview - column color disaply based on comparing other column on the tab

Hi,
Can any one give me some idea about how to compare two columns of table on IF_HTMLB_TABLEVIEW_ITERATORRENDER_CELL_START ?. I have to compare the column 3 with column 4 and display the color on column 3. I am trying to do that on IF_HTMLB_TABLEVIEW_ITERATORRENDER_CELL_START but this is not working out. Any suggestion ?.

Hi,
in IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START you only have the actual row in P_ROW_DATA_REF.
Either you make the the availabe as iterator's attribute when instantiating or you collect the row P_ROW_DATA_REF when in RENDER_CELL_START to a class attribute.
Regards,
Sebastian

How to check which column data differs from master table and archive table

Hi All,
i have two tables, table a (a1 number,a2 varchar2,a3 varchar2) and table b (b1 number,b2 varchar2,b3 varchar2).
how to check the data in both the table are same( including all columns).
data in a.a1 is same as b.b1 and a.a2 is same as b.b2 like that.
if they not same , i need to know which field differs.
Kindly Share ur ideas.

887268 wrote:
thanks Sven W. ,
above reply clearly shows what my question is.
one column must be primary key, based on that key i need to find out which are the fields having different data..
im strugling with this, i tried the following already, but not able to get.
select the columns from a MINUS select the columns from b.
-- from this i can find whether the difference occurred or not.
but i cant able to get which are the fields value changed.Good. Then you would match the rows using the PK column and need to compare the columns
Instead of a MINUS + UNION ALL + MINUS we can now use a FULL OUTER JOIN
It is a little task to write out all column names, but 40 columns can be handled.
This statement would show you both tables with matching rows on the same line.
select a.*, b.*
from a
FULL OUTER JOIN b on a.id = b.idNow filter/check for mismatches
select case when a.col1 != b.col1 then 'COL1 value changed'
                when a.col2 != b.col2 then 'COL2 value changed'
                when a.col3 != b.col3 then 'COL3 value changed'
         end as compare_result
        ,a.*, b.*
from a
FULL OUTER JOIN b on a.id = b.id
/* return only non matching columns */
where (a.col1,a.col2,a.col3) != (b.col1,b.col2,b.col3) You might need to add nvls to take care of null values. Test this!
Another way could be to group upon the primary key
select *
from (
select id
           ,count(distinct col1)-1 cnt_col1
           ,count(distinct col2)-1 cnt_col2
           ,count(distinct col3)-1 cnt_col3
   from
     select 'A' source, a.*
     from a
     UNION ALL
     select 'B' source, b.*
     from b)
   group by ID
/* only records with differences */
where 1 in (cnt_col1, cnt_col2, cnt_col3)
;The count columns will hold either 1 or 0. If it is 1 then this column has a difference.

Need query to compare the columns of 2 diff tables of 2 different schemas.

There are two different tables(sample1, sample2) in different schemas(s_schema1, s_schema2).
I want the query to compare the columns of two different tables of two different schemas and provide whether the data as well as the count of data in
the column are same .
if not provide the data which is not similar in the columns of two different table.
NOTE:
I need queries for both the cases.
(i) The datatypes in columns of two different tables are same.
(ii) The datatypes in columns of two different tables are diffrent.

Welcome to the forum!
Whenever you post provide your 4 digit Oracle version.
>
I need queries for both the cases.
>
Great - write the queries!
The forum is not a coding service where you ask people to write code for you for free.
YOU need to write the code. Then if you have a problem with the code you have written post the code you have written (using \ tags) and explain the problem you are having.
Read the FAQ about how to ask a question on the forums.

How can I make my query to compare only columns of two tables... not the storage information?

11GR2
=-----------------------------------
I am using below querry to compare two table that has same name, under two different users... But after making storage information false like below and if the storage information is different on column level than it create "Alter modify " statements for the column ... How can I make my query to compare only columns of two tables... not the storage information?
begin
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'PRETTY', TRUE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SQLTERMINATOR',TRUE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'SEGMENT_ATTRIBUTES', FALSE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'STORAGE', FALSE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'TABLESPACE',FALSE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'CONSTRAINTS',FALSE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'REF_CONSTRAINTS',FALSE);
DBMS_METADATA.SET_TRANSFORM_PARAM(DBMS_METADATA.SESSION_TRANSFORM,'CONSTRAINTS_AS_ALTER',FALSE);
End;
select REGEXP_REPLACE(dbms_metadata_diff.compare_alter('TABLE','TABLE_NAME_A','TABLE_NAME_A','USER1','USER2'),('USER1...'),'', 1, 0, 'i') from dual

I am using below querry to compare two table that has same name, under two different users... But after making storage information false like below and if the storage information is different on column level than it create "Alter modify " statements for the column ... How can I make my query to compare only columns of two tables... not the storage information?
If you want help you have to SHOW us what you are doing and how you are doing it; you can't just try to tell us in your own words.
We can't see your computer screen.

How to compare two rows from two table with different data

how to compare two rows from two table with different data
e.g.
Table 1
ID   DESC
1     aaa
2     bbb
3     ccc
Table 2
ID   DESC
1     aaa
2     xxx
3     ccc
Result
2

Create
table tab1(ID
int ,DE char(10))
Create
table tab2(ID
int ,DE char(10))
Insert
into tab1 Values
(1,'aaa')
Insert
into tab1 Values
(2,'bbb')
Insert
into tab1 Values(3,'ccc')
Insert
into tab1 Values(4,'dfe')
Insert
into tab2 Values
(1,'aaa')
Insert
into tab2 Values
(2,'xx')
Insert
into tab2 Values(3,'ccc')
Insert
into tab2 Values(6,'wdr')
SELECT
tab1.ID,tab2.ID
As T2 from tab1
FULL
join tab2 on tab1.ID
= tab2.ID
WHERE
BINARY_CHECKSUM(tab1.ID,tab1.DE)
<> BINARY_CHECKSUM(tab2.ID,tab2.DE)
OR tab1.ID
IS NULL
OR
tab2.ID IS
NULL
ID column considered as a primary Key
Apart from different record,Above query populate missing record in both tables.
Result Set
ID ID
2 2
4 NULL
NULL 6
ganeshk

Compare 2 Columns using SSIS from two different tables

Hello,
A newbie to ssis.
I have a Table 1 with Address Details and Table 2 with Address Details of same customer but from different sources. I have loaded these two data sources and also joined these two tables.
I want to compare address column of one table with the other table, if they are not equal need to insert into another table.
With Sql query we can perform it, but just want to know how to perform this with ssis.

You can use the
LookUp Transformation
Arthur
MyBlog
Twitter

How To UPLOAD a DATA (.DAT) fiel from PC to internal table and then split it into the data different columns

Hi all,
I am new to ABAP Development. I need to upload a .DAT file (the file doesn#t have any proper structure-- Please find the .DAT file in the attachment). After uploading the DATA (.DAT) fiel I need to split in into different columns. Refering the attached .DAT fiel the fields in bracets like:
[Arbeitstag], [Pecunia], [Mita], [Kunde], [Auftrag] and [Position] are different fields that need to be arranged in columns in an internal table. this .DAT fiel which I want to upload and then SPLIT it into various fields will will treated as MASTER DATA table for further programming. The program that I had written is as below. Also please refer the attached .DAT table.
Please if any one could help me. i searched a lot in different forums but couldn't find me a solution. Also note that the attached fiel is in text (.txt) format here but in real situation the same fiel is in DATA (.DAT) format.
*& Report ZDEMO_ZEITERFASSUNG9
REPORT ZDEMO_ZEITERFASSUNG9.
Types: Begin of ttab,
        Rec(1000) type c,
       End of ttab.
DATA: itab type table of ttab.
DATA: wa_tab type ttab.
DATA: file_str type string.
Parameters: p_file type localfile.
At selection-screen on value-request for p_file.
                                       CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
                                        EXPORTING
*                                          PROGRAM_NAME        = SYST-REPID
*                                          DYNPRO_NUMBER       = SYST-DYNNR
*                                          FIELD_NAME          = ' '
                                           STATIC              = 'X'
*                                          MASK                = ' '
                                         CHANGING
                                           file_name           = p_file.
*                                        EXCEPTIONS
*                                          MASK_TOO_LONG       = 1
*                                          OTHERS              = 2
Start-of-Selection.
file_str = P_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\BUP_ZEIT.DAT'   " This the file source address
      FILETYPE                      = 'DAT'
      HAS_FIELD_SEPARATOR           = ';'
*     HEADER_LENGTH                 = 0
*     READ_BY_LINE                  = 'X'
*     DAT_MODE                      = ' '
*     CODEPAGE                      = ' '
*     IGNORE_CERR                   = ABAP_TRUE
*     REPLACEMENT                   = '#'
*     CHECK_BOM                     = ' '
*     VIRUS_SCAN_PROFILE            =
*     NO_AUTH_CHECK                 = ' '
*   IMPORTING
*     FILELENGTH                    =
*     HEADER                        =
    tables
      data_tab                      = itab
   EXCEPTIONS
     FILE_OPEN_ERROR               = 1
     FILE_READ_ERROR               = 2
     NO_BATCH                      = 3
     GUI_REFUSE_FILETRANSFER       = 4
     INVALID_TYPE                  = 5
     NO_AUTHORITY                  = 6
     UNKNOWN_ERROR                 = 7
     BAD_DATA_FORMAT               = 8
     HEADER_NOT_ALLOWED            = 9
     SEPARATOR_NOT_ALLOWED         = 10
     HEADER_TOO_LONG               = 11
     UNKNOWN_DP_ERROR              = 12
     ACCESS_DENIED                 = 13
     DP_OUT_OF_MEMORY              = 14
     DISK_FULL                     = 15
     DP_TIMEOUT                    = 16
     OTHERS                        = 17
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP at itab into wa_tab.
        WRITE: / wa_tab.
ENDLOOP.
I will be grateful to all you experts for ur inputs
regards
Chandan Singh

For every Auftrag, there are multiple Position entries.
Rest of the blocks don't seems to have any relation.
So you can check this code to see how internal table lt_str is built whose first 3 fields have data contained in Auftrag, and next 3 fields have Position data. The structure is flat, assuming that every Position record is related to preceding Auftrag.
Try out this snippet.
DATA lt_data TYPE TABLE OF string.
DATA lv_data TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = 'C:\temp\test.txt'
CHANGING
    data_tab = lt_data
EXCEPTIONS
    OTHERS   = 19.
CHECK sy-subrc EQ 0.
TYPES:
BEGIN OF ty_str,
a1 TYPE string,
a2 TYPE string,
a3 TYPE string,
p1 TYPE string,
p2 TYPE string,
p3 TYPE string,
END OF ty_str.
DATA: lt_str TYPE TABLE OF ty_str,
      ls_str TYPE ty_str,
      lv_block TYPE string,
      lv_flag TYPE boolean.
LOOP AT lt_data INTO lv_data.
CASE lv_data.
    WHEN '[Version]' OR '[StdSatz]' OR '[Arbeitstag]' OR '[Pecunia]'
         OR '[Mita]' OR '[Kunde]' OR '[Auftrag]' OR '[Position]'.
      lv_block = lv_data.
      lv_flag = abap_false.
    WHEN OTHERS.
      lv_flag = abap_true.
ENDCASE.
CHECK lv_flag EQ abap_true.
CASE lv_block.
    WHEN '[Auftrag]'.
      SPLIT lv_data AT ';' INTO ls_str-a1 ls_str-a2 ls_str-a3.
    WHEN '[Position]'.
      SPLIT lv_data AT ';' INTO ls_str-p1 ls_str-p2 ls_str-p3.
      APPEND ls_str TO lt_str.
ENDCASE.
ENDLOOP.

How to compare 2 different columns

Similar Messages

Maybe you are looking for