How to compare transport requests found in different environments
Hello gurus,
I need to know what are the transport requests found in my development environment but which are not found in my Production environement. In other words, I want to have a list of all transport requests that have not been transported yet to the production .
I intend to select data from E070 for the 2 environments and compare using loops and reads.
I would like to know if there is a function module that does the same job?
thanks in advance.
Parvez
Hi soobhany parvez .,
Please post the report u developed for knowing the status of Transport Requests across systems, i will be helpful for me and others.
Thanks®ards.,
S.Sivakumar
Similar Messages
-
How to create transport request in object transport
How to create transport request in object transport from server to server
thanks in advance
aryahi,
when ever u r creating any object in devlopment and saving it will ask for request.create request and release in se09.
put mail to basis people to transport ,thy will transport using STMS transaction. -
How to create transport request for standard text created using SO10.
Hi,
How to create transport request for standard text created using SO10?
Regards
Ramakrishna LHi,
For the Standard text created in SO10,
please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
Double click on ADRS or ST or what ever your type of text->
Enter your standard text name
Click on transport button->SHIFT+f6-> It will ask you for a transport request.
Best regards,
Siva -
How to compare the contents of two different tables
hello. can somebody give me an idean on how to compare the contents of two different tables in mysql?
example, i have a table named Main List and a table named New List.
The contents of the New List should be compared to the contents of the
Main List, to check if they are equal. I don't have any idea how to manipulate
this data. Hoping for your help. Thanks.it is better to comapre it using java.. try get the resultset first and store that in collections then comapre the two collections
-
How to reverse Transport requests from sand box to development client
Dear all,
I am doing some testing on Sand box, I made some transport requests from development to sandbox, which effected some settings in sandbox.
Now I want to reverse those transport request from sand box to development, unfortunately I didn't make any note of transport requests which I transported from Development to Sandbox.
Please educate me how to reverse transport requests from sand box to development.
your suggestions are highly appreciated
thank you
Venu GopalThere is no reverse, you have to create a new transport with the original settings.
Programs keep track of their versions and are easier to pull a previous version, configuration can be tougher, open all the folders in SE10 to see if you can determine the configuration changes. -
How to compare the programs in two different systems
Hi,
I have two systems say A & B and i have the program say 'Z_TESTPROG'.
How to compare the program in two different systems.
Regards,
VenkatHi,
Check the version in Utilities -> version -> version management in both servers is one option.
Another one is using SE39 transaction.
Regards
Manasa -
How to track Transport request released
hi Experts,
How to track Transport request released from one development system (D01)to another
development (D02).
is there any way we get know .
AmitHi,
From SE09 & SE10 you track the transport requests, and even you can find the transport request details from the following database tables.
E070 Change & Transport System: Header of Requests/Tasks
E070A Change & Transport System: Attributes of a Request
E070CREATE Change & Transport System: Creation Date of Request
E070DEP Change & Transport System: Dependencies of Requests
E071 Change & Transport System: Object Entries of Requests/Tasks
E071C Change & Transport System: Client-Specific Lock Flag
E071E Lang. Transport: Positive List for Generic Object Selection
E071K Change & Transport System: Key Entries of Requests/Tasks
E071KC Change & Transport System: Key Entries of Requests/Tasks
E071KF Change & Transport System: Nametab Info. on (CHAR)Key Fields
E071KFINI Change & Transport System: Nametab Info. on (CHAR)Key Fields
E071K_30 Change & Transport System: Key Entries of Requests/Tasks
E07T Change & Transport System: Short Texts for Requests/Tasks -
How delete the Transport request in Development system
Hi Guys,
I have created one Transport request and released (not moved to other system), now I don't want that request to transport to other systems.
I need to delete the Transport request, could you please suggest how to delete the Transport request.
Please provide the steps to delete the Transport request.
Thanks,
Gourisankar.hi Gaurishanker
check this thread
How to delete transport request if child request was released
hope it helps you.
thanks
Sachin -
How to create transport request of Dynamic Selection view.
Dear Freinds,
I have created a dynamic selections view form Se80 > Editobject>Selection view > Created by adding the required tables pa0002,pa006,pa0009 . But the transport request saved it locally now i want to create a transport request for the dynamic view . Could any please let me know how to create transport request for the Dynamic selection View which has been created or could any please let me know where this dynamic selection gets stored?
regards
divyaHi Kalyan,
In se80> editobjects > selection view .........i have created the selection view . Now i have went into se80 and i dont find the one you have told me . could you please let me know little bit clear where i have to see .
regards
divya. -
How to change transport Request of an Object
Hi all,
I had assigned a transport request for an object (DTP) in transport organizer. Now i need to put this object in a different transport Request number. Is this possible? If so can someone suggest me how to do this?
Thanks
MaddyDelete the DTP.
Add the DTP to the new request - You can do this in SE03 or Transport Connection.
Or
Merge Requests using Context Menu on the Request.
Or
Open the DTP - Extras ( ? ) _ Object Direct Entry - Click on Change - Assign it to a new request. - You have to delete the DTP/Unlock it from the earlier request. -
How to Delete Transport request for Delete client
Hi guys,
We are going for upgrade from 46C to ECC.
we found client XXX does not exists but Transport request for the client XXX does exists. so we plan to delete it or release it before going to upgrade.
But SAP does not allow me to delete or release it. Is there any special way to deal this issue.
Please suggest me.
Thanks
JaichanYou could have the lost client XXX recreated again by system administrator using a "minimal" client copy (just users), should take only minutes and not much disk space.
Then you can release or delete the transports, afterwards delete the client again.
I don't know another way of doing it.
Thomas
P.S. all the other replies so far do not take into account that you cannot change transports that were created in a different client.
P.P.S did you ever look at the long text for message TK056? This clearly explains your options here
To transfer the request to the current client, proceed as follows:
1. Go to the request overview.
2. Position the cursor on the request and choose Request/task -> Display/change.
You are asked if you want to copy the request and all tasks belonging to it to the current client.
3. Answer "Yes".
The request is copied to the current client, and can then be edited as normal.
Note
For this procedure, you require the "Change source client" authorization contained in the SAP standard authorization S_CTS_TR_ALL.
You can copy only your own requests to another client.
In order to copy other users' requests, you first have to assign them to you.
You can reassign the request to you in another client only if the original client no longer exists (prerequisite: You want all client-specific entries to be deleted).
I was not aware of this up to right now... -
How to create Transport request in R/3(ECC6)
Hi all,
Can somebody tell me how to create the transport request in ECC6.0
Regards
Kiran KumarKiran,
From RSA5 --> Choose datasource and select "Activate Datasource" --> system prompts for transport request. Do not save as local object. assign package and assign to transport request.
From RSA6 --> Select datasouce --> choose transport(truck icon) --> follow same as above
From LBWE --> if you do any changes or customization system prompt for transport request.
Hope it Helps
Srini -
How to release transport request
Hi,
Good Morning!!!!!!!!!!!!!!!
How to realease the transport request?,in that one rquest is header in that one one more task number is there.
can u help me,this is very urgent,
please send step by step procedure.
very urgent.please
Yours
srilathaHi,
1) first u r collected objects should be in transportable package(not in $TMP)
then u check in SE09 which are the objects u r collected those things are avilable in that request or not if not there once again u should collect before transport and check that request if any locks are there if there release in SE03
2) now in SE09 first u relase the task(subordinated one) then release the request.and u can see that request in imported server in tcode of STMS.
Thnaks & Regards
sathish -
How to assign transport request for Dynamic selection in SE36
Hi Friends,
Please guide me how to transport or assign a request for the changes made in BRF selecion view.
I have assigned and added BKPF-XREF1_HD field for FB03 transaction. Its working fine as per user requirement.
I am facing probelm to assing a transport request for that. I didn't find any transport menu in se36.
So please provide me how to assign a TR which need to import into Production client.
If I have to assign or create a program (standard), then please provide me the program name.
Please reply.
Thanks & Regards
Sankar.
Edited by: sankar babu on Jul 29, 2010 12:27 PMModerator message - Cross post locked
Total Questions: 283 (131 unresolved)
Please also close your old posts and assign po1nts to helpful answers.
Rob
Edited by: Rob Burbank on Jul 29, 2010 9:50 AM -
How to compare two Universes of two different Datamarts?
Post Author: Shrikant
CA Forum: Integrated Solutions
Hi.. all I want to compare two universes of different data mart to check the table structure. Can anybody please tell me how to compare two Universes of different Datamarts?How i can achive this usinig BusinessObjects Enterprise XI Release 2 ??
Thanks in advance./*does record 1 have friend*/
WITH t AS
(SELECT 1 AS Id, 'a' AS NAME, 'type1' AS Col
FROM Dual
UNION ALL
SELECT 2 AS Id, 'a' AS NAME, 'type1' AS Col
FROM Dual
UNION ALL
SELECT 3 AS Id, 'a' AS NAME, 'type2' AS Col FROM Dual)
SELECT count(*) as YesNo
FROM t T1
WHERE T1.Id = 1
AND (T1.Name, T1.Col) IN (SELECT T2.Name, T2.Col FROM T t2 where t2.ID != T1.Id);
1
/*does record 3 have friend*/
WITH t AS
(SELECT 1 AS Id, 'a' AS NAME, 'type1' AS Col
FROM Dual
UNION ALL
SELECT 2 AS Id, 'a' AS NAME, 'type1' AS Col
FROM Dual
UNION ALL
SELECT 3 AS Id, 'a' AS NAME, 'type2' AS Col FROM Dual)
SELECT count(*) as YesNo
FROM t T1
WHERE T1.Id = 3
AND (T1.Name, T1.Col) IN (SELECT T2.Name, T2.Col FROM T t2 where t2.ID != T1.Id);
0
*/
Maybe you are looking for
-
i recently updated my iphone 4s to ios7, and it has now deleted 400 of my contacts not impressed. theres no way i can get them back now this is the last updated i will be doing through apple, and probably the last apple product i will ever own lol.
-
Please help me find a thermal printer for my mother!
My mother is inviting me into her "makeup" business and I am going to be the label designer. We need a printer capable of professionally designing thermal lablels on 1" circular dots. Please if you can suggest something that Best Buy might carry, we
-
Can a folder be password protected
Is there a way to lock individual folders on an iPad?
-
How to update equipment ship to party and sold party data
Hi all, How to update equipment ship to party and sold party data? Is there any BAPI or FM?
-
Hi Good People I have A form With 2 Tab Controls, tabcontrol (1) at the top of the screen, tabcontrol (2) at the bottom of the screen. On Tab Control (1), I have a tabPage1 etc... And when I click on TabPage1, I would like to open a tabPage on the Ta