How to Delete Transport request for Delete client
Hi guys,
We are going for upgrade from 46C to ECC.
we found client XXX does not exists but Transport request for the client XXX does exists. so we plan to delete it or release it before going to upgrade.
But SAP does not allow me to delete or release it. Is there any special way to deal this issue.
Please suggest me.
Thanks
Jaichan
You could have the lost client XXX recreated again by system administrator using a "minimal" client copy (just users), should take only minutes and not much disk space.
Then you can release or delete the transports, afterwards delete the client again.
I don't know another way of doing it.
Thomas
P.S. all the other replies so far do not take into account that you cannot change transports that were created in a different client.
P.P.S did you ever look at the long text for message TK056? This clearly explains your options here
To transfer the request to the current client, proceed as follows:
1. Go to the request overview.
2. Position the cursor on the request and choose Request/task -> Display/change.
You are asked if you want to copy the request and all tasks belonging to it to the current client.
3. Answer "Yes".
The request is copied to the current client, and can then be edited as normal.
Note
For this procedure, you require the "Change source client" authorization contained in the SAP standard authorization S_CTS_TR_ALL.
You can copy only your own requests to another client.
In order to copy other users' requests, you first have to assign them to you.
You can reassign the request to you in another client only if the original client no longer exists (prerequisite: You want all client-specific entries to be deleted).
I was not aware of this up to right now...
Similar Messages
-
Prevent import of transport request for certain client
Hello.
I have two clients in TST system.
I would like to delete one client.
How can I prevent import of transport request for certain client?
At hte same time users must transport request into other client in TST system.
Is it possible?
I know next features:
1.
se37-->
SCCR_LOCK_CLIENT
SCCR_UNLOCK_CLIENT
2.
tp locksys SID (from OS level)
but they use for all client (for whole system).
Best regards,
Denisse37-->
SCCR_LOCK_CLIENT
SCCR_UNLOCK_CLIENT
These are Client Specific not Cross client. So if you want to delete a client just Schedule the Delete Job and lock the client and no body would be able to transport on that client. I hope i understand your question properly.
Regards,
Subhash -
How to create transport request for standard text created using SO10.
Hi,
How to create transport request for standard text created using SO10?
Regards
Ramakrishna LHi,
For the Standard text created in SO10,
please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
Double click on ADRS or ST or what ever your type of text->
Enter your standard text name
Click on transport button->SHIFT+f6-> It will ask you for a transport request.
Best regards,
Siva -
How to assign transport request for Dynamic selection in SE36
Hi Friends,
Please guide me how to transport or assign a request for the changes made in BRF selecion view.
I have assigned and added BKPF-XREF1_HD field for FB03 transaction. Its working fine as per user requirement.
I am facing probelm to assing a transport request for that. I didn't find any transport menu in se36.
So please provide me how to assign a TR which need to import into Production client.
If I have to assign or create a program (standard), then please provide me the program name.
Please reply.
Thanks & Regards
Sankar.
Edited by: sankar babu on Jul 29, 2010 12:27 PMModerator message - Cross post locked
Total Questions: 283 (131 unresolved)
Please also close your old posts and assign po1nts to helpful answers.
Rob
Edited by: Rob Burbank on Jul 29, 2010 9:50 AM -
How to create Transport request for OKC9
Hi Experts,
I changed the Prerequisite for one of the substitution in Development client.
No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request. Please help me out how to create the Transport Request for the same.
Regards
VijayCheck whether t he Request is being generated or not
if yes
go to SE10
display the tranport request
Release the Cusotmising Task first
later relase the Request
and later Check whetehr the Request is passed in Qiality form Development thru t code STMS
Check with ur basis consultant once -
How to create Transport request for OKC9 changes
Hi Experts,
I changed the Prerequisite for one of the substitution in Development client.
No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request. Please help me out how to create the Transport Request for the same.
Regards
VijayHI,
In the same screen, go to Menu bar>Table view. Transport.
This will help you to create Transport request and u can move the same to Production.
Vijay -
How to create transport request for standard web template
hi all
can any one tell me the step by step procedure to create transport request for standard template?
thanks
shaliniBusiness Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
Message was edited by:
Jerome -
Can we create Transport request for deleting a package?
Hi all,
We have few customised programs and tables developed in a package. Normally we create a transport request, include the objects for this package, then generate the FTP files and send it to user. Now the user wants us to create a FTP files for deletiing the package. Can this be possible without effecting the package in our system?( For this we have only dev sys)
Thanks and Regards,
Sravanthi>
sravanthi konda wrote:
> Yes, I too cannot understand. If it is to delete a single program or 2 programs it is posible to create a TR excluding that program, but I don't understand how to delete whole package. Is there any possibility to do this?
You have to ask the user to delete the package locally. Moreover please educate him about the CTS mechanism in SAP, i don't think ABAPers are here to hack the SAP system -
How to create a deletion transport request without deleting the object.
Hi Experts,
I got a very strange requirement in which i want to delete a object from QA envirement. One way to delete it is delete the object in developement and save it in a transport request. And transport that request to QA.
But can't delete the object from Dev environment. So is there any other way by which i can do this.
Thanks
Yogesh GuptaHi,
You need not worry about deleting the objects in QA now.
Have the set of objects which you will not be tranporting to PROD.
After your project is live and during support before handholding to the customer, clean your system DEV,QUA.
Reward Points if Useful.
Thanks,
Anita -
How to Create Transport Request For custom table
Hello All,
I have and requirement to create transport request automatically when and record inserted in to the custom table.
Actually FI whe people create or delete some bank account from DEV client the transport request creates automatically and they transport that request to Quality and Production system to delete or create that account from all the systems. but when they delete the account all the informations related to that bank accounts get deleted from all the standered customize tables . to keep the track of that deleted account I have created one z table which is of type customize table. this table is filled automatically when any account get deleted from DEV system. now I want to pass that record to Quality and Production systems using transport request.
how can i create transport request when record get inserted into my ztable automatically.
Thanks in advance.
VinodHello All,
This is a FAQ and has been answered many times before in the forum.
1. Maintain delivery class 'C' it will start asking for a TR: False. Delivery class has got nothing to do with the TR prompt. It determines how the data is to be transported. A delivery class 'C' will prompt for a customizing request, whereas a delivery 'A' will prompt for a workbench request.
2. For the system to automatically prompt for a TR you have to select the "Standard Recording Routine" in the table maintenance generator. This will prompt you for a TR every time you try to create / modify a record & save it to the DB.
Hope i am clear in my explanation.
If your table is filled automatically through some coding you have to add the entry to the TR programmatically. Check this link for details: [http://wiki.sdn.sap.com/wiki/display/ABAP/TransportingTableEntriesinABAPprogrammatically|http://wiki.sdn.sap.com/wiki/display/ABAP/TransportingTableEntriesinABAPprogrammatically]
BR,
Suhas
Edited by: Suhas Saha on Mar 31, 2010 11:22 AM -
How to create transport request for business function activation?
Hi Gurús,
I activated LOG_MM_MAA_1 business function in development (DEV) system:
Component: SAP_APPL
Release: 604
Level: 0006
SP: SAPKH60406
I want to transport the activation to quality (QAS) system.
In SFW5 transaction --> System Settings --> Transport only generated a workbench transport request with "Status Tables Switch Framework Client-Independent" (Object type = SF02, Object = A)
Is this the only object to transport?
Is the activation of business function should be direct in QAS system?
Thank in advance
Alonso Valenzuela> In SFW5 transaction --> System Settings --> Transport only generated a workbench transport request with "Status Tables Switch Framework Client-Independent" (Object type = SF02, Object = A)
> Is this the only object to transport?
Yes.
The "after import" method during the transport will activate the BF as it did in the original system.
> Is the activation of business function should be direct in QAS system?
No, transport it.
Markus -
How to use transport request to delete table entries on target system
I released a request from DEV system to QA system , the request(request 1) delivered some table content,
but some of contents are incorrect, is that possible to release another request(request 2) to QA system,in
the request 2, I can specify which records needs to be deleted, so when request 2 is imported into QA
system, all the incorrect records are deleted?
Is there any API for me to create such a request 2?
The problem is we delivered some redundant table enties when project released to customer,
we want to delete these redundant records in support package, when customer installed support
package, all the redundant records are deleted, so no manual actions are needed on customer side.
thanks very much.Hi
It should be as simple as deleting your entries, saving as a transport and then sending the transport to the client and this should override what is there
Frenchy -
Issues with creating transport request for cross client changes???
Hi,
In our ECC 6.0 dev system, functional team makes all their configurations in client 100.But ABAP team is using another client 120 to create /modify ABAP objects.
So all workbench requests getting created in client 120.
I would like to have all customizing/work bench requests created and released from client 100.Is is possible to re-assign all work bench requests created in cleint 120 to client 100?
Thanks
Ram
Message was edited by:
rama subramaniamHi Rama,
If u r making any workbench changes that means they are repository
objects it will reflect entire system. I dont think we need to import them
into the same system once again. Hw ever we can do that by scc1.
Regards,
Vamshi. -
How to create transport request of Dynamic Selection view.
Dear Freinds,
I have created a dynamic selections view form Se80 > Editobject>Selection view > Created by adding the required tables pa0002,pa006,pa0009 . But the transport request saved it locally now i want to create a transport request for the dynamic view . Could any please let me know how to create transport request for the Dynamic selection View which has been created or could any please let me know where this dynamic selection gets stored?
regards
divyaHi Kalyan,
In se80> editobjects > selection view .........i have created the selection view . Now i have went into se80 and i dont find the one you have told me . could you please let me know little bit clear where i have to see .
regards
divya. -
How could we delete transport request and task(the released one)
Hello
We have a released transport task(not request). Transport request is not released.
How could we delete transport request and task(the released one). Namely we would not like to transport it to productionHi, never delete directly in table.
There are more tables which depends each other...
Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
Using program: RDDIT076 and changing status.
Maybe you are looking for
-
Validation \ User-exit \ BADI \ BTE for F-43 for missing exchange rate
Hi, I maintain the exchange rate on a daily basis in TCURR exchange rate table. But, let's say that, by accident, in one day I fail to input the exchange rate. In this case, when I input a invoice in F-43, I'd like for the system to issue a warning (
-
I can't get mi ipod to play music on my speaker/dock
Hi all I have an ipod touch and I have a speaker/dock and I can't get the ipod to play music on the speakers it's hooked up, the dock recognises the ipod, I have home sharing on and this is the second speaker/dock I have tried. HELP
-
Resource Depends status is Waiting
i have problem about depends resource, i have Resource object A, B, C, D ,E. Resource object B,C,D,E depends on Resource A. after Resource Object A Provisioned , it should Resource B,C,D,E running. why it just resource B,C running (Provisioned ) and
-
Why does my audio jump all over the place after detaching it
in iMovie HD you could extract audio then work with clips over it, in 09 I can't do anything. I extract/or detach the audio, but it is still attached or something. if you put a clip in the project widow the whole thing moves over, not just the video.
-
GETFORMATTRIB() not available to form/section triggers
Hello all, I am just wondering why the DAL function - GETFORMATTRIB() returns nothing when used in a form/image trigger. Attribute values are set to all the forms well in advance and why these cannot be made availabe before Gendata() ? Any reason? Th