How to compile and install driver?

Hey there,
I've got the source for a driver, but how do I compile and install it?
Thanks.

If you need more info check out this wiki:  http://wiki.archlinux.org/index.php/ABS … ild_System
You don't have to build an arch package if you don't want but you will get more details here.

Similar Messages

  • How to compile and install glib and gtk+?

    Hi,
    I am trying to "configure", a "make", and "sudo make install" on the package glib-2.26.0.
    I type ./configure which works fine but then when I type 'make' it gets to a certain point and then gives the following error message:
    *#error GNU libiconv not in use but included iconv.h is from libiconv*
    What does this mean? I've already installed iconv under /usr/bin so what exactly is going on here?
    Thanks in advance,
    Mark
    PS: I originally had Leopard on my machine, and now I have Snow Leopard; does that mean that I have to rebuild every package from scratch?? Could this be causing the problem?

    Actually this is not necessarily the wrong place to ask such a question (or was it moved to the unix forum? My head hurts). In my experience, gtk+2 and the associated software is not completely trivial to compile on OS X and to get working properly. I make fairly heavy daily use of it. I let fink do this for me.
    One immediate suggestion: Try not to put this stuff in /usr/bin. If you can put it in /usr/local, or using fink, put it in /sw, or macports (a fink alternative some prefer), in /opt/local, it has the advantage of (a) not clobbering anything distributed with OS X, and (b) won't get clobbered by OS X updates.
    I maintain precompiled versions of gtk+2 and all that other stuff, informally, to be installed via fink if you are interested.
    If so, start here: My pre-compiled packages
    Use the 64-bit version if you are able to.

  • How to compile and install kaffe-1.0.6 on arm-linux??

    hi,all:
    Does anyone know the answer to my question?If you
    do,could you tell me the answer? Places where to find
    the answer is also wanted.
    Thank you ,all guys.
    hugh

    If you are cross-compiling kaffe then you can use this:
    CC=arm-linux-gnu-gcc \
    AR=arm-linux-gnu-ar \
    LD=arm-linux-gnu-ld \
    NM=arm-linux-gnu-nm \
    RANLIB=arm-linux-gnu-ranlib \
    KAFFEH=/home/fire/kaffeh \
    CFLAGS=-Os LDFLAGS=-s \
    ./configure \
    --host=arm-linux-gnu \
    --enable-shared \
    --disable-debug \
    --disable-xprofiling \
    --disable-xdebugging \
    --disable-feedback \
    --without-profiling \
    --without-libffi \
    --without-x \
    --without-stats \
    --disable-gcj \
    --prefix=/usr
    make
    make DESTDIR=~/distro install
    Btw this will not compile kaffe with AWT support.

  • How to compile and publish after modified a .java file?

    Hello,
    I am a newbie to Business Object. I am now working on a server that installed BusinessObjects Enterprise, to develop and run BO reports. I need to edit some java codes of the InfowView. I found that there are some .java, .class, .jar files under the installed folder. I know that it is a struts framework and I can find which .java file to edit, but I don't know how to compile and publish the codes. Is it necessary to install any development tool to do it?
    Regards,
    Philip

    Since you are using CSV, you can read a line at a time and then use String.split() on it. One you have it split, you upload to your DB using JDBC or if your in the MS world and cannot get a JDBC driver, then use the JDBC/ODBC bridge.

  • How to get and install the new MSI Bluetooth Software Package 1.4.3.3.

    How to get and install the new MSI Bluetooth Software Package 1.4.3.3.
    This little FAQ will only cover the new version of MSI Bluetooth Software Package.
    First thing too do is unistall any older version of the MSI Bluetooth Software.
    Do this through the Add/Remove program applet in your control panel.
    There seams too be only through Live update you could get the new version of MSI Bluetooth Software Package.
    If you can't see any enter for MSI Bluetooth Software in the Live driver section of Live update then you have too enter the following too your registry.
    Create following code in Notepad and save it as MSILD.reg, then run the file.
    ;-->Code start
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SOFTWARE\MSI\Drivers\MSI Bluetooth Software]
    "DrvSetup"="1"
    "Version"="1.4.2.10"
    ;-->Code end
    Rerun the Live update and hopefully you will now see a entry for MSI Bluetooth Software in Live driver section.
    Install the new version of MSI Bluetooth Software and reboot your computer. Even if the setup program doesnt told you too doit.
    After rebooting the computer you will see the Bluetooth icon in the taskbar. If it's Red then try too start the Bluetooth services by right click on the try icon and the only alternetiv there is.
    If the Bluetooth services is asking for a valid licens.dat then you should do the following.
    Surf to Jon's Bluetooth guide http://www.jonsguides.com./bluetooth/prepare.html and download the patcher from the link there.
    Unzip the the patcher and then run the BTWPatcher.exe program.
    Now the Bluetooth services will start and you will bee able too configure your own settings for the Bluetooth services.
    If nothing of this work you could try the complete Bluetooth solution at Jon's gudie and install the IBM version of the same program. I havent test this solution and will not do soo.

    I have the MS-6968 device and i want to use driver 1.4.x or 3.0.x. I found the driver 1.4.2.10 but i cannot find any WIDCOMMSecurity code.
    So, can anyone give me a link for BTWPatcher.exe???
    It cannot be found here (Jon's Bluetooth ) anymore.
    Thanks

  • How to compile and run package programs in Java

    Hi,
    I want to know how to compile and run the package programs in Java using -d. instead of creating the package folder manually.
    eg:
    package Test;
    class test1
    public void disp()
    //Any code;
    I want to compile this without creating the folder ' Test ' manually. that is if we use -d with javac the Test folder will be created automatically. I need the format of -d
    could anyone please help me.
    Thanks in Advance ,
    Ambika

    My program Test.java in F:\Tomcat5\webapps\Ambika\WEB-INF\Classes. I compiled in the format below. I got like this. What should I do for this? But yesterday I compiled like this only, It compiled and the folder com\cert\Test.class is created. Today again I compiled the pgm after deleting the already created folder 'com\cert', I got the error like this.
    I've given my pgm and the thing I've got when I compiled it.
    Test.java
    package com.cert;
    public class Test
         public void display()
              System.out.println("Hai");
    F:\Tomcat5\webapps\Ambika\WEB-INF\Classes>javac -d F:\Tomcat5\webapps\Ambika\WEB-INF\Classes\Test.java
    javac: no source files
    Usage: javac <options> <source files>
    where possible options include:
    -g Generate all debugging info
    -g:none Generate no debugging info
    -g:{lines,vars,source} Generate only some debugging info
    -nowarn Generate no warnings
    -verbose Output messages about what the compiler is doing
    -deprecation Output source locations where deprecated APIs are u
    sed
    -classpath <path> Specify where to find user class files
    -cp <path> Specify where to find user class files
    -sourcepath <path> Specify where to find input source files
    -bootclasspath <path> Override location of bootstrap class files
    -extdirs <dirs> Override location of installed extensions
    -endorseddirs <dirs> Override location of endorsed standards path
    -d <directory> Specify where to place generated class files
    -encoding <encoding> Specify character encoding used by source files
    -source <release> Provide source compatibility with specified release
    -target <release> Generate class files for specific VM version
    -version Version information
    -help Print a synopsis of standard options
    -X Print a synopsis of nonstandard options
    -J<flag> Pass <flag> directly to the runtime system
    F:\Tomcat5\webapps\Ambika\WEB-INF\Classes>
    Plz help me.
    thanks in advance
    Ambika

  • Compiling and installing Tux On Ice, need a little help

    I have a desktop system and a netbook that I would like to have hibernating when they aren't being used.  The wiki outlined roughly how to accomplish this with this page:  https://wiki.archlinux.org/index.php/Tuxonice
    I downloaded from the AUR the kernel26-ice 2.6.38-4 to compile and install.  I managed to compile it (I think ... correctly I hope) but every time I try to get it installed with "mkinitcpio -p kernel26-ice.preset" the build fails with these errors:
    [root@blackyunzi ~]# mkinitcpio -p kernel26-ice
    /etc/mkinitcpio.d/kernel26-ice.preset: line 5: /etc/mkinitcpio.d/kernel26-ice.kver: No such file or directory
    ==> Building image from preset: 'default'
    ==> WARNING: No kernel version specified. Skipping image `default'
    ==> Building image from preset: 'fallback'
    ==> WARNING: No kernel version specified. Skipping image `fallback'
    [root@blackyunzi ~]# cd ~heather/aur_builds/kernel26-ice/kernel26-ice/
    I have tried to CD into the build directory just to make sure I was using the correct file but that has not helped.  I've never compiled my own kernel before today and I'm stymied as to what I'm doing wrong.  If it matters, I compiled it as a regular user in the folder where I downloaded it to.  The contents of my build directory:
    [heather@blackyunzi kernel26-ice]$ ls -al kernel26-ice
    total 117308
    drwxr-xr-x 2 heather heather 4096 Jul 27 19:52 .
    drwxr-xr-x 3 heather heather 4096 Jul 27 19:08 ..
    -rw-r--r-- 1 heather heather 236395 Apr 21 05:12 2.6.38.3-sched-bfs-401.patch
    -rw-r--r-- 1 heather heather 125982 May 20 18:27 config
    -rw-r--r-- 1 heather heather 120300 May 20 18:27 config.x86_64
    -rw-r--r-- 1 heather heather 40977284 Jul 27 19:47 kernel26-ice-2.6.38-4-x86_64.pkg.tar.xz
    -rw-r--r-- 1 heather heather 665 Jul 27 19:45 kernel26-ice.install
    -rw-r--r-- 1 heather heather 3111082 Jul 27 20:01 kernel26-ice.preset
    -rw-r--r-- 1 heather heather 74739098 Mar 14 19:40 linux-2.6.38.tar.bz2
    -rw-r--r-- 1 heather heather 186457 Jun 2 19:36 patch-2.6.38.8.bz2
    -rw-r--r-- 1 heather heather 12794 Jun 7 02:14 PKGBUILD
    -rw-r--r-- 1 heather heather 451933 Apr 3 15:36 reiser4-for-2.6.38.patch.bz2
    -rw-r--r-- 1 heather heather 129795 May 4 18:30 tuxonice-3.2-for-2.6.38.patch.bz2
    [heather@blackyunzi kernel26-ice]$
    The makepkg file shows that I only changed one setting, the "-j4" bit:
    # /etc/makepkg.conf
    # SOURCE ACQUISITION
    #-- The download utilities that makepkg should use to acquire sources
    # Format: 'protocol::agent'
    DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
    'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
    'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
    'rsync::/usr/bin/rsync -z %u %o'
    'scp::/usr/bin/scp -C %u %o')
    # Other common tools:
    # /usr/bin/snarf
    # /usr/bin/lftpget -c
    # /usr/bin/curl
    # ARCHITECTURE, COMPILE FLAGS
    CARCH="x86_64"
    CHOST="x86_64-unknown-linux-gnu"
    #-- Exclusive: will only run on x86_64
    # -march (or -mcpu) builds exclusively for an architecture
    # -mtune optimizes for an architecture, but builds for whole processor family
    CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
    CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
    LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
    #-- Make Flags: change this for DistCC/SMP systems
    ## While using the kernel26-ice build CK recommends you ONLY compile this kernel
    ## with the same number as how many cpu's you have.
    ## quoting his example: IE you should ONLY do make -j4 on quad core, -j2 on dual core and so on.
    MAKEFLAGS="-j4"
    # BUILD ENVIRONMENT
    # Defaults: BUILDENV=(fakeroot !distcc color !ccache check)
    # A negated environment option will do the opposite of the comments below.
    #-- fakeroot: Allow building packages as a non-root user
    #-- distcc: Use the Distributed C/C++/ObjC compiler
    #-- color: Colorize output messages
    #-- ccache: Use ccache to cache compilation
    #-- check: Run the check() function if present in the PKGBUILD
    BUILDENV=(fakeroot !distcc color !ccache check)
    #-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
    #-- specify a space-delimited list of hosts running in the DistCC cluster.
    #DISTCC_HOSTS=""
    # GLOBAL PACKAGE OPTIONS
    # These are default values for the options=() settings
    # Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
    # A negated option will do the opposite of the comments below.
    #-- strip: Strip symbols from binaries/libraries
    #-- docs: Save doc directories specified by DOC_DIRS
    #-- libtool: Leave libtool (.la) files in packages
    #-- emptydirs: Leave empty directories in packages
    #-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
    #-- purge: Remove files specified by PURGE_TARGETS
    OPTIONS=(strip docs libtool emptydirs zipman purge)
    #-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
    INTEGRITY_CHECK=(md5)
    #-- Options to be used when stripping binaries. See `man strip' for details.
    STRIP_BINARIES="--strip-all"
    #-- Options to be used when stripping shared libraries. See `man strip' for details.
    STRIP_SHARED="--strip-unneeded"
    #-- Options to be used when stripping static libraries. See `man strip' for details.
    STRIP_STATIC="--strip-debug"
    #-- Manual (man and info) directories to compress (if zipman is specified)
    MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
    #-- Doc directories to remove (if !docs is specified)
    DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
    #-- Files to be removed from all packages (if purge is specified)
    PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
    # PACKAGE OUTPUT
    # Default: put built package and cached source in build directory
    #-- Destination: specify a fixed directory where all packages will be placed
    #PKGDEST=/home/packages
    #-- Source cache: specify a fixed directory where source files will be cached
    #SRCDEST=/home/sources
    #-- Source packages: specify a fixed directory where all src packages will be placed
    #SRCPKGDEST=/home/srcpackages
    #-- Packager: name/email of the person or organization building packages
    #PACKAGER="John Doe <[email protected]>"
    # EXTENSION DEFAULTS
    # WARNING: Do NOT modify these variables unless you know what you are
    # doing.
    PKGEXT='.pkg.tar.xz'
    SRCEXT='.src.tar.gz'
    # vim: set ft=sh ts=2 sw=2 et:
    Mkinitcpio shows, after stripping out the comments:
    MODULES=""
    FILES=""
    HOOKS="base udev autodetect usbinput pata scsi sata lvm2 filesystems consolefont"
    (no compression options)
    Finally, I put the kern26-ice.preset into the /etc/mkinitcpio folder and tried to install it from there but again I met failure.
    Apologies for the length but I'm getting frustrated with this issue.
    Last edited by MoonSwan (2011-07-28 02:40:58)

    MoonSwan wrote:I have a desktop system and a netbook that I would like to have hibernating when they aren't being used.  The wiki outlined roughly how to accomplish this with this page:  https://wiki.archlinux.org/index.php/Tuxonice
    I downloaded from the AUR the kernel26-ice 2.6.38-4 to compile and install.
    Hm... netbook.
    If you don't mind trying bfs and bfq too, then you could give the pf-kernel that is mentioned in the wiki too a try:
    http://aur.archlinux.org/packages.php?ID=50956
    It has a repository here:
    [pfkernel]
    Server = http://dl.dropbox.com/u/11734958/$arch
    and a thread: https://bbs.archlinux.org/viewtopic.php?id=103462
    I'm not quite sure how netbook performance is affected by BFS...
    It has the bonus to already be based on 3.0.
    Last edited by Cdh (2011-07-28 20:35:50)

  • How to download and install webutil in FORMS 10G 10.1.2.0.2

    Where i find all the step to
    how to download and install webutil in FORMS 10G 10.1.2.0.2
    i DON'T FIND NOTHING OF VERY GOOD TO FOLLOW !!!

    hi
    u do not need to install any webutil in R2 u just need to configure few things.
    please read the following notes and try to configure.
    How to get up and running with WebUtil 1.06 included with Oracle Developer Suite 10.1.2.0.2 on a win32 platform
    Solution
    Assuming a fresh "Complete" install of Oracle Developer Suite 10.1.2.0.2,
    here are steps to get a small test form running, using WebUtil 1.06.
    Note: [OraHome] is used as an alias for your real oDS ORACLE_HOME.
    Feel free to copy this note to a text editor, and do a global find/replace on
    [OraHome] with your actual value (no trailing slash). Then it is easy to
    copy/paste actual commands to be executed from the note copy.
    1) Download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
      and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.
    2) Copy or move jacob.jar and jacob.dll
      [JacobStage] is the folder where you extracted Jacob, and will end in ...\jacob_18
         cd [JacobStage]
         copy jacob.jar [OraHome]\forms\java\.
         copy jacob.dll [OraHome]\forms\webutil\.
      The Jacob staging area is no longer needed, and may be deleted.
    3) Sign frmwebutil.jar and jacob.jar
      Open a DOS command prompt.
      Add [OraHome]\jdk\bin to the PATH:
         set PATH=[OraHome]\jdk\bin;%PATH%
      Sign the files, and check the output for success:
         [OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\frmwebutil.jar
         [OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\jacob.jar
    4) If you already have a schema in your RDBMS which contains the WebUtil stored code,
      you may skip this step. Otherwise,
      Create a schema to hold the WebUtil stored code, and privileges needed to
      connect and create a stored package. Schema name "WEBUTIL" is recommended
      for no reason other than consistency over the user base.
      Open [OraHome]\forms\create_webutil_db.sql in a text editor, and delete or comment
      out the EXIT statement, to be able to see whether the objects were created witout
      errors.
      Start SQL*Plus as SYSTEM, and issue:
         CREATE USER webutil IDENTIFIED BY [password]
         DEFAULT TABLESPACE users
         TEMPORARY TABLESPACE temp;
         GRANT CONNECT, CREATE PROCEDURE, CREATE PUBLIC SYNONYM TO webutil;
         CONNECT webutil/[password]@[connectstring]
         @[OraHome]\forms\create_webutil_db.sql
         -- Inspect SQL*Plus output for errors, and then
         CREATE PUBLIC SYNONYM webutil_db FOR webutil.webutil_db;
      Reconnect as SYSTEM, and issue:
         grant execute on webutil_db to public;
    5) Modify [OraHome]\forms\server\default.env, and append [OraHome]\jdk\jre\lib\rt.jar
      to the CLASSPATH entry.
    6) Start the OC4J instance
    7) Start Forms Builder and connect to a schema in the RDBMS used in step (4).
      Open webutil.pll, do a "Compile ALL" (shift-Control-K), and generate to PLX (Control-T).
      It is important to generate the PLX, to avoid the FRM-40039 discussed in
      Note 303682.1
      If the PLX is not generated, the Webutil.pll library would have to be attached with
      full path information to all forms wishing to use WebUtil. This is NOT recommended.
    8) Create a new FMB.
      Open webutil.olb, and Subclass (not Copy) the Webutil object to the form.
      There is no need to Subclass the WebutilConfig object.
      Attach the Webutil.pll Library, and remove the path.
      Add an ON-LOGON trigger with the code
             NULL;
      to avoid having to connect to an RDBMS (optional).
      Create a new button on a new canvas, with the code
             show_webutil_information (TRUE);
      in a WHEN-BUTTON-PRESSED trigger.
      Compile the FMB to FMX, after doing a Compile-All (Shift-Control-K).
    9) Under Edit->Preferences->Runtime in Forms Builder, click on "Reset to Default" if
      the "Application Server URL" is empty.
      Then append "?config=webutil" at the end, so you end up with a URL of the form
          http://server:port/forms/frmservlet?config=webutil
    10) Run your form.

  • How to erase and install new version os Mac Os X?

    Can someone tell me how to erase and install new copy of Mac OS X 10.5.8 ?? IS there a way to do this without CD?? I no longer have the disks and I cant find a way to get this done.. The reason I want to do this is because a 12 year old was using this computer for a long time and there is a lot of junk stuff on the disk, so I want to start from fresh.
    Thank you in advance.
    Yani.

    Hi Yani,
    Your out of luck without an Install Disc, & on dangerous ground also.
    2 ways to go...
      1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
       2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
          *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
       3. Click the Erase tab.
       4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
       5. Select your Mac OS X volume.
       6. Highlight the drive, select Partition Tab, then Format type... MacOS Extended Journalled, select the Security Options button, choose Zero Out Data, Erase... after completion do a new install.
    Or...
    Open System Preferences>Accounts, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    In the same pref pane highlight your old account, click the little minus icon, then use Disk Utility to Secure Erase Free Space.

  • How to compile and run java program at command console

    hi there
    can anyone tell me how to compile and run a java program at command console? I have installed JRE 1.3.1, and also have installed JBuilder 5 if it helps.

    try this
    System.out.println("Enter your Name : ");
    BufferedReader console = new BufferedReader( new InputStreamReader( System.in ) );
    String s = console.readLine();
    System.out.println("Hello : "+ s+" !" );

  • Consistent annoying problem when compiling and installing Apache modules.

    Every time I build and install mod_jk for Apache (Since binaries are no longer available for Apache 1.3.x on Mac OS X, we have to build it ourselves.), everything goes smoothly until the final 'sudo make install,' and then it finishes with:
    Libraries have been installed in:
    /usr/libexec
    Which is nice, but they're supposed to be installed in /usr/libexec/httpd in Mac OS X. (I don't know if this is a problem for Mac OS X Server too, but I'm using regular old Mac OS X 10.4.10, so I'm posting this here.)
    I'm using this when I call configure:
    % ./configure --with-apxs=/usr/sbin/apxs
    and /usr/sbin/apxs says:
    my $CFG_LIBEXECDIR = q(/usr/libexec/httpd);
    but the resulting Makefile says:
    libexecdir=${APACHE_DIR}/libexec
    So it appears to be ignoring the definition from apxs. It also appears that the definition of libexecdir appears to be variable only up until libexec. It looks like you can't tell it to use a subdirectory.
    It's easy enough to just move the installed files into the httpd directory, with sudo mv /usr/libexec/mod_jk.* usr/libexec/httpd, but it's a little annoying to have to remember to do this every time I upgrade mod_jk.
    Has anybody else run into this with this or other modules? Is it a bug that should be reported to either Apple or Apache? Does anybody have a better solution than moving the files?

    MoonSwan wrote:I have a desktop system and a netbook that I would like to have hibernating when they aren't being used.  The wiki outlined roughly how to accomplish this with this page:  https://wiki.archlinux.org/index.php/Tuxonice
    I downloaded from the AUR the kernel26-ice 2.6.38-4 to compile and install.
    Hm... netbook.
    If you don't mind trying bfs and bfq too, then you could give the pf-kernel that is mentioned in the wiki too a try:
    http://aur.archlinux.org/packages.php?ID=50956
    It has a repository here:
    [pfkernel]
    Server = http://dl.dropbox.com/u/11734958/$arch
    and a thread: https://bbs.archlinux.org/viewtopic.php?id=103462
    I'm not quite sure how netbook performance is affected by BFS...
    It has the bonus to already be based on 3.0.
    Last edited by Cdh (2011-07-28 20:35:50)

  • Compiling and installing the AUR Blacs-mpi package

    I'm trying to install blacs-mpi (dependance for mumps) and have run into the following issue:
    make[1]: Leaving directory `/usr/local/src/blacs-mpi/src/BLACS/TESTING'
    libblacs.a(BI_BlacsErr.o): In function `BI_BlacsErr':
    BI_BlacsErr.c:(.text+0x138): undefined reference to `__stack_chk_fail_local'
    libblacs.a(BI_BlacsWarn.o): In function `BI_BlacsWarn':
    BI_BlacsWarn.c:(.text+0x128): undefined reference to `__stack_chk_fail_local'
    ==> ERROR: A failure occurred in build().
    Aborting...
    If my understanding is correct, this is a run-time stack overflow verification error and is possibly occurring because blacs-mpi is pointing to some non-existent library. However, I have no idea what library this could be (or if I'm right).
    Can anyone point me in the right direction?
    Thanks!
    Link to AUR package: https://aur.archlinux.org/packages/blacs-mpi/

    MoonSwan wrote:I have a desktop system and a netbook that I would like to have hibernating when they aren't being used.  The wiki outlined roughly how to accomplish this with this page:  https://wiki.archlinux.org/index.php/Tuxonice
    I downloaded from the AUR the kernel26-ice 2.6.38-4 to compile and install.
    Hm... netbook.
    If you don't mind trying bfs and bfq too, then you could give the pf-kernel that is mentioned in the wiki too a try:
    http://aur.archlinux.org/packages.php?ID=50956
    It has a repository here:
    [pfkernel]
    Server = http://dl.dropbox.com/u/11734958/$arch
    and a thread: https://bbs.archlinux.org/viewtopic.php?id=103462
    I'm not quite sure how netbook performance is affected by BFS...
    It has the bonus to already be based on 3.0.
    Last edited by Cdh (2011-07-28 20:35:50)

  • How to compile and register a Java CFX tag with multiple class files?

    All-
    If this is the wrong forum for CFX questions, please let me
    know.
    I need to determine how to compile and register a Java CFX
    tag that contains multiple class files. One class file implements
    the CustomTag interface and the other class files implement various
    supporting classes. All of the documentation that I have found
    talks about using a single class file. I am assuming that a JAR
    file will be involved, but I am not sure of the specifics.
    Thanks in advance for your help.
    -Josh

    Yes, it will involve a jar. Use your java IDE (eclipse,
    etcetera ..) to create a jar containing all of the classes. Check
    your ide's documentation for how to create jar files. After you
    have created the jar, place the jar in the CF class path so CF will
    recognize it. For example the {cf_root}/WEB-INF/lib directory. CF
    must be restarted before it will detect the new jar. After
    restarting CF, register the CFX tag in the ColdFusion Administrator
    using the name of the class that implements the CustomTag
    interface.
    Though it is worth noting you can also instantiate java
    classes directly from ColdFusion (ie without using a CFX
    tag).

  • How to create and install a toolbar to a browser using java

    Hi all,
    Can any one guide me about how to create and install toolbar to a browser using java ??
    please any one help me about this,i am not getting any idea about this..
    Thanks and Regards
    Sandesh S

    I doubt you can. Those browser toolbars are done by implementing to an API provided by the browser. That API, I don't believe, is provided via Java. But of course, that would be entirely up to the browser, not Java.

  • I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

    I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

    cr is installed by updating your app.  use help>update, or update manually
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

Maybe you are looking for