How to compress aggregate only

Hi
we have process chain which got failed because of activation of ods. I done it manually and this ODS is updates further two cube.
Both Cube is having setting "compress after Rollup" as we are only compressing aggregates of those cubes .
After Further update , data from ODS to Cubes has gone.
Then I done manuall aggregate rollup.
In that One cube is done successful Rollup + compression of aggregate.
Another is done successful Rollup + unsuccessful Compression of aggregate.
Could you please let me know how do I compress aggreage for the anotehr cube manually.
Waitng for reply.

the only "standard" options are then:
- delete, reconstruct and rollup this request making sure the compress indicator is SET.
- reactivate an refill this aggregate (also make sure to have the compress indicator SET); this will depend of course how big is your ICube...
Another Option would be to kick the following function module RSDDK_AGGREGATE_CONDENSE, however it works only under certain circumstances an it's quite tricky... I recommend to go standard...
Should you decide going with the FM please do that first in a DEV sys
hope this helps...
Olivier.

Similar Messages

How can config for SNP Aggregate only aggregate demand not stock on hand?

Dear SCM Expert,
Now we want the system aggregate only demand and not aggregate stock on hand ( Stardard system aggregate both of them) so what i have to do?
thanks so much.

Hi
The stock on hand is a calculated key figure. It is calculated based on macros. So you have to write a macro or you can copy the stock balance macro logic from the standard detailed book. In the detailed book no aggregation is done. But to avoid aggregating stock on hand you have to put logic in the macro
Thanks
Aparna

Compressing Aggregates in Historical Cubes

Hi,
I have a historical cube to which we no longer load data. How do I compress the aggregates built on it? The cube is completely compressed but the daily change run has inserted some records in the aggregate's F table.
I used to know the answer to this question but cant recall now....can somebody get to it before I find out
Thanks

wow all three same answers...
But how can I rollup since I dont have any new requests to roll-up. I thought that check mark compresses the aggregates only after roll-up.
I dont have any new requests to roll-up since we dont load the cube any more
AND
How will that setting compress after change run since that the reason why I am getting entries in F table of aggregates.
any more answers
thanks

How can I delete only one part of my xml file?

Hello,
I stored more than 100 users in only one xmltype column. For instance
Create table agro(users XMLTYPE);
... and I inserted all users inside
INSERT INTO agro values(XMLTYPE
('<?xml version="1.0" encoding="ISO-8859-1"?>
<authentication><users><user>
<name>cocoon</name>
<password>cocoon</password>
<role>admin</role>
<title>Mr.</title>
<firstname>Walter</firstname>
<lastname>Cocoon</lastname>
<company />
<street />
<zipcode />
<city />
<country>DE</country>
<phone />
<fax />
<email />
<bankid />
<bankname />
<accountid />
</user>
... another user, etc.
</users></authentication>'));
Now I tried to delete only one part of this file. For example all persons with the name"cocoon".
I used for this target the following statement:
DELETE FROM agro agro
WHERE agro.users.extract('authentication/users/user/text()').getStringVal()= 'cocoon';
When I execute this statement, Oracle DB delete all users and not only with the name "Cocoon".
How can I delete only one part of my xml file?
Kind Regards
M R

This the expected behavoir. You uploaded a document containing multiple users and then asked XML DB to delete any documnet that contained a user with the name in question. The problem here is that you are creating a mega document that contains an aggregation of user documents but then trying to work with individual user documents. This is a bad idea.
In general XML does not understand the concept of a collection of documents. It can only operate on one document at a time. Hence the tendancy to aggregate individual documents into a single larger document. Once you have an XML database, you can perform operations on collections of document, as easily as you can perform operations on individual documents, so the need to aggregate the individual documents together disappears.
If you store each user document as a seperate document then your delete will work as expected.

How to compress leafs of the hierarchy

Hi guys
I have a hierarchy for some levels.
Level 1
Level2
Level3
i want to show the results for the Nodes. I dont want to show up the leafs. How to compress leafs
and how to achive this
Regards
AK

Hi matt,
Root is also required.
I cannot remove office city, coz the same hierarchy is required for some other reports.
I want see only
North                         - 25
        -City1                 - 15
        -City 2                - 10
South                          -30
          -City3                -15
          -City4                -15
West                            -40
           - city 5              -20
           - City 6              -20
East                             -80
        -City 7                  -40
        -City8                   -40
I want to show the north, west, south, east .     values. i dont want to see the leafs
Regards
AK

How to compress my file

Hi,
I am working on a wedding video that I shot with two cameras. I have edited it down and the final project was about 2 hours and 10 minutes. I used compressor and converted it to a mpeg2 which reduced the file to 1.9 gigs. However, I have come to discover that IDVD does not accept that file type.
Next I re compressed it into a .mov, but that only reduced it to 10 gigs - which won't fit on a standard size dvd...
I re-edited the film to 1 hour and 30 minutes, but still the file size is just over 7 gigs as a .mov.
Does anyone have any suggestions on how to compress it without having to whittle it down to under an hour?
Thanks for your help.

When I initially finished the project, I exported as a Quicktime movie and it was 49+ gigs! (Yikes!)
Still learning the Final Cut Suite and opened up Compressor for the first time realizing that it was the tool I needed. I compressed it down to 1.91 gigs, but did so as a .mpg - which I learned was not compatible with either iDVD or Studio Pro.
That's when I scrolled down the list of "settings" and realized I could make it a .mov, which only got it down to 10 gigs. Which is where I was when I posted for help.
I think I finally got it now, thank you so much for the help and advice...

How to compress DV into smaller size?

Hi.
I need to know how to compress a DV file to say 60% of it's original size. I'm trying to pre-compress these files so that they will fit on a single DVD without using Toast on the final burn. In other words I want to compress the DV files without compressing the DVDSP menus etc.
Sandy

sandy, are you trying to make a data dvd with a quicktime (dv compressed) movie file or a dvd-video?
in the first case; dv has only one compression setting, there is no way to change it, unless you compress using a different codec.
in the latter case, you'll be wanting to compress to m2v (mpeg2) and probably ac3 for the audio
hope this helps

How to compress AVI files in Lion sending by mail

Hi ALL,
As the titel says, AVI file size is now 36Mb.
How to compress the AVI file so that I can sent it by Mail.
Dimaxum

The only way is to reduce the length or the size or the quality with a video editor. Probably all three. Usually, video files are too big for email. You should find a different method of transferring it.

How to compress a pdf file without quality loss

How to compress a pdf file without quality loss? Please help....

With the way you worded the question, your only option is to zip (or equivalent) the PDF. There are options in terms of graphic compression (this is generally a loss of quality in reducing the pixels) and nonstorage of fonts (likely making the file unreadable to some). So there are techniques, but with a tradeoff. It all depends on what you mean by loss of quality.
The other techniques that do not lose quality, but give up on some functionality are to remove links, bookmarks, and tags. The tags are often necessary only for converting a PDF back to another form and maintaining accessibility - important in some business situations. These are all tradeoffs that give something up.

Aggregate only portion of sparse dimension

System 9 BI+(9.3) - Here's my problem.
I need to aggregate only a portion of a sparse dimension.
All members are stored data. Dimension looks like this:
Total Europe
-Western Europe
--France
--Germany
--United Kingdom
--Iberia
---Spain
---Portugal
-Central Europe
-Eastern Europe
I tried
FIX(May, 2009, @IDESCENDANT("Iberia"))
agg(Products,Channel)
ENDFIX
but all it does is aggregate Spain and Portugal, but not Iberia.
I also tried
FIX(May, 2009, @IDESCENDANT("Western Europe"))
agg(Products,Channel)
ENDFIX
but again all it does is aggregate France, Germany, Spain, Portugal, bit not Iberia or Western Europe.
Any ideas/assiatnce appreciated.

The comment on Network54 (sorry, I forgot who posted it) is on the money -- you are not aggregating Region/Geography/whatever your dimension is called.
Assuming your dimension order is:
Region
Products
Channel
I would write a script like:
FIX(@LEVMBRS("Products", 0), @LEVMBRS("Channel", 0))
@IDESCENDANTS("Iberia") ;
ENDFIX
FIX(@IDESCENDANTS("Iberia"))
AGG("Products", "Channel") ;
ENDFIX
You will have to rearrange this a little bit if your dimension order is different. As an example, if your dimension order is Products, Region, Channel, your code might look like:
FIX(@RELATIVE("Iberia", 0), @LEVMBRS("Channel"))
AGG("Products") ;
ENDFIX
FIX(@IDESCENDANTS("Products"), @LEVMBRS("Channel"))
@IDESCENDANTS("Iberia") ;
ENDFIX
FIX(@IDESCENDANTS("Products"), @IDESCENANTS("Iberia"))
AGG("Channel") ;
ENDFIX
This may look painful, but you may find a significant performance increase.
Take a look at my blog post, ignore all the Planning stuff, and jump to the bit where I explain how a BSO db consolidates. The concept is identicial to the one I outline above. Here's the link: http://camerons-blog-for-essbase-hackers.blogspot.com/2009/06/why-i-hate-and-love-business-rules-part_17.html
Regards,
Cameron Lackpour

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

How can I sync ONLY the top photo in the stack?

I sync various Aperture photo albums to my IPad and iPhone. The problem is that when I have 'stacked' images (eg. one image showing in the album and two other copies 'hidden' underneath), all of the photos in the stack are copied to the ipad and iPhone. So instead of seeing just one version of an image, I see as many as are in the stack. How can I sync ONLY the top photo in the stack?
Thanks for your help!

I solved my own problem.
The sync problem seemed to only occur on smart albums. There is a new check box option in Aperture 3 when making a smart album: "sync stack pick only." One click and the problem is solved!

How can I print ONLY the active document?

Whenever I go to File/Print the darn PSE 9 program sends all of the working files in the bin to the printer. I've searched online for 2 hours now looking for an answer.
I like to work with having several to many files in the 'bin' and prefer to only print the active file I'm currently working on without having to close the 'working files' before I can print. How can I print ONLY the active document or file in the project bin? Please help, I've upgraded from PSE 3 to PSE 9 and really like the updated features, but this one pain in the neck default is getting the best of me.

Thanks for your help, that works nicely. It is good to have control of the printer again.

How can I show only text edits and not text formatting when using print comments summary?

Acrobat 9.3.0 for Mac.
Here is the scenario: I used the Compare command to see the changes between 2 PDFs. The resulting file some edits are inserts and some are deletions. I want to print a comments summary only showing the text edits. In the Compare Option pane, I select Text and deselect Images, Annotations, Formatting, Headers/Footers, and Backgrounds. Now on the screen I see inserts are highlighted in blue and deletions are marked with sort of a caret and vertical bar symbol. So all looks good at this point. However, when I show the Comments List, I see addtional comments that indicate "Replace - The following text attributes were changed: fill color." Those comments do not appear in the page view unless I check the Formatting check box to show them. With Formatting unchecked, I print a comments summary and all of the "Replace - Fill Color" comments" appear on the resulting comments summary.
I only want to show text edits, not text formatting changes. So questions are:
1. Why, when the Formatting checkbox is unchecked, do the text formatting comments still appear in the comments list when they do not appear on the page display.
2. How can I print only the text content edits and not show the text formatting changes when using Print Comments Summary.

Hi,
You can set ExecuteWithParams as default activity in the task flow then method activity to return total no of rows passing to Router activity if your method has value 0 then call Create insert operation else do directly to page.
Following idea could be your task flow
Execute With param (default) > SetCurrentRowWithKey > GetTotalNoOfRows (VOImpl Method)
|
v
Router
1. If pageFlowScope outcome is 0 then call CreateInsert > MyPage
2. if pageFlowScope outcome > 0 then MyPage
hope it helps,
Zeeshan

I do not want all of the playlists in iTunes to be synced to my iPhone. With iCloud I do not seem to have a choice. How do I select only certain playlists for my iPone?

I have many songs and playlists in my iTunes account. I do not want all of them synced to my iPhone 5S, but that has happened via iCloud, and it has caused a storage problem on my phone. How do I select only certain playlists to be synced to my iPhone?

You need to start over with Music. On the iPhone Music screen uncheck sync music. Also, on the Summary screen uncheck "Manually manage music and videos", then sync and it should clear off your phone.
Next, choose the music you want to sync. If you want to fit more on check "Convert higher bit rate songs to 128 kbps AAC". This will reduce quality slightly, but it won't be noticable unless you are using $300 headphones.

How to compress aggregate only

Similar Messages

Maybe you are looking for