How to config BSP to run in public network
Dear BSP experts
I am new to BSP development , i have create one BSP application , and test ok in SAP , and got the URL of the BSP ,it can be tested within our company using the URL , but not outside . so do i need to config something so i can run this BSP application anywhere ? and how ? thanks
Best Regards
Jacky
Hi Jacky,
You need to assign public IP to your SAP system to be accessed from internet (outside your LAN) and the domain name to be assigned to the server and registered in DNS.
Otherwise, use web dispatcher to catch and redirect the requests to SAP server.
Regards,
Ravi
Similar Messages
-
How could become my iPhone runs on all networks
How could become my iPhone runs on all networks
There is no "format" to change.
No one can help you if you cannot or will not clearly explain the problem. -
How to Pass password to Run as a Network Account in powershell
Hello,
I ve been asked to raise this as a new topic as given in the link. The response also says that it is not possible to pass the password of a network account in powershell. How else can I implement the requirement?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/41a4ba3d-93fd-485b-be22-c877afff1bd8/how-to-run-a-powershell-script-in-admin-account?forum=ITCG&prof=required
My requirement is that, I am need to run the powershell script via a network account. The powershell is called via a script on an ETL tool. When I ask it to print the output of the below command, the output says " Enter
the password of domain\username:".
PS > runas
/user:{domain}\{username} powershell -file {nameOfPowershellScript.ps1}
Hence I had to modify the code to pass the password also in the same command. I am new to powershell scripting and the below command doesn't work.
Please suggest the appropriate way to pass the password of the network account.
Referred to a link http://technet.microsoft.com/en-us/magazine/ff714574.aspx.
$password = Get-Content c:\temp\password.txt | ConvertTo-SecureString
$credential = New-Object System.Management.Automation.PSCredential
"CachedUser",$password
PS > runas
/user:{domain}\{username} powershell -file {nameOfPowershellScript.ps1}
PS >$credential.Password | ConvertFrom-SecureString | Set-Content
c:\temp\password.txtThanks for the pointer. Question that I have is I am referencing sqljdbc4.jar in my application, which in turn using sqljdbc_auth.dll.
Which one should i refernce through <nativelib>. Is it sqljdbc4.jar or sqljdbc_auth.dll.
have added the following line to the .jnlp.
<nativelib href="sqljdbc4.jar"/>
But still it is complaining on sqljdbc_audth.dll. If it is sqljdbc_auth.dll, can I use <nativelib> to pass it.
In that case does it need to be signed?. If so,
Is it possible to sign .dll using 'jarsigner'?.
Edited by: 878645 on Apr 26, 2012 3:43 PM -
Renaming /sap/public for BSP applications running on WAS 6.20?
/sap/PUBLIC is created by default on the 6.20 WAS, and BSP applications fetch mime objects from /sap/PUBLIC/bsp/sap/public -- is it possible to rename /sap/PUBLIC to something else, like /sap/MYPUBLIC?
An alias would probably work just as well. However, I'm not sure if it will solve the problem we're facing: we have a complex portal running behind a reverse-proxy. Through the portal users access applications on to WASs -- both of them have files referring to /sap/public/...
The problem is that since both are behind a reverse-proxy from the user's side all the requests are made to the same host, and the reverse-proxy has to figure out by looking at the URL to which server it should forward request. So in the case of the applications on the WAS it can't distinguish between one /sap/public and the other.
I'm no BSP programmer -- suppose an alias was created -- am I right to guess that all the references in the BSP files to /sap/public will need to be manually changes to /sap/<new alias>? or is there some way to do it automatically?
Thanks,
Alon. -
How to config the Default Values in IT 2006
Dear Gurus,
My Client requirement is if i create Absence quota they want default quotas values
eg PL= 40
CL=7
SL=5
Then how to config the Default Values in IT 2006
Other wise where i have to assign in Quotas limit
Please advised
Regards
MHPOConfigure ur Absence Quotas with Selection group and assign the value of that selection group in Quomo
and run RPTQTA00
Time Data Personnel Time Management IMG Managing Time Accounts Using Attendance/AbsenceRecording and Administration Define Absence Quota Types. Time Quota Types Quotas
PersonnelIMG Managing Time Time Data Recording and Administration Time Management Calculating Absence Entitlements Accounts Using Attendance/Absence Quotas Permit Quota Generation Without TimeAutomatic Accrual of Absence Quotas Evaluation.
Time Time Evaluation Personnel Time Management IMG Set Personnel Subarea Groupings for Time Recording.Evaluation Settings
PersIMG Time Data Recording and Administration onnel Time Management Calculating AbsenceManaging Time Accounts Using Attendance/Absence Quotas Set Base Entitlements Rules for Generating Absence Quotas Entitlements Base Entitlement for Absence Quota Generation.
Personnel TimeIMG Managing Time Accounts Time Data Recording and Administration Management Rules for Calculating Absence Entitlements Using Attendance/Absence Quotas Determine Validity and Deduction Periods.Generating Absence Quotas
IMG Managing Time Data Recording and Administration Personnel Time Management Calculating Absence EntitlementsTime Accounts Using Attendance/Absence Quotas Define Set Base Entitlements Rules for Generating Absence Quotas Generation Rules for Quota Selection.
Define Public Holiday Work Schedules Personnel Time Management IMG Classes
Personnel Work Schedules Personnel Time Management IMG Group Personnel Subareas for the Work ScheduleSubarea Groupings
IMG Group Personnel Subarea Groupings Work Schedules Personnel Time Management Personnel Subareas for theDaily Work Schedule
Daily Work Schedules Work Schedules Personnel Time Management IMG Define Daily Work Schedules
Work Personnel Time Management IMG Define Period Work Schedules. Period Work Schedules Schedules
IMG Define Day Day Types Work Schedules Personnel Time Management Types.
Day Types Work Schedules Personnel Time Management IMG Define Day Types.
Day Work Schedules Personnel Time Management IMG Define Special Days.Types
Work Personnel Time Management IMG Define Employee Subgroup Work Schedule Rules and Work Schedules Schedules Groupings
Work Work Schedules Personnel Time Management IMG Define Groupings for the Public HolidaySchedule Rules and Work Schedules Calendar.
Work Work Schedules Personnel Time Management IMG Set Work Schedule Rules and WorkSchedule Rules and Work Schedules Schedules.
Work Work Schedules Personnel Time Management IMG Generate Work Schedules ManuallySchedule Rules and Work Schedules
IMG Set Planned Working Time Work Schedules Personnel Time Management Default Value for the Work Schedule.
Personnel Time Management IMG Set Default Value for Time Management Planned Working Time Work Schedules Status.
Time Data Recording and Personnel Time Management IMG Define Personnel Subareas for Substitution Substitutions Administration Types.
Time Data Recording and Personnel Time Management IMG Set Defaults for Substitution Types. Substitutions Administration
IMG Absences Time Data Recording and Administration Personnel Time Management Group Personnel Subareas for Attendances and Absence Catalog Absences.
Time Data Recording and Personnel Time Management IMG Define Absence Types. Absence Catalog Absences Administration
IMG Absences Time Data Recording and Administration Personnel Time Management Define Counting Classes for the Period Work Absence Counting Absence Catalog Schedule.
Time Data Recording and Personnel Time Management IMG Rules for Absence Counting Absence Catalog Absences Administration Group Employee Subgroups for Time Quotas.Absence Counting (New)
IMG Absences Time Data Recording and Administration Personnel Time Management Group Rules for Absence Counting (New) Absence Counting Absence Catalog Personnel Subareas for Time Quotas
Time Personnel Time Management IMG Absence Absence Catalog Absences Data Recording and Administration Define Rules for Rounding Counted Rules for Absence Counting (New) Counting Absences
Time Data Recording and Personnel Time Management IMG Rules for Absence Counting Absence Catalog Absences Administration Define Counting RulesAbsence Counting (New)
Personnel TimeIMG Absence Catalog Absences Time Data Recording and Administration Management Define Counting Rules Rules for Absence Counting (New) Absence Counting Deduction rules for Absence quotas
Time Personnel Time Management IMG Absence Absence Catalog Absences Data Recording and Administration Assign Counting Rules to Absence Types.Counting
Personnel TimeIMG Attendances/Actual Working Time Data Recording and Administration Management Define Attendance Types.Times
Time Personnel Time Management IMG Attendances/Actual Working Times Data Recording and Administration Assign Counting Rules for Attendance counting (New) Attendance counting Rules to Attendance Types.
Time Data Personnel Time Management IMG Managing Time Accounts Using Attendance/AbsenceRecording and Administration Define Absence Quota Types. Time Quota Types Quotas
PersonnelIMG Managing Time Time Data Recording and Administration Time Management Calculating Absence Entitlements Accounts Using Attendance/Absence Quotas Permit Quota Generation Without TimeAutomatic Accrual of Absence Quotas Evaluation.
Time Time Evaluation Personnel Time Management IMG Set Personnel Subarea Groupings for Time Recording.Evaluation Settings
Time Data Recording and Administration Personnel Time Management IMG Managing Calculating AbsenceTime Accounts Using Attendance/Absence Quotas Set Base Entitlements Rules for Generating Absence Quotas Entitlements Base Entitlement for Absence Quota Generation.
Personnel TimeIMG Managing Time Accounts Time Data Recording and Administration Management Rules for Calculating Absence Entitlements Using Attendance/Absence Quotas Determine Validity and Deduction Periods.Generating Absence Quotas
IMG Managing Time Data Recording and Administration Personnel Time Management Calculating Absence EntitlementsTime Accounts Using Attendance/Absence Quotas Define Set Base Entitlements Rules for Generating Absence Quotas Generation Rules for Quota Selection. -
How to config VIPs after installation
Dear All,
Could you show me how to config virtual ip and virtual host after installation.
Thanks for your helpAt the end of the Oracle Clusterware software install a number of Configuration
assistants are run automatically. In that Virtual IP configuration assistant configures the VIPS for you.
To run it manually, To re run vipca run the vipca.bat (root.sh in linux) file from the Oracle clusterware bin directory.Follow the prompts for VIPCA to select the appropriate interface for the public network, and assign the VIPs for each node when prompted. Manually running VIPCA with the same IPs should complete successfully.
Hope this helps. -
How to config status in Search in T-code : cic0
Dear All
We just upgrade from CRM 2.0c to CRM 5.0 . How to config status in Search in T-code : cic0, because the status in the Search transaction, is different from the Activity transaction . Please help.
Thank and best regards,
VimolHi Vimol,
If you are talking about the custom search help, please follow the following steps to add a custom search criteria for CIC0.
1. Run transaction SPRO.
2. Click on SAP Reference IMG tab on application tool bar.
3. Select Customer Relationship Management node.
4. Select Interaction Center Winclient node.
5. Select Component Configuration node.
6. Select Visible Components node.
7. Select Navigation Area node.
8. Select Define search Profile IMG activity.
9. Select the relevant Profile, and click on node view search application
within the locator.
10. Save the settings.
11. Back to main tree.
12. Select define search in locator IMG activity.
13. Click on Search id node.
14. Add the search id, text, function module, program name and screen in
the table.
<b>Reward points if it helps.</b> -
AIX 6.2 how to config Scheduler obiee 10.1.3.4
Hi
AIX Experts
I have Install AIX 6.2 server OBIEE 10.1.3.4. how to config Schedulaer in Aix server
I am getting this error when I am trying to save an Ibot.
Oracle BI Scheduler Error: [nQSError: 12008] Unable to connect to port 9705 on machine sbigsit04. [nQSError: 12010] Communication error connecting to remote end point: address = sbigsit04; port = 9705. [nQSError: 12002] Socket communication error at call=: (Number=-1) Error -1 occurred.
Error Details
Error Codes: GYFPI8RN
Please help
Advance Thanks
Satya vardhanHi,
Please see if these docs help.
Bi Server Not Running [ID 1083475.1]
Cannot start BI Server with rpd from 10.1.3.2.1 [ID 563413.1]
Oracle OBI Presentation Service logon hangs as the 'ODBC.ini' file is pointing to wrong Port for the BI Server [ID 1139513.1]
Thanks,
Hussein -
How to config PKCS11.cfg during FAXs installation
Hi guys,
I am the rookie in Flash Access and want to setup environment on my local site. I have gone through steps from quickstart guide.
I have a problem in installing license server now. I want to run Validator.bat to verify configuration, but I am getting error and paste it as below from flashaccess-global.log:
2010-08-19 12:18:22,544 INFO [com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory] Unable to initialize the PKCS11 key store factory. If PKCS11 is to be supported, please ensure 'pkcs11.cfg' is configured correctly and is supported on the target platform.
2010-08-19 12:18:22,575 DEBUG [com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory] Exception thrown while initializing PKCS11 key store factory
com.adobe.flashaccess.server.license.configuration.deployment.filebased.MultiTenantDeploym ent$DeploymentException: java.io.FileNotFoundException: C:\Program Files\Java\Tomcat\licenseserver\flashaccessserver\pkcs11.cfg
at com.adobe.flashaccess.server.license.configuration.deployment.filebased.MultiTenantDeploy ment.getGlobalResource(MultiTenantDeployment.java:171)
at com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory.<init>(PKCS11KeyStore Factory.java:100)
at com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory.createSingleton(PKCS1 1KeyStoreFactory.java:59)
at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:138)
at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:112)
Caused by: java.io.FileNotFoundException: C:\Program Files\Java\Tomcat\licenseserver\flashaccessserver\pkcs11.cfg
at com.adobe.flashaccess.server.license.configuration.deployment.filebased.MultiTenantDeploy ment$UpdatableFileSystemResource.<init>(MultiTenantDeployment.java:263)
at com.adobe.flashaccess.server.license.configuration.deployment.filebased.MultiTenantDeploy ment.getGlobalResource(MultiTenantDeployment.java:168)
... 4 more
2010-08-19 12:20:22,568 INFO [com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory] Unable to initialize the PKCS11 key store factory. If PKCS11 is to be supported, please ensure 'pkcs11.cfg' is configured correctly and is supported on the target platform.
2010-08-19 12:20:22,583 DEBUG [com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory] Exception thrown while initializing PKCS11 key store factory
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory.<init>(PKCS11KeyStore Factory.java:105)
at com.adobe.flashaccess.server.license.keystore.PKCS11KeyStoreFactory.createSingleton(PKCS1 1KeyStoreFactory.java:59)
at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:138)
at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:112)
Caused by: java.security.ProviderException: Error parsing configuration
at sun.security.pkcs11.Config.getConfig(Config.java:71)
at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:110)
at sun.security.pkcs11.SunPKCS11.<init>(SunPKCS11.java:90)
... 8 more
Caused by: sun.security.pkcs11.ConfigurationException: Unexpected value: Token['['], line 1
at sun.security.pkcs11.Config.excToken(Config.java:339)
at sun.security.pkcs11.Config.parseWord(Config.java:498)
at sun.security.pkcs11.Config.parseLine(Config.java:546)
at sun.security.pkcs11.Config.parseLibrary(Config.java:617)
at sun.security.pkcs11.Config.parse(Config.java:362)
at sun.security.pkcs11.Config.<init>(Config.java:194)
at sun.security.pkcs11.Config.getConfig(Config.java:67)
... 10 more
2010-08-19 12:20:23,990 DEBUG [org.apache.commons.configuration.ConfigurationUtils] ConfigurationUtils.locate(): base is null, name is null
2010-08-19 12:20:24,162 DEBUG [root] Appender created with name: [Partition(flashaccessserver)]
2010-08-19 12:20:24,552 DEBUG [org.apache.commons.configuration.ConfigurationUtils] ConfigurationUtils.locate(): base is null, name is null
2010-08-19 12:20:24,584 DEBUG [org.apache.commons.configuration.ConfigurationUtils] ConfigurationUtils.locate(): base is null, name is null
I have read documentation the pkcs11.cfg should not be used if doesn't enable HSM.
I am not very familiar with java application server , so maybe it's a stupid question. I am wondering how to config it to avoid error ?
Very appreciate your answer in advance.Hello Lewis,
It is always a good idea to run the Validator tool to verify a deployment.
The PKCS11.cfg file referenced below is an optional configuration file, that needs to be present/configured if-and-only-if HSM access needs to be enabled on the server.
The error you are seeing below is not something to be concerned about unless you plan to enable HSM access on the server. The stack trace is a DEBUG level log message. If you notice, the INFO log message suggests that this is not a critical error. When such an error is encountered with the PKCS11 config file, the server automatically defaults to not using HSM.
Hope that answers your question.
Regards,
Safdar -
How to install drivers for ati radeon 3200?and how to config xorg.co ?
how to install drivers for ati radeon 3200?and how to config xorg.conf?
mawch wrote:how to install drivers for ati radeon 3200?and how to config xorg.conf?
Hello
I am using ati hd 3200 which is integrated with my motherboard. If you are using arch you can download & install through pacman. The package is named like catalyst*. You can install them by issuing as root user
#pacman -Sy
#pacman -S -l | grep -i catalyst
#pacman -S catalyst catalyst-utils
After installation reboot your machine in runlevel 1. (single mode). Ensure "fglrx" module is loaded correctly using
#lsmod | grep -i fglrx
If the resultant output have "fglrx" part the module is loaded correctly. The next step is to create a working /etc/X11/xorg.conf. Backup your current xorg.conf if needed.
#cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bkup
Then issue
#aticonfig --initial --input=/etc/X11/xorg.conf
This will create a new xorg.conf file. Now we can test our confign.
#telinit 3
I am using runlevel 3 to avoid graphic messup!!
issue
#gdm
If you graphical login screen works correctly there is nothing to do more except adjust your monitor resoloution as you like.
To know your ati driver is working correctly issue as root
#fgl_glxgears
If gears are rolling happily it seems correct. You can also know more about installed ati driver
#fglrxinfo
Now the installed driver version is in the output
If there is any problem try following
##### Soloutions to solve various display problems using ATI Catalyst Drivers in Linux #####
yes video playback is choppy until i ran :-
sudo aticonfig --overlay-type=Xv
Try adding the following to the 'Device' section in /etc/X11/xorg.conf
Option "TexturedVideo" "true"
### This is a half solution for mythtv problems. Run mythtv in window (no full screen) If You have a screen resolution of 1024x768 try the command;
mythfrontend --geometry 800x600
Append the "Device" Section of /etc/X11/xorg.conf file as follows;
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
Option "OpenGLOverlay" "off"
Option "VideoOverlay" "on"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "on"
Option "Capabilities" "0x00000800"
BusID "PCI:1:0:0"
EndSection
Add following in the .bashrc of each user or /etc/bashrc file* Most Effective In My Case!!
export LIBGL_ALWAYS_INDIRECT=true
####### Arch Linux - Add the "nopat" option to the /boot/grub/menu.lst or /boot/grub/grub.conf
####### as in the following example
title Archlinux Ice Kernel
root (hd0,1)
kernel /boot/vmlinuz26-ice root=/dev/sda2 ro resume=/dev/sda3 quiet splash nopat
initrd /boot/kernel26-ice.img
NB: REGULAR DISCLAIMER IS ALSO APPLICABLE TO THE ABOVE MATTER; USE IT AT YOUR OWN RISK !!! ALL THE ABOVE INFORMATION IS COLLECTED FROM VARIOUS POSTINGS IN THE FORUM AND FROM MY OWN EXPERIENCE
Wish U good luck
mvdvarrier -
How to config work flow for approval in snp?
Dear Expert,
we want to running TLB for deployment stock orders which are approved by leaders.
please tell us how to config work flow for approval in snp?
thanks so muchHi,
I got to know from DB49 that some workflow is available in GATP, but as far as I know, there is no such possibility in SNP.
Deployment stock transfer kind of data exists in livecache order series, and it's very tough to manipulate it in some way to suit the approval workflow.
As far as I can propose, you would need to do following (big custom development):
1) Create a custom transaction
2) Read Deployment Stock transfer data in accordance with your selection criteria and display it to the relevant user/approver
3) User would accept/reject the Deployment Stock Transfer. This action is possible in a custom transaction.
4) If Deployment Stock transfer is rejected, delete it from livecache
5) Now when you run TLB, only approved Deployment Stock Transfer would be available to be coverted to STOs.
In the above development, you could create logs/reports as you need for audit kind of purpose.
This won't be a very simple development, but it's possible.
May be someone could give you some better alternative.
Thanks - Pawan -
How to config J2EE Server in netweaver studio
Hai can one tell me how to config J2EE SERVER to my webdynpro application.
i created first web-dynpro application. in last step it is asking for server connection
i am going to window -- > Preferences --> SAP J2EE ENGINE
after that plz tell me how to get
1) message server host
2) message server port
3) system name
4) j2ee instance
5) SCS instance
These values how can i get.
plz tell me how to run succesfully my webdynpro application.?Hi,
http://<hostname>:<port no>/sap/monitoring/SystemInfo
In this page you wil have all the system information..
The port no will usually be 50000.
Web AS Java is sufficient.. no other components are necessary for running the web dynrpo application.
Check this discussion !
Re: SDM Error while deploying from IDE
Regards
Bharathwaj
Message was edited by: Bharathwaj R -
I am using the OS: Win2000 Server.I need to connect to some remote DataBase,but I
don't know how to config the driver in the CLASSPATH environment variable, my Problem is: when I import the oracle.jdbc.driver.OracleDriver ,and run the program, it warns to me that it cannot find the class,and i know i didnot config the CLASSPATH in environment variables, so I want someone to tell me how to config it ,and where should the file "class12.zip" be placed !
Thank you! maybe the problem is a piece of cake for you ,but now i do not know how to deal with it!Hi ,
try this,
http://myjdbc.tripod.com/basic/jdbcurl.html
Regards
Elango. -
How to config failover beetwen 2 domain?
I have 2 Tuxedo domains, each have 2 machines run loadbalancing.
I want to know how to config failover in each domain
For Example:
Domain1:
192.168.100.101 (master)
192.168.100.102
Domain2:
192.168.100.111 (master)
192.168.100.112
I have some tpcall process from domain1 to domain2
How to config to:
When master server in domain2 die, they still work.
How to config domain gateway?
How to config NWADDR?
How to config alternative IP for failover?
Thank you very much.
AMThe best way to do this is to configure a domain gateway process on both the
master and non-master on each domain and use Domains-Level Failover and
Failback as documented at
http://e-docs.bea.com/tuxedo/tux90/add/addom.htm#1257891
If you also need to migrate application servers within a domain, you can
refer to "Migrating Your Application" at
http://e-docs.bea.com/tuxedo/tux90/ada/admigt.htm
If application servers on each domain are to be
<Debug Caster> wrote in message news:[email protected]..
I have 2 Tuxedo domains, each have 2 machines run loadbalancing.
I want to know how to config failover in each domain
For Example:
Domain1:
192.168.100.101 (master)
192.168.100.102
Domain2:
192.168.100.111 (master)
192.168.100.112
I have some tpcall process from domain1 to domain2
How to config to:
When master server in domain2 die, they still work.
How to config domain gateway?
How to config NWADDR?
How to config alternative IP for failover?
Thank you very much.
AM -
How to config JMS queues for non-AQueue products? Only config files?
Assume I have the requirement NOT to use Oracles built-in Aqueue JMS provider but use another (external)product like:
Apache ActiveMQ, JBossMQ, IBM MQseries,... instead.
Can I config these JMS products through OC4Js web browser config web pages as well or am I forced in such cases to use configuration through XML config files?
How do I tell OC4J NOT to use internal JMS Aqueue queues but use other JMS product?
Peter"lilian zhu" <[email protected]> wrote:
>
Hi,
i am having a admin server running on port 7001 for servlet1 and managed
server
running on port 8001 for servlet2. how can config the httpd.conf to make
the apache
web server recongize both uri path?
i tried <IfModule mod_weblogic.c> WebLogicHost localhost WebLogicPort
7001</IfModule>
and <IfModule mod_weblogic.c> WebLogicHost localhost WebLogicPort 8001</IfModule>,
only can recongize port 8001.
i also tried WebLogicCluster localhost:7001,localhost:8001, doesn't work.
i would like to know, for my case, will the clustered server work, how
can i make
this working for non-clustered servers?
Thanks.
Lilian
Hi,
we have the same problem. We are running two non-clustered weblogic servers and
we want to configure only a failover
with the plugin.
We contacte the bea support but we haven't find a solution.
Greetings
Hans.
Maybe you are looking for
-
SECURITY CODE CHANGED IN NOKIA 5300 XPRESSMUSIC
Hey everybody, this is my damn NOKIA 5300 XpressMusic and dont know who changed the security code. Now I m getting 1dum tension, please help me. None of the following gets me off the problem: I need a security code to switch off to switch ON/to enter
-
How do I get my wirelss back? It's greyed out
I am trying to get my wireless servcie back after upgradeing to 6.0. I have upgraded to 6.1.1 and still hasnt fixed this. I have tried resetting netowrk settings on phone, router etc. Nothing works. Wireless remains greyed out?
-
WebI error when running against SAP BW
Hi all, I run a WebI query against BW 7 (XI3.0) and it display the following errors: MDDataSetBW.GetCellData No more storage space available for extending an internal table. (WIS 10901) To me it seems like a database resources issue. So how can w
-
Reading/processing file -- only once!
Hi, I am working on a requirement that i have to open/read and process files that are continously created in one of the directories. Now i understand that i will have to make sure that the program does not process any file more than once. These files
-
Change Layout for Document Access Right
Dear SAP B1 dev. team and management, I have read the LICENSE COMPARISON CHART in the following link: https://websmp206.sap-ag.de/~sapidb/011000358700000953982007E I find that there is a confusing functionality in the sales A/R. It is change layout f