How to configurate SFTP adapter

Hi, good morning,
I am currently setting up a communication channel SFTP, which will process multiple files configured in the list "Additional File".
When I analyze the communication channel in the "Run Time WorkBench" this is the result:
Picture - Communication channel
I searched what should be the syntax or configuration of the "Additional File" in SFTP adapter but i don't find it. This is my configuration:
Picture - Communication channel_configuration
On the other hand, I compare FTP Additional file with SFTP but It isn't the same.
Could you help me set it up properly?
Thank you very much.

Hi Eng,
I need to put "*" because the right part of the filename (after the point) could change.
For example i can recieve:
XETEX19E.ddaseaggge or XETEX19E.ddaseaggda or XETEX19E.ddadd and other.
Can i put * in the namePart definition? For example:
"19E.*"="34E.*"
Picture - NewOption
When I try it I obtain this error:
Picture - Other
Do i need to know the exact FileName?
Thanks.
Regards.

Similar Messages

  • How to configure SFTP Adapter in XI?

    Hi All,
    How to configure SFTP adapter in XI?, It would be great if anyone sends a step-by-step documentation on the same.
    Thanks in advance

    Hi,
    About SFTP .
    1) SFTP (Secure File Transfer Protocol)
    "SSH File Transfer Protocol" or SFTP is a network protocol that provides file transfer and manipulation functionality over any reliable data stream. It is typically used with the SSH-2 protocol to provide secure file transfer. SFTP encrypts the session, preventing the casual detection of username, password or anything that is being transmitted. One key benefit to SFTP is its ability to handle multiple secure file transfers over a single encrypted pipe. By using a single encrypted pipe, there are fewer holes in the corporate firewall.
    SFTP:
    As per the latest SAP PI/XI support pack, it does not support SFTP via File Adapter.
    So alternative approach to cater this requirement from XI is to make use of Unix Script at OS level to transfer the files from/to third-party systems.
    Inbound Interface - i.e. third-party system ->XI->SAP: 
    File is transferred to a folder in SAP XI landscape from the third-party legacy system using UNIX Script with secured protocol. Once the file is ready in the XI landscape, File Adapter will poll this directory and file is picked up by NFS protocol.
    Outbound Interface – i.e. SAP->XI->third-party system: 
    XI is responsible for writing a file into a folder in the XI landscape. These files are transferred to the third-party system by executing UNIX scripts with secured protocol i.e. via sFTP.
    Pre-Requisites: 
    Public key should be exchanged between external systems and the PI system.
    UNIX shell script has to be developed and scheduled.
    Advantages: 
    Highly Secured.
    Ability to handle multiple secure file transfers over a single encrypted pipe .By using a single encrypted pipe, there are fewer holes in the corporate firewall.
    Disadvantages:
    Two-Step process i.e. XI>Temporary folder>External System and vice-versa
    Files have to be temporarily stored in XI server.
    Multiple failure points i.e. XI and Unix script execution
    Maintenance of an external UNIX script.
    Difficulty in monitoring the execution of the shell script as it cannot be monitored thru XI.
    Need to generate keys and install it in the SFTP site as a pre-requisite i.e. SFTP clients must install keys on the server.
    SFTP uses keys rather than certificates. This means that it can't take advantage of the "chains of trust" paradigm facilitated through Certificate Authorities.
    Files from the XI server should be deleted/archived in a periodic manner to increase the disc space so that it will increase the performance.
    Note: UNIX shell Script can be executed as a background job ‘or' can be triggered from SAP XI through OS command at File adapter level.
    Check the links.
    Secure FTP (SSH) with the FTP Adapter
    Secured File Transfer using SAP XI
    Secure FTP in SAP XI
    Regards,
    Phani
    Reward points if Helpful

  • SFTP adapter Configuration help:

    Dear All,
    I am trying to configure SFTP (seeburger) in sap PI.
    I want to know how to connect SFTP adapter of seeburger with an SSH sever. (I have installed free SSH Server in my laptop).
    How to connect using SFTP SETTING as
    AUTHENTICAION Method: Private Key authorisation
    how to generate/use private key.
    Please Advice,
    Prakash
    Edited by: senthilprakash selvaraj on Jan 20, 2010 6:42 AM

    Dear All,
    I have installed SSH server and genreated the RSA key in Visual admin and i have configured the SFTP adater properly.
    Now i have a different issue.
    In Communication channel monitoring once i start the channel(SFTP) i am not getting any message. Its just saying Channel started and thats it. nothin else is coming.  not even throwing any error. what should i do. why its happing like that.
    I Tried with Authentication mode as Private Key as well as Password. in both configurations are proper.
    also i tried refreshing the cache..no use.
    Please help,
    Senthilprakash

  • How to file mask in sender seeburger SFTP adapter

    Hello Gurus,
    Please help on
    How to perform a file mask in sender seeburger SFTP adapter? eg. I want to pick all the files but not *.tmp files.
    thanks
    Kishore

    Kishore
    A work around:
    Use another interface File to file (By pass) using file adapter which does the mask exclusion of the file which are not required.
    Regards
    Raj

  • How to handle empty file using sftp adapter

    Hi,
    Please explain me how to handle empty files in sftp adapter.
    Thanks,
    Enivass

    Hi Enivaas,
                        I don't have the seeburger sftp adapter at hand at the moment, but asfar as I remember, this does not specifically have an empty-file handling option like the standard ftp adapter.
    So to stop emtyp files from being written, guess would need to handle this at the mapping level. For example, check for target creation criteria in the header node in mapping. If the creation criteria is not met, you can throw an error in mapping.
    You may also incorporate this condition in your Receiver determination. In this case, if the condition is not satisfied, no receiver is determined in PI.
    Regards

  • How to do FCC with SFTP adapter (BIC MD tool)

    Dear All,
    Hi guys...can anyone tell how to do FCC with SFTP adapter (Seeburger).
    Can BIC MD tool do the FCC required. can anyone provide link which tells steps to perform FCC with BIC MD.
    we know that we can use the standard module for it. but we are trying to explore this BIC MD and its limitations.
    Regards,
    Senthilprakash

    Hi,
    Im closing this thread as its open for long time now.
    well i have even found the solution for the same.
    SFTP adapter as such does not have FCC functionality.
    we have to use SAP Modules for performing FCC in SFTP adapter.
    for complex conversions (more than 3 levels) we can use BIC tool and then deploy the module in our adapter.
    Regards,
    Senthilprakash.

  • Dynamic filename creation with Seeburger's SFTP adapter

    Hi Experts,
    I read in one of the forum that Seeburger's SFTP adapter supports dynamic configuration.
    My requirement is i need to dynamically create a file name and put it into a predefined folder(of a third party system) with SFTP adapter.
    Can any one help me with some blogs/Materials on this?
    Thanks,
    Niranjan

    HI,
    Have you look into the blogs mentioned in below forum
    How do we do File content conversion using SFTP SEEBURGER Adapter
    Thanks
    Swarup

  • Need to read source file without deleting it - Sender SFTP adapter

    Dear friends,
    The data from the source file needs to be read by PI on a daily basis. The file should not be deleted.
    Vendor  updates the file on a daily basis with file name DataFeed.xml
    How to acheive this in Sender SFTP adapter ?
    Kindly guide me
    Renu

    Hi Renu,
    Unfortunately as of latest release of SFTP adapter. Arching is not possible :(. really dont know why :).
    as a work around what you can do is  create a scenario as 1 sender and 2 reicever.
    here: 1 sender: will be the sender fileadapter which will pick the file from souce.
             1st receiver: will be a receiver file channel which will palce back the file in the source Archive folder.
             2ed Receiver: this will be the actual receiver to which the data has to be given.
    Or write a Module in Sender adapter which will archive the files in new location.
    Note: Here i am assuming that each time the source creates a new file with same name which contains new data in it everytime.
    Regards,
    Senthilprakash.

  • Picking file in sequence/Queuing   in  sender SFTP adapter.

    Hi Experts,
    I am using SFTP adapter in sender side, it has no option of quality of service ( EOIO)  and queue name as we have in  FTP adapter configuration .Is there any  predefined  module provided by Sap which i use in the modules Tab in communication channel configuration to get the functionality of queuing ? just like we use  strictXMlto plain bean etc.
    I have 3 files which needs to  proccess in a sequence one after another in order.I CANT USE BPM or Even FTP because of Security reasons.
    please share you ideas.
    Regards,
    Anika

    Hi all,
    I have tried using AF_Modules/DynamicConfigurationBean in module tab present is the sender SFTP adapter with the attribute qualityOfService.
      parameter name                  Parameter value
         key.0                         insert http://sap.com/xi/XI/System/Messaging  qualityOfService
        value.0                        ExactlyOnceInOrder
    But in Moni i dont see the 3 messages didnt go in the same queue.But when i double click and open the dynamic configuration present in the soap header section i can see the values which i given in the module parameter.
    Is there any way i can change the quality of service to EOIO at runtime ? how to change the default EO to EOIO.
    Regards,
    Anika

  • Handling empty files Using SFTP adapter

    Hi folks,
    Can any please let me know how to handle empty file handling in SFTP adapter as a sender.
    I getting error in sxmb_moni while empty file coming in sftp adapter. Please help me on this issue.
    Thanks,
    Enivass

    Hi,
    please select option "Empty file Handling-*do not create Message*" in sender comm channel as per your requirement.
    Try this.
    Reg

  • Flat file to XML in SAP SFTP adapter

    Hello All
    I am trying to convert flat file to xml using SAP SFTP adapter.
    Flat File is like below:
    AABEN;20141106;20141106;45;0.00
    AABOL;20141106;20141106;45;0.00
    ABGRI;20141106;20141106;45;0.00
    ADDEA;20141106;20141106;45;0.00
    ALADA;20141106;20141106;45;58.43
    AMSCH;20141106;20141106;45;0.00
    ANOLV;20141106;20141106;45;0.00
    ANROY;20141106;20141106;45;0.00
    AVMCD;20141106;20141106;45;0.00
    Message Type structure I created like below
    In Server SFTP adapter in Module tab I am using "AF_Modules/MessageTransformBean" and conversion type ="StructPlain2XML"
    I am getting error = "Error: com.sap.aii.af.sdk.xi.adapter.trans.TransformException: Transformer Conversion3.0.5226 Error initializing Class: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found (4408) Parameter 'xml.keyFieldName' is missing (4403) Parameter 'xml.keyFieldType' is missing (4403) ; nested exception caused by: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found (4408) Parameter 'xml.keyFieldName' is missing (4403) Parameter 'xml.keyFieldType' is missing (4403) "
    I am not using any key field then please let me know how to overcome this issue.
    I searched on SDN but did not get any perfect answer.
    Thanks
    Dheeraj Kumar

    Hello Dheeraj,
    Thanks for your reply. I created a new discussion,
    Flatfile to XML
    Thanks well in advance for your help!
    -Satish.

  • Seeburger SFTP adapter

    Hi
    I want to transfer the file from one location to another locatoin through Seeburger SFTP adapter, is it possible?, If yes could you please suggest how to do and provide any documents/links.
    By using File adapter we can send the data
    /people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
    Like this i want to send the data through SFTP.
    Thanks
    Ramesh

    I had a same question long time back.
    The way to do this is - Exchange the server keys ( Your admin can generate it)
    Install the keys ( server keys ) from the target system in your source server ( where you have SFTP adapter installed). If you have user id and password you can choose in the drop down of the SFTP adapter.
    Yes, FIle adapter is configured to pick the file and virual receiver.
    Another pointer was - there are some fields which are mandatory like mapping where you can use DUMMY.
    To send to the target - configure the receiver adapter.
    Make sure your fire wall is open for the port needed for SFTP.
    -Sanju

  • WCF-SAP vs SFTP Adapter

    Hi All,
    We've an existing interface that picks up IDocs from SAP using WCF-SAP adapter, these IDocs contain updates to data that are in turn subscribed by two other SAP systems via couple of Send Ports using the same WCF-SAP adapter. In production we've been facing
    performance issues with this design as when there are mass updates in SAP, they push up to 7 to 10K IDocs through, which BizTalk struggles with and that also creates issues for SAP as the queue is not read in quick time which starts building up and creates
    issues on the source system.
    Now one of the solution proposed for above problem is to use a file based adapter like FILE, SFTP etc. where SAP will publish IDocs as flat files, I believe that'll solve the problem of backlog building on SAP queue and SAP can continue to write files without
    impacting by BizTalk not picking them up but would it help in inside BizTalk performance as well? or we'll have to batch the files in using adapter properties (i think it works on SFTP adapter) say take in 100 files every 30 seconds? Any other solution which
    can speed this up?
    Thanks
    Syed

    I was just reading this
    Restrict the number files Picked up by BizTalk FTP Adapter msdn
    thread and it says
    "Not possible, the Maximum Files setting only controls how BizTalk creates the message batch
    to write them into SQL.  This also applies to the File adapters Number of messages in a batch"
    So , you need to implement some kind of controller pattern in your solution to manage this floodgate. 
    Have a read of
    How to implement Concurrent FIFO Processing in BizTalk technet wiki article, this for FIFO but this may give some idea to write a controller.
    Greetings,HTH
    Naushad Alam
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or
    Mark As Answer
    alamnaushad.wordpress.com

  • BizTalkServer 2010 SFTP Adapter from CodePlex - Configuring send and receive locations with SSH public and private keys

    Hi there,
    I am looking for step by step instrcutions on how to configure SFTP Codeplex adapter for both receive and send ports.
    Out business partner with whom we push/poll the files from wants us to use SSH encryption/decryption etc.
    Just wondering if the following functionality is supported in Codeplex SFTP adatper without having to write any code.
    Appreciate if there is manaul to do this for SFTP. BTW I do have all the our public and private keys and business partners Public key for configuring.
    For Send port: 1. we would need to encrypt the file with our business partners public key
                          2. sign the file with our private key.
                          3. Send the file through to SSH client which eventually transfers to Remote server.
    Receive port:   1. Connect to SSH Server with SSH-2 key and receive the file
                          2. Verify the file's digital signature agaisnt the Business partners PGP public key
                          3. Decrypt the file using our PGP Public key
    Thanks in advance

    Yes it is supported.
    You can find its documentation in this link 
    You can find section X.509 Certificate Identity Keys
    You can set public and private key in property SSH Identity thumbprint  of send and receive port
    I prefer to test it using client tool like
    FileZilla or WinSCP then test it using sftp adapter
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

  • BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files

    Hello, 
    We have a requirement to connect SFTP secure site with the private key and polling files.   Initially I have
    tested BizTalk Server 2013 SFTP Adapter receiver Port using  Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
    However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
    did not poll any files from SFTP Site.  I added only one file to SFTP Server ( 145 kb file) for testing purpose.
    However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
    I could not find any errors in Event viewer also.  I can download\upload file using WinSCP tool .
    So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter  is also working find
    without any issues for Client SFTP Site.
     This is the configuration on SFTP Receive Adapter
    This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool. 
    <o:p></o:p>
    Appreciate your help on this.<o:p></o:p>
    Thanks<o:p></o:p>
    PrabathD<o:p></o:p>

    BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
    The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
    submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
    Set your poll interval to a non-zero value and check the behavior.
    Regards.

Maybe you are looking for