How to Configure CUA of SAP R/3 system to Portal System.?

Hi,
can you please explain how to configure CUA of R/3 to UME of Portal

Srikanth,
It depends how is your landscape desigend befor you proceed with CUA, there are many points which you have to consider. refer these liknk.
http://help.sap.com/saphelp_nw2004s/helpdata/en/3b/68ff407765ed6fe10000000a1550b0/frameset.htm
Cheers,
Shaym

Similar Messages

How to find out where sap error messages stored in our system

How to find out where sap error messages stored in our system.like sometime we will get a error message with message number.whr it will be stored and whch table it is?

Are you interested in WDA messages ?
The set a breakpoint in METHODS IN class CL_WDR_MESSAGE_MANAGER.
Then use call stack (default desktop 2 in debugger) to see where message is added to message manager.
regards
phil

How to configure to use Strut 1.2 in weblogic portal 10.3.2

I am new in weblogic portal, now i need to develop Strut portlet version 1.2. But I don't know how to configure it in weblogic 10.3.2 and i can't find document for how to configure Strut 1.2 to work on weblogic portal 10.3.2. I added relation libraries and configure like in weblogic document of oracle. But it's can not run and throw some exceptions like : can not render jsp file. Someone can tell me how to configure Strut 1.2 to develop Strut portlet ? Thanks in advance!

This would be a good place to start:
http://download.oracle.com/docs/cd/E15919_01/wlp.1032/e14243/integrate.htm#BABBEHCH
Brad

How to configure oracle to SAP NETWEAVER DEVELOPER STUDIO STEP RAGARDING

hi
can u help me on this
i got problem
regarding configuring oracle to sap NetWeaver developer studio what i have deployed any thing studio
that would reflected to database
bye

Hi,
Check this,
WebDynpro and Oracle Connection
WebDynpro and Oracle Connection
Regards,
Vijayakhanna Raman

Steps to configure BI system to portal system

Hi Everyone,
I am new to Portals. Can anybody tell me the steps invloved in configuring BI system to Portal. I want to publish the BEx Reports into portal. I am not able to understand, though I had collected information and files regarding it.
Thanks in Advance,
Jayasree

Hello Jayasree,
1. Navigate to System Admin-> System Config -> System Landscape -> Portal Content
2. Select a folder in which you want to create the BI reference system
3. Right click -> New -> System. Select a dedicated system
4. Please read more on this link: http://help.sap.com/saphelp_nw04/helpdata/en/ec/0fe43d19734b5ae10000000a11405a/frameset.htm
Also send me a test email (check my business card for it) & ill send you a snapshot document on the above.
5. After system creation, you need to create a Web Report iView, put in the BEx report URL
Connection between Portal and BI complete.
Regards,
Ritu

How to configure alerts in SAP R/3 System.

Hi,
We have R/3 system installed in our system.Now i want configure alerts to display for users.How can i configure alerts in that R/3 System.Send me the realted information and links.
Regards,
Kiran.

Hi Bhogi,
The Alerts in SAP XI can be raised for error happening in:
1. Adapter Engine
2. Integration Engine.
1. These Alerts are system generated in case anything happens in either of the component.
For this you need to:
1. Create ALert Category in the Trnasaction ALRTCATDEF
2. Create Alert rules in Runtime Workbench--> ALert Configuration and associating these rules to Alert category.
If you want you can do it without a BPM
and throw an exception in case any of the values is missing:
have a look at this weblog on how to throw exceptions
in a nice way:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Also just go through Raising Exceptions in SAP XI Mapping and see if it helps you solve the problem.
Also go through these links:
Forwarding Alerts to Alert Management (ALM)
Alert Management
XI: Alerts - Step by step
XI: Alerts - Troubleshooting guide
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
For a Simple case with BPM refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
To send an EMAIL, assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered..
Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
I hope it helps.....
Reward points if this helps
Regards
Vani.

How to configure JAAS in SAP Web AS 6.40

Hi to all,
We are migrating from IBM Websphere to SAP Web AS6.40
The application on websphere uses JAAS for authentication of User.
1. It has custom login module as follows:
public class UPServiceLoginModule implements LoginModule
2. The information about Login Configuration is mentioned in file Websphere's wsjass.config file.
MyLoginModule
 com.mypackage.auth.UPServiceLoginModule
 required
 debug="true"
 serviceName="SecurityService";
My question is how can we do this JAAS settings on SAP Web AS?
I have read all the documents on SAP Library regarding developing Custom LoginModules, making its library and registring it on J2EE engine and then referring it in application.
But we don't want our Login module to extend the Class AbstractLoginModule provided by SAP.

check
http://service.sap.com/instguides
Thanks
Prince Jose

How to configure IIS for SAP BO 4.0 - installed in different server?

I have installed:
Server Nr1 SAP BusinessObjects BI-Platform 4.0 in a 64 Bit Version and Server Nr2. IIS also 64 Bit Version.
(BO and IIS are not running in the same Server)
I have no idea to configure IIS. Can someone of you tell me the steps that are to do ?
Thanks a lot.
Regards

Hi Qamile,
You can't. IIS is only for integration with Sharepoint portal server. Check the supported platforms guide. Only Java web application servers are supported.
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/10ccbdf2-139f-2e10-61a0-d4af67b6257b
Regards,
Julian

How to configure SOAMANGER in SAP

Hi Friends ,
I am want to call external services from SAP. To achieve this I have to configure using transaction SOAMANAGER.
When I run this transaction I am getting an error message .
This page can’t be displayed
Make sure the web address http://pl1pa273.corio.com:8000 is correct.
Look for the page with your search engine.
Refresh the page in a few minutes.
Please help to fix this error

It seems you dont have visibility to that URL or you can't resolve the DNS (the name of the domain)
In your host file:
C:\Windows\System32\drivers\etc\hosts
Add and entry with the IP of the url (IP number of the server check it in the SAP LOGON) following by the domain and save it.
http://pl1pa273.corio.com:8000
assuming 201.242.10.123 is the IP address:
201.242.10.123 plpa273.corio.com
If this doesn't work, check if you have any proxy configurated, this is not an ABAP issue is IT.
Regards

How to configure PA48 for hiring/rehiring from third party applicant system

Hi,
We are building the interface between SAP and third party applicant system. There is no ALE/RFC possible, so we will develop a ABAP program to fill the interface table T752F from a XML file from the vendor system. We would like to use transaction PA48 for performing hiring transaction.
Question:
1. We need to use 3 differnt action types depending on whether it is external candidate/Internal candidate or re-hiring. How to default the correct action type? What are the configuration steps?
Would appreciate if anyone could share some documenation on the whole data transfer process.
Appreciate your quick reply.
Thanks,
Jaya

Hi Danish,
Yes, you can supply HR action type in the in the interface (T752f-massn), which will be defaulted when you run the hire action from PA48 screen.
Hope this is helpful.
Jaya

How to Configure a oracle R12 with RAC on two different system .

I have one laptop and one desktop
Laptop----
on laptop I have install vmware 8
Host OS --win7
Guest OS---linux 4
Desktop ---
On Desktop I have install Vmware 8
Hosts OS --- Win XP
Guest OS ---Linux 4
Plz suggest How configure oracle R12 with RAC using both system .

Hussein Sawwan wrote:
on laptop I have install vmware 8
Host OS --win7
Guest OS---linux 4
Desktop ---
On Desktop I have install Vmware 8
Hosts OS --- Win XP
Guest OS ---Linux 4
Plz suggest How configure oracle R12 with RAC using both system .If you want to configure RAC, then you must have the same OS installed on all RAC nodes -- See (RAC: Frequently Asked Questions [ID 220970.1], Does Oracle Clusterware or Oracle Real Application Clusters support heterogeneous platforms?) for details.
Once you have the same OS, please refer to:
Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]
Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
Thanks,
HusseinHi Hussein,
For Rac I am using both same OS (linux 4) for both nodes .
Plz suggest its possible to install two nodes on different machine(diiferent virtual machine on different system ) .Can communicate both machine without any problem if its possible plz provide links.

How to configure sync rules involving a CSV file and portal self service

Hello,
I need to configure some FIM sync rules for the following scenario:
User account details are entered from a HR CSV file and exported to AD Users have the ability to modify their own AD attributes in the
FIM portal (there is not a requirement for them to view their HR CSV data in the portal). The FIM portal modifications will be exported to AD as expected.
My setup is as follows:
CSV file - name, last name, employee ID, address.
CSV MA - has direct attribute flows configured in the MA between the data source and MV Portal self service attributes –
users can edit mobile, display name and photo
I've also set the CSV MA as precedent for the attributes
FIM MA – attribute flows defined for MV to Data Source as usual (i.e. firstname to firstname, accountname to accountname, etc).
AD MA – no attribute flows defined as inbound and outbound sync rules have been configured in the portal using the Set\MPR\Triple.
I’m thinking of using the following run profiles:
CSV MA – full import and delta sync (imports HR data)
FIM MA – export and delta import (imports portal changes)
FIM MA – delta sync (syncs any portal changes)
AD MA – export and delta import
If my understanding is correct this should sync HR data from CSV to AD, as well as user attribute self service updates from the portal to AD.
If I wanted to just do a HR CSV sync could I get away with just steps 1 & 4 ? (presumably not as my rules are in the FIM portal?)
If I wanted to do just a portal sync, could I get away steps 2-4?
Any advice on how to improve my setup is much appreciated - cheers
IT Support/Everything

The truth is that your design should be done in the way that it doesn't matter which profiles in which order you will execute. At the end, if you will run all import, synch and export profiles on each data source you should get same result. This is beauty
of synch engine here.
Your steps from 1-4 will synch data to your data sources and at the end will give you expected result. But not because of the order you are executing them but because of correct attribute flows. If flows from CSV file and from FIM portal might be done for
the same attributes you need to think also about attribute precedence.
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

How to configure SunCluster 3.1 8/05 with Network File System

Hi Gurus,
does anyone has experience to configure SC3.1 8/05 using nas as cluster filesystems?
I've found this document in docs.sun.com:
Installing and Maintaining Network Appliance Network-Attached Storage Devices in a Sun Cluster Environment
This document explain how to use scnas and scnasdir commands, how to use netapp as quorum device.
It seems incomplete, after I configure netapp in cluster what I need to do to register netapp filesystems in the resource group?
Thx,
Antonio

Please see SUNW.ScalMountPoint
http://docs.sun.com/app/docs/doc/819-2981/6n58037vt?l=fr&a=view&q=network+appliance+file+system+ressource+group
Regards,
Laurent

How to configure https to send wsdl file to third party systems

Hi Experts,
instead of using http, i need to use https. so for this in xi system what steps do i need to follow to send wsdl file to any third party systems. here iam using pi 7.1 as a xi system.
please help me in this.
thanks
jas

>> to send wsdl file to any third party
In no communication you send wsdl to third party. You always send related http message.
For HTTPS, in the receiver channel, use HTTP Destination.
Goto sm59 in PI and create RFC destination type G. There under "Logon & Security", set SSL as Active.
For this to work, certificates should be imported on ABAP stack using STRUST.
Regards,
Prateek

How to configure ePrint on LaserJet CP1025nw Color Printer

Solution found:
How to Configure HP ePrint on the LaserJet CP1025nw Color Printer
System: Windows (Widows 7)
Step 1 – Install Printer
Install the CP1025nw Printer to USB, Wifi or Ethernet.
(Printer needs to print correctly in order to pass to the next steps).
Step2 – Check Firmware Version
Press the “Info-Button” on the CP1025nw LaserJet for five seconds.
The printer will print two info pages.
Look at the first Page on the top-left for Firmware Version
Firmware version must be 20120103 or higher.
Step 3 – Update Firmware
Download Firmware Update utility (LJCP1020_FWUpdate_signed.exe) from the following link:
Utilidad de actualización del firmware de HP LaserJet CP1025nw
or
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-5&cc=es&dlc=es&lc=es&...=
Execute the Utility on the computer were the CP1025nw LaserJet is correctly installed.
Find the CP1025nw Printer on the list. The selection Window might show the printer several times depending on how the printer was installed. Select one option and press the button “Update One”.
Step 4 – Retrieve the Printer Code for your CP1025nw Printer
ATTENTION:
The “Host Name” of the printer is not the “Printer-Code” you need for ePrint setup.
To retrieve the Printer-Code you must run the ePrint-Setup-Wizard-Utility.
To download of the utility, go to the link: http://www.hp.com/go/ePrint .
Find the “HP LaserJet Pro CP1020 Color Printer Series” option in the Drop-Down-List.
Click “Windows” to download the wizard (EPrintSetupWizard.exe ).
Execute the Wizard on the computer where the CP1025nw Printer is correctly installed. After running the wizard press the “Info-Button” on the CP1025nw LaserJet for five seconds. The printer will print three info pages. The third info-page offers the Printer-Code you need for ePrint setup. The code is valid for 24h only. When time elapses you have to reprint the info-pages to get an actualized Printer-Code.
Step 5 – Get Printer Email for your CP1025nw LaserJet
In order ePrint on your CP1025nw Printer you need to assign an email address to your Printer. To do this, go to the following link: http://www.hpeprintcenter.com/
Log in with your HP-ID. If you don’t have one, register for a new account.
When logged in, click on “Add new Printer”-button. You will be asked to enter the Printer-Code. (On how to get the Printer-Code, see step 4).
While evaluating the Printer-Code, be patient, the program needs its time.
When the Printer-Code is accepted, you can assign an email address for your CP102nw5 LaserJet. Done this, your con print your CP1025nw Printer just by sending the documents per email to the email-address of your printer.
Done.

Hi Max, check out the link below...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4052972
Hope this helps
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

How to Configure CUA of SAP R/3 system to Portal System.?

Similar Messages

Maybe you are looking for