How to configure eec 6.0 to CRM 7.0

Hi Gurus,
Could anyone give a step by step procedure to configure ECC 6.0 to CRM 7.0. At present both these are not connected. I need to establish a connection between them. I need this information at the earliest please.
Divi

Hello Hari,
I believe this question should be answered by a CRM expertise, not an UPG one
Please ask the forum admin/moderator if it's possible to move the topic to CRM forum, or open a new topic there.
Best regards,
Tomas Black

Similar Messages

How to Configure Table Graphics in SAP CRM 7.0

Dear all,
What is the main use of Table Graphics and How can we configure table graphics functionality in SAP CRM 7.0.
Kindly suggest in case any best practice documentation or other configuration document is available
Your help will be highly appreciated
Best regards
Raghu ram

Hello Devi,
There are three ways you can load Master Data in BPC
1) Copy and paste.
Download master data in flat file .Copy the master data and paste in members of dimension after that process the dimension.
2) Using SISS Pakage - load Flat File into BPC-Cube
3) Using SQL Command.
Thanks.
With regards,
Anand Kumar

How to Configure and Integrate EP with CRM

Hi Everybody,
I want to integrate EP with CRM.
I am using SAP WAS Server.I have installed Portal.
I downloaded CRM Business packages.
1)How to integrate and configure in the EP with SAP R/3(CRM Module).
2)What are the prerequisities.
Plaese prove the exact help and documents.

Hello,
I think this <a href="http://help.sap.com/bp_epv260/EP_EN/documentation/EP/N12_Scen_InstallGuide_EN_US.doc">Scenario Installation Guide</a> from the <a href="http://help.sap.com/bp_epv260/EP_EN/index.htm">SAP Best Practices for Enterprise Portal V2.60</a> can help you.
Regards
Gregor

How to configure IC winclient alert modeler - CRM 5.0

We are wanting to assign a marketing attribute against certain customers, to have them flagged within CIC0 that any incoming calls from them need to be forwarded to one particular person within our organisation. The alert modeler would work well for this, where it would display an alert on these certain customers.
I have figured out most of how to do this, in terms of components to turn on in IMG. However, I want the Alert Modeler Editor to pick up a marketing attribute I have defined (I have set a profile to retrieve the marketing attribute already - using tx CRMC_CIC_BP_PROFILE), and have it display either the text held against the attribute (have set the att as a chara), or else pick up a name held against the attribute and display set text - as an example "All calls are to be forwarded to <name>" where <name> is held against the marketing attribute set. Can anyone assist with this part? At present, in CIC0 I have now displaying the name of the customer in the Call processing area (we don't use this for call processing). I don't want the name to display, I want the above text instead.
I think i need to set some rules in the rule modeler itself, but am not sure how to do this - sample code would be greatly appreciated as well!
Thanks in advance

Hi Cara,
In order to make use of the Marketing attributes in CIC Alert Modeler, please make sure the following customizing entires are maintained properly:
1) You need to first create the attributes using the transaction 'crmd_prof_char'.
Just create an attribute(say for eg., BP_MAIN) with some description, format and Number of chanracters and then save the attribute.
2) Now, create a profile template (attribute set) using the transaction 'crmd_prof_templ'.
Just create an attribute(say for eg., BP_MAIN_SET) with some description, authorization, etc., and once
this is done, you need to assign the attribute just got created in step 1 and then save the attribute set.
3) Assign this attribute set(profile template) which got created in step 2 to a Business partner(for which the marketting attributes are to be set) using the transaction 'crmd_prof_bp' and maintain his attribute values.
4) Create target groups and assign business partner:
Using the transaction 'crmd_mktseg', you can create the Target Group as follows:
-> Right mouse click in the top right field and choose 'Create Profile Set'.
-> In the Popup, just give some description and then click on the green check mark.
-> Now right mouse click in the top right field 'create target group' -> Right mouse click on the new group, goto the properties and then provide some description of the target group.
-> Right mouse click on the new group, and choose Open target group.
-> Add business partner to the target group with button 'Add'.
5) In transaction CRMC_CIC_BP_PROFILE, maintain your own 'Retrieval Profile'.
-> Decide if the data should be read asynchronously
-> Decide if the target groups should be read
-> Decide which profile templates should be read (insert your own created attribute set via F4)
-> Decide which BW key figures should be read (optional).
6) Change your CIC Profile and insert the following Profile Categories apart from the Alert Modeler Profile(ALRT_MODLRX):
-> COMPANY_PROF = your newly created business partner retrieval profile
-> CONTACT_PROF = your newly created business partner retrieval profile
7) Change your CIC Framework ID and insert the following Components as part of the Hidden Components:
COMPANY_PROF
CONTACT_PROF
Please follow the above mentioned steps in accordance with your own BP Marketing attribute and I hope this way will fetch the value of the Marketing attribute of the respective BP during confirmation in CIC, with which the Alert Message can be triggered.
Hope this information helps !
With Best Regards,
Vinod

How to Configure PME in CRM 7

Team,
Greetings for the day..
could any one please provide some lights on "how to configuring PME in CRM 7".
currently we have installed CRM7 IDES (ABAP / JAVA stacks in 2 different instances under single Host).and need to configure PME.
CRM functional team trying to configure PRODUCT and its giving "PME installation with Errors".
Please help in this regard.
Regards,
Nagarjuna Gorantla

Hi Naga,
Please check the following links...
http://help.sap.com/saphelp_crm60/helpdata/en/46/4a4296a9dc6a82e10000000a155369/content.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/540b2405a05e40e10000000a11466f/content.htm
As mentioned in the link PME was replaced with ebClient user interface...

How to configure for GPlus Adapter with SAP Phone and SAP CRM

Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
Govinda

Hi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen

How to I configure Tax functionality in SAP CRM 2007?

Dear Expert,
Kindly give me the idea of how to configure the Taxation functionality for India. This will be used to calculate the taxes applicable for Service Business.
Kindly give me some inputs to proceed further.
Awaiting your reply.
Thanks,
GJ

Object from external system is not showing the Calling system.
When i do the validate customizing check.
found that in TTE country assigned is U0. How to i change this?
when i try to assign the entries in object from external system. system not allow me to select the calling system only * symbol is coming. How do i fix this?
Check data transfer settting s give me the green result.
Expecting some one to throw me the some inputs to understand the technicality.
awaiting your input.
GJ
Edited by: GJ sap crm service on Mar 4, 2010 2:12 PM

How to configure Broadcast messaging for IC Webclient profile

Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ram

Hi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha

How to configure e-mail to forward to outlook 2007

I am looking for help in how to configure my Verizon.msn.com e-mail to forward to outlook 2007. Currently my e-mail is forwarded from Verizon to my msn e-mail address.

Do you make any effort to search for your answers before you post your questions? ERMS is the email response system
The 2nd post on this board - Documentation for Interaction Center (IC) WebClient
There is tons of stuff here to answer your questions as well as show you the configuration. You need a 3rd party CTI solution to do chat that you will read about in the blog.
SAP Notes
759923 Frequently Asked Questions about IC WebClient
940882 Frequently Asked Questions about ERMS
882653 Frequently Asked Questions about Agent Inbox
1114557 SAP CRM 2007 Internet Browser Releases
1118231 Supported user interfaces for SAP CRM
981710 Support for Microsoft Internet Explorer 7.0
1144511 Blank screen when starting CRM WebClient or IC WebClient
1115493 CRM Web UI: Mandatory SICF services for CRM framework
992848 Mandatory ICF nodes for CRM WebClient UI Framework
IC WebClient Consultant Cookbook for CRM 2005
Online Documentation
Online Knowledge Products
Blog: How to Configure Contact Center Simulator User Interface (CCSUI)
Blog: What is Computer Telephony Integration (CTI)

How to Configure E-mail and Chat functionalities

Dear all,
How to configure E-mail and Chat functionalities for IC Webclient.
through IC Webclient ICI interface how can we configure E-mail functionality, As per my understanding, E-mails can be handled in a similar way of receiving phones.
Where these E-mails can be stored?, Where we define agent E-mail id?
being ICI is a multi channel support does it need SMPT server support? If No, would there be any difference in the functionality?
How does CHAT functionality works?
Please educate in above scenarios to get a better understanding.
Your help will be highly appreciated.
Best wishes
Raghu ram

Do you make any effort to search for your answers before you post your questions? ERMS is the email response system
The 2nd post on this board - Documentation for Interaction Center (IC) WebClient
There is tons of stuff here to answer your questions as well as show you the configuration. You need a 3rd party CTI solution to do chat that you will read about in the blog.
SAP Notes
759923 Frequently Asked Questions about IC WebClient
940882 Frequently Asked Questions about ERMS
882653 Frequently Asked Questions about Agent Inbox
1114557 SAP CRM 2007 Internet Browser Releases
1118231 Supported user interfaces for SAP CRM
981710 Support for Microsoft Internet Explorer 7.0
1144511 Blank screen when starting CRM WebClient or IC WebClient
1115493 CRM Web UI: Mandatory SICF services for CRM framework
992848 Mandatory ICF nodes for CRM WebClient UI Framework
IC WebClient Consultant Cookbook for CRM 2005
Online Documentation
Online Knowledge Products
Blog: How to Configure Contact Center Simulator User Interface (CCSUI)
Blog: What is Computer Telephony Integration (CTI)

How to enable net value in sap crm opportunity

hello all ,
how to enable net value in sap crm opportunity and item category.
please help me out i am new in sap crm
Ahmad

Hi Ali,
Every transaction which you create have some predefined rule in the form of procedure which is attached in the transaction level. You can follow below path and check for the transaction which are the rule maintained.
CRM->Basic setting-> Define transaction types.
Search for your transaction type and double link in order to see all the rules attached to transaction level.
You also need to define which item categories you wanted to configure for particular transaction type which you all ready have done it seems.
You also need to define pricing procedure to the transaction where you need to checked for errors.
Below is the path
CRM->Basic setting-> Define transaction type-> open your transaction
step 2:click on assignment of business transaction categories than select category as Sales
than click on Customizing Header option to see attached pricing procedure with it.here you need to check for your error.
to check partner determination rule please follow below path in SPRO. -> partner determination procedure
Check in head of transaction which partner procedure is attached.
Than search for partner determination procedure in below path.
I hope this will help you to validate the setting for your transaction and will be helpful to solve your issue.
Thanks,
Prem

How to configure drop-down that change dynamically in Call Scripts

Hi,
Would like to know as how to configure drop-down choices that change dynamically based on customer response in Call Scripts / Assessment Scripts of type "Service Request - Survey".
I've read the following from CRM OnDemand pdf but was not able to figure out how to do that.
Call Scripting:
• Reduces agent training time
• Provides drop-down choices that change dynamically based on customer response
• Supports personalized interactions based on existing record data
• Facilitates up-selling and cross-selling
• Does not require third-party software
I don't have a concrete requirement as of now, but was trying to check as how it works. Please guide me if any one has implemented the same.
Thanks in Advance,
Cheers!!!
Deepak Veeravalli.

Arun,
If you plan to implement the "Querying the Active Directory" based on my code snippet,
and if you do not have permission [your account must be the part of domain admin] to do so,
Then still you can do it in least effort through code,
string usersInXml = SPContext.Current.Web.AllUsers.Xml;your xml string look like this.
<Users><User ID="2" Sid="" Name="Administrator"
LoginName="i:0#.w|murugesan\administrator" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1" Sid="" Name="Murugesa Pandian" LoginName="i:0#.w|murugesan\murugesan" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1073741823" Sid="S-1-0-0" Name="System Account" LoginName="SHAREPOINT\system" Email="" Notes="" IsSiteAdmin="False" IsDomainGroup="False" Flags="0" /></Users>
You can user Linq to XML to filter the "LoginName,Name and Email and then populate your drop down list.
* User must be logged into the site at least once.
Murugesa Pandian.,MCTS|App.Devleopment|Configure

How to Create Track in NWDI for CRM ISA 5.0

hi
can anyone please suggest me how to create track in NWDI for CRM ISA 5.0 for different archive files which consists of source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWEB.SCA, e.t.c.) and as well as empty source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWEB.SCA, e.t.c.).
As far as i know SAP does not deliver sources for SCs SAP-JEE,SAP_BUILDT and SAP_JTECHS so we cant have them as "Developed Software Components" when we eg:want to modify the SCs SAP-SHRAPP.SCA or CUSTCRMPRJ.SCA.
here what i want to know is depending on which SCs we actually want to modify, based on that our track want to be Configured differently.
My question is how to configure the Track in NWDI for this kind of scenario.
If the source is not given and only required software components are given then how to create track in NWDI. for example in CRM ISA 5.0
Regards,
Chandra.

SAP documentation is there in service market place for NWDI setup under netweaver. If you dont find document post your email id, I will send you the document.
regards,
Laxman

How to configure and install the IPC??

Hello All
I am working on CRM 7.0 with integration to ECC 6.0, I have variants for configurable products in the ERP and I want to use them in CRM orders so I have to use the IPC but I donu2019t know how to configure the IPC and is it to be installed on a separate server or it is just a tool to be activated on CRM or ECC system
Regards
Jacopo Francoise

Hi
You can refere this link, I believe it will help you alot.
[http://help.sap.com/saphelp_crm40/helpdata/en/1d/89b6dbf5c02a44af7b1ff8bfd48c35/frameset.htm]http://help.sap.com/saphelp_crm40/helpdata/en/1d/89b6dbf5c02a44af7b1ff8bfd48c35/frameset.htm
Regards
Naeem

How to configure oracle listener profile for multiple oracle database

Hi,
I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
I'd like to know how to configure listener in this kind of envirnmonent.
a. use two listener and different ports
b. use same listener but different ports
c. use same listener and same port
Which is the correct mothed?
And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
Please advise.
Thanks a lot.
Regards,
Alex

Hi,
standard installation is creating new configs for listener for each instance.
I would recommend to use one listener per each instance.
YOU CAN NOT HAVE one port number for two differnet systems!
If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
For example PORT= 15<system number>
Peter

How to configure eec 6.0 to CRM 7.0

Similar Messages

Maybe you are looking for