How to Configure PME in CRM 7

Team,
Greetings for the day..
could any one please provide some lights on "how to configuring PME in CRM 7".
currently we have installed CRM7 IDES (ABAP / JAVA stacks in 2 different instances under single Host).and need to configure PME.
CRM functional team trying to configure PRODUCT and its giving "PME installation with Errors".
Please help in this regard.
Regards,
Nagarjuna Gorantla

Hi Naga,
Please check the following links...
http://help.sap.com/saphelp_crm60/helpdata/en/46/4a4296a9dc6a82e10000000a155369/content.htm
http://help.sap.com/saphelp_crm60/helpdata/en/46/540b2405a05e40e10000000a11466f/content.htm
As mentioned in the link PME was replaced with ebClient user interface...

Similar Messages

How to configure for GPlus Adapter with SAP Phone and SAP CRM

Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
Govinda

Hi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen

How to configure Broadcast messaging for IC Webclient profile

Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ram

Hi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha

How to configure e-mail to forward to outlook 2007

I am looking for help in how to configure my Verizon.msn.com e-mail to forward to outlook 2007. Currently my e-mail is forwarded from Verizon to my msn e-mail address.

Do you make any effort to search for your answers before you post your questions? ERMS is the email response system
The 2nd post on this board - Documentation for Interaction Center (IC) WebClient
There is tons of stuff here to answer your questions as well as show you the configuration. You need a 3rd party CTI solution to do chat that you will read about in the blog.
SAP Notes
759923 Frequently Asked Questions about IC WebClient
940882 Frequently Asked Questions about ERMS
882653 Frequently Asked Questions about Agent Inbox
1114557 SAP CRM 2007 Internet Browser Releases
1118231 Supported user interfaces for SAP CRM
981710 Support for Microsoft Internet Explorer 7.0
1144511 Blank screen when starting CRM WebClient or IC WebClient
1115493 CRM Web UI: Mandatory SICF services for CRM framework
992848 Mandatory ICF nodes for CRM WebClient UI Framework
IC WebClient Consultant Cookbook for CRM 2005
Online Documentation
Online Knowledge Products
Blog: How to Configure Contact Center Simulator User Interface (CCSUI)
Blog: What is Computer Telephony Integration (CTI)

How to Configure E-mail and Chat functionalities

Dear all,
How to configure E-mail and Chat functionalities for IC Webclient.
through IC Webclient ICI interface how can we configure E-mail functionality, As per my understanding, E-mails can be handled in a similar way of receiving phones.
Where these E-mails can be stored?, Where we define agent E-mail id?
being ICI is a multi channel support does it need SMPT server support? If No, would there be any difference in the functionality?
How does CHAT functionality works?
Please educate in above scenarios to get a better understanding.
Your help will be highly appreciated.
Best wishes
Raghu ram

Do you make any effort to search for your answers before you post your questions? ERMS is the email response system
The 2nd post on this board - Documentation for Interaction Center (IC) WebClient
There is tons of stuff here to answer your questions as well as show you the configuration. You need a 3rd party CTI solution to do chat that you will read about in the blog.
SAP Notes
759923 Frequently Asked Questions about IC WebClient
940882 Frequently Asked Questions about ERMS
882653 Frequently Asked Questions about Agent Inbox
1114557 SAP CRM 2007 Internet Browser Releases
1118231 Supported user interfaces for SAP CRM
981710 Support for Microsoft Internet Explorer 7.0
1144511 Blank screen when starting CRM WebClient or IC WebClient
1115493 CRM Web UI: Mandatory SICF services for CRM framework
992848 Mandatory ICF nodes for CRM WebClient UI Framework
IC WebClient Consultant Cookbook for CRM 2005
Online Documentation
Online Knowledge Products
Blog: How to Configure Contact Center Simulator User Interface (CCSUI)
Blog: What is Computer Telephony Integration (CTI)

How to configure drop-down that change dynamically in Call Scripts

Hi,
Would like to know as how to configure drop-down choices that change dynamically based on customer response in Call Scripts / Assessment Scripts of type "Service Request - Survey".
I've read the following from CRM OnDemand pdf but was not able to figure out how to do that.
Call Scripting:
• Reduces agent training time
• Provides drop-down choices that change dynamically based on customer response
• Supports personalized interactions based on existing record data
• Facilitates up-selling and cross-selling
• Does not require third-party software
I don't have a concrete requirement as of now, but was trying to check as how it works. Please guide me if any one has implemented the same.
Thanks in Advance,
Cheers!!!
Deepak Veeravalli.

Arun,
If you plan to implement the "Querying the Active Directory" based on my code snippet,
and if you do not have permission [your account must be the part of domain admin] to do so,
Then still you can do it in least effort through code,
string usersInXml = SPContext.Current.Web.AllUsers.Xml;your xml string look like this.
<Users><User ID="2" Sid="" Name="Administrator"
LoginName="i:0#.w|murugesan\administrator" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1" Sid="" Name="Murugesa Pandian" LoginName="i:0#.w|murugesan\murugesan" Email="" Notes="" IsSiteAdmin="True" IsDomainGroup="False" Flags="0" /><User ID="1073741823" Sid="S-1-0-0" Name="System Account" LoginName="SHAREPOINT\system" Email="" Notes="" IsSiteAdmin="False" IsDomainGroup="False" Flags="0" /></Users>
You can user Linq to XML to filter the "LoginName,Name and Email and then populate your drop down list.
* User must be logged into the site at least once.
Murugesa Pandian.,MCTS|App.Devleopment|Configure

Configuration documents of CRM 2007 in Solution Manager

Hi all,
I have new version of CRM 2007 in our landscape and Solution manager as well.
So we need to get/download configuration documents of CRM 2007 by Solution manager but not sure what configuration we need to do in Solution manager to get these CRM documents.
So kindly suggest me the way to get this done, thanks.
Regards,
Himanshu chauhan.

Hi,
This link might not be sufficient but will let you know how powerful Solution Manager is.
http://www.sap.info/index.php4?ACTION=noframe&url=http://www.sap.info/public/INT/int/index/PrintEdition-17873d3e79f60eb30-int/0/articleContainer-214343d5145200a438
This link will be useful to you providing you how to create non SAP systems in your Solution Manager Landscape.
http://help.sap.com/saphelp_sm40/helpdata/en/bc/0e90000e58f64fb184a4cba0323e39/content.htm
This is one good guide for you.
www.sappro.com/downloads/NonSAPsystems.pdf
Meanwhile i will try for more indepth coverage of the subject.
Feel free to revert back.
--Ragu

How to configure and install the IPC??

Hello All
I am working on CRM 7.0 with integration to ECC 6.0, I have variants for configurable products in the ERP and I want to use them in CRM orders so I have to use the IPC but I donu2019t know how to configure the IPC and is it to be installed on a separate server or it is just a tool to be activated on CRM or ECC system
Regards
Jacopo Francoise

Hi
You can refere this link, I believe it will help you alot.
[http://help.sap.com/saphelp_crm40/helpdata/en/1d/89b6dbf5c02a44af7b1ff8bfd48c35/frameset.htm]http://help.sap.com/saphelp_crm40/helpdata/en/1d/89b6dbf5c02a44af7b1ff8bfd48c35/frameset.htm
Regards
Naeem

How to configure oracle listener profile for multiple oracle database

Hi,
I am going to install solution manager system in the same server of ERP EHP4 on Windows. Both DB are oracle.
I'd like to know how to configure listener in this kind of envirnmonent.
a. use two listener and different ports
b. use same listener but different ports
c. use same listener and same port
Which is the correct mothed?
And, after installation, there seem three set of profiles of listten, one for ERP, one for SLM, and the other for OS?(%windir%system32), which one is functional?
Please advise.
Thanks a lot.
Regards,
Alex

Hi,
standard installation is creating new configs for listener for each instance.
I would recommend to use one listener per each instance.
YOU CAN NOT HAVE one port number for two differnet systems!
If you want to use one listener than you must adapt tnsnames.ora, listener.ora and ensure that both systems will use different port numbers.
For example PORT= 15<system number>
Peter

How to configure one TREX host with multiple index servers ?

Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
Andres

Hi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

How to configure 3 different members under a single Month column

Hi SAP Gurus,
My client requirement is to show the report in following format, where under a Month column 3 different columns having
1) Quantity (Number of unit ) of a product,
2) its rate (Amount per unit), and
3) Total (amount)    will appear in a single report.
   I have Month as a Time Dim, while Qty, Rate and Total are members of account dim.
Que: How to configure such scenario in a single report?
Jan.2011
Product Category:            Qty (Input)   Rate (Input)   Total (Output)
Product 1
Product 2
Product 3
Product 4
Group1
     Where: Total = Qty X Rate
Thanks and Regards,
SouarbhD

Hi,
Use an EVDRE to create your input schedule. You need to have one row with products and 2 columns with time and account. Choose the memberset options as per the requirement. For the accounts, is total calculated with a dimension formula? If yes, then you just need to enter the values for quantity and rate and send the data. The total will be calculated by the system and will be displayed automatically.
Hope this helps.

How to configure an Alert message if communicationChannel(JMS) stops

All,
Is there a way how to configure an alert when the communication channel stops.
<b>Scenario:</b>
In the path Runtime workbench->Component Monitoring->Adapter Engine->Communication Channel monitoring, if we see that a communication channel has stopped(RED traffic light as Status), then can we trigger an alert notification for same.
Currently we have alrerts configured for any message/s failure in the JMS Adapter Framework. So can we trigger simmilar alerts when a comm channel stops(for whatever reason).
Thanks in advance
RK

Hi Sreeram,
Thanks for the quick reply.
We have a scenario where we activate individual channels at a given time. So in this case, Adapter will always be in RED as all queues are never running in our scenario.
So we need an ALERT to be triggered for individual comm channels. Is theer any way that you can think of ?
Thanks and regards
RK

Variant Configuration / IPC in CRM 7.0

Hi experts,
We are getting runtime errors when we access the Configuration tab in CRM transaction CRMD_ORDER for a configurable product. These errors do not occur when we simulate the model in COMMPR01 for the same product. Any ideas? Here are a couple of things to note:
- The runtime errors occur in the Configuration page itself and does not provide any more information; i.e. we only receive a page with the lines saying "Runtime Errors", "Contact the Administrator", and "Log In". The Log In link does not work and there is nothing in ST22.
- Simulating the model in the product master consistently works.
- When using CRMD_ORDER, the configuration has worked on rare occasions but will timeout rather quickly; i.e. after a characteristic is changed it might give the message to log in again.
- Custom versions of both CRMORDERMAINTAIN and CRMPRODUCTSIMULATION are maintained in COMM_IPC_PROP, and the URL is correct in COMM_IPC_URL.
- The product was replicated from ECC as a knowledge base via object SCE.
Thanks in advance!
John

HI ,
Are you using a secured port?
Try making the SSL enabled setting in the XCM as "FALSE", you can find this under the General Application Setting of the XCM,
let me know if it works.
Restart the java and application once the change is done.
Thanks
Dushyanth
Edited by: vishwas sahu on Sep 23, 2009 8:49 AM

How to configure multiple IP addresses on one NIC?

Hi,
I just installed a OVM Server in version 3.2.1 and the according VMManager. Now i wanted to try to configure the Server/Server Pool. Now i come across a problem, which was already a big problem in OVM 2 while configuring the Networks.
All our OVM Servers have three NICs in them. One is for VMs and Management, the others are for connection to our SAN (Dell PowerVault MD 3220i). My problem is, that due to the network setup, the two NICs for storage need two IP addresses in two different networks each. This shouldn't be a problem, because usually in linux all you have to do is configure something like eth1:1. I remember having huge trouble configuring it in our OVM 2 cluster up to the point where I had to write a shell script to configure the second IP.
Anyways, I have configured two of the storage networks on eth1 and eth2 of the VM Server. Now i cannot configure any more IP addresses, because eth1 and eth2 are not available anymore for configuration in a third network. I really hoped that it would be possible in OVM 3 to configure multiple IP addresses. And probably it is only my lack of knowledge of how to configure it.
So any advice is well appreciated.
Thanks!
Regards,
Marek Hubatka

You should be able to do this by using "VLAN Groups".
http://docs.oracle.com/cd/E35328_01/E35332/E35332.pdf
Check out the VLAN groups section. You must great the VLAN groups before you can assign them to interfaces.

How to Configure PME in CRM 7

Similar Messages

Maybe you are looking for