How to configure event based ALEAUD?

I am sending idocs from BPM to R/3, and would like to know, whether it is possible to get ALEAUD confirmations back to XI in real time. At present it takes about 10 minutes to get the ALEAUDits back, and that will withhold my BPM in idle.

hi Timo,
there are two ways to do that:
not recommended way (if your SAP doesn't have too much resourses) :
1. schedule RBDSTATE to send aleadus sooner (every 2 - 3 minutes)
better way:
2. inside an any kind of exit (worflow, exit etc) for your IDOC in R3 execute the report RBDSTATE
this way it will be sent right after the idoc will be in SAP
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

How to configure RSA Based User Authentication on XR?

Hello,
I have been reading Cisco docs about how to configure RSA Based User Authentication on a ASR9K.
http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-2/security/configuration/guide/b_syssec_cg42asr9k/b_syssec_cg42asr9k_chapter_0110.pdf
I have problems importing the public key to the router. No matter how i try i always get this output:
RP/0/RSP1/CPU0:XXX#crypto key import authentication rsa tftp://10.232.201.180/id_rsa.pub
Wed Jul 16 14:00:15.558
Cannot execute the command : Invalid argument
I have tried copying the file to Disk0: and using this path but get the same error.
Could anyone help me explaining step by step how to configure RSA Based User Authentication.
Thanks

Hi
1. Generate a key on your station
ssh-keygen -t rsa -b 1024
2. Remove the key type and host, leaving only key and decrypt it using base64:
cut -f2 -d\ id_rsa.pub | base64 -d > id_rsa2.pub
3. Import the key to the deivce
(admin)#crypto key import authentication rsa username USERTEST ftp://xxxr/ak/id_rsa2.pub
4. Create a username on the device matching the imported key
username USERTEST
group root-system
Regards,
/A

How to create event based process chains

Hi All,
I would like to know about event based process chains. In connection to this, could you please answer the following queries,
1. How to create events
2. How to link created event to the process chain in the same BI or BW system and as well as from
    externel BI system.
3. How link one process chain with other process chain (i.e, After completion of one process chain, it
    should trigger other dependent process chain)
Thanks and Regards,
Kotesh.

1). Doubt regarding first question.
For example, i would like to create time based event (it should be trigger daily at specified time),
where we have to maintain scheduling options while creating event.
When i checked SM62 there i found only two options a). Event name and b). Description.
Could please send any doucument link if you have.
Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
2). For externel BIW system also same procedure we need to follow or any difference.
Ans : Externally you need to trigger the same event.
3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
But Metachain is preferred for such thing.Though it does similar thing.
Hope this helps.

How to configure Event Correlation

Hi,
I have a requirement where in a Service stop event has to be monitored for the Stop event. If the start events doesn't get logged in the System log in 3 min an alert has to be triggered.
Please advise how do i configure this alert.
Jesty

You may use Create a Correlated Windows Event Unit Monitor, for deail, pls. refer to
http://technet.microsoft.com/en-us/library/hh457587.aspx
http://contoso.se/blog/?p=214
Roger

How to Send Event Based Notifications in the iRecruitment

Hi,
When internal Employee apply for any job, once the person type changes to the Employee.applicant, supervisor should get the notification. I came to know that we can achive this with the irecruitment events.
But i am not clear about the steps to perform.
Please any one provide the steps to configure this notifications in the irecruitment Module.
Thanks in Advance,
Thanks and Regards,
Joshna.

If you wish to do this via subscribing to one of the seeded iRecruitment workflow events, Anil Passi has written a good article on subscribing to workflow events:
http://oracle.anilpassi.com/workflows-business-events-training-lesson-4-2.html
It's not iRecruitment specific but should get you going.

How to Configure Location based Accounts system for a company

Hi Experts,
My client using SAP B1 2007B PL13.
I am configuring the Accounts part. here My client is involved in manufacturing business. so there are 3 locations like
Location 1: Head Office
Location 2: Factory1 and Warehouse1.
Location 3: Factory2 and Warehouse2.
they are asking the financial report for all three locations to find the expenditure and returns. Under this scenario i am confused to configure the accounts system for them, whether, i have to create a 1) segmentation accounts 2) Profit center and 3)cost center.
can anyone guide me to decide and explain a breif work around for my scenario.

Hi rakesh,
Yes, I am just started implementation for my client. their requirement is to take the report on location wise. so initially i have to decide , weather i can use segmentation or profit center ?
note: number of location will increase in future. so having this in mind , i have to decide the best method to make the process easier to the end user in future times too.
are am clear? can u help me out.!!
Thanks & regards,''
Dwarak

How to Configure OIM 9.1 for Request-Based Provisioning

Hi experts,
I am new to OIM and need to know how to configure request based provisioning. Here is the scenario.
My environment has two target systems (Sun LDAP and Novell EDirectory) configured for provisioning to OIM 9.1
A user should be able to login, request either or both (SUN LDAP and EDir) for self or others.
Now the request should go to an admin for approval.
Once approved, the requested accounts should be created on the target systems.
Please guide me on the procedure to be followed.
Many thanks in advance

You will have to download the standard out of box connector for these target systems & will have to import it through the Deployment manager into OIM. Then you will have to create the Process definition of approval type & attach it to the same resource object. Please read the belo link before implementing any thing. This will provide you a better idea.
http://download.oracle.com/docs/cd/E10391_01/doc.910/e10363.pdf

Event based decision

Hi every one,
I am working with jcaps 5.1.3.
I am doing a business process to implement timer event, following user guide of eDesigner on page 63.
I want to receive a message on my business process and do anything whit this message, but I want to control timeout while.
I use a event based decision, but when I build my project I get next error:
I test my business process and I found this error is generated when I configure event based decision (message event).
Have everyone an example How implement a timeout on a bussiness process?
Thanks on advanced,
conhector
com.stc.codegen.framework.model.CodeGenException: code generation error at = initializingnull
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1567)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
at org.openide.util.Task.run(Task.java:136)
at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: java.lang.ClassCastException
at com.stc.codegen.eInsightImpl.model.EInsightCodelet.validatePorts(EInsightCodelet.java:1597)
at com.stc.codegen.eInsightImpl.model.EInsightCodelet.validate(EInsightCodelet.java:1567)
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.validateCodelets(CodeGenFrameworkImpl.java:1049)
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1542)
... 8 more

Hello,
i become acquainted with JavaCAPS at the moment.
Working with the JavaCAPS Tutorial v2.1, i´m having the same problem like conector.
Trying to built the EAR file in project 4 (Viewing store data), CAPS throws an exception named "code generation error at = initializingnull".
I checked the corresponding connectivity map but everything seems to be ok.
Exception:
code generation error at = initializingnullError details:
com.stc.codegen.framework.model.CodeGenException: code generation error at = initializingnull
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1567)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
     at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
     at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
     at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
     at org.openide.util.Task.run(Task.java:136)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: java.lang.ClassCastException
     at com.stc.codegen.eInsightImpl.model.EInsightCodelet.validatePorts(EInsightCodelet.java:1597)
     at com.stc.codegen.eInsightImpl.model.EInsightCodelet.validate(EInsightCodelet.java:1567)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.validateCodelets(CodeGenFrameworkImpl.java:1049)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1542)
     ... 8 moreFor help i would be deeply grateful!
Thanks.

How to configure proxy services in OSB for Rest based services?

how to configure proxy services in OSB for Rest based services implemented using Jersey (Rest).
The Client need to contact OSB proxy servies by posting application/xml using jersey client and OSB proxy service will call the OSB business service.
i would like to know how to get this request in OSB proxy service and send it to the business service and get the response back.

I would suggest you refer to the below links:
https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
https://blogs.oracle.com/jamesbayer/entry/using_rest_with_oracle_service
Hope this helps.
Thanks,
Patrick

How to set a default start and/or end date for New Events based on trigger date.

I'm using the CalendarActivityListener to get current row when clicking on an existing event. As per previous posts this listener gives you access to event detail including Start Date, End Date, etc.
However, what I want to do is to default the start (and end) dates for New Events based on the trigger date.
I've tried the CalendarListener and can grab the Trigger Date from it - however, I can't see a way to pass this directly to the popup/dialog I'm using to create the new event.
At present I'm putting the TriggerDate into the ADFContext session scope e.g. ADFContext.getCurrent().getSessionScope().put("TriggerDate",calendarEvent.getTriggerDate());
Then, I've tried multiple approaches to try and "get" the TriggerDate from session scope to drop it into my new Calendar Event basically, I'm trying to default the InputField(s) associated with the Start Date using the value from the session - I've tried
1. setting the default value for the InputField in the jspx using a binding expression i.e. value="#{sessionScope.TriggerDate}" - this actually sets the value appropriately when the jspx is rendered but, when I go to create I get a NPE and I can't debug. I assumed that it might be a Date type issue - it would appear that CalendarListener provides a date of type java.util.Date and that the StartDate attribute of my VO/EO/table is a DATE and therefore requires oracle.jbo.domain.Date so I tried casting it - to no effect
2. Using a Groovy expression *(StartDate==null?adf.context.sessionScope.TriggerDate:StartDate)* in my calendar's EventVO to default the Start Date to the same result
Any thoughts or ideas?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

How to configure which changes in the document triggers Event Handler again

Hi Experts
Due to some reason after creation of Purchase Order, the event handler is not created in EM system. Now is there any way to resend this PO to EM? For example, is it possible to trigger Event Handler by changing some field in PO? If it is possible that way, Could you guide how to configure which changes in the document (PO/SO/Delivery/Shipment) can trigger Event Handler in EM system?
Thanks
Ravi

Hello Ravi,
if you change the PO Header/Item the respective EH should be created if the Relevance condition is fullfilled.
I'm not sure if it also works in the case that you change the PO Header and EH for PO Items will be created.
Best regards,
Steffen

How to run a particular case continuously in event based state machine architecture.

I am making a program using event based state machine architecture, it is running as expected whenever i am generating an event, case structure corresponding to that event executes.
we are taking some measurements from oscilloscope e.g. i am having one boolean button for rise time whenever i am pressing that that button it displays the value of rise time, it displays only once( since i have generated an event on that boolean button so it executes only once and displays value for one time and then comeback to timeout state) but in our program what we want, we want it to update value continously once that button is pressed.
Now for a time being i have placed while loop on the case corresponding to rise time but this is not the right approach.
since i am using state machine architecture( event based ), i am not getting how to run particular case continuously ,or if there is any other better architecture that i can use to implement the same application.
Attached below is the program.
Attachments:
OScilloscope .zip ‏108 KB

Say, in the attached program, when the user selects Autoset, it inserts corresponding state (Autoset) and now if you want this state to run again and again, probbbly you can again insert Autoset state while executing Autoset state... ohhh its confusing... check the picture below (A picture is worth a thousand words):
1. Based on user selection, insert Autoset state.
2. Re-insert Autoset state again and again while executing Autoset state.
3. Now to come out of this loop, based on appropriate event generation, insert any other state AT FRONT (equivalent to Enqueue Element At Opposite End).
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

How to configuration of pricing procedure based on the Region

Hi,
please help me how to configuration of pricing procedure based on the Region in the roll out project.
Thanks
mustafa

What I proposed to do was,
a. Create routes like 0 day route, 1 Day route, 2 day route etc.
b. Route determination is based on the Shipping condition of the customer. Put in the shipping condition for the customer as 00 - immediate delivery. 01 - By Truck, 02 - By Rail, 03 - Ship etc
c. Now, put in your route determination in such a way that routes change in the sales order with shipping condition (SC). Like, if the shipping condition is set to 00, then 0 day route comes up. Meaning immediate delivery, if SC is 01, then your normal route by truck picks up. etc.
When the sales order is manually created, you know the time of creation. As route is one of the criteria, the material confirmation happens based on number of days you put in the route to reach the destination. Now that you have the material available for today's delivery, the delivery program can be run to create it, or it can be manually created.
Now, when you configure the route you have to specify 'Transit duration in calendar days'.
When you have the sales order created electronically (say thru EDI), then, you may have to ask them to send in shipping condition. Else, you have to modify the function module Idoc_input_orders in such a way that if the sales order creation time is < 12 PM, then put shipping condition as 00, else copy what ever is there in the customer.
If you do not want to check the time manually when the user creates the sales order, then you may have to use the user exit MV45AFZZ (and I think you can use Save_order_prepare) to check the time and change the shipping condition. By this you will avoid extra coding in Idoc_input_orders and also need not bother if the user changed the route or not.
Hope my explanation helps.
Regards,
Mukund S

How to configure network printer on solaris 10 intel based

how to configure the network printer in solaris 10
like hp laserjet printer/printers,

Very very easy.
Go to the print manager . (printmgr I believe or in the launch menu under preferences)
select add a network printer
Fill out the info. I find that the hpijs printer driver works better then the suggested foomatic on my hp 4000s. I could not print pdfs otherwise.
Other things to know is the protocol should be BSD (at least it works for me). And add the port to the destination so 192.168.0.1:9600 for example (for hp).
thats about it. To have it show up correctly in JDS you should probably add it to the printer list under the launch->preferences->printer preferences.

How to I trigger an event based on the status of a pushbutton?

I am trying to trigger an event based on the ON/OFF status of a pushbutton. When I click the pushbutton to the ON position, I want the event structure in a loop to trigger on each iteration until the pushbutton goes back to the OFF position, either manually or programatically. Is there an easy way to accomplish this?
Many thanks.
Solved!
Go to Solution.

Well, lets read the original question:
diarmaede wrote:
I am trying to trigger an event based on the ON/OFF status of a pushbutton. When I click the pushbutton to the ON position, I want the event structure in a loop to trigger on each iteration until the pushbutton goes back to the OFF position, either manually or programatically.
I cannot see anything about "switch until released", only "click to ON" and "OFF manually or programmatically". That seems to be a plain switch action.
JHourigan wrote:
If I want to simply detect a button push event. I set the mechanical action of the boolean button to switch-until-released. Then I use the mouse down event structure on that button to detect the event. It avoids having to include a case structure logic to address the state of the boolean in an Value Change event structure. The button immediately returns to the false condition after release.
So far you are not dealing with the OFF handling at all, which seems to be a requirement. There must be more to it that you mention to get this working as intended. The value of the boolean needs to be constantly monitored anyway, so it might be difficult to do things without a case structure. I am still confused about the logic of it all ....
You should really include a small working example VI so we can see what you are talking about. Thanks!
LabVIEW Champion . Do more with less code and in less time .

How to configure event based ALEAUD?

Similar Messages

Maybe you are looking for