How to configure IP address for FTA (Nova's nFusion) PVR IP recording...

Greetings Peers,
I just got my Time Capsule (TC) yesterday and absolutely have very limited experience with Airport Utility or networking - that said I somehow figured out how to setup a new secured wireless network and it is up & running!
I'm testing this absolute great Free-to-Air (FTA) satellite receiver called *Nova nFusion* where there is a functionality option to record your personal video (PVR) on a IP address.
Here's my dilemma, I have tried punching in IP address from what AirPort Utility (AU) displays for Time Capsule (TC) several times but receiver *would fail* to record anything!
I have tried to tweak general settings like enabling sharing in the manual setup for TC under AU but like I said I'm not an expert and it didn't work.
Wondering:
1) If anyone has success setting up similar PVR over IP?
2) Is this even feasible? Honestly, I don't see why not? Cause I'm also planning to have move my iTunes library folder on TC so I could access it from my Mac Mini, iBook, AppleTV, etc. etc.
I have high hopes specially since I care less and actually do not want to utilize Time Machine feature at all! I'm sure you geniuses have already figured this out. Please HELP!!!
Any feedback would be greatly appreciated-
Cheers!

Tapori wrote:
I've been trying the IP address which shows up on the welcome screen of AirPort Utility but that could be very much TC's Router Address cause it's showing up in AirPort Utility?
How can I acquire IP address for TC's language 1TB Hard Drive? It can't be this difficult!
well, as i'm digging deeper, finding the ip address isn't the issue, it's getting your software to record to it, maybe a permissions issue?
is this open source? can i check it out and see if i can help you this way? if i can get my hands on it i'm pretty sure i'd be more help. if the software just needs an ip address, you got it... so there's another issue. it's in your internal network right? so internal ip's should be fine, no need to port forward...
just brainstorming out loud.
Good suggestion but how do you assign a static IP to a Mac Mini which is on the same network (both wiredly and wirelessly connected to TC)?
open network prefs, select your ethernet connection, configure: using dhcp with manual address, enter ip address (even if it's the same as your DHCP address, this simply assigns it permantly), click apply.
if you wanted to do this over the wireless network you'd choose the airport from the left, advanced, tcp/ip tab, configure IPv4: using dhcp with manual address, enter ip address (even if it's the same as your DHCP address, this simply assigns it permantly), configure IPv6: automatically, click apply.
the ethernet connection would have a different IP than your wireless connection to give you the option to switch back and forth while maintaining assigned connectivity elsewhere in your network (ie. pvr ip recording).
i'm just curious what permissions the pvr ip recorder would have, and where exactly it would record to... (as in which folder... as what user?)
Message was edited by: BKRonline

Similar Messages

Configuring SUP address for IBCM Clients

I have a question about how to configure SUP address for clients that will be roaming from Intranet to the Internet (aka VPN Users)
Currently I have IBCM up and running. Clients report in and are able to download and install software from the IBCM DP. Currently we have group policy's configured to point clients to the correct internal WSUS/SUP servers.
For clients to use IBCM and Internet based SUP is a Windows Update group policy not possible at all? For example is the only way for clients use the IBCM SUP to have absolutely no WSUS Group Policy configured? Is configuring a Domain Group
Policy to have clients point to the Internet Based IBCM SUP not possible?
SCCM 2012 R2
Thank you.

You can create a group policy to point to your SUP. Configure the policy, Specify Intranet Microsoft Update Service Location. Its located in Computer Configuration - Administrative Templates - Windows Components - Windows Update. Note
that the local group policy will be created regardless of using the domain group policy. So, its just a redundant effort.
Best, Jacob I'm a PC.

How to setup IP address for DC&ADC

Hello ,
I have DC server and ADC server I need to configure IP address for both server
correctly ,kindly tell me how do that.
because I have problem : on DC server computer container is empty all computer in my network
appear in ADC however if you search for any computer in DC I can find it
Note: If you have created any user in the server immediately user appear on the other server
thanks

I see, you are worried about what would happen with your Exchange server if one of your DCs go down.
That's not an easy question to answer. It's a very complex question because there are multiple components at play.
First, let's discuss the client side resolver. Each operating system has one no matter if it's a DC, server, workstation, Apple, Unix, Linux, Android, etc. The way they work is based on the industry standard RFCs that explain how they work.
The client side resolver will only look at the second DNS entry if the first entry returns a NULL response (no response) after a time out period. However, if the client side resolver already has the record cached (you can see the cache by running ipconfig
/displaydns) for the TTL of the record, and the DC goes down, well the client side resolver will not query again because it sees it already has it in cache.
Exchange will automatically look for another LDAP, Config and GC if the one it's using goes down. However, Outlook isn't so forgiving. It locks on to a GC and a DSProxy for the Exchange server. If the GC goes down, you have to restart Outlook. That's going
to be difficult if you have lots of users.
And if Exchange is on a DC, that doesn't work that way because it *locks* on to the DC/GC it's installed on. I hope your Exchange server is not on a DC.
Here's more specifics on how the whole process works - and note that this applies to all operating systems, Windows, Linux, Unix, BEOS..... because they all follow the RFCs defining how client side resolvers work.
This blog discusses:
WINS NetBIOS, Browser Service, Disabling NetBIOS, & Direct Hosted SMB (DirectSMB). Troubleshooting the browser service.
Client side resolution process chart.
The DNS Client Side Resolver algorithm.
If one DC or DNS goes down, does a client logon to another DC or use the other DNS server in the NIC?
DNS Forwarders Algorithm and multiple DNS addresses (if you've configured more than one forwarders or more than one IP in the NIC's DNS list)
Client side resolution process chart
Published by Ace Fekay, MCT, MVP DS on Nov 29, 2009 at 10:28 PM 1764 1
http://msmvps.com/blogs/acefekay/archive/2009/11/29/dns-wins-netbios-amp-the-client-side-resolver-browser-service-disabling-netbios-direct-hosted-smb-directsmb-if-one-dc-is-down-does-a-client-logon-to-another-dc-and-dns-forwarders-algorithm.aspx
DNS Clients and Timeouts (Part 1 & Part 2), karammasri [MSFT] Dec 2011 6:18 AM
http://blogs.technet.com/b/stdqry/archive/2011/12/02/dns-clients-and-timeouts-part-1.aspx
http://blogs.technet.com/b/stdqry/archive/2011/12/15/dns-clients-and-timeouts-part-2.aspx
DOMAIN NAMES - CONCEPTS AND FACILITIES - Dicusses local resolvers.
http://tools.ietf.org/html/rfc882
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

How to configure release procedure for rate contracts release

Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
                if c1 is not there c2 has to be approved
     Change in the value of the rate contract contract
     Change in the validity of the rate contract
     Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskar

Hi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

How to configure Broadcast messaging for IC Webclient profile

Dear all,
How to configure Broadcast messaging for IC Webclient profile. what are the prerequisites for it?
We are not using EP interface for IC Webclient, then where can I find broadcast messaging URL in SAP CRM system.
I have checked for the relevant BSP application, but could not find.
Please help me to configure the scenario successfully, your help will be highly appreciated.
Best regards,
Raghu ram

Hi raghu
In CRM Broad cast messaging application is CRM _BM,
Go to easy access u2013 go to favourites u2013 select add other objects - select BSP Applications- then select CRM_BM Application.
Select that BSP application and test it u2026
`
Regards,
Narsimha

How to configure website address to http request

hi
How to configure website address to http request
(I want access JBOSS URL: http://localhost:8080/HIS/Login using website like www.HIS.com)
Please help me.

What I'm trying to do is connect my laptops built in wifi adapter to my home network and connect my usb wifi adapter to my phones hotspot then combine the bandwidth into one stream so that my speed is faster.

I have an iPad and want to know how to delete email addresses for those that I have sent email to.

I have an iPad 2 and want to know how to delete email addresses for those that I have sent mail to.

Email addresses that are not in your Contacts app but which still show up in Mail will disappear after a period of time when they are unused. Just ignore them and they will eventually go away.

How to configure Email notification for User login's in Exchange Infrastructure?

How to configure Email notification for User login's in Client Machines?

Hi ,
Based on the description , you need to assign logon scripts to the end users via group policy and also use your exchange server as the smtp server in that logon script to relay emails to the internal recipients.
Thanks & Regards S.Nithyanandham

How to configure SMTP server for osb 10.3.1

Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!

Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something.

How to configure mail server for subscription

Hi,
I want to test subscription. My problem is how to configure the mail server.
As to my understanding, we need first configure mail server, then the user can choose "Subscribe" in the Details screen of a folder.
My steps are:
1. In KM - CM - Utilities - Channels, specify SMTP server, userId and password.
2. In KM - CM - Utilities - Channel originators, set the Original address for notificator.EMAIL.
3. In KM - Collaboration - Groupware Transport - Mail Transport, specify SMTP server and sent message folder.
After that, when I choose a user and click "Send email", it failed saying "Failed to communicate with SMTP server when sending the email.".
Could anyone tell me what's wrong with my configuration, or what should I do to make subscription work?
Thanks,
Ray

Hi Vineeth,
Thanks for help.
According to your steps:
1. set up a mail transport and making notification and mailing service active.
In System admin - KM - CM - Global services, I've enabled Inbox, Mailing and Notification services.
In KM - CM - Collaboration - Groupware Transport, I've set up a mail transport:
Name: JavaMailTransport
SMTP Server: smtp.yahoo.com
Sent message folder: /documents
System alias name: mytransport
2. Give everyone read permission on notifications in KM.
Where can I set user's permission on notifications? I think you mean folder /etc/notifications, but I don't know how to set permissions.
3. Check if proper id's are maintained in users profile.
How to do this?
Thanks for help~~
Regards,
Ray

Configuring Listen Address for a machine / node manager

Hi,
If I give the localhost as value for the Listen Address for the machine (and this the Node Manager), I can start/stop any managed server belonging to the domain
and related machine.
When I change this address to the value of the IP address I get from "ping hostname" (that is to be found in /etc/hosts), or the corresponding host name found in /etc/hosts,
I get the following Warning from the Console:
- For server <managed server>, the Node Manager associated with machine MyMachine02 is not reachable.
- All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.
Can someone explain me how can a machine and the node manager be configured with another value than localhost for the Listen Address?
Is there maybe a configuration that must be done at physical server level?
Having this functionality will be a necessity for a cluster.
Thanks by advance for sharing your experience.

Actually the cert is coming from your Dev machine but it is sending the Prod cert.
What cert is used by your admin server ? It should match the host name.
So your Dev machine is apparently using a copy of the prod cert / keystore rather than using its own DEV cert. It's not clear from your post whether this is the nodemanager using the wrong cert, or the managed server. So both should be checked.
The managed servers need to be using a cert that matches their host name. If you have a managed server on VM-BEA-DEV, then the cert needs to be CN=VM-BEA-DEV. You can also use a load-balancer CN name in the cert if you have the cluster's HTTP values set to match.
In your nodemanager.properties, are you explicitly accessing keystores, such as with:
KeyStores=CustomIdentityAndJavaStandardTrust
CustomIdentityAlias=some_alias
CustomIdentityKeyStoreFileName=some_path_to_keystore
CustomIdentityKeyStorePassPhrase={3DES}...
CustomIdentityKeyStoreType=jks
CustomIdentityPrivateKeyPassPhrase={3DES}
In my multi-machine clusters, I have multiple certificates such as:
admin machine1:
has a cert for use by the admin server and NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers
all other machines:
has a cert for use by NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers

OBIEE 11g - How to configure Virtual IP for servers hosting OBIEE 11g

Hi,
I have 2 Linux servers.
I have installed OBIEE 11.1.1.6 on first server and did a scale out on second server.
I don't have a Load Balancer.
I want to configure Virtual IP for these hosts.
Please advise how to do it.
Thanks
Nitin Aggarwal

Refer to below lhks.
http://www.rittmanmead.com/2008/12/obiee-high-availability-the-bi-server/
http://www.rittmanmead.com/2009/02/obiee-high-availability-presentation-services-and-scheduler/
Thanks
Jay.

How to use multiple addresses for a global vendor

Hi experts.
scnerios is.company has different plants in different countires.they have centrally agreed contract with vendor.now each plant create p,o is in different country how can we use that vendors local addresses in p.o because in vendor master we can define one addres at a time.so if that adrees is in other country.and plant creating p,o is in different how can select the local address of that vendor.
if option is partner function then how to use it.all adressess witl be odering address of that vendor.his offices is alll the counties.
thanks

IQBAL,
You can maintain multiple addresses for the same vendor using international addresses.
First, you have to Activate International Address Versions for each country/language via config at
IMG: Flexible Real Estate Management (RE-FX) > Address Management > International Settings > Activate International Address Versions (You can do this even if you are not using Real Estate Management
Then, in the vendor master, address screen, select the "International Verion" button, select the address version and maintain your address.
If you have any programs that need to display or print these addresses, you will have to specifiy the address version to display/print. by default, the version (Field = NATION) is Blank.
I hope this helps.

How to configure simultanous access for 11i application

Hi All
We have one existing 11i application instance on node grid1.In which we start the servicess from apps user.
In our same we want another node for the same application in which we will start the servicess from another user(merge)
For that we perfrom the following steps
1.Copy the APPL_TOP,COMMON_TOP,ORA_TOP(8.0.6,iAS) from node "GRID1" to diffrent node "GRID2"
2 configure the GRID2 node using adcfgclone.pl utility(we have configure new node for WEB and FORM Server)
3 We perfrom the modification in the following files ON GRID2 .
i Identify 'FNDNAM=apps' statement in $FND_TOP/secure/<context>.dbc
and replace with 'FNDNAME=merge' to connect to MERGE schema instaed of APPS.
ii. Go to the last line of $APACHE_TOP/jserv/etc/zone.properties file
and identify 'schema=APPS' statement and change it to 'schema=MERGE'
iii. Identify below lines in $APACHE_TOP/modplsql/cfg/wdbsvr.app file
password = apps
     username = apps
     document_table = APPS.fnd_lobs_document
and replace with modified below lines
password = merge
     username = merge
     document_table = MERGE.fnd_lobs_document
6. For redirecting user's request to new Application Server server, we
changed the following 4 system profile options with proper URL and port
at responsibility level only for the responsibilities,
which we use for Merge views.
Profile Options
     Application Framework Agent
     Applications JSP Agent
     Applications Web Agent
     Apps Servlet Agent
When we are able to start the services on GRID2 node,but at the time of login we are getting invalid user name/ passwd error
Please let us know is there any way to access application other than apps user
Regards
Sohail

well thank you very much .I know how to define a DataSource inside Weblogic Server.
But i am confused over one issue
When We are going to use Container Managed EntityManager inside the SessionBean the persistence.xml file looks like this
*<persistence>*
*     <persistence-unit name="RamsEJBPU" transaction-type="JTA">*
*          <jta-data-source>myJtaDataSource</jta-data-source>*
*     </persistence-unit>*
*</persistence>*
But in some cases it looks like as shown below :     <persistence-unit name="RamsEJBPU" transaction-type="resource-local">
     <provider>org.hibernate.ejb.HibernatePersistence</provider>
                  <properties>
               <property name = "hibernate.connection.driver_class" value = "oracle.jdbc.driver.OracleDriver"/>
               <property name = "hibernate.connection.url" value = "jdbc:oracle:thin:@localhost:1521:orcl"/>
               <property name = "hibernate.connection.username" value = "CHENNAISPAT"/>
               <property name = "hibernate.connection.password" value = "CHENNAISPAT"/>
            </properties>
     </persistence-unit>
</persistence>Can you please tell me why is it so ??

How to configure Oracle SSO for forms and apex

Hi All,
I am trying to configure oracle SSO for forms and apex using third party external authentication. Please help me how to configure. I a have tried all possible things
from web but I am not able to do it. Is there any doc or links are much appreciated.
Info: Some reason my oiddas web link is not working it used to work fine before and also the from /pls/orasso/ link I am not able to login may be because of my oiddas issue
Thanks

Hi Andreas,
Thanks you for your help. I am trying to implement third party external LDAP authentication for APEX and Forms.
So I started with OID and SSO setup to create external Partner Applications. Some reason my oid and sso web login links are not working. I didn't find any errors. I need some help in finding the problem and direction, I already read docs on web but no proper direction. I appreciate your help.
Thanks

How to configure IP address for FTA (Nova's nFusion) PVR IP recording...

Similar Messages

Maybe you are looking for