How to configure jre on an english platform to support other language?

Im currently running jdk 1.4.2.07 on a HP-UX B11.11 server.
I use "JFreeChart" to create charts in my project, and when I include chart title in Asian fonts, the chart render correctly with the correct font on the testing windows environment (which runs as traditional chinese).
However, when I deploy the same program to HP-UX, the Asian fonts fails to render properly.
I think this has to do with the environment, and I also found some suggestions on the web about changing the font.properties of the jre, but most of them are quite ambiguous.
Is this the solution to my problem? and how exactly should the cofiguration be done?
Thanx,
I really appreciate any help ^_^"

We are facing a similar issue. Did you have any luck with this?
Thanks

Similar Messages

  • How to configure the database monitoring (DBA Cockpit) after Support pack

    Hi,
    I did the Support Pack Upgrade for BW system and i ran SGEN as well, now i need to configure the database , could you please suggest how to configure the database monitoring (DBA Cockpit) after Support Pack Upgrade.
    Server is MSSQL , Component is SAP NetWeaver 2004s and OS is Windows NT.
    Plesae suggest.
    Chandu.

    Hi,
    You are right. SAP delivers this functionality from SP-12. So when you have applied the SP-12, you must have done these config steps to enable the DBA Cockpit.
    If you have done these steps earlier, So you must have DBA Cockpit enable right now and putting extra SPs like 13, 14 and so on, should not be a matter.
    Now if you have not performed those config steps before, Please do them now and you will be able to use DBA cockpit.
    Please understand that SP12 is the base to run DBA Cockpit.
    With Regards,
    Saurabh

  • I want to translate output of JSP from English to HINDI and other language.

    hi frens !!
    i want to translate output of JSP from english to HIndi and other languages.I need the class which could traslate the Output in other languages.
    Thanks and Regards
    Allwyn

    hi frens !!
    i want to translate output of JSP from english to
    HIndi and other languages.I need the class which
    could traslate the Output in other languages.
    Thanks and Regards
    Allwynit looks like your translator is not working correctly. read up on internationalization.

  • HT4322 if i have song in English, Portuguese, Italian and other languages, will voice-over be able to speak correctly

    if i have song in English, Portuguese, Italian and other languages, will voice-over be able to speak correctly

    The way VoiceOver works is by "recording" the computer's voice speaking those song names on the computer during the sync.  The shuffle is not actually generating a voice and speaking the names.  It is just playing the recording of computer speaking those names.
    Therefore, if the computer voice can say the names properly, you should hear the names properly using VoiceOver.

  • Convesion English version(ERP) to Other Languages

    We have an ERP which is developed on oracle 8i and Forms6i.All the trigger are english (American.america xxxxxxxxx)If we chage the nls_language parameter into other language format and try to run .will it work? Are the procedure and validation writtem in english language will work according to the original business logic.
    If any body have any idea plesae mail to me because we are constantly busy with this activities and try to convert into multi language.Is it required take care at the time of ace database installtion

    HI,
    Go to SM30 and input T006A and click on Field Maintenance Dialog botton and select the T006A once again and click on maintain.
    Here you get the list of UOM's and language key.
    Now in the yop menu click on goto and click on translation and you can maintain different language for UOM's.\
    Thanks & regards,
    Kiran

  • How to configure jre

    Hi,
    everyone I have installed ODS 10g  and I have done few config to base file to direct oracle application server to use jre instead of jinit and I installed both jre version 7 and jinit 1.3.1.30(these are installed in C:\ where as my DB and ODS is in E:) even tough while running a form I am getting an error "low version of jinit is installed" "Install higer version" (I am using IE7 as my default browser) how to solve it ? Do I have to config jre too, If yes what is the procedure?
    please send the solution as soon as possible
    Thanks,

    please use jre only
    change basehtml to basejpihtml and configure the sun plugin parameters
    Jan-Pter

  • How to configure and use informatica development platform ?

    Samples and documentation for the Mapping API are, as far as I recall, part of the PowerCenter client installation; open a Windows explorer and look into the client installation directory tree, you should be able to find it fast. As of my knowledge there's nothing comparable to the Mapping API available for the Developer yet. You have two choices (which I see at this moment):Hope that Informatica v10 will contain this feature.Create your objects in PowerCenter using the Mapping API. Then export all objects from PowerCenter to XML files in the format used by the Developer and import these XML files into the Developer (infacmd.sh importFromPowerCenter should prove helpful here). Regards,Nico

    Hi Could some help me in using IDP to create the intormatica mappings dynamically?Basically I am looking to configure the environemnt to use the design APIs. Any help would be appriciated!! One more point I need to ask, whether Informatica provide any design APIs for data vurtulization( i.e creating logical data objects dynamically in developer tool and create the IDS on that ) Regards,Nikhil

  • How to configure user preferences for each platform

    Currently i dual boot Kubuntu and windows 7 and use a single profile that is shared by both the OS's. The problem is that some changes such as auto-scrolling, double click to copy url text are disabled/configured differently in linux to what i like. I can manually enable auto scrolling in linux, but when i switch to windows and then switch back it is disabled again.
    Is it possible to make a user.js file that sets preferences based on the operating system, eg: user-windows.js, user-linux.js or something like that? I know I can use different profiles for each OS, but it requires keeping all the addons/bookmarks in sync everytime i switch, which i do atleast a couple of times a day.

    hello, with the mozilla.cfg file in the firefox program folder you can set preferences independent of the profile: http://kb.mozillazine.org/Locking_preferences
    edit: these functions can be used in the mozilla.cfg file:
    defaultPref(); // set default value of a preference
    pref(); // set pref, allow changes during session
    lockPref(); // lock pref, disallow changes

  • How to remove the redundant input English (United States) in the Language Control Panel on Windows 8?

    I have English (Australia) and English (United States) in the same order installed in the Language panel.
    I try to remove the redundant English (United States).  I click Options to open it.  I found the option Remove for the Input method is dimmed out and disabled.

    Hi,
    To uninstall language package try following steps:
    Type lpksetup.exe in search charm.
    Press enter to open Install and uninstall display languages wizard.
    Try to uninstall it.
    If there is any error happened, post back here.  
    Kate Li
    TechNet Community Support

  • CVP Language change (English and option for other Language)

    Hi,
         Currently in our IP IVR we give our callers the option to switch to spanish.  I want to do the same in CVP but I'm not sure how.
    I guess I could create an English page and a Spanish page so that if the callers enter the option for Spanish it would "move" the call to the Spanish page in which all prompts are Spanish.
    Currently, using IP IVR,  our English and Spanish prompts are name the same so we can just send the call back to the beginning and change the Language.
    Any ideas are appreciated.
    thanks

    I see three methods:
    1. Set the default audio path to something like: http:// address>/
    Create a session variable say Lang - Intial value "en-us"
    Prompt for Spanish. If they want that, reset Lang="es-es"
    All prompts in the application would be set as {Session.data.Lang}/app/my_application/foobar.wav
    2. In CVP7 you can start off with Default Audio Path = http:// address>/en-us/my_application/ and use the Application Modifier node to reset the default audio path for Spanish. All prompts would be a WAV file name like foobar.wav
    3. make the language selection a microapp - I always use microapps for such simple things - and pass the language in as a session variable which then flows through to the VXML application.
    I think what is holding you back is that you did not realize that what goes into an audio element as the WAV file can be a complete URL, or part of a URL that is appended to the Default Audio Path, and you can include Session Variables in this. There is a lot of flexibility here.
    Regards,
    Geoff

  • How can I change my Photoshop CC(Eng version) to other language?

    I just download the Photoshop English version but I found that I would be more comfortable to use a Chinese version.
    Would anyone be so nice to help me out?
    I did try to go to my Creative Could app > preference > apps and change my app language.
    However it does not change anything at all.

    Yes it, does. You need to reinstall the program in the chosen language.
    Mylenium

  • I upgraded to ios6 when I was in France and now my iBooks are in French - does anyone know how to change it back to English ?

    I upgraded to ios6 when I was in France and now my iBooks are in French - does anyone know how to change it back to English ?  Thanks.

    I upgraded to ios6 when I was in France and now my iBooks are in French - does anyone know how to change it back to English ?  Thanks.

  • Speech transcription in other languages.. not english

    hello,
    in my speech transcription options.. is enabled only in English but in no other language .. as Spanish, which is what I need. The video interview is in Spanish. I tried reinstalling the program .. but does not work .. what may be happening? option works only in English .. all others are grayed out .. disabled. help please!

    Harm Millaard wrote:
    Since it does not even work in English, I would not worry about the lack of other languages. It probably was a very, very bad effort from a former Dragon employee to get it included in CS4. I just hope they leave it out in CS5, because it only bloats the software without any benefit at all.
    Its far from perfect, and I have no use for it myself.  BUt there are are users who like this feature and even in its imperfect state saves them time in their workflow.  Imagine doing a docu with 90 minutes of talking heads and three camera angles.  Searching for a word or phrase by scrubbing would take a long time.  Searching by text is almost instantaneous.  The transcription isnt perfect but it often is close enough to be helpful in this workflow.
    Useless for many perhaps; but useful for some.

  • How SAP supports different languages

    Hi All,
       I need documentation on How SAP interacts with other languages i.e. How SAP supports other languages and what is the role of technical people and also functional people to maintain the different languages.
    Thanks & Regards,
    Amit Suryawanshi.

    Hi,
    Internationalization is available in SAP.
    The goal of Internationalization is to provide the technical foundation for enabling programs to support multiple scripts and languages without redesign or modification. Once a user has selected a logon language, all programs must transparently alter their run-time behavior to meet the expectations of the user. Internationalization furthers generic programming, because hard-encoded search strings, error messages, etc. may work in one language, but not in another.
    Internationalization interacts with every face of the system: logon language, language input, menu texts, sorting, character conversion, printing, data transfer - simply put, it is the technical underpinning of global business software.
    If a system or application can support any language, then it is fully internationalized; if it only supports a limited set of languages, then  it is partially internationalized. SAP offers full internationalization by supporting Unicode code page technology.
    I hope the following link will help you....
    http://help.sap.com/saphelp_nw04/helpdata/en/8e/7ce87a2aede645ae3cdc857b791590/content.htm
    Regards,
    Harish

  • How to configure apache for ssl in windows platform

    hi all,
    can anyone help me expalin how to configure apache for ssl in windows platform.

    George,
    I would take the following 'first steps'
    1)Install Apache20 on your Windows machine following the Apache online documentation
    http://httpd.apache.org/docs-2.0/misc/tutorials.html
    2)Make sure you can 'serve up' static HTML content from your Apache Server
    3)Install Weblogic Server per our online documentation
    http://edocs.bea.com/wls/docs61/install/index.html
    4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
    directly from WLS server
    5)Once you have both of the above 'sanity' checks attempt to configure a simple
    proxy by ppath or mime type via our online documentation
    http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
    Chuck Nelson
    DRE
    BEA Technical Support

Maybe you are looking for

  • I can't install iTunes because an older version can't be removed.

    I can't seem to get Itunes to install. It keeps giving me a message that it can not remove an older version of Itunes. I've deleted every Apple related file, per recommendation of this site. I went in an cleaned up the registry of every reference to

  • I need advise on whether to upgrade my iBookG4 or get a new computer?

    Hi everyone! This is my first post here, and after reading through some of the other posts I realize that many people are having the same problems as me with my OS 10.3.9. I have been having issues with my computer for a while, and keep spending mone

  • Can't import data-only Excel doc into Numbers 2013

    This is a disaster. I just downloaded two .xlsx Excel documents, and attempted to open them in the new (2013) Numbers. These were the simplest possible documents. 101 rows, 17 colmns, no header/side labels. I don't think it included any calculations

  • How-to use captcha with ADF Faces 10g (10.1.3)

    Hi All, Could You Pls tell me how to use the captcha using 10g currently i am using the jdeveloper version of 10.1.3. I have found the link for using the *[captcha using 11g|http://www.oracle.com/technology/products/jdev/tips/fnimphius/captcha/captch

  • No charge while using GPS app...

    I'm using the MotionX-GPS app on a iPhone 3G. On a 3 hour road trip recently, I connected the phone to the car charger cable and proceeded on my trip. I noticed that even though the phone was on the charge cord, the battery was still depleting at a g