How to configure links in My Services Lane

We have the requirement to configure links in the My services lane so that user can quickly reach out to basic services like Address,Bank Details, W4 withholding info etc.
Please suggest , we are struggling for the same.

http://scn.sap.com/community/erp/hcm/blog/2014/01/13/adding-another-launchpad-based-chip-in-hr-renewal check above and share your screen

Similar Messages

How to configure link between 2921 and SM-D-ES3G-48-P EtherSwitch Service Module

hi,
I can't do that like the procedure given by Cisco.
http://www.cisco.com/en/US/partner/docs/routers/access/interfaces/software/feature/guide/eesm_sw.html#wp1942894
Cisco Procedure :
interface gi10/0
ip address x.x.x.x x.x.x.x
service-module gigabitethernet 1/0 session
My result :
R2921-8CPITR-1(config)#int gi 1/1
R2921-8CPITR-1(config-if)#ip address 2.2.2.2 255.255.255.192
% IP addresses may not be configured on L2 links.
R2921-8CPITR-1(config-if)
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1.1 ?
% Unrecognized command
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1 ?
<cr>
R2921-8CPITR-1(config)#
the session is not possible also ?
R2921-8CPITR-1#service-module gigabitEthernet 1/1 sess
                                                  ^
% Invalid input detected at '^' marker.
R2921-8CPITR-1#
The routeur said that it's not a L3 port, so how to configure it to allow communication between the 2921 and the card ?
Is there a bug with that version I'm in 15.1(4)M4 ????
R2921-8CPITR-1#sh ver
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 18:57 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
R2921-8CPITR-1 uptime is 19 hours, 21 minutes
System returned to ROM by power-on
System restarted at 16:00:45 GAB Fri Sep 14 2012
System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID FGL1618119E
6 Gigabit Ethernet interfaces
2 terminal lines
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO2921/K9          FGL1618119E
Technology Package License Information for Module:'c2900'
Technology    Technology-package           Technology-package
              Current       Type           Next reboot
ipbase        ipbasek9      Permanent      ipbasek9
security      None          None           None
uc            None          None           None
data          None          None           None
Configuration register is 0x2102
R2921-8CPITR-1#

Same issue here.
I just waited a few minutes and the interface went down and back up, this time it was a L3 interface.
My guess is that it was booting the switch module IOS, and it detected it until it was fully booted:
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:26:52.795: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
Apr 11 05:27:46.947: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
Apr 11 05:27:47.031: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
Apr 11 05:27:47.083: %LINK-5-CHANGED: Interface GigabitEthernet1/0, changed state to administratively down
Apr 11 05:27:47.895: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
Apr 11 05:27:48.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to down
Apr 11 05:27:49.283: %IP-5-WEBINST_KILL: Terminating DNS process
Apr 11 05:27:52.499: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
Apr 11 05:27:53.087: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 04-Sep-12 16:50 by prod_rel_team
Apr 11 05:27:53.255: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
Apr 11 05:27:53.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up
Apr 11 05:28:21.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Apr 11 05:29:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to down
Apr 11 05:29:22.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Router>en
Router#sh ip int brief
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES unset administratively down down
GigabitEthernet0/0 unassigned YES unset administratively down down
GigabitEthernet0/1 unassigned YES unset administratively down down
GigabitEthernet0/2 unassigned YES unset administratively down down
GigabitEthernet1/0 unassigned YES unset administratively down down
GigabitEthernet1/1 unassigned YES unset up down
Vlan1 unassigned YES unset down down
Router#
Apr 11 05:29:46.106: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to upconf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int g1/0
Router(config-if)#ip add 1.1.1.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
Apr 11 05:30:09.046: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:30:10.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Router(config-if)#end

How to configure Apache/Portal to service 2 separate groups of users

Before someone say this is a Portal issue - please read on.
I would like to know how to configure Portal to service 2 separate groups of * Internet * users (A and B) all within the same installation so that when a user enters www.aaa.com or www.bbb.com that user is directed to a public page for that group only.
Currently, when a user of either group enters www.aaa.com or www.bbb.com they arrive at the same public page where they can click on a link and goto their respective private pages (SSO Protected) after logging in.
My installation facts
infra - host1.mycompany.com
portal - host2.mycompany.com (www.aaa.com and www.bbb.com are pointing to this host)
j2ee - host3.mycompany.com
I have configured web-cache to listen on port 80 and direct all requests to host2.mycompany.com:7778.
I used RedirectMatch within host2 httpd.conf to redirect any request to the portal public page.
I wondering if it is possible to read the "IP NAME" and do a RedirectMatch on it. In other words when a request come into the Apache listener - is it seeing an IP address request or an IP name ie "www.aaa.com". Because if it is - then there may be some way to redirect based upon that. My assumption is the "http://www.aaa.com" cannot be read by RedirectMatch - only the portion after "http://www.aaa.com/mypage" ie "mypage.
Any help is appreciated!
Bill G...

I don't think the issue is one of Apache (not even sure it's one of named virtual hosts since you want both sites to serve the same content). The issue is one of having multiple .local names point to the same machine.
I don't know this can be done without your own DNS server running in the network.

URGENT: How to Configure Ruote to Business Service that invokes 2 methods

Hi,
I am using ALSB 2.6.
Currently I am working on a project, in which i have to configure business service and proxy service.
Now the problem which i am facing is the following :-
I'm trying to configure my Proxy service to route to 1 Business Service which in turn invokes 2 methods.
I want to know how can i configure this route to business service that invokes 2 methods.
Right now, to execute/ invoke any of the method i need to invoke each method by changing manually in the rotuing flow.
Can any one tell me how can i configure both the methods for the same business service in a single rotuing flow only.
Presently i am configuring it in this way:
Route to BUSINESSSERVICE invoking METHOD1.
At the place of method 1 theres a drop box from where you select the desired method.
I want to know how to configure both the methods in single rotuing flow so that it invokes the desired method without manually editing it each time.
What is the best solution to this problem? I would very much appreciate any help on this!
Regards,
Samir

Hi,
You can create a pipeline pair, add one (or more stages), and inside of the stage, invoke the a service callout to your business service.
Regards,
Fabio Douek.
Regards,
Fabio Douek

How to configure business objects web services

Hi can anyone tell me were can i find these web services in cmc, and how i need to configure these webservices.in order to talk externally with the java program.
my scenerio is, java program will kick off to send the parameters to the web services in business objects. The web services need to take those parameters from java and create a file and drop it locally or anywhere

Hi
Which version you are on?
if it is XI 3.x then, dswsbobje is the web application which is deployed on default tomcat, You can get the details of of all available web services by :http://BOEHOSTNAME:PORT/dswsbobje/services/listServices
Regards
Ashwini

To Do List Channel - How to configure links to queries?

Hi!
In the 'To Do List' Channel on the home page I have a link to Projects which shows a number in brackets at the end, which is usually the number of items you see when you follow the link, at least it is for my other examples...
However when I follow the Projects link I see a much smaller number of projects listed, so it would seem that different queries must be being executed...
So far I have not been able to find how this is configured - can anyone point me in the right direction please?
Many thanks!
Stuart

Hi,
You can do the following to configure your To Do List channel:
In the To Do List channel, click Edit.
On the Header page, clear the Use Channel Default Parameters checkbox if it is checked.
In the table under Parameter Values, the Parameter Value column indicates whether an event type is set to appear in the channel. Click the Edit icon for the event type to edit.
In the dialog box for New Channel Parameter Value in Channel Configuration, do one of the following:
- Check a box to select an event type for the channel.
- Clear a box to remove an event type from the channel.
Click OK.
Click the Save button in the toolbar.
Note: To return to the default event types, check the Use Channel Default Parameters box.
Also, if you goto Setup --> Query Definitions and key in projects, you can see the list of all Queries that are associated with projects. From this you can determine which ones are being accessed by the To Do List.
Some of these that I can see are:
All Project Details - FCI-MomentumRepAllProjects
All Projects -     FCI-AllProjects
All Projects Available As Subprojects -FCI-AvailableAsSubProject
All Projects Counted - FCI-MomentumRepAllProjectCount
Were you looking for this information?
Thanks,
Vikram

How to configure the Java Web Services Environment

My computer is not connected to a network or to internet.
I want to perform below mentioned tasks locally(in my own computer).
[1] Assume that I am the service provider and I want to publish
the service in a Service Registry.
[2] Now assume that I am also acting as a Service Requestor and
I want to find the available services from the Service Registry.
[3] As a Service Requestor now I found the required service and
I want to access that service from the Service Provider
(Service Provider is also myself) .
My questions are....
[1] Is it possible to perform above all tasks in my local computer ?
[2] If it is possible, what are the Configurations & Settings that have to be done ?

You need to add to your CLASSPATH variable
the javatv.jar location and to the PATH variable
the javatv_fcs location(not the lib).
You also need to install jmf and jaxp packages.
Have fun.

How to configure XMLP as Windows service

I installed XMLP on Windows Server 2003. It works fine when I login in and start the server directly. How can I configure the server so that it start when the server is rebooted without having to lgoin as a user and start it directly? I work mostly in linux, and my windows support folks are baffled. <sigh>

Im being lazeee here and have not had time to test this but I found
http://radio.weblogs.com/0132383/stories/2004/04/28/oc4jAsAWindowsService.html
The XMLP server runs inside the OC4J J2EE container so it should work. If you try it please let us know how you get on?
Regards, Tim

How to configure links (navigator)

changing colours? their are boring (a some)

argos.void wrote:ok.(wow!) thanks. but the same in links is possible?
Sorry, I have absolutely no idea, I never used links. You should check the links webpage and manpage to see how can you setup custom styling.
Edit: from links manpage:
-background-color 0xRRGGBB
Set menu background color in graphics mode. RRGGBB are hex.
-foreground-color 0xRRGGBB
Set menu foreground color in graphics mode. RRGGBB are hex.
Last edited by karol (2010-07-20 17:15:12)

How configure a primavera web service to return data from the second database?

Hi everyone,
We have P6 with first WS deployed on a single server weblogic domain. The first WS return data from the first database instance.
Then deployed advanced second WS on a separate weblogic domain server with a different port. Configured second WS with <WS2_INSTALL_HOME>/bin/dbconfig.sh, creating a new branch of a configuration that specifies a different second instance of the database. However, this configuration is ignored and second web services return data from the first database.
We have one domain, which including next servers:
Name / Host / Port / Deployments
P6 / localhost / 0001 / P6(v8.3), p6ws1(v8.3)
p6ws2 / localhost / 0002 / p6ws2(v8.3)
Now we have two different file BREBootstrap.xml.
P6 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db1:1521:db1</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass1</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB1" instances="1" logDir="anydir/P6EPPM/p6/PrimaveraLogs"/>
</Configurations>
p6ws2 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db2:1521:db2</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass2</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB2" instances="1" logDir="anydir/P6EPPM/ws2/PrimaveraLogs"/>
</Configurations>
‘P6 Config_DB1’ and ‘P6 Config_DB2’ including Database property for 1 and 2 database respectively.
How to configure a second web service to return data from the second database?
Thanks in advance!
Regards,
Dmitry

OK, so I got this to work this morning with Username Token Profile (with little help from Oracle Support).
I followed your steps 1-4 but in step 2 I didn't add the -Ddatabase.instance=2 because I want to check to see if my code could swap between different instances.
It appears for Username Token Profile to use Database Instance, you need to set it in the soap header.
So my soap request looks like this:
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
    <s:Header>
        <DatabaseInstanceId xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Authentication/V1">2</DatabaseInstanceId>
        <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
            <u:Timestamp xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3'>
                <u:Created>2014-10-23T04:28:01.152Z</u:Created>
                <u:Expires>2014-10-23T04:29:01.152Z</u:Expires>
            </u:Timestamp>
            <o:UsernameToken u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3' xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd'>
                <o:Username>admin</o:Username>
                <o:Password Type='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText'>password</o:Password>
                <o:Nonce EncodingType='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary'>vJBQhCc28bAeszej7gOaiC2tVCQ=</o:Nonce>
                <u:Created>2014-10-23T04:28:01.152Z</u:Created>
            </o:UsernameToken>
        </o:Security>
    </s:Header>
    <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
        <ReadProjects xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Project/V2">
            <Field>ObjectId</Field>
            <Field>Id</Field>
            <Field>Name</Field>
            <Field>Status</Field>
            <Field>StartDate</Field>
            <Field>FinishDate</Field>
            <Field>DataDate</Field>
            <Filter>Id = 'EC00515'</Filter>
        </ReadProjects>
    </s:Body>
</s:Envelope>
This request pulled the project from the second instance.
V/r,
Gene

How do i configure REGISTRY for enterprise services

Hi,
Please let me know how to Configure Registry for enterprise services in SAP Discover system V2.
Regards,
Naveen

I'm afraid it's a bit more complicated than adding a server into the list in Step 3 :)
When a DirectAccess client is connecting into a corporate network that is IPv4 (I assume yours is, most are), it can reach into your IPv4 servers because the DA server is doing NAT64/DNS64 translations, turning all of your DirectAccess IPv6 packets into
IPv4 packets before they head inside the network. But even though this happens in the background without you really knowing about it, the key thing there is that all DirectAccess traffic is IPv6. This means the clients can only be contacted via IPv6. If you
have IPv6 inside your network, then you can route outbound fairly easily to your DA client computers. If you are all IPv4 inside as most companies are, then you have to either roll IPv6 out inside your network, at least partially, or you have to utilize ISATAP
inside your network in order to create a sort of "virtual IPv6 cloud" that runs on top of your IPv4 internal network. This enables your internal management systems (like the BMC servers and helpdesk computers for RDP access outbound) to have a connection
into the IPv6 world, which then enables them some routing capability to get out to the IPv6-connected DA clients. In addition to this IPv6 or ISATAP setup, you also need to configure WFAS rules on the DA clients so that they will allow this traffic.
There is some info on setting up ISATAP here: http://blogs.technet.com/b/jasonjones/archive/2013/04/19/limiting-isatap-services-to-directaccess-manage-out-clients.aspx
Otherwise one of the chapters in this book is also dedicated to the setup of a selective ISATAP environment, to be used for the purposes of DirectAccess outward management: https://www.packtpub.com/virtualization-and-cloud/microsoft-directaccess-best-practices-and-troubleshooting

How to configure proxy services in OSB for Rest based services?

how to configure proxy services in OSB for Rest based services implemented using Jersey (Rest).
The Client need to contact OSB proxy servies by posting application/xml using jersey client and OSB proxy service will call the OSB business service.
i would like to know how to get this request in OSB proxy service and send it to the business service and get the response back.

I would suggest you refer to the below links:
https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
https://blogs.oracle.com/jamesbayer/entry/using_rest_with_oracle_service
Hope this helps.
Thanks,
Patrick

How to configure ACS 5.2 for policy condition on TACACS+ Service

In https://supportforums.cisco.com/message/3953175#3953175 thread, I was able to get the ACS 5.2 work with SRX for both SSH CLI and J-Web TACACS+ accounts. However, I found the behavior is different on our production environment. I found our ACS 5.2 was configured authorization rule with condition "TACACS+ Service" = "junos-exec". I don't know how to configure this on my ACS 5.2 Please guide me how to configure this.
I found there was NO TACACS+ "Authorization Request" when access via J-Web in our production SRX and ACS. However, there were TACACS+ "Authorzation Request" when access via J-Web in our production SRX and ACS. The difference between my lab ACS and production ACS is the authorization rule condition. In my condition, I configure with all "SRX" Device Type. but in our production ACS 5.2, it was configure to TACACS+ Service=junos-exec. so I like to test it in our lab to find out the difference. Thanks.

I would suggest you to go through the below two link.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/migration/guide/Migration_Configure.html
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/common_scenarios.html

How to configure solution manager service desk knowledge base for customer?

Hi Expert,
How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Please advice,
Thanks
regards,
ng chong chuan

>
Chong Chuan Ng wrote:
> How to configure u201CSolution Manager Service Desk Knowledge Baseu201D to allow Customer to check on the solution?
>
> Can we make the Solution Database open for the key user? Can we add one link in the workcenter and the customer can search existing solutions before they create message to us?
Hi,
It's a good idea, but currently it's not yet supported.
In Work Center, there is no predefined (nor a hidden) link shipped by SAP to access the Solution Database for key users.
With a future EhP for Solution Manager, you might get an integration of the Solution Database into the message processing Web UI.
Best regards,
Ruediger

How to configure windows services alerts in SCOM 2012 for all agent servers. For eg, Terminal Services, Netlogon, RPC etc..

Hi,
I need to configure different windows services alerts in SCOM 2012. Below are some of the windows services I need to monitor through SCOM.
Serivce: Windows Management Instrumentation
Service: Netlogon
Service: Remote Procedure Call (RPC)
Service: Server Service
Service: Terminal Services
Service: Windows Time
Service: Workstation
Service : WWW Publishing Service
Could some one please assist or share me the details, how to configure these services for windows agent servers.
Thanks..
Regards, Rajeev Parambil

Hi,
A certain set of services are monitored by default on all agents:
DNS Client
DHCP Client
RPC
Workstation
Server
For all the other services you could create a service monitor.
A nice blog series outlining this process can be found here: http://www.bictt.com/blogs/bictt.php/2011/03/16/scom-monitoring-a-service-part1
It's doing common things uncommonly well that brings succes. Check out my SCOM link blog:
SCOM link blog

How to configure links in My Services Lane

Similar Messages

Maybe you are looking for