How to Configure the system to use an firm's accepted warning banner in 10g

Hello.
I need to configure the system (oracle 10.2) to use an firm's accepted warning banner. I was able to do it in version 11 by putting entries in sqlnet.ora file. It then displayed when connectting as user (sys, system). I tried the same with 10.2 version and it doesnt display. Do i need to do anything different in 10g. I could not find the lead on googling it.
I used theses entries in sqlnet.ora for 11g
SEC_USER_UNAUTHORIZED_ACCESS_BANNER = <path>\banner2.txt
SEC_USER_AUDIT_ACTION_BANNER = <path>\banner.txt
Do we have to do differenetly in 10g. please help
Thank you very much

maggie wrote:
Thanks for responding. Is there a way to create a banner in 10.2 version of oracle. I need to didpaly it as part of checklist i am working on for 10g.
ThanksUnfortunately, auditors and security nazis dream up "requirements" without ever considering the capabilities and limitations of the selected technology. A lot of these guys get their technical knowledge from American Airlines Magazine when they get tired of reading the SkyMall catalog.
Sometimes you just have to document the exception, get a manager's signature, and keep it on file.

Similar Messages

How to configure the MOSS Crystalreportviewer using ActivX

Post Author: dileepj
CA Forum: General Feedback
Hi
I am using the MOSS BO integration Kit, and have used the crystalreportsviewer web part. But I want to configure the web part to use the ActiveX component. I would like to get some pointers as how to configure the web part to use the activeX viewer.
Thanks in advance
Dileep Jose

how to access excel files using java.i know
jakaratapoi is support to access excel files
how?The home page for POI has all the how to's replied. :)
http://jakarta.apache.org/poi/hssf/how-to.html
http://jakarta.apache.org/poi/hssf/quick-guide.html

How to configure the system cache

I found that JS2E has this enhancement:
System Cache: Java Web Start now contains both system and user caches. The system administrator can now pre-load applications and shared libraries into the system cache so that multiple users can share the same resources.
Now how exactly do I pre-load applications?

Clearly the documentation of these two subjects needs to be addressed. I will try to get a compete "How to" document posted later in the month, meanwhile:
1.0)Enterprise Configuration Setup
To configure a system or enterprise configuration, you need to create a file called �deployment.config� and put it in the right place. Java Plug-in and Java Web Start will look for this file first in the directory it calls �deployment system home� , and if not found there, will look in lib directory of the JRE you are running Plug-in or Web Start from. The �deployment.system.home� directory is platform dependent. On unix, it is �/etc/.java/deployment�. On Windows it is <windows dir>/Sun/Java/Deployment.
If the file is in deployment.system.home, it will be used by all jres (only valid from 5.0 and up). If the file is not there, but in the lib directory of the jre, it will only be used when that Plugin-in or Web Start are launched from that jre.
The file contains is a java properties file, with only two possible properties in it: deployment.system.config, and deployment.system.config.mandatory. Here are two example deployment.config files:
deployment.system.config=http\://MyCompany.com/deployFiles/deployment.properties
deployment.system.config.mandatory=true
deployment.system.config=file\:/C\:/Program Files/java/jre1.5.0/lib/deployment.properties
deployment.system.config.mandatory=false
Note in both examples, the colon in a properties file must be escaped. This also applies to backslashes themselves in the examples below. This is a common problem.
The first example could be deployed by the admin in deployment.system.home, to require all jres used on this system to load the default and locked properties from the url before launching any Java Plug-in applet or Java Web Start application.
The second example could be deployed with the jre, with both deployment.config and deployment.properties
The deployment.properties file pointed to, can contain any of the properties that can be contained in the users deployment.property file (see list on http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/properties.html). They can also lock properties by listing the property key with �.locked� appended to it. Here is an example system deployment.properties file:
deployment.user.cachedir=D\:\\deployment\\cache
deployment.security.sandbox.awtwarning=false
deployment.security.askgrantdialog.notinca=false
deployment.security.askgrantdialog.notinca.locked
The first two properties are not locked. The use can change to use a different cache location, or turn back on the AWT Warning banner. The last property is locked. The user is not allowed to grant trust to applications who's jars are selfsigned (or signed with any root not in the rootCA certificate store, nor is he allowed to change this setting. The entry in the control panel for this property will be disabled, and any change made to the users deployment.properties file for this property will be ignored.
Now for system cache:
The system cache property is:"deployment.system.cache.dir". It can be set in either an enterprise or users deployment.properties file with:
deployment.user.cachedir=D\:\\deployment\\system\\cache
/Andy

How to insert the system date using PreparedStatement

How do I insert system date(from Orcale database) using
PreparedStatement. I am aware that that oracle has date
function 'sysdate' to retrieve the database current date.
How Do i use that in the following syntax?
Alertnative 1:
String inssql =
"insert into emp (empid, name, dept, updateDate) "+
" values (?, ?, ?, ?)";
PreparedStatement pstmt = conn.prepareStatement(inssql);
pstmt.setInt(1, 123456);
pstmt.setString(2, "Bougnon Kipre");
pstmt.setString(3, "Rare Species Depatement" );
pstmt.setDate(4, sysdate) // if this okay
pstmt.executeUpdate();
Alternative 2:
String inssql =
"insert into emp (empid, name, dept, updateDate) "+
" values (?, ?, ?, sysdate)";
PreparedStatement pstmt = conn.prepareStatement(inssql);
pstmt.setInt(1, 123456);
pstmt.setString(2, "Bougnon Kipre");
pstmt.setString(3, "Rare Species Depatement" );
pstmt.executeUpdate();

Hi,
The second alternative will be the best way.
Since the alternative 1 won't work. sysdate cannot be accessed
from java as a variable. Either use alternative two or create a
java.sql.Date and insert it.
Regards
Elango

How to setup the system monitoring using sol man ?

Experts
can any one advise me how to setup the below monitoing.
Background jobs (SM50)         - Long running jobs >24hrs
Email/Fax transmission(SCOT) - alert if there is any failire/errors in the email transmission
iDocs Processing(WE05)          - Data Transfer failure
Enque locks (SM12)         - alert if there are any Lock entries which are older than 2 days
Update Records(SM13)         - alert if there are any update request older than 90 days
Regards
Karthi

Hello Prasad
Thanks a lot your information. I wil go thorugh the documents which you have mentioned.
I have configured few alerts and unfortunately I am still struggling to configure these alerts. I am also not able find whether I will be able to configure these alerts are not. Any advice/tip would be a great help.
if I get some solution, definately I will share with all.
Regards
Karthi

How to configure the system log on Mac OS X???

Now the system log is removed one week after the creation but I need to store it permanently.
How to do it??

Eugene Mirgorodskiy wrote:
Now the system log is removed one week after the creation but I need to store it permanently.
It's not really "removed". The system log is "rotated" out, at least partly to avoid having it grow too large. The older log information is in a series of files named like "system.log.0.bz2, system.log.1.bz2, etc. A file of type ".bz2" is a particular type of compressed file. Eventually the oldest of those files will be deleted. If you want to keep those forever, I'd copy off the oldest of those files on a regular basis to some other location.

How to configure the combobox while using connecting throught the remote URL.

I am using the combobox in the server for the selection of process stages and is working fine.
Now I want to connect the combobox through the remote URL connection of my client system. So that it will be updated simultaneously in client and server.
While connecting through the remote URL it is giving the message the to enter the value property.
I am not able to understand what value is to be entered in this option.
Please advise the solution at the earliest.
Best Regards,
Naresh Saini

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

How to configure the Business Systems & Technical Systems into PI 7.0

Dear All
Kindly let me know how to configure the Business Systems and Technical Systems into PI 7.0
any word document/PDF would be very helpful.
Regards
Blue

Hi ,
You have to do the configure/creation of the Business Systems & Technical Systems in SLD.Generally this is maintained by Basis team in the Project.If you are looking to learn how to create BS and TS in SLD
You can find some useful information here on SLD concepts and creation of SLD
http://wiki.sdn.sap.com/wiki/display/XI/WorkingwithSystemLandscapeDirectory+%28SLD%29
Please refer this document for more understanding of SLD
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b00462bb-b7a0-2a10-8da6-f6b89834f8b4?quicklink=index&overridelayout=true
Regards,
Srinivas

How to load the boot menu using the command line , after the configuration change ?

how to load the boot menu using the command line , after the configuration change ?

Hi @Bask-48
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp you are trying to change the boot order. Here is a link to Configuring the Boot Order in the System BIOS
that will assist you.
Good Luck and Happy Holidays!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (ex., 5 min) using the SLA?

I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability

Hey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris

How to configure the use of WS-RM in "PI 7.11 EHP1?

How to configure the use of WS-RM in "PI 7.11 EHP1?
Currently in the editing window of the communication channel (adapter type WS), I can not see any options regarding Reliable Messaging protocol (WS-RM).
The scenario that is required is as follows.
(Consumer WS-RM) -> (Provider WS-RM PI 7.11 EHP1) -> (ABAP Proxy Backend NW 7.0)
I would greatly appreciate any help,
Thanks,
Roger.
Edited by: Roger Solano on Apr 7, 2011 10:31 PM

WS adapter supports WS Reliable Messaging. But WS adapter is used to communicate between two SAP web service runtime.
Check this blog and its links for understanding direct connection or point to point communcation using WS adapter
/people/william.li/blog/2008/02/13/point-to-point-connection-using-abap-in-sap-using-pi-71
Hoe that helps.

How to retrieve the system used in an iview?

hello,
i'm currently having trouble retrieving the proper attribute of an iview to retrieve the system used by it.
it seem like the strings identifying the system in the iview differ in some iviews.
using either:
myIView.getAttribute(IAttriView.PORTAL_SYSTEM)
or
myContext.getAttributes("").get("System").get().toString()
produce errors.
while get("System") sometimes provides the correct system alias the attribute is none existant for other iviews where the string would be "Systemalias".
IAttriView.PORTAL_SYSTEM doesn't seem to work at all.
i did implement fail safe code if the attribute isn't present, however i don't know how to retrieve the system attribute without doing a case switch or something similar for all the different strings, which i would prefer not to do.
also, is there an easy way to retrieve all iviews which use a specific system without parsing the whole pcd and checking the attributes?

Prerequisite : Create the System Alias for the systems used in the application.
Use the below code to retrieve the system details:
        HashMap mapattr = new HashMap();
        HashMap map = new HashMap();
        IUser user = WDClientUser.getCurrentUser().getSAPUser();
        IPrincipal principal = (IPrincipal)user;
        ArrayList list = UMFactory.getSystemLandscapeWrappers();
        ISystemLandscapeWrapper systemLandscape = (ISystemLandscapeWrapper)list.get(0);
        //Portal System ALias name
        ISystemLandscapeObject landScapeObject = systemLandscape.getSystemByAlias("<system alias name>");
        IUserMappingData userMapping = (IUserMappingData) UMFactory.getUserMapping().getUserMappingData(landScapeObject,principal);
        userMapping.enrich(map);
        mappedUserId = map.get("user").toString(); // String "UserId"
        mappedPassword = map.get("mappedpassword").toString(); //String "Password"
     catch(Exception e)
          e.printStackTrace();
          wdComponentAPI.getMessageManager().reportException("Exception during retrieving the User Details - " + e.getMessage(),true);
Thanks & Regards,
Amar Bhagat Challa

When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it. Any ideas on how to get the system to read the iPad?

When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it. The iPhoto window opens up and reads the photos on the iPad, so it is connecting to the computer. Earlier today I wasn't having any problems. I have shut down the iPad and the computer and started over, but that didn't help. Any ideas on how to get the system to read the iPad so I can update the apps on it?

Hi, is the problem just to update your apps on your iPad? Here is what you should check. Is the iTunes on your computer updated to the latest version? Does your iPad needs to be updated? Do you have enough storage on your iPad to do the update? On your device is your iCloud back up checked?
Go to Settings - iCloud - Backup/Storage - see if its checked, and try unchecking it before connecting it to the computer.
Please let me know if you need any further assistance.

How to recover the system using recovery disc

please tell me the steps to perform the system recovery using the recovery disc.
my notebook model i hp pavilion dv-4 5009tx

Hi:
Please read the info at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&cc=us&dlc=en&lc=en
Paul

How to configure the runtime and consolidation for a track in CMS.

How to configure the runtime and consolidation for a track in CMS.
I can see the track exists in CMS but the same doesnt pull up in the NWDS in the development configuration perspective.
I compared the given track with the one which gets pulled up in NWDS. Theres something called runtime system and consolidation which isnt defined for the track which is invisible.
Please advise , what are these required for. And how can we configure the same.

The runtime systems are defined for a track to setup the Transport path for any code changes....the Consolidation system is usually defined as a Virtual system for the track and used for comparison and fixing any broken or Dirty DC's ....that means it's not used as a Runtime System for Deployment as compared to DEV,QAT and PROD used for Deployment...
Hope it helps..
Regards,
Shikhil

How to Configure the system to use an firm's accepted warning banner in 10g

Similar Messages

Maybe you are looking for