How to connect connect server through FTP?

hi all,
i am new to FTP protocol. i want to develop a program using FTP. can any one give me a correct suggestion or give me correct link for my reference or if u have any code then pls give me that code.i want to connect with intranet server.i had tried many ways but i cant connect to the server. pls help me.........

randy_ortan wrote:
i want to develop a program using FTP.Sorry, does this mean "I want to use FTP to develop a program" or does it mean "I want to develop a program that uses FTP"?
Assuming the latter, I agree with Chester, just download Apache Commons Net and use that for your FTP client.

Similar Messages

  • How to access file server through ethernet BUT internet though wireless

    I'm looking for a way to to run my file server network through ethernet while internet access is provided though wireless, but don't want users to have to switch off the wireless when they want to access the file server.
    File server is set up at trade shows and the conventions charge a fortune for internet access for multiple users and even more ($6000) for a connection that I'm allowed to put a router on. So I'm considering running my apple router for the file server network without internet access and just having my staff get their internet access from the cheaper wireless access the convention center has throughout the building.
    Problem is that I need them to be able to access the file server and the internet at the same time without switching back-and-forth from either network.
    Any suggestions? File server and all clients are macs.
    Message was edited by: Road Show

    Hello,
    Here are some good articles for this topic, please see:
    sql server connectity over the internet:
    http://www.codeproject.com/Questions/433687/sql-server-connectity-over-the-internet
    How To Connect SQL Server Through Internet:
    http://www.youtube.com/watch?v=VOUDdUJ5BLY
    Regards,
    Elvis Long
    TechNet Community Support

  • How to create a server through WLST  ( Weblogic Scripting Tool ) ?

    How to create a server through WLST ( Weblogic Scripting Tool ) ?
    Thanks in advance...
    Sanjay

    Hi Murugesh,
    Thanks a lot for you reply..
    I was able to create a server using create(). Is it possible to clone a server ?
    When i create a server following tags is added to config.xml
    <server>
    <name>testServer_lab1</name>
    <listen-port>43000</listen-port>
    </server>
    And if i do a clone through admin console, following is added to config.xml
    <server>
    <name>testServer2_lab1</name>
    <machine xsi:nil="true"></machine>
    <listen-port>7001</listen-port>
    <cluster xsi:nil="true"></cluster>
    <listen-address></listen-address>
    <graceful-shutdown-timeout>120</graceful-shutdown-timeout>
    </server>
    If incase, cloning is not possible through WLST, can i add following
    <machine xsi:nil="true"></machine>
    <listen-port>7001</listen-port>
    <cluster xsi:nil="true"></cluster>
    <listen-address></listen-address>
    <graceful-shutdown-timeout>120</graceful-shutdown-timeout>
    under <server> tag which is created through WLST ?
    I am using 9.2 version.
    Regards
    Sanjay

  • Can't connect to Server through NAT

    Hey all.
    So, I'm trying to connect to my 10.8 server from outside of my network using Server.app.
    On my local subnet, I can connect fine with my normal user.
    From anywhere outside of my local network, all I get is a shake from the login dialog (which is pretty meaningless).
    Since I'm using NAT, I've forwarded 311/TCP and 311/UDP through to the server host.
    When I telnet to my server on 311 I get a connection, so the traffic is getting through NAT (at least the TCP traffic).
    The only indication of a problem I get is a terse log entry on the machine I've attempting to connect from:
       Server: Failed to authenticate to OD
    I'm using the same credentials I use through Server.app when on the local subnet, so something else is happening.
    I do get a certificate warning, which I check off so that I always trust it. I can use the same hostname on my internal and external zones, but the IP resolves back to
    Does OD require some additional configuration for requests from outside the local net?
    Is Server.app just flawed?
    Does this somehow have to do with DNS?
    Any ideas?

    Server app communites over TCP port 687, not 311.
    That being said I wouldn't port forward server administration traffic to your server. A better approach would be to make a VPN connection first and then do whatever task you're trying to do after that.
    Source: http://support.apple.com/kb/TS1629?viewlocale=en_US&locale=en_US

  • Cannot File share or connect to server through VPN.

    I used to connect to my work server through VPN. During September through December of last year, I had no problem connecting to the server, but I could never file share. A few weeks ago I tried connecting again but I can't. The VPN connection is fine, and there's no problem with the server, but I can't connect to it. I'm pretty sure I haven't changed any of my network settings.
    Any Ideas??

    Just thought I would give this a bump. I recently transferred over to a new computer (I did not import/migrate settings, I reentered them. No longer can I VPN into work. Running 10.5.7 I have entered in the correct DNS settings and the domain. No errors, it says I am connected but I cannot contact any servers or file share. Any thoughts?

  • I want to use Connect to Server an FTP account, but make it writable

    I have an FTP account through my .com.au domain.
    My aim: to use the large online storage 'cloud' as if it were any other readable/writable folder on my computer.
    I set up Automator to automatically connect to the server. However, the server is readable only. How can I adjust it to make this Server connection writable?
    Also, I know Cyberduck can let you mirror a folder on the FTP with a local folder. Can I somehow use this to update such a mirror every 30 mins or whatever?
    Any other solutions, please let me know.

    You cannot write to an FTP server via the Finder. You can only read.
    You'll have to use another FTP client to write.
    Also, either use SFTP (secure FTP) or don't pass any sensitive information to your 'cloud.' FTP passes usernames and passwords in the clear. I imagine the data transfer is unencrypted, also.

  • Connect SQL Server through DBCO - DBCONNECT

    Hi Guys,
    I am trying to connect to one of the SQL Server in my Domain. I have made entries as mentioned by SAP note in DBCO Transaction. When I am testing connection through program 'ADBC_TEST_CONNECTION' it is showing me following error:
    Testing a Database Connection Defined in DBCON
    Could not open connection SQLCONNECTION
    sql error          1- occured:
    I have already installed DBMSSSLIB.DLL in executable directory also.
    Please advice.
    Thanks,
    Usman Malik

    Hi,
    As mentioned I have put these files i.e. DBMSSSLIB.DLL and DBMSSSLIB.PDB (64bit) in the following directories and restarted the server:
    X:\usr\sap\SID\D*\exe
    X:\usr\sap\SID\sys\exe\run
    X:\usr\sap\SID\sys\exe\ (i386 or ntamd64) \ (nuc or uc)
    tried again but still it is showing the same error when i execute ADBC_TEST_CONNECTION program in SE38:
    Testing a Database Connection Defined in DBCON
    Could not open connection ABC
    sql error          1- occured:
    SQL Server is Standard Edition and OS is Windows 2008 R2 64bit. Our SAP Server is also Windows 2008 64bit.
    Please advice what to do now because I have done entries in DBCO Transaction correctly as mentioned by the note 178949 i.e.
    CON_NAME: <my_conn_name>
    DBMS: MSS
    USER_NAME: <db_user>
    PASSWORD:  <password>
    CON_ENV: MSSQL_SERVER=<server_name> MSSQL_DBNAME=<db_name>
    I am using SQL Server Administrator Username/Password to connect to this Server.
    Thanks,
    Usman Malik

  • Can't connect sql server through static ip

    i am using sql server but before installing a fresh window recently i can connect my sql server as my static ip as a server name. but after installation i can't connect .. how can i do so.. 

    Just for clarification, it sounds like you had SQL Server installed on your computer and that you had to reinstall Windows for reason and reinstall SQL Server again, now you are having problems connecting? 
    Can you tell us which services you installed (i.e., Database Engine, Reporting Services, Analysis Services), the version/edition you are working with, and which service is causing you problems?  Also, how are you attempting to connect? From the computer
    its installed on, or remotely from another computer? Which version of Windows are you working with?

  • Cannot connect to Serv through my computer's Oracle SQL Developer client.

    Connection issue:
    When I try to connect to the server , I receive the following message:
    “An error was encountered performing the requested operation:
    IO Error: The Network Adapter could not establish the connection
    Vender code 17002”
    The odd thing is that I am able to connect through the Citrix SQL Developer using the same settings. My internet connection is working fine, and I am not connected to a VPN.
    Please assist me.
    Thanks,
    Vas

    905508 wrote:
    Connection issue:
    When I try to connect to the server , I receive the following message:
    “An error was encountered performing the requested operation:
    IO Error: The Network Adapter could not establish the connection
    Vender code 17002”
    OS/Networking mis-configuration!
    Oracle is the victim; not the culprit.
    Root cause & fix are external to Oracle.
    Is any type of OS Virtualization involved here?

  • Communication with the  Idoc file with is server through FTP (TCP/IP)

    Hi All,
    My file which is stored in the directory of the SAP server.
    In this file Sales order data is stored in the IDOC format.
    I have to devlelop a interface which which communicate with Server (where IDOC file is stored) with FTP using TCP/IP.
    Is there any sample code is there.
    Thanks in advance .
    Point guranted .

    Hi,
    Check this links out
    Using of FTP_CONNECT
    FTP_CONNECT
    FTP_CONNECT
    Regards,
    Samson Rodrigues.

  • Fetching Idoc file from server through FTP using TCP/Ip protocol

    Hi All,
    My file which is stored in the directory of the SAP server.
    In this file Sales order data is stored in the IDOC format.
    I have to develop a interface which which communicate with Server (where IDOC file is stored) with FTP using TCP/IP.
    Is there any sample code is there.
    Thanks in advance .
    Point guranted .

    Hi,
    Check this links out
    Using of FTP_CONNECT
    FTP_CONNECT
    FTP_CONNECT
    Regards,
    Samson Rodrigues.

  • Connecting server through internet connection

    Hi
    I want to connect my server through internet connection. Could anyone help me out how to do this?
    MAK

    hello mortoza,
    Remember these things..
    The database server should be connected to the internet directly..
    the database server should be having a public ip address to identify it uniquely in the internet..
    you can then connect to the database from any application by using jdbc and providing the ip address and port of the DB server in the url as suited for your jdbc driver....
    hope that was helpful,
    -Jer
    Hi, please find required information
    -Connection for Application.
    -For example, to connect mySQL database running at a
    Unix Server in USA from EC
    -Simple network connection, not web server
    Any one can help?
    Regards,

  • Cannot Connect to Server OSX 10.8

    Please be patient, I am new to server administration.
    I had set up a Mac Mini (mid 2011) running lion and lion server as a home server for Time Capsule, file sharing, and itunes home sharing.  Everything worked fine In April.
    It seems a system update knocked the server off and I could not connect to it.  (ARD or VNC).  I checked forums and tried a bunch of things, but could not get it working.  Hoped Mountain Lion would fix it, but it did not help.
    Cannot connect to server through VNC or ARD.  (Can connect from server to laptop, but not laptop to server).  Cannot connect to server through Finder (afp://with ip address) or just connecting to shared file location on the Finder.  All things I had been able to do.
    Time Machine on my laptop cannot see the Time Capsule set on my server.
    Currently running Mountain Lion with OSX Server 10.8.  File sharing turned on in server settings and also in the sharing settings under my preferences.  Remote management turned under sharing settings also.

    So I verified the computer firewall was turned off.  Then I turned off the server firewall settings through the command line, restarted the computer, and the server was available to control under ARD and VNC.
    I am going to update my data files, then make a bootable copy.
    Thank you for reminding me to doublecheck the firewall. 

  • BO-Cannotconnect to Mobile server through Blackberry[InvalidCredentials]

    Subject:-BO-Cannotconnect to Mobile server through Blackberry[InvalidCredentials]
    Hi,
    We are getting an error while trying to connect mobile server through blackberry hand held devices. the error comes out as "Invalid Credentials" or "Network Unavailable" or "Request Timedout"; hv changed the passwords for the userid several times but it's not hitting the server. Thesameconfiguration isworking perfectly with the Simulator.
    Kindly provide the solution at earliest.
    Regards,
    Subhrajyoti Das
    9920594288

    Hello Subhrajyoti Das  , I have the same problem.
    it occur on BB 9700 Docomo simulator
    I need help from you as you working perfectly with the simulator.
    Would you mind send me VAS-server.config VMS-server.config
    VAS-cluster.config VMS-cluster.config and capture screen of your connection setting in the simulator. ?
    I working on these problem about a week. I will appreciate you so much for helping me.

  • How to track IP's of clients connecting to DB server through Apps Server

    My Application server address is like http://192.220.0.75:7779/forms90/f90servlet form=TEST.fmx&userid=@abc
    I can connect to Apps server from any computer using explorer with this address .
    for auditing when I connect to db server through Apps server then my audit table detect only server IP- 192.220.0.75 each time but when I connect by oracle DS or toad then my audit table detect each computers defferent IP address.
    how can I detect different users and IP addresses connecting to database server using apps server instead of apps server IP?

    You can try to use WebCache event_log, this one will show your clients IP or you can uncomment UseWebCacheIP ON in httpd.conf file, so you ensure that the access_log show the ip of the user and not of the server.
    Greetings.

Maybe you are looking for