Not getting correlation exists exception

Hi,
SOA Suite 11.1.1.6, BPM project
I have created a test project with one BPM process with one human task. I have created a correlation from the string (also tried with int) argument passed in and when I test it allows me to create 2 instances with the same correlation id. I would have expected the second to fail with a CorrelationException but both instances get to the human task fine. Steps I took :
1. Create async simple BPM process with one string input argument.
2. Add a human task
3. Map the input argument on the start activity to a correlation (the key and property of which are created at the same time)
(To do this I set the alias of the correlation property to the input argument)
4. Deploy and go to Enterprise Manager
5. Test, setting the input argument to 123
6. Test again, setting the input argument to 123
7. Both instances reach the human task fine.
Am I expecting the wrong outcome or have I configured something wrong ?
cheers
Tony

You need to install the DOD CA-21 and DoD Root CA 2 certificates to access that website.
*http://dodpki.c3pki.den.disa.mil/rootca.html
*http://militarycac.com/dodcerts.htm

Similar Messages

Data is not getting displayed after Exception,mysterious cause?

Hi, Good Afternoon all,
I'm Kittu. I have got a peculiar problem(it seems peculiar atleast to me) in my application, i donno whether it is programmatic error or problem with the environment that i'm using.
In my application,I'm using java with NetBeans 5.5.1(Server being Tomcat). Problem is : once I get certain kind of exceptions in 'Bundled Tomcat(log)' window of Netbeans output, all the data and content that generally gets displayed in 'Bundled Tomcat' window of NetBeans output.(Note that these two are different windows) , gets erased and no more displaying is happening. Dont know what must be the problem. Please, if anybody knows the cause of such situation, DO RESPOND. I'll be waiting for your replies.Thanx in advance.
---Kittu.

It's likely what'd confusing you is the way Netbeans automatically switches between tabbed windows in the Output area at the bottom of the window.
There's a variety of windows to look at (especially when running a server), but it only shows one at a time, and will switch to the one with the latest output. To see the window you were previously looking at you'll have to switch back by clicking a tab.

Process not getting correlated and going into manual recovery stage

Hi
I have developed a bpel process which implements correlation. I have unit tested it and is working fine. But am encountering issues in case of load.
The process which should correlate to the running process is going into manual recovery and the correlation is not happening. Whenever is restart the managed server, and then recover the instance things are getting completed and correlation is happening.
Can some one suggest what might be the problem in this case
Thanks in advance

Sumit,
This occurs because your process has not dehydrated to the dehydration store yet.
The process has not failed but it is waiting for a response from some partner link in your BPEL process. This can be common when calling async ESBs and the ESB fails.
To try and debug this you will need to look at the domain.log and see if any error is generated. Have a look at your BPEL process and see what partner link cal cause a failure yet not send a response back.
Is the DB adapter the only partner link or are there others?
cheers
James

Weblogic./SOA server not getting started-BPEL Exception @ startup

Hi All,
Environment:
Weblogic /SOA 11.1.1.4 is installed on my Windows machine with 3GB RAM.
I installed the development mode and i have not configured my node manager.I just used to start the admin server and it automatically starts the managed SOA server.May be this is a new feature with 11g.
The server was running fine till last week and i was doing my SOA practice as per 'SOA Getting Started ' book.But today morning when i restarted my system and started the server,i am gettign the below error:
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4281)
at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:67
9)
at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(Deliver
yService.java:654)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDe
liveryBean.java:293)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJo
inpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocatio
nInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.
java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:31
3)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUt
il.java:413)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor.runJaasMode(JpsAbsInterc
eptor.java:81)
at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsIntercep
tor.java:112)
at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.ja
va:105)
at sun.reflect.GeneratedMethodAccessor839.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJo
inpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorI
nterceptor.invoke(JeeInterceptorInterceptor.java:69)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntrodu
ctionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntrodu
ctionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisit
orImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.c
allback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentIntercepto
r.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocat
ionInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntrodu
ctionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntrodu
ctionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMetho
dInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopPr
oxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy281.handleInvoke(Unknown Source)
at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDe
liveryLocalBeanImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(Sess
ionLocalMethodInvoker.java:39)
at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDe
liveryLocalBeanImpl.handleInvoke(Unknown Source)
at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage
Handler.handle(InvokeInstanceMessageHandler.java:35)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:140)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:619)
>
<Apr 27, 2011 12:04:34 PM AST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
0000> <Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.invoke.InvokeInstanceMessage"; the reported exception is: Fault not hand
led.
failure to handle a fault thrown from a scope, by any blocks in the scope chain.
This exception occurred because the fault thrown in the BPEL flow was not handle
d by any fault handlers and reached the top-level scope.
A top-level fault handler should be added to the flow to handle faults not caugh
t from within the flow.
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
ORABPEL-05002
Message handle error.
error while attempting to process the message "com.collaxa.cube.engine.dispatch.
message.invoke.InvokeInstanceMessage"; the reported exception is: Fault not hand
led.
failure to handle a fault thrown from a scope, by any blocks in the scope chain.
This exception occurred because the fault thrown in the BPEL flow was not handle
d by any fault handlers and reached the top-level scope.
A top-level fault handler should be added to the flow to handle faults not caugh
t from within the flow.
This error contained an exception thrown by the message handler.
Check the exception trace in the log (with logging level set to debug mode).
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:207)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
hTask.java:88)
at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
k.java:64)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:619)
Before this error,I am able to see'STARTING' message from admin server but after sometime i get the below error.I waiting for 30 minutes and tried to access the console but no use.
I beleive ,this error is coming from one of the bpel components before i restarted my machine.is there any way to undeploy all my instaled SOA composite projects offline.Because,i am not able to start the server and i get this error at the server start up itslef.
Thank you for your time and kind help !!
Regards,
Karthik B
Edited by: Karthik Balakrishnan on Apr 29, 2011 1:42 PM

Generally this error should not stop server. Carefully check the server startup log and see if there are other errors as well. Post them here. You may consider mailing your server startup log to my id.
Regards,
Anuj

XL Reporter not getting any data

Hi
When I am using XL Composer and generating report using it, I am getting data what the fields I have dragged. Not getting any data when generating same report in organizer from composer except the Title field names. Before I got but now I am not getting.
STEPS Taken
 XL Reporter Composer Tool bar
 Generate
 Generate(Window)(Name: given Sample & checked Generate report then ok)
And having another problem when generating sample reports I am getting data and when editing that report are preparing new with some fields, I am not getting any data.
Example: I have made Edit of Bank Book and placed extra field Document No, saved the report and generated I am not getting any data except titled fields.
 In new report I have taken BP Code and sales Employee I am not getting any data.
Please Can any one help me, It is urgent.
Thanks in Advance.
Urs
Sindhu

If you did not select any "total" field (quantities, totals, etc), XL Reporter will show data only at report composer. It will not work at final XL Report itself.
This is a normal behaviour of XL Reporter, unfortunetaly.
If you are trying to create a simple list of records, I suggest to use Query Generator, combined to PLD in order to get a formatted report.

TS4002 I had 2 iCould Accounts - one on MacBook Pro and one on iPad - long story. I changed the one on my iPad to sync with laptop. Now I can not get my iCloud mail on my iPad since it only want to set up a new one, not my existing one. How do I fix it

Hi:
I had two iCloud account - one on my iPad set up with Me.com. Its a long story as to why I had two account which I will not the issue. I changed my iPad account to link up with my MacBook Pro account - which is my primary account. After doing this all seemed OK except I could not get y primary iClould email account set. When I tried to add my primary iClound email account it only allows you to add a NEW iClould account which is not what I want.
How do I correct this issue? Thanks.

Thanks Winston but your solution did not work. In my iCould account everything works except Mail - that being contacts, calendar, reminders, etc. When it comes to mail it is currently OFF. When I turn it ON, it states that I need to create a NEW free iClound account, and allowing me to establish my existing account.
When I tried your solution, it stated that the account already exists but in reality it is not on my iPad.
Any more thoughts?

IMS-exception type "Other errors" is not getting triggered

Hi experts,
                 I am trying out some scenarios in IMS. I want to check exception type- "Other Errors" which is a most generic exception type. I have tried many options like- removed country from partner id address, tried posting invoice after removing account assignment category but for all these invoice triggers exception- duplicate invoice which i am unable to understand. can anybody please tell me what are the settings required for exception type- other errors?
2. I even tried exception type "missing goods receipt". Excption type is getting triggered but after creation of confirmation- the status of the exception is not getting changed to clarified. Instead it gives an error- User is locked please try after some time.
Please help
Regards
Kapil

Hi Friend,
Please read the possible exception types in IMS
Have you set these exception in Settings for Invoice Monitor
Purpose
In the Settings for Invoice Monitor application, you can make settings directly on the user interface for every exception that you wish to adjust.
Digital signature
For each exception, you can define whether you want to use a digital signature.
If you use a digital signature, the field Digital Signature is active on the Adobe PDF form and the processor of the form has to sign it before sending it back.
The system then checks that the signature is valid.
If the signature is invalid, or the processor does not sign the form, an error message is written to the log and the e-mail is closed.
You can assign a digital signature to a vendor in two different ways.
·        The user assigns a partner certificate and sends it to the vendor.
·        The user uses the vendors signature certificate. This certificate has to be registered on the ADS server. For more information, see the SAP NetWeaver Configuration Guide Interactive Forms based on Adobe Software on the SAP Service Marketplace under service.sap.com/instguidesNW2004s.
Additionally, you can make settings for the following exceptions:
   Invoice duplicate
This exception is triggered if you try to post an invoice that has already been posted. The two invoices are compared using criteria that you have specified. In the settings, you can define whether a notification e-mail is automatically sent in the case of an invoice duplicate exception, and to whom this e-mail is sent. Furthermore, you can tailor the duplicate check to suit your requirements. The following criteria are available:
    Consider special characters in the vendor invoice number
     Check the number of items and purchase order number
     Additionally, you can define that the invoice is automatically deleted as soon as the vendor confirms that a duplicate invoice exists.
¡        Fields for duplicate check
On this tab page, you can activate the fields that are relevant for the duplicate check. Furthermore, you can define a maximum variance for each field. In other words, you define whether the data in the fields should be an exact match, or whether small differences are acceptable.
¡        Exclude vendor values and or invoice values
On this tab page, you can exclude certain vendors and/or invoice values from the duplicate check. If, for example, you always receive invoices from one vendor for the same amount, you can enter this here so as to prevent unnecessary checks.
¡        Group vendors
On this tab page, you can group vendors that have several vendor numbers together in a data record to facilitate the duplicate check. Entries in this table cause an update in the TREX database which might lead to a short delay.
Regardless of your settings, the system performs a standard duplicate check (for vendor invoice numbers or vendor numbers that match exactly, for a +/- 7 day period) to ensure that these duplicates are found. If this standard check is not successful, a further check is performed using the settings that you made.
·        Missing external information
This exception is triggered if you try to post an invoice that contains incomplete or incorrect information. In the settings, you can define whether a notification e-mail is automatically sent in the case of an exception caused by missing external information, and to whom this e-mail is sent. Furthermore, you can define whether the e-mail contains a link to the SRM System, where the missing/incorrect information can be entered directly in an interactive form.
·        Missing internal information
This exception is triggered if you try to post an invoice that contains incomplete or incorrect information. In the settings, you can define whether a notification e-mail is automatically sent in the case of an exception caused by missing internal information, and to whom this e-mail is sent. Furthermore, you can define whether the e-mail contains a link to the SRM System, where the missing/incorrect information can be entered directly in an interactive form.
·        Missing goods receipt
If no digital signature is used, two additional fields are displayed in the PDF form. The processor has to enter his first and last name into these fields before he/she sends the e-mail back.
In the settings, you can define whether a notification e-mail is automatically sent in the case of an exception caused by a missing goods receipt, and to whom this e-mail is sent. You can define how long the invoice should remain with status 'Waiting for Preceding Documents' before it receives the status 'To be Corrected Manually. Furthermore, you can define how many days pass before an e-mail is sent to the goods recipient. When the goods recipient then confirms that no goods delivery has taken place, an e-mail is automatically sent to the vendor. If the goods receipt has already taken place, you can either define that the goods recipient confirms this automatically in an interactive form, or that the goods recipient uses a link in the e-mail to confirm the goods receipt in the SRM system.
·        Incorrect reference
This exception is triggered if you try to post an invoice that refers to an incorrect reference. In the settings, you can define whether a notification e-mail is automatically sent in the case of an exception caused by an incorrect reference, and to whom this e-mail is sent. Furthermore, you can define whether the e-mail contains a link to the SRM System.
·        Approval overdue
This exception is triggered if an invoice remains in approval status for longer than allowed. You can define how long an invoice can remain in approval status before the exception is triggered.
·        Other errors
This exception is triggered if you try to post an invoice that contains errors. In the settings, you can define whether a notification e-mail is automatically sent in the case of an exception caused by other errors, and to whom this e-mail is sent. Furthermore, you can define whether the e-mail contains a link to the SRM System.
Note that the invoice is checked in accordance with the vendor tolerance limits in the case of the following exceptions: If these are exceeded, an error message is output.
·        Price variance
This exception is triggered if you try to post an invoice that contains price variance that exceeds the tolerance limit. In the settings, you can define whether a notification e-mail is automatically sent in the case of a price variance, and to whom this e-mail is sent. You can stipulate that the invoice is posted automatically if the price variance is approved on account of the e-mail. Furthermore, you can define whether the e-mail contains a link to the SRM System.
·        Quantity variance
This exception is triggered if you try to post an invoice that contains quantity variance that exceeds the tolerance limit. In the settings, you can define whether a notification e-mail is automatically sent in the case of a quantity variance, and to whom this e-mail is sent. You can stipulate that the invoice is posted automatically if the quantity variance is approved on account of the e-mail. Furthermore, you can define whether the e-mail contains a link to the SRM System.
·        Tax variance
This exception is triggered if you try to post an invoice that contains tax variance that exceeds the tolerance limit. In the settings, you can define whether a notification e-mail is automatically sent in the case of a tax variance, and to whom this e-mail is sent. You can stipulate that the invoice is posted automatically if the tax variance is approved on account of the e-mail. Furthermore, you can define whether the e-mail contains a link to the SRM system.
In Invoice monito system pls check the what setting is done for Duplicate invoice, Missing GR and other invoice.
Based on these setting only system identifies what type of exception it is.
In other errors you should mention in Settings for Invoice Monitor what are the fileds your consider for other exception.
Hope this information will help.
Thanks & Best regards
Girish

HT4972 i am not getting notification on most of my apps, e.g twitter and facebook...except i go to the app and refreshed manually. its an iphone 4 and running on ios5...i have gone through everything and its still the same..help please........I seem to be

i am not getting notification on most of my apps, e.g twitter and facebook...except i go to the app and refreshed manually. its an iphone 4 and running on ios5...i have gone through everything and its still the same..help please........
I seem to be having the same problem on my brand new iPhone 4S. Everything was working fine on the phone until I updated to iOS 5.1.1, but now I no longer receive push notifications for the native Mail app, Instagram, or the Facebook app. I still seem to be receiving SMS texts and iMessages via push, but the aforementioned apps need to be opened before I can receive missed notifications (having them open in the background seems to make no difference).
Thanks for any help that you may provide!

did you try notifications under settings? You can customize it as per your requirement, for each application.
check this out: http://www.gottabemobile.com/2011/10/12/ios-5-how-to-use-notification-center/ or http://reviews.cnet.com/8301-19512_7-20120625-233/ios-5-notifications-a-deeper-l ook/

Getting error when view - Requested data type does not match with existing

I have the siebel web service
In the BI publisher as mentioned in the 'Siebel_BI_Publisher_Integration_Concepts.pdf', I have imported the siebel web service
BI can recognize the 'Web service' and methods.
I have created the paramters. The data type is 'String'
When I try to view the report using the BI publisher, I am getting teh following error in th UI
"Requested data type does not match with existing data type"
This is the first time I am using BI publisher to call the Siebel web service. I don't know what this error means
I don't know whether any log file generated wit the details of this erro message
Any help is much appriciated
Thanks,
Kavitha

Hi all,
have you find a fix for this issue? Im facing the same situation, using Complex type, and String data type both in the service and Bi publisher. We are consuming CC&B services, and we have noticed this error appears when BIPublisher is running on WebLogic (10.3) but it does not appear when BIPublisher is running on OC4J , of course running the same report on both application servers.
Any idea?
Thanks a lot, regards
Nestor

Java.lang.Exception: Could not get name for DC project

Hello Experts,
We have a code which is downloaded from SVN repository.
I have imported the code from my desktop into NWDS and when I try to deploy it throws,
java.lang.Exception: Could not get name for DC project
I have referred few threads in SCN and solution suggested is to change the workspace and create a new DC & copy the _comp from old DC.
I tried the above solution but there are lot of build errors as we have few RFC models and it is throwing build errors for missing model reference.
Kindly help me on how to fix the error.
Thanks, Swarnaprakash

Dear Swarnaprakash,
The Web Dynpro DCs Import C:\----\user\.dtc\LocalDevelopment\DCs\sap.com\test and
the related package for DC is missing once check it after try to import.
Depending on which Java compiler preferences are set, you may see some
warnings in the "Task" view after importing the project. If the severity level for problems of type "Unused imports" (set in Preferences – Java – Compiler) has the value "Warning", the compiler will issue a warning for unused import references. Ignore these warnings!
Still You getting means delete your .metadata before take the backup.after open the NWDS again it will set new configurations in your system.
Thanks & Regards,
Durga Rao.

How to handle "The specified resource does not exist" exception while using entity group transactions to purge WADLogs table

Hi,
We have a requirement to purge the Azure WADLogs table on a periodic basis. We are achieving this by using Entity group transactions to delete the
records older than 15 days. The logic is like this.
bool recordDoesNotExistExceptionOccured = false;
CloudTable wadLogsTable = tableClient.GetTableReference(WADLogsTableName);
partitionKey = "0" + DateTime.UtcNow.AddDays(noOfDays).Ticks;
TableQuery<WadLogsEntity> buildQuery = new TableQuery<WadLogsEntity>().Where(
TableQuery.GenerateFilterCondition("PartitionKey",
QueryComparisons.LessThanOrEqual, partitionKey));
while (!recordDoesNotExistExceptionOccured)
IEnumerable<WadLogsEntity> result = wadLogsTable.ExecuteQuery(buildQuery).Take(1000);
//// Batch entity delete.
if (result != null && result.Count() > 0)
Dictionary<string, TableBatchOperation> batches = new Dictionary<string, TableBatchOperation>();
foreach (var entity in result)
TableOperation tableOperation = TableOperation.Delete(entity);
if (!batches.ContainsKey(entity.PartitionKey))
batches.Add(entity.PartitionKey, new TableBatchOperation());
// A Batch Operation allows a maximum 100 entities in the batch which must share the same PartitionKey.
if (batches[entity.PartitionKey].Count < 100)
batches[entity.PartitionKey].Add(tableOperation);
// Execute batches.
foreach (var batch in batches.Values)
try
await wadLogsTable.ExecuteBatchAsync(batch);
catch (Exception exception)
// Log exception here.
// Set flag.
if (exception.Message.Contains(ResourceDoesNotExist))
recordDoesNotExistExceptionOccured = true;
break;
else
break;
My questions are:
Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
Would this logic fail in any particular case?
How would this approach change if this code is in a worker which has multiple instances deployed?
I have come up with this code by referencing the solution given
here by Keith Murray.

Hi Nikhil,
Thanks for your posting!
I tested your and Keith's code on my side, every thing worked fine. And when result is null or "result.count()<0", the While() loop is break. I found you code had some logic to handle the error "ResourceDoesNotExist" .
It seems that the code worked fine. If you always occurred this error, I suggest you could debug your code and find which line of code throw the exception.
>> Is this an efficient way to purge the WADLogs table? If not, what can make this better?
Base on my experience, we could use code (like the above logic code) and using the third party tool to delete the entities manually. In my opinion, I think the code is every efficient, it could be auto-run and save our workload.
>>Is this the correct way to handle the "Specified resource does not exist exception"? If not, how can I make this better?
In you code, you used the "recordDoesNotExistExceptionOccured " as a flag to check whether the entity is null. It is a good choice. I had tried to deleted the log table entities, but I used the flag to check the result number.
For example, I planed the query result count is 100, if the number is lower than 100, I will set the flag as false, and break the while loop.
>>Would this logic fail in any particular case?
I think it shouldn't fail. But if the result is "0", your while loop will always run. It will never stop. I think you could add "recordDoesNotExistExceptionOccured
= true;" into your "else" block.
>>How would this approach change if this code is in a worker which has multiple instances deployed?
You don't change anything expect the "else" block. It would work fine on the worker role.
If any question about this issue, please let me know free.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

A tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore)

a tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore) thanks

Just bridge the TC and plug it by ethernet into the main router.
Bridge in v5 airport utility.
In v6 it is under network.. change it from DHCP and NAT to Off bridge mode.
Turn off the wireless.

If I do NOT use any event, except AT SELECTION SCREEN, Do I get any issues?

Hi Experts,
Pls. let me know that, If I do NOT use any event, except AT SELECTION SCREEN, Do I/prog. get any issues? (am also using AT SELECTION SCREEN OUTPUT for list box preperation).
For some reason(execution of the report prog. with ENTER button), am using ONLY these 2 events.
For full detials, pls. see my other thread with title,
Is it possible to execute a REPORT prog. with pressing of ENTER button?
thanq

Hi
srinivas see this program
i am executing this program with out any event it is not showing any error but not giving output
when i put start-of-selection then it is showing output
*& Report ZNNR_REPORT33
REPORT ZNNR_REPORT33 NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
 MATNR LIKE MARA-MATNR,
 WERKS LIKE MARC-WERKS,
 PSTAT LIKE MARC-PSTAT,
 EKGRP LIKE MARC-EKGRP,
 END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
 EBELN LIKE EKKO-EBELN,
 EBELP LIKE EKPO-EBELP,
 MATNR LIKE EKPO-MATNR,
 WERKS LIKE EKPO-WERKS,
 LGORT LIKE EKPO-LGORT,
 END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X' user-command uc1.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
***********SCREEN MODIFICATIONS*******************
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
 SCREEN-INPUT = 0.
 MODIFY SCREEN.
 ENDIF.
 IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
 SCREEN-INPUT = 0.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
********END OF SCREEN MODIFICATIONS*****************
***************SCREEN VALIDATIONS *****************
at selection-screen.
SELECT SINGLE *
 FROM EKKO
 INTO EKKO
 WHERE EBELN IN S_EBELN.
IF SY-SUBRC <> 0.
 SET CURSOR FIELD 'S_EBELN-LOW'.
 MESSAGE E999 WITH TEXT-005.
 clear S_ebeln-low.
ENDIF.
********end of screen validation*****************
IF R1 EQ 'X'.
*ULINE AT /1(48).
 WRITE : SY-VLINE ,2 'MATERIAL NUMBER',
 21 SY-VLINE , 22 'PLANT',
 27 SY-VLINE , 28 'STATUS',
 43 SY-VLINE , 44 'GRUP', 48 SY-VLINE.
 ULINE AT /1(48).
ENDIF.
IF R2 EQ 'X'.
 WRITE : SY-VLINE , 2 'PO NUMBER',
 12 SY-VLINE, 13 'ITEM',
 18 SY-VLINE,19 'MATERIAL NUMBER',
 37 SY-VLINE, 38 'PLANT',
 44 SY-VLINE, 45 'GRUP',
 49 SY-VLINE.
 ULINE AT /1(50).
ENDIF.
start-of-selection.
*set pf-status '100'.
IF R1 EQ 'X'.
 SELECT MATNR
 WERKS
 PSTAT
 EKGRP
 FROM MARC
 INTO TABLE IT_PLANT
 WHERE WERKS = P_WERKS.
 LOOP AT IT_PLANT.
 WRITE : SY-VLINE , 2 IT_PLANT-MATNR COLOR COL_KEY,
 21 SY-VLINE , 22 IT_PLANT-WERKS COLOR COL_KEY,
 27 SY-VLINE ,28 IT_PLANT-PSTAT COLOR COL_NORMAL,
 43 SY-VLINE ,44 IT_PLANT-EKGRP COLOR COL_NORMAL.
 ENDLOOP.
ENDIF.
IF R2 EQ 'X'.
 SELECT EBELN EBELP MATNR WERKS LGORT
 FROM EKPO
 INTO TABLE IT_PONO
 WHERE EBELN IN S_EBELN.
 LOOP AT IT_PONO.
 WRITE : SY-VLINE , 2 IT_PONO-EBELN COLOR COL_KEY,
 12 SY-VLINE , 13 IT_PONO-EBELP COLOR COL_KEY,
 18 SY-VLINE , 19 IT_PONO-MATNR COLOR COL_NORMAL,
 37 SY-VLINE , 38 IT_PONO-WERKS COLOR COL_NORMAL,
 44 SY-VLINE , 45 IT_PONO-LGORT COLOR COL_NORMAL, 49 SY-VLINE..
 ENDLOOP.
ENDIF.
ULINE AT /1(50).
WRITE :/10 'PAGE NUMBER', SY-PAGNO, '/' ,SY-PAGNO.
ULINE AT /1(50).
WRITE :/10 'PAGE NUMBER', SY-PAGNO.

I am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution

i am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution

The ip-adress cannot be the same as your laptop. You have to make sure that your ip-adress is unique in the network. if your ip is 192.168.1.100 try 192.168.1.112 or somthing. More advanced is to check avalible adress in your router.

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/

Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
Airport gets it address DHCP.

Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
Note that the Express will not provide any additional wireless coverage when it "Joins".

Not getting correlation exists exception

Similar Messages

Maybe you are looking for