How to connect on distance to airport extreme

I cant connect in the office to my airport extreme @ home.
What sould I do?

First, if the office network is administered by IT folks, make sure that they have set things up to allow this type of connection. If they have a firewall set up to block these types of connections....very common....you can be doing everything right and it will still not work.
I assume that you have a hard drive connected to the AirPort Extreme that you want to access from a remote location, correct?
There are 3 basic methods to access the hard drive from a remote location. See this User Tip from forum expert Tesserax for more details:
AirPort Disk - Remote Access (3 Methods)

Similar Messages

How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
Thank you,

AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
It works with N version airports.
It will also show details of the AC model but cannot be used for the setup.. mostly.
I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
If you do not use ethernet then you are going to be forced to accept slow speed.
EOP (ethernet over power). Also called homeplug in the US.
http://en.wikipedia.org/wiki/HomePlug
Provides a method of networking over power cabling that already exists in your house.
So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
To spell this out.
A wireless link to an extended device will go very slowly.. if it is not direct.
So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
Ethernet by contrast does both at once. It is full duplex.
Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
When you put all this together.. there are a couple of rules for fast connection.
1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

How do I set up my Airport Extreme to best use multiplayer games locally

How do I set up my Airport Extreme to best use multiplayer games with my family. Everyone is located in the same house and uses the same router.
I have tried a few games but have not successfully connected 2 players

That is a weird question, as your GAMES could be interpreted a hundred different ways. Are we talking about third party devices here or what?

How do I make my new Airport Extreme a base station?

I have been using an Airport Extreme (5th generation) as my base station router for a few years. I set the main network for my and my wife's use and created a guest network for when my sons visited and needed to use the wi-fi connection. I used passwords for both networks. Today I purchased a new 802.11 ac Airport Extreme. I unplugged the 5h gen. Extreme and plugged in the new Extreme. After a short hunt, my new 27" (late 2013) iMac found the new Extreme and had me set up a name and a password for it using Airport Utility. I was expecting it to ask if I wanted to set up a guest network, but it did not. I was expecting it to ask since I believe that is what happened when I installed my 5th gen Extreme a few years ago. For the 5th gen Extreme, I had to enter a password to protect settings on the Extreme, a WPA2 password for my main network and another password for my guest network. It took about 10 minutes to set up. For this new Airport Extreme I entered just one password. It took about 2 to 3 minutes for the entire setup. When I checked the menu in the Airport Utility under "Base Station", all lines are grayed out. Under the File Menu in Airport Utility, "Configure Other" is available, but "Import Configuration file" and "Export Configuration file" are also grayed out. I checked Network Settings in System Preferences and I see my new network name in the Wi-Fi menu and under the "Advanced..." button, I see the old and new Networks listed in the "Preferred networks" box.
So, how do I get the new Airport Extreme to act as the Base station and be able to enter a guest network? Does it require me to delete the old Network name from the Advanced... button page in System Preferences > Network Settings? Will I just have to start all over with the new Extreme to make it a base station?

Hello Leo,
I'm not at home so can't confirm but I can only assume that maybe some of the "old" settings in airport utility have changed, and simplified. Hence why you probably only need one password.
When I bought the new "tower" like AirPort Extreme, I just plugged it into the Ethernet, powered it on with the previous generation Extreme in place and in Airport Utility it just asked me if I wanted to copy the settings to the newer device, which included a few "port forwarding" settings. All done in this sequence. I didn't have guest network set up but you can still set up guest network under wireless in Airport Utility, hope this helps!

How can I strenghten a weak Airport Extreme (2nd Generation) signal?

I have been having a weak WiFi signal in my Airport Extreme. Even when I am in a room that is less than 30 ft away.
Here are the details:
AirPort Extreme 802.11n (2nd generation)
     Version: 7.6.1
     Wireless Mode: Participate in a WDS network
     Wireless Security: WPA/WPA2 Personal
     Channel: 6
     Connect Using: Ethernet
My Airport Extreme is on the second floor of the house and is connected to a D-Link DIR 825 router that is on the first floor.
Sometimes when I am on the second floor, I get a better signal from the D-Link router than from the Airpot Extreme.
How can I strenghten the signal?
Thanks in advance

Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme
Information about the device will be displayed in the area to the right
The 3rd Generation product was the first Apple simultaneous dual band router, introduced in March 2009. Minor changes were made in the chipsets between the 3rd Generation and 4th Generation versions with some antenna improvements added in the 4th Generation versions as well. The 4th Generation version was introduced in October 2009.

How do I extend my existent airport extreme network by addition of a 2nd airport extreme?

How do I extend my existent Airport Extreme network by addition of a 2nd Airport Extreme?

Can you clarify which version of the AirPort Extreme that you have now along with the model that you plan to use as the second device?
The older "round" AirPort Exteme or the newer "square" version with rounded corners?
Are you planning to extend using wireless only.....or by connecting the AirPort Extremes using a wired Ethernet connection?

How can I set up the airport extreme base station with windows computer

how can I set up the airport extreme base station with windows computer

Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

HT4907 i am trying to set up an airdisk that is connected to my parents airport extreme, though next to my iCloud account details i get a yellow status light and can't get a hold on the airdisk being connected to an other internet connection..what should

i am trying to set up an airdisk that is connected to my parents airport extreme,
though next to my iCloud account details i get a yellow status light and can't get a hold on to the airdisk when i'm being connected to a different internet connection..what should i do?
sharing is enabled and i entered the right account details.
the disk shows up connected to my parents network, but i want to access it from my place as well

Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
    * A PowerPC G3, G4, or G5 processor
    * Built-in FireWire
    * At least 256 MB of RAM (I recommend 1GB minimum)
    * DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
    * At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/

How do i set up my airport extreme to access from my work windows based PC

How do I set up my airport extreme to access from my work windows based pc?

To mount the AirPort Disk in Windows 7 or Vista:
Open the Network browser by double-clicking Network on the Windows Desktop.
The AirPort Extreme base station name should appear in the browswer.
Double-click the name and you should get a login prompt.
Now depending on how you set up disk access:
In the Name field, either enter the user account name or for base station/disk access, leave this field blank.
In the Password field, enter the base station, disk, or user account password.
Select the volume(s) you want to mount, and then, click OK.

Can't connect wireless device to airport extreme

I bought airport extreme router second hand and am connecting it to HP desktop windows 8. All software is installed properly and router is connected. I have a solid green light, and internet access on desktop, but cannot connect wireless devices to network (kindle, cell phone, etc.) All wireless devices show excellent network signal strength, allow me to put the password in, but all show connected and have not internet access.

This appears to be a simple modem, so assuming that you reset the modem completely before you connected it to the AirPort Extreme, the next step would be to check to insure that the AirPort is in router mode and not bridge mode.
Open up AirPort Utility, click on the AirPort Extreme, and then click Manual Setup
Click the Internet icon at the top of the window
Click the Internet Connection tab just below that
Make sure that the setting for Connection Sharing is set to Share a public IP address
Click Update to save any changes, and give the AirPort a full minute to restart
Check the network again to see if devices can connect now.

How do i use a 2nd airport extreme both are newer models

how do i use a 2nd airport extreme both are newer models

I assume that you mean that you want to extend the range using wireless only.
This Apple Support Document will tell you exactly how to do that:
http://support.apple.com/kb/HT4259
The instructions assume that you have AirPort Utility 5.6 for Mac OS X Lion , so if you have not already done so, you will need to download and install this application to track the instructions in the support document.

Why does 2 Airport Expresses connects to one another instead of connecting to the primary Airport Extreme For internet Connectivity ?

I have Netgear DG834G router only for dsl connectivity wifi connectivity to that router is off. i have connected netgear that provides adsl connectivity to the (Shakeel's Airport Extreme) Airport Extreme dual band Wireless N 5th generation via cat 5 cable so airport extreme is the main wifi device through which i get wifi signals at my home. now our house is big and i have installed the adsl netgear modem and airport extreme router at the same place in my room in the upper story but the signals are weak even in the upper story at the other end of the house so i have installed the new airport express dual band wireless N in the upper story (Kafeel's airport express) and it is connected to the primary airport extreme (Shakeel's Airport Extreme) wireless router in range extention mode it repeats the same ssid. Our ground floor has another airport express dual band wireless N the new one ( Lounge's airport express) signal was weak there so i installed another airport express (Lounge's Airport Express) their and configured it to extend the range of primary router airport extreme (Shakeel's Airport Extreme) in the upperstory with the same ssid. Now the problem i am facing that sometimes lounge's airport express connects to kafeel's airport express instead of connecting to the airport extreme and the signals in lounge are weak because all the devices are connected to kafeels airport express and does not connect to lounge air port express. but when lounge airport express is connected to primary router airport extreme then everything works fine devices connect to lounge airport express and signals are full. i have took pictures of the problem i am facing you will understand better by having a look at it. In normal working setup both the airport expresses are connected to airport extreme which is shown in this picture
The second picture shows when lounge airport express is connected to kafeels airport express and not the airport extreme (Shakeel's Airport Extreme) this is the problem.
isnt there a way to correct this so that they dont connect with each other and connect to the airport extreme ?

Lounge's AirPort Express must be located signficantly closer to Shakeel's AirPort Extreme than it is to Kafeel's AirPort Express, and there must be fewer obstructions in the signal path than the other possible connection.
The reason is that if you want Lounge's AirPort Express to connect to Shakeel's AirPort Extreme, it must receive a significantly stronger wireless signal from Shakeel's AirPort Extreme than it does from Kafeel's AirPort Express.

Is it posable to connect 2 ISPs to Airport Extreme?

Is it posable to connect 2 ISPs to Airport Extreme for Redundancy and load balancing? If not with Airport Extreme woudl it be posable with 2 airport extremes or some other hardware. I know there are Cisco rauthers taht suport dual WAN but trying to stay with apple products for easier integrations as our office is primerely mac oriented.

You will need a dual WAN router to be able to do what you want. Cisco would be a good choice for this.
If you use 2 AirPort Extremes, you will have two completely separate connections....and no way to balance the load between them.

How can I access HDD on Airport Extreme with iPad

How can I access HDD on Airport Extreme with iPad

Without third-party software I don't think you can. An iPad has no user-accessible interface to a file system. Just what is it you're trying to do?

Unable to connect Brother printer to Airport Extreme using USB

Hi, I recently bought a Brother HL-2270DW printer, which has 802.11 b/g wireless capabilities. My airport extreme (2008 model) is set to 802.11 n (5 ghz), so I can't set-up the printer wirelessly to the airport extreme without changing to 802.11 b/g. Instead I'm fine hooking up the printer to the airport extreme using a USB. When I first turn on the printer, I can print from my Macbook, but after a few minutes, the printer goes offline and has to be turned off/on. When I try to Open Printer Utility, there is a connection error. I have the right driver installed, and I can print fine for a few minutes after turning on the printer, and all the time when the printer is connected to the Macbook directly using the USB. I would like to use the printer by connecting it to the airport extreme using the USB or Ethernet. Any help would be much appreciated, thanks,

Please explain exactly what you're experiencing that leads you to claim that.
The current firmware of the TiVo Premier is easily confused about whether it's connected to the Internet or not. In my experience, a TiVo unit will quickly regain its senses and decide that it really is connected.

How to connect on distance to airport extreme

Similar Messages

Maybe you are looking for