How to connect to an add-hoc
hi there, i am using an i-phone 4s which is connected to wifi throough a PC add hoc, it was working fine with the IOS 5.1.1 but after upgrading to IOS 6 i could no longer connect it any more, meanwhile it is working fine with my home wifi network and 3G . any ideas ???
To connect:
URL url = new URL("http://java.sun.com");
URLConnection conn = url.openConnection();To read content:
InputStream in = (InputStream) conn.getContent();
BufferedReader rd = new BufferedReader(new InputStreamReader(in));
String st = rd.readLine();
Similar Messages
-
How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
SigveHi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve -
How to connect my ipod touch using ad hoc that i created?
pls help me on this. theres a sign of wifi at the upper left of my ipod meaning i am connected to the ad hoc i have created in my laptop. but when i go to safari, itunes, facebook, email, it always appear that theres no internet connection. please help me on this.
Is the as hoc network assigning an IP address (using DHCP)? If not yo will have to go to Settings>wifi the connected network and enter the appropriate IP address and other things like DNS. What you enter depends upon how your network is setup. The instructions for setting it up should say how to configure it.
-
How do you install the "add-in" on adobe connect?
How do you install the "add-in" on adobe connect?
Either do so when prompted in the Meeting room if you join as a Presenter or Host, or when you attempt to share your screen, or from the test your computer page for Connect, or by downloading an running the executable file.
-
How to connect, add delete and modify sqllite data base.
dear friends,
i am developing a stand alone project, in that i want to
store the datas in the local machine using sql lite. Iam new to
Flex. i know air and flash very well.. any body can help me, how to
connect, add, delete and modify the data in sql lite. i want to
store users option in local machine.. i got struct up. i have to
finish my project...pls..
thanks and Regards,
Syed Abdul RahimHi,
Please find details on how to access SQL Lite database from
AIR applications at the URL below.
http://livedocs.adobe.com/flex/3/html/SQL_01.html
Hope this helps. -
How to connect my ipad to an ad-hoc network and access internet?
Tried many times.. Except the ipad all other devices could access the internet through ad-hoc network
Not sure if you fixed the issue. But by selecting No Authentication when you create an Ad Hoc connection, iDevices connect to the ad hoc. I use it all the time at office to browse internet where my 3G signals are weak.
-
How to connect my friends apple notebook through video call
HOW TO CONNECT TO A FRIEND WHO IS USING APPLE NOTEBOOK FROM MY IMAC SUGGEST ME WAITING FOR A SOLUTION FROM APPLE TEAM SUPPORT
Hi,
Typing in all upper case is regarded and shouting here.
Presumably as you have posted in the OS X 10.7.x (Lion) area you are running this version of the OS on your iMac.
This will have iChat 6 on it.
This can use AIM, Jabber and Yahoo IDs within the app.
Apple IDS ending in @mac.com and iCloud issued @me.com and @icloud.com are also Valid AIM Screen Names.
If you use Googlemail and Enable "talk" in the products there you can then use your Google Mail ID as a Jabber ID (although it has it's own Add Account option in iChat)
Facebook has an option to Enable "Chat" which will give you a Chat ID variant on your name there and this can be used in iChat (or Messages) as a Jabber ID.
The Yahoo Account will only do Text chats.
It also has to be an actual ID registered at Yahoo.
Chats are then AIM to AIM or Jabber to Jabber or Yahoo to Yahoo.
So your Buddy will also need a suitable ID or Screen Name for the relevant service.
8:16 pm Sunday; January 19, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
How to connect my iPhone to my iMac trough bluetooth?
How to connect my iPhone to my iMac trough bluetooth?
If you have a wifi router you can set up/turn on the wifi... set the user name and password wifi in your router... open wifi in general settings on the iPhone... log into your router, user name and password. (If your don't know how to turn on the router wifi. Google the router make and model and you will find instructions on how to do this.)
If you don't have a wifi router and your Mac has wifi capabilities you can hookup to the internet over wifi from your Mac to your iPhone.
System Preferences on the Mac... Network... Wifi... Advanced tab... Hit the '+' to add a user name and password...
Make sure you use WPA2 Personal for Security... Hit ok... Turn on the wifi... Same as above with the iPhone, log into your wifi settings on the iPhone.
*Important point... Use WPA2 for the encryption/Security setting. If you use anything else for this setting, your wifi can be hacked. -
How to connect my mac book pro to network printer Canon IR 2010f?
I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.
The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality. -
How to connect an non-hana-ewm with an Hana-ECC and vice versa
Hello,
for our migration project planning I am wondering how to connect EWM on SAP with ECC on Hana and vice versa.
As it is, both systems are (productive) on non - hana with actual SAP-Release and have to be migrated.
The background of my question: we may be not able do the "big bang" thing to migrate ERP ECC607 and EWM (with special Add-Ons) at one point to Hana (DMO) and therefore may need an interim solution. I checked ETL and LTS as "connectors" but they - from my point of view - are one-way solutions from EWM to ECC/Hana -not bidirectional.I Found some questions concerning the same theme in the net but no solution at all till now..
How about BODS ? (Didnt work with it yet)
Best regards,
RonaldGreat. So I have to either install OS X, or buy a new mcahine. Can OS X run on a G3 without grinding to a halt?
By the way, I cannot get the iPod to even mount when connected via firewire. The USB/firewire PCMCIA card does not have drivers for OS 9. I thought that this support was built into OS 9. The USB port works (although the iPod will not mount when connected via USB either). Any ideas?
Thanks -
How to connect sql server using oracle Client
Hi,
I am working in oracle9i and windows os 32 bit.
I need to connect SQL server 2000 from my oracle client..
I heard about heterogeneous connectivity ...
Please expalin me the steps what to add and how to connect the sql server...
Regs....Are you trying to connect to SQL Server from your Oracle database (i.e. create a database link in Oracle to SQL Server)? Or are you trying to connect to SQL Server using your Oracle client software (i.e. SQL*Plus)?
The former just requires Heterogeneous Services with Generic Connectivity. The latter is functionality that has been depricated and probably no longer works in your environment.
Justin -
How to connect sql server 2008 r2 sp2 with vs2013 ultimate?
how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?
Hi Shahzad,
>>how to connect sql server 2008 r2 sp2 with visual studio 2013 ultimate?
Based on your issue, if you wan to connect the sql server 2008 r2 sp2 from VS2013 IDE. I suggest you can try the Ammar and darnold924's suggestion to check your issue.
In addition, I suggest you can also refer the following steps to connect the sql server 2008 r2 sp2 with visual studio 2013 ultimate.
Step1: I suggest you can go to VIEW->SQL Server Object Explorer->Right click SQL Server->Add SQL Server.
Step2: After you connect the SQL Server 2008 r2 sp2 fine, I suggest you can go to VIEW->Server Explorer-> right click the Data Connection->Add Connection.
And then you can create the connect string in the Add Connection dialog box.
Hope it help you!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to connect one database in two threads?
Dear All,
If anyone can tell me how to connect one database concurrently?
I tried the following idea:
1.create a Hashtable to keep database objects(those databases have been opened)
2.Before openning(connecting) a database:first step is to check the hashtable.
If the the database object is in the hashtable, this object will be returned.
If the datatbase object is not in the hastable, open the database and store this opened database object into the hashtable.
I failed the test of this implementation. My test is:Create two threads (extend java Thread class).In each of these two threads, try to open the same database.Just like the following:
MyThread thread1 = new MyThread();
MyThread thread2 = new MyThread();
thread1.start();
thread2.start();
I guessed the database object in the hashtable would be returned in the second thread.Unfortunatly, I only got an exception which meant the database couldn't be opened twice.It looks like the second thread happened before the opened database object stored into the hashtable.
I cannot figure out if my design is wrong or my test application is wrong.
I really appriatiate your attentions!!!
Luum not sure i follow exactly but in your code add the word synchronise to it and this means only 1 tread can access it at any 1 time.
So your could have a class which is a singleton so it only opens the dbase once and then all other access share your connection.
so
public class foo{
foo INSTANCE = new foo();
private foo(){} //private constructor
then all your methods use foo's internal dbase connection. Am i making sense -
How to connect sybase database in JDeveloper 11g using JConnect
Hi
How to connect sybase database in JDeveloper 11g using JConnect? Please help.User,
It would help if you explained Sybase Jconnect instead of leaving us to google.
At any rate, it appears you need to create a library definition in JDeveloper, add the appropriate JConnect JAR files to the library's classpath, and then add the library to your project.
John -
How to connect Oracle database in VC++.06
How to connect Oracle database in VC++.06 please give me details
on the Insert command button and add the following code to the button click event:
try
string results = "";
OracleConnection con = new OracleConnection("DSN=Employee;uid=system;pwd=test");
con.Open();
.....................................................................
Maybe you are looking for
-
How to Load table from client file in C?
Hi all, I'm trying to determine how to write a C program to load a client file with the "load table ... using client file..." syntax without calling out to the dbisql program to load the table. I'm probably not seeing the forest for the trees here.
-
Hi gurus, I have a little problem from a client. For example : i have 3 items item A gross weight 2kgrs item B gross weight 1,5kgrs item C gross weight 3kgrs there is SD order with above items as follows: item A 2 pcs (gross wei
-
I have created web banners in after effects, exported the swf file and placed them in a Muse site I am building. When I try to upload to my ftp it will not load. I am thinking that my banners are just too large of files. What should I do? I don't kno
-
what do i do, i have my ps3 connected to my router via wireless and i lag extremely bad when i play online. the signal strength is 50%. how do i get rid of the lag?
-
I have a simple home G5 setup -- Road Runner cable access going through simple router. Seems that after the last OSX update my web access began deteriorating. Time Warner replaced the cable modem but it hasn't helped. Today it takes several minutes t