How to connect to internet in solaris 11

Hi All,
I am a oracle DBA, not much knowledge of solaris.
To install missing packages I need to connect my Solaris 11 box to internet.
Data centre guys have provided me 1 proxy server IP address for LAN and a Port number.
But i am not sure where to update these IP address and port no. to access the internet.
Need your kind help for this.
Thanks.

i hope ur downloading from shell
then use this
export http_proxy=http://proxyusername:'password'@test.com:portnumber
ex::
from bash/ksh shell i used to tun this when i need to run any wget or curl from solaris machine
export http_proxy=http://muvvas :'abc&@xyz'@test.com:8080
export https_proxy=http://muvvas :'abc&@xyz'@test.com:8080
export ftp_proxy=http://muvvas :'abc&@xyz'@test.com:8080
if you are not using any username and password simly use
export http_proxy=http://test.com:8080
export http_proxy=http://10.x.x.x:8080
test with wget
wget google.com
and please provide the wget o/p if any errors occured.

Similar Messages

  • How to connect to Internet through a LAN

    Hi everybody !!!
    Please show me how to connect to Internet through a LAN (through another computer).
    On Windows XP system, i use the following informations to do that:
    + My IP: 192.168 .1.45
    +subnet mask: 255.255.255.0
    +default getway: 192.168.1.12 (IP of another machine)
    +Preferred DNS server: 85.255.192.2
    +Alternate DNS server: 195.131.52.130
    and in IE i use the proxy server: 192.168.1.12:8080
    Thanks alot !!!

    Just how is the one computer connecting to the internet? What type of connection does the office have, DSL, Cable or is it a Data connection through a Cell phone provider.
    I doubt all other computer are doing Ad-Hoc but are probably Sharing the Internet connection with Internet Connection Sharing from that one Windows base PC.
    All you khave to do is Connect to that same WiFi SSID name and have the correct password for it.

  • HT1529 how to connect to internet by using Ethernet Cable

    how to connect to internet by using Ethernet Cable
    I have apple mac book pro with retina display.plz send me the setting thank u

    There's no setting. Plug in the cable to the adapter for either USB or Thunderbolt and plug the other end into your router. You can turn off wireless at that point.

  • Cannot connect to internet in Solaris 10 OS.

    I setup X4500 running solaris 10 OS. But, I cannot connect to internet. I do not understand whats wrong with that. When I ping google or any other site from X4500 its not transferring any packets. I can ssh it from a remote computer. So, running fine on the network. I have a static IP for that. Could someone please help me with this.
    Thank you

    Can you ping your own default gateway's IP address?
    Can you traceroute to a public IP address like forums.sun.com (72.5.124.102)?
    Can you use nslookup to resolve hostnames to IP addresses?
    Does your /etc/resolv.conf have lines like:
    nameserver 192.168.0.10
    Where 192.168.0.10 is the IP address of your local DNS server(s)?
    Did you copy /etc/nsswitch.dns over /etc/nsswitch.conf before trying to reach websites?
    I hope investigating these questions help.
    regards,
    ~ Dairenn

  • TS1368 how to connect to internet on iphone4

    Having trouble connecting to internet.  I get on internet all time but it's not connecting ft

    Hi samanthahulen,
    If you are having issues connecting to the internet from your iPhone 4S, you may find the following article helpful:
    iOS: Connecting to the Internet
    http://support.apple.com/kb/ht1695
    Cheers,
    - Brenden

  • How to connect over internet to time capsule from iphone?

    I want to connect to my time capsule 2013 over the internet with an iphone 5, my time capsule is now set in bridge mode and main router is an airport express. How to set to connect in this case and what is a global hostname? In the past i have time capsule as primary router and it was ok to access with file browser, but now i can't connect only in the local wi-fi. Sorry about bad english.

    You will have multiple issues here.
    It would be much better for the TC to be the main router. Do you have to use express as the main router?? It is underpowered and does not even have disk access.
    Remote access is also super difficult from an iphone.. it is not a Mac.. apple designed remote access for Macs.
    https://discussions.apple.com/docs/DOC-3413
    You can use filebrowser method.
    http://www.stratospherix.com/support/gsw_timecapsule.php?page=6remote
    Only you need to use the LAN IP of the TC instead of the LAN IP of the express.
    Global domain name.. might still work or might not.. apple is working hard to avoid it..
    The best option is to buy a static IP from your ISP. That simplifies this whole setup.
    Another option not listed is to replace the Express with a proper vpn router. iphone has vpn client built in.. but apple did not include a vpn in their routers. VPN is a lot safer and standard routers use standard dyndns.

  • E72 keeps asking how to connect to internet

    Hi there,
    Each half an hour (or something like that) I get some message on my cellphone in which I need to select which connection I would like to use to go on the internet. This message is starting to get really ennoying, so I was hoping someone knows how I can turn it off?
    Personally, I think it is some program like the email, that is trying to check for emails each half an hour by using internet. Although I haven't set up any emailaccount on my phone. 
    I also only go online using wifi. 
    Anyone have idea where I can turn off this message appearing on my phone?
    thanks already!
    Solved!
    Go to Solution.

    hallo jerhay,
    is there any application that you have installed uses internet access point on regular intervals?
    also as mentioned already in this thread, it might be even World Traveler.
    also cross check for any mail boxes
    If this post helped... Add some kudos!!

  • HOW TO CONNECT TO INTERNET

    I have an ipod touch and it has no problem connecting to the internet on other networks except for the one i have at my house. I want to know how I can connect my ipod to the internet at my house and I have no idea how. I know the password so when i try to connect wirelessly it should work but it wont let me. I am very confused please help.

    What error message do you get?
    Try:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset Network Settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points

  • How to connect W2k Desktop to Solaris(intel) Server

    Hi there, I am new to Solaris, I have successfully installed Solaris 8 (intel). I also configured my NIC. What are procedures or H/W requirement to connect to this Solaris Sever from other machine running W2K thru telnet/ftp

    Thnx for the responding Lee,
    Here is how I try to connect Solaris(intel) to W2k machine.
    On Solaris machine
    1. I installed network driver from Realtek (as my network card is generic Realtek card)
    2. Ran "sys-unconfig"
    3. Attach the network adapter card to the system
    4. At the OK prompt, type boot -r
    5. Provided required information as prompted.
    Here what happed if I connect Solaris machine to my DSL modem with network cable every thing goes fine.
    But as soon as I connect Solaris machine and w2k machine and boot Solaris I get the following message
    -Notice: RTLS start_board --Cable Connect Failed !!
    I get this message even if I try above mentioned step once again while having my w2k and solaris machines connect to each other via network cable.
    Could you figure out what could be the problem or What am I doing wrong
    do I need to something on my w2k machine before I try to configure my NIC on my solaris maching
    thnx
    -kb

  • How to connect to internet with sim 2 in XL

    XL doesn't give option to connect internet with sim 2. When I turn on mobile data it always connect with sim 1. All time I have to go to settings to connect with sim 2 after connected with sim 1. Is there any way to choose sim when I'm turning on mobile data?

    The user guide gives you this..
    By default, your phone asks you which SIM to use for the connection. You can also set the default SIM for calls, messaging, and mobile data connections.
    Select which SIM to use for calls and messaging
    Tap Settings icon > Dual SIM.
    Switch Always ask to OFF.
    Select which SIM to use for calls and messaging.
    Select which SIM to use for mobile data connections
    Tap Settings icon > Mobile data and networks, and select which SIM to use for mobile data connections.
    Availability of SIMs
    You can use 2G or 3G SIMs in both SIM1 and SIM2 slots, but the SIM2 slot supports 2G network only.
    When you set one SIM to be used for outgoing calls or messages, or for data connections, the other SIM can still receive calls or messages.
    When one SIM is having an active connection, the other SIM is not available.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How to connect oracle database from solaris platform

    I have installed oracle9i client on solaris8, how can I configure to connect other oracle database?
    thanks for your assistance!!

    If the database is remote you would need to setup a sqlnet.ora and a tnsnames.ora file. Their locations are platform dependent. On AIX the files are in /etc while on some platforms you find the files in /var/opt/oracle and on others $ORACLE_HOME/network/admin. We have a Sun Sparc running SunOS 5.6 that has them in /var/opt/oracle.
    Configuation can be done through the installer as part of the install process, probably using a gui tool, or manually. We vote for manually.
    See your install README files and the ORANET manuals for details. Or once you know where the files belong copy them from a platform that can access the db you want to reach and just remove unnecessary lines for other databases.
    HTH -- Mark D Powell --

  • I need to know how to connect to internet using the netgear n150 wireless router

    I recently signed up with comcast internet.  They supplied a NETGEAR N150 wireless router.  After following instructions that came with router, I still cannot use the router to connect to the internet.  The computer has to be connected directly to the modem for internet access.  HELP!!!!

    Here are some of the recommended setting from Apple.  Maybe that will help.
    http://support.apple.com/kb/HT4199
    Regards,
    Captfred

  • How to connect to internet in single user mode

    I've got some startup problem and would like to connect to the internet in single user more for downloading patch. Can anyone help me? Thanks.

    To start up in single user mode press command-s during start up.

  • How to connect to internet while in europe

    I will be going to europe on saturday and plan on bringing my laptop with me to check my emails. I just got my macbook and am fairly new at all this and dont understand all the network terminology so please bear with me. What are the different ways I could connect to the internet in Europe? Keep in mind i will be going to Bosnia, where starbucks doesnt exist and I have no idea if the cafes offer something similar like starbucks. There are internet cafes but its kind of far from where i will be staying in the suburbs. Would a dial up connection be best then? what do I need to do? can i bring the router and cable modem over there or is that just not possible? As you can see I am a total newbie at this and need a lot of help. thanks in advance.

    I would personally go with a Bluetooth enabled phone which you can also use as a modem via either GPRS or 3G. You mobile service provider should actually be able to assist you with that.
    Whiile it can get a little expensive if you do more than just send an receive e-mail although I do find it extremely handy to be able to connect when and where you like and only being limited to mobile coverage.

  • How to connect to internet with out cable or telephone service

    I presently have internet connection through AT&T, which requires a land line phone.
    I would like to have internet connection and cell phone usage without cable or phone service.
    Is there a device; and or a hook-up that will allow wireless internet connection??

    The way I understand it is you can have a "dry" line to the internet where you can have DSL through AT & T without having phone service using the same line. I have had that in the past. I also have had cable internet service provided without having any cable TV service. It would be that or you would probably have to sign up for a mobile broadband card through one of the cell phone companies. Those you would pay somewhere between 50-75 bucks per month and would most likely get a device that plugs into a USB port. Unless you really like portability I would probably look for the dry DSL line or just get internet and no TV through the cable company.......

Maybe you are looking for

  • Generation of reimport includes is taking long time in SOLMAN

    Hi In order to set EWA I hava activated SDCCN and tried to generate inludes under IMG setup. but its taking a long time compiling. Is there anything wrong. How can i fix it. Please suggest

  • Serial number in inventory management

    Dear experts , I have  assigned serial number profile in material master . While doing a GR i ticked the create serial number automatically & the system assigned a serial number to the material . I want to know , where do u define & assign the number

  • Two databases in the same host.

    Hi Group, I have a doupt, It's possible that two databases with the same name, live in the same host, if they have different OracleHomes, and the SO users who were installed with are different? eg. SO user: oraqas OracleHome1 : /qas/u01/app/oracle/pr

  • Service Registry roles

    Hello all ! What are the roles necessary to access the "Services registry" in PI 7.1 system? Also, please provide me with the URL for the same. Thanks, Shahid Ahmed.

  • Blackberry Protect - Delete data command executed on new Z10 and not lost Z10

    My BB Z10 was stolen and somebody took the battery off immediately. I executed command to display message and delete data using blackberry protect. Command will be executed whenever the thief turns phone on. Afterwards, I restored data from blackberr