How to continue Online-Update?

One year ago I oderdered SJDS, installed it and was able to do an online update with the serial-number of my media-kit. Now I 'm never allowed to do an update. I get the message "invalid serialnumber". Of course I need a continuation of my licence, And I did it and payed for I it and got a nice paper "PROOF OF LICENSE". But the serial-number is still invalid!
What to do? How can I get new updates?

Hi Winfried,
You can generate a new serialnumber here (register now)
http://www.sun.com/software/javadesktopsystem/service/index. jsp
Cheers,
Fabian

Similar Messages

  • How to install this update and solve USB and touchpad issues?

    I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
    Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
    The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
    The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
    This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
    Driver revision history:
    Twinhan VP704A Driver Release note
    Note:
    1.In case the system crashes while running with VP704A, Please install ULI
    USB 2.0 host driver in \ULiUSB20Driver
    2. For XP/SP1, please update with the patch in
    <http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
    3.In XP/SP1, updating driver will crash the system, while new install is ok.
    The trick to update driver in XP/SP1 is shown in the following steps,
    a. Uninstall the driver
    b. Unplug and plug the USB device
    c. Install the driver
    4. To support remote controller, please launch Agent.exe in \Agent.
    Further details can be found in \Agent\Readme.txt
    Known issues:
    1. Multi-instance is not supported
    2. Remote wakeup is not supported
    3. High CPU usage in Analog audio/video capture
    4. Bad VBI Signal using YUY2 color format
    5. AV out of sync if audio captured from wrong filter.
    (Fix:using the filter "USB Audio Device" in WDM stream capture device)
    6. Noise with analog-TV and FM Radio
    (Fix:using the filter "USB Audio Device" in WDM stream capture device)
    Driver revision history:
    2005/10/24, Version: 1.0.2.8
    Bugs fixed and new features:
    1.Crossbar not properly set.
    2005/10/21, Version: 1.0.2.7
    Bugs fixed and new features:
    1.Firmware version read from FLASH OK!
    2005/10/14, Version: 1.0.2.6
    Bugs fixed and new features:
    1.Mutil-Access driver blank part below part screen when VBI!
    2.Mutil-Access driver HCT driver verify crash fix!
    2005/10/07, Version: 1.0.2.5
    Bugs fixed and new features:
    1.Tuner Power off when S-Video,Composite.
    2005/09/30, Version: 1.0.2.4
    Bugs fixed and new features:
    1.Agent.exe updated for repeat bug!
    2.TI5150 Register for Video Format fix!
    2005/09/29, Version: 1.0.2.3
    Bugs fixed and new features:
    1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
    Note: "USB Audio device" filter provided by system does not support mutil-Access.
    2.Reset TI5150 when a new frequency is set
    2005/09/27, Version: 1.0.2.2
    Bugs fixed and new features:
    1.Fix I2C unstable access on some devices.
    2005/09/23, Version: 1.0.2.1
    Bugs fixed and new features:
    1.Analog TV becomes darker sometimes.
    2005/09/15, Version: 1.0.2.0
    Bugs fixed and new features:
    1.Fix INF for Windows 2000 installation.
    2.FM radio scan policy changed!
    2005/09/13, Version: 1.0.1.9
    Bugs fixed and new features:
    1.USB serial number string not visible with USBView, firmware update required.
    2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
    2005/09/13, Version: 1.0.1.8
    Bugs fixed and new features:
    1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
    2005/09/12, Version: 1.0.1.7
    Bugs fixed and new features:
    1.Improve channel lock status check performance
    2.Pinnacle INF Fix.
    2005/09/09, Version: 1.0.1.6
    Bugs fixed and new features:
    1.Add some audio initialization function.
    2005/08/31, Version: 1.0.1.5
    Bugs fixed and new features:
    1.NTSC & PAL mode resolution separation.
    2005/08/30, Version: 1.0.1.4
    Bugs fixed and new features:
    1.AvgTimePerFrame.
    2.Frame Drop.
    3.Pinnacle inf file HCT chkinf fail.
    2005/08/22, Version: 1.0.1.3
    Bugs fixed and new features:
    1.Add Remote controller interface in digital source filter.
    2.A new Remote controller test tool with source code in \Test_RC.
    2005/08/16, Version: 1.0.1.2
    Bugs fixed and new features:
    1.Reorg Pinnacel & Twinhan's driver & folder.
    2.VP704A_BDA_Test tool, add system code test.
    3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
    4.Firmware update
    2005/08/15, Version: 1.0.1.1
    Bugs fixed and new features:
    1.Serial number function is lost while adjusting TV audio volume
    2.RC6A CIR support
    (This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
    The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
    EEPROM should be flashed with \Firmware\M9207.bin )
    3.Serieal number, MAC address and OEM device name supported.
    Please refer to further details in \Firmware\readme.txt.
    4.Ioclt sample source code included.
    2005/08/08, Version: 1.0.0.10
    Bugs fixed and new features:
    1.Analog TV audio volume increase.
    2005/08/04, Version: 1.0.0.9
    Bugs fixed and new features:
    1.Analog TV Video mode set failure.
    2005/08/03, Version: 1.0.0.8
    Bugs fixed and new features:
    1.Off-centerf requency scan +/- 125Khz
    2.Fix duplicated program scanned in MCE.
    2005/08/02, Version: 1.0.0.7
    Bugs fixed and new features:
    1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
    2005/07/28, Version: 1.0.0.6
    Bugs fixed and new features:
    1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
    2.Improve I2C communication stability.
    3.Unify Signal strength & quality indication as THBda ioctl interface.
    4.Capture filter Lock status check.
    2005/07/28, Version: 1.0.0.5
    Bugs fixed and new features:
    1. The same signal strength & quality indications as VP7046.
    2. Debug build driver
    2005/07/21, Version: 1.0.0.4
    Bugs fixed and new features:
    1.Update INF.
    2005/07/20, Version: 1.0.0.3
    Bugs fixed and new features:
    1.Improve performance in PCM4
    2.Switching from Analog TV Mode to FM Mode failure
    2005/07/04, Version: 1.0.0.2
    Bugs fixed and new features:
    1.Production Tool FM test OK!
    And here is the readme from the other file within the update ?
    ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
    INTRODUCTION
    This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
    and Windows XP.
    CONTENTS OF THIS DOCUMENT
    1. Installation Instructions
    2. Uninstallation Instructions
    1. Installation Instructions
    (Windows 98 SE & Windows ME)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system,then restart your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    (Windows 2000)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will install and load the driver and you don't have to reboot the
    computer.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off
    your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller" and install the driver.
    (Windows XP)
    A.When ULi USB 2.0 Controller has attached on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - Click "NEXT"
    - This program will install and load the driver and you don't have to reboot the
    computer.
    - After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
    Hub". Please select "install the software automatically (Recommended)" and then
    click "Next" button to continue install.
    - This program will install and load the driver and you don't have to reboot the
    computer.
    B.If no ULi USB 2.0 Controller on system
    1. Install ULi USB2.0 Driver
    - Run the setup program.
    - This program will copy driver files into your Windows system, then turn off
    your computer.
    - Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
    2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
    Host Controller", continue to install.
    - After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
    Hub". Please select "install the software automatically (Recommended)" and then
    click "Next" button to continue install.
    Notice:
    If you can't setup driver successfully. Please reboot your system and then follow
    above steps to install driver again.
    2. Uninstallation Instructions
    1. Open "Control Panel" folder.
    2. Invoke "Add\Remove Programs" icon.
    3. Choose "ULi USB2.0 Driver" item.
    4. Click on "Add/Remove" button to remove drivers.
    Change List:
    1.74
    1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
    2.support all USB2.0 Host Controller.
    1.73
    1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
    2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
    3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
    4.fix issue that wirless lan will disconect when plug-in usb device.
    1.72
    1.Fix issue that system will crash when USB HD copy large file.
    1.71
    1.improve Power management function in Win98/ME.
    1.70
    1.Improve the function of devcie detection.
    1.62
    1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
    1.61
    1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
    1.60
    1.To support power management functions when a HUB with USB device plug into
    a root HUB.
    1.57
    1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
    2.Fix issue that audio can't display smooth when USB device attach to system.
    3.Fix system can't detect USB dvice when USB device attach to system in
    suspend mode.
    4.Fix issue that when USB root HUB have full loading, USB HD sometimes
    transaction fail.
    1.56
    1. Fix issue that DVD decoder device can't display properly.
    1.55
    1. Fix OTI USB 2.0 hand drive can't be detect issue.
    2. Fix USB mouse can't use after resume from suspend.
    1.54
    1.Improve driver security.
    1.53
    1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
    2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
    1.52
    1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
    automatically fix file system errors
    2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
    v.1.51
    1. Improve USB 2.0 cardreader compatibility.
    2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
    v1.50
    1. Improve bulk transfer
    v1.48
    1. Fix USB 2.0 LAN driver installation hanging up
    2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
    3. Fix some laptops Win98SE booting hanging up
    v1.47
    1. Improve bulk transfer performance.
    2. Fix USB 2.0 bulk webcam preview failure.
    v1.46
    1. Support USB 2.0 and 1.1 Isochronous devices
    2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
    3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
    4. Improve device detection capability in Win9X/ME
    v1.45
    1. Fix system hanging up when resuming from ACPI sleep mode.
    2. Fix mouse sometimes doesn't disappear when it's unplugged.
    3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
    v1.44
    1. Support composite device
    2. Improve device detection
    v1.43
    1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
    2. Fix high-speed device detected as full-speed device
    3. Fix some USB mouses detection failure problem
    4. Fix some USB 2.0 hubs detection failure problem
    5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
    v1.42
    1. Fix PC Card ejection hanging up in Win98/ME
    2. Fix suspend/resume hanging up in Win98
    3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
    4. Fix some PC Card USB 1.1 device detection failure
    v1.41
    1. Add new feature that system can install driver before device is plugged.
    2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
    v1.40
    1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
    2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
    v1.32
    1. Fix issue that driver can't detect Microsoft driver in Windows XP
    if OS path is not c:\windows.
    2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
    v1.31
    1. Fix issue that driver can't install on Windows 2000.
    v1.30
    1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
    2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
    3. Fix issue that sometimes when you click "Scan for hardware changes".
    to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
    file can't be found.
    4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
    verison of ULi EHCI controller devices are plugged and unplugged.
    5. Support installing driver for more than one ULi EHCI controller devices existing on
    system at the same time.
    6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
    v1.20
    1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
    ULi Coporation. (ULi) web sites:
    http://www.uli.com.tw/ (Taiwan)
    CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
    i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .

    It says above 2 relevant and 1 correct answere available .............
    I'm new here so could anyone direct me to these answeres?

  • What has caused an app I purchased (Family Tree Maker for Mac) and currently have installed, to disappear from the Mac Store. Does this mean it is no longer sold?  If so, how will I get update notices or re-download if needed?

    I purchased and installed Family Tree Maker for Mac from the App Store about 6 months ago.  I heard that possibly a new version was coming, though I had not received any update notice.  I went to the App Store and it no longer shows the app, either as available for purchase or as an app I have previously purchased.  So I can't get any information on the app, support, etc..  How can an app I have purchased disappear from the purchased list???  How can I get update information or support links? (contacted FTM website and phone support and they said if I bought my program from App store, I have to get update information there).....the Update Info button in my program is actually greyed out!!  So the program I bought doesn't even have the normal update link!!  I thought one of the advantages of App Store purchase was being able to redownload the program in the unlikely event it was lost....ie: no need to worry about having the install CD.  So now I only have my installed, operating copy and no way to reinstall if it crashes due to corrupt data, etc.!!  Not a happy result from an App Store purchase!  And I must say the circular references in the support link are frustarting...apparently there is NO live support for the App Store itself!

    Thanks for THAT tip: iTunes acct. history DOES show my (few) Mac app purchases, buried in with my MANY iPhone and iPad apps!  So I CAN prove I bought it (7 months ago, not 6), but you wouldn't know it from the App Store app on my Mac!  But that does leave a few other ?'s hanging: like how could I download it again, or check for updates (as I said, the version installed has the "update" button greyed out!  Ancestry.com (who sells it online and support it for other buyers said update info for App Store purchasers comes through the App Store. 
    I may just be out of luck with this because after 7 months of ownership, they (Ancestry) just replaced FTM with a new version (Family Tree Maker for Mac2) that is NOT an upgrade (though prior owners get $4.00 off on a $52.00 purchase!!).  I'll probably just plump for that....direct from Ancestry.com...and give up on the Mac App Store, because the new version reportedly has major enhancements in sync-ing your family history record between your computer and the cloud program available online.  Genealogy software, like everything else is migrating to the cloud, but one really does need a resident program on their device because you're often collecting data "in the field" in libraries, historical archives, cemeteries, etc. where you really can't get online in many cases.  Fortunately, more and more of the source data is coming online, so more and more can be done from home!

  • I have an update required for Evernote in my Imac app store, but cannot find how to get this update. It says to sign in with my emailm address, but I cannot find a way to do this.  Please help!!

    I recently downloaded Mlountain Lion on my Imac. It shows that I have an update for Evernote that should be downloaded, but I cannot find out how to complete this update. It asks for me to sign in with my email address, but does not show how to do this.  Please help!

    I have done exactly what you said. When I check "update", a screen  drops down that asks that I enter my email address to continue........but i cannot find any way to do this.
    In the past, all I would do is check "update", and the update would take place. Since I upgraded to Mountain Lion, this has changed, and i do not know how to do this simple thing.......the app store shows an update is due to be updated, but i cannot find out how to do it.

  • Online update in FM, SAP 6.0

    Hi people,
    We are using online update of payment in SAP 6.0 as default for new customers. However i can't find the right combination of commitment item to address the following business process.
    I need to post travel expenses and travel advances that are payed through FI. These document are actually invoices with employee acting as a vendor.
    travel advance looks like
    31 vendor (CI 60)
    40 advance
    travel expense looks like
    31 vendor (CI 60)
    40 expenses (CI 30)
    50 clearing of advance previously posted.
    CI - commitment item type
    Problem occurs when we try to clear amounts on advance account and we produce exchange differences. System produces following posting
    40/50 advance
    50/40 exchange differences (CI 30)
    and doesn't allow the posting with the errors FI057  -  no invoice key or no VOBELNR.
    I tried to put on advance account commitment item of all types (60, 90, 50) and none of them works.
    The general question would be then how to handle business processes that include any kind of interim clearing when posting vendor and customer invoices.

    Dear Tomislav
    Please check whether this note is implemented in your system:
    1012189 FMPU_R: Error message FI 057 for exchange rate differences
    Should this is ok, then you should check whether your G/L account for  exchange rate diffs is correctly classified for document splitting, and your splitting method must be correctly linked to the transactions and item categories you are using (clearing operations, exchange rate differences...)
    I hope this will be of help
    Kind regards,
    Mar

  • Did anyone have an answer to how to cancel online ...

     how to cancel online phone number??  i'm wasting alot of time on this?  they make it easy to get the number , but give no info how to cancel? help?

    Hi, and welcome to the Community,
    If you can not cancel the subscription from your account (where subscriptions and credit are managed), please contact Skype Customer Service.  Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    As you know you wish to contact Customer Service, skip past Step 2 of the instruction and proceed to Step 3, Continue Support Request.
    Go to the Support request page.
    Select the topic you need help with and the problem you’re experiencing. Some information that might help with your problem is displayed.
    If you still feel that the information doesn’t help, click the Continue support request button at the bottom of the screen.
    Select your contact method. We recommend that you check our Support Network first.
    If you chose email, enter your details, describe your problem, and then click Send support request. We'll get back to you as soon as we can.
    We don’t currently provide telephone support.
    Hope this helps.
    Best regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • When updatig my ipod to iOS 5 I get a message that says "An error while bscking up this ipod - (500) would uou like to continue to update this ipod? Continuing will lose everything on this ipod)?

    I am trying to update my ipod touch 4 and I am getting a message that says "An error occurred while backing up this ipod - (5000) would you like to continue to update this ipod? Continuing to update will lose everything on this ipod."  How can I fix?

    It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
    from: http://support.apple.com/kb/HT4946
    The folder where your backup data are stored varies depending on the computer's operating system.   Make sure the backup folder is included in your periodic data-backup routine.
    iTunes places the backup files in the following places:
    Mac:  ~/Library/Application Support/MobileSync/Backup/
    Windows XP:  \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
    Windows Vista and Windows 7:  \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

  • How to cancel the update of iOS 7.2 in iPad 2

    Product name: iPad 2 , 32 GB
    Version: iOS 7.1
    Problem:My iPad update in iOS 7.2 but it said I shall RESTORE my iPad to continue my update.But I don't want to update it. I cancel it and open my iPad but their is in the screen shows the icon app of "iTunes" and the chord. How can I back it to the original?
    Troubleshooting Steps: I've tried to click the Home Button to unlock it but the screen still showing the icon app of "iTunes" and the chord.
    >It says about a "Recovery Mode" .
    PLEASE HELP ME!

    You are in recovery mode, and you have to restore the device. You can restore it from a backup if you have one:
    Restore to Factory Settings
    Sorry,
    GB

  • Online update of catalog content in CCM by Suplier?

    Dear Experts,
    How does online update/upload of content by Supplier happens in CCM catalog in SRM? Does it go through the approval by content manager during the upload process?
    Is it supported in SRM MDM catalog as well?
    Thanks and regards,
    Ranjan

    In the CCM you can set the default status of the catalog items to the To be approved and once you recieve the file from supplier Content manager can upload and the content approver can approve those items.
    In MDM you have multiple options to handle the content either by a)excel upload  or b)defining the ports and respective map and placing the file in the port for auto upload with MDIS.
    Regards,
    Surya

  • How to continue the running process behind the model dialogue box options ?

    How to continue the running process behind the model dialogue box options like this
    In Updation of K7 user press the Cancel Button
    New dialogue box appear with Yes/No options.
    But the backend updation is going on... not Pause the updation.
    Like this how to do ?
    Please provide me code.

    I don't know, if you mean you have done your form or you have solved the problem.
    It's visible your code is only partly reflecting your screenshot, and that's okay to demonstrate the problem you have given a fine example.
    As you marked my suggestion as solution this may not be needed anymore, but here's how I modified your code and used a self made QuestionBox instead of messagebox.
    The essential part is defining a callback method and letting the QuestionBox call back there. It's not essential I used RAISEEVENT, but it's fine as it has all the behaviour and parameters needed to call back.
    Public oTestFrm
    oTestFrm=Createobject("MyForm_Model_to_NonModel")
    oTestFrm.Show
    Define Class MyForm_Model_to_NonModel As Form
    onxx = 0
    Add Object lbl_DispValue As Label With Top=90, Left = 120, Width = 50, Height=30, Caption=''
    Add Object cmd_Start As CommandButton With Top=120, Left = 120, Width = 50, Height=30, Caption='Start'
    Add Object cmd_Stop As CommandButton With Top=120, Left = 190, Width = 50, Height=30, Caption='Stop', Enabled =.F.
    Procedure cmd_Start.Click
    This.Enabled =.F.
    Thisform.cmd_Stop.Enabled =.T.
    Thisform.onxx = 0
    Do While Thisform.onxx < 90000000
    DoEvents
    Thisform.onxx = Thisform.onxx +1
    Thisform.lbl_DispValue.Caption = Transform(Thisform.onxx)
    Enddo
    This.Enabled =.T.
    Thisform.cmd_Stop.Enabled =.F.
    Thisform.lbl_DispValue.Caption = ''
    Procedure cmd_Stop.Click
    * Here, I want NO PAUSE -- (Show running numbers continuously...)
    * how to control Model to NonModel in Messagebox.
    QuestionBox('Really stop the process', Thisform, 'handleanswer')
    Endproc
    Procedure handleanswer
    Lparameters tlYes
    If tlYes && means Stop
    Thisform.onxx = 99999999999999999
    Endif
    Endproc
    Enddefine
    Procedure QuestionBox()
    Lparameters tcMessage, toCaller, tcCallback
    If Not Pemstatus(_Screen,"oForms",5)
    _Screen.AddObject("oForms","Collection")
    Endif
    oMsgBox = Createobject("QuestionBoxForm", tcMessage, toCaller, tcCallback)
    _Screen.oForms.Add(oMsgBox)
    oMsgBox.Show(2)
    Endproc
    Define Class QuestionBoxForm As Form
    Autocenter = .T.
    AlwaysonTop = .T.
    Minwidth = 200
    Add Object label1 As Label With AutoSize=.T., WordWrap =.T.
    Add Object cmdYes As CommandButton With Caption = "Yes", Width=40
    Add Object cmdNo As CommandButton With Caption = "No", Width=40
    Procedure Init()
    Lparameters tcQuestion, toCaller, tcCallback
    Thisform.label1.Caption = tcQuestion+" ?"
    This.AddProperty("oCaller",toCaller)
    This.AddProperty("cCallback",tcCallback)
    This.Width = Max(This.Minwidth, Thisform.label1.Width)
    Thisform.label1.Left = (This.Width-Thisform.label1.Width)/2
    This.Height = Thisform.label1.Height+48
    This.cmdYes.Left = This.Width/2 - 10 - This.cmdYes.Width
    This.cmdNo.Left = This.Width/2 + 10
    This.cmdYes.top = Thisform.label1.Height+24
    This.cmdNo.top = This.cmdYes.top
    Endproc
    Procedure cmdYes.Click
    #Define clYes .T.
    Raiseevent(Thisform.oCaller,Thisform.cCallback,clYes)
    Thisform.Release()
    Endproc
    Procedure cmdNo.Click
    #Define clNo .F.
    Raiseevent(Thisform.oCaller,Thisform.cCallback,clNo)
    Thisform.Release()
    Endproc
    Enddefine
    I didn't yet introduced a timer for counter display updates. As you see the counter hangs a bit, if you mouse over your form, but it is a way of multithreading without using a separate thread and instead keep the rest of the application active by DOEVENTS
    in the long running loop code.
    Bye, Olaf.
    Olaf Doschke - TMN Systemberatung GmbH http://www.tmn-systemberatung.de

  • How do i download updates to Photoshop when CC isn't working?

    I have a current CC subscription but I've had continual issues with a spinning app wheel in CC app which i've been unable to resolve. How can i download updates to programs like Photoshop without using CC?

    Hi erickv333,
    Please try the below mentioned solutions.
    1. try second solution to update without CC app.
    http://helpx.adobe.com/creative-cloud/help/install-apps.html#Update apps
    2. For spinning wheel, try : App doesn’t open | Progress wheel spins continually
    If you get error while updating try:
    Troubleshoot update issues | CS5, CS5.5, CS6
    Troubleshoot Creative Cloud download and install issues
    Thanks,
    Atul Saini

  • Shutting down causes a request to continue an update

    When I shut down my imac, I frequently get a window asking if I want to continue my update (to what I don't know).  If I click "continue", I get a message saying it can not find a file that is needed for the update.  This file has a very long name, so I can't write it down before the system continues to shut down.
    How do I diagnose this?
    Thanks,
    Jim

    If the file is not listed in Software Update/App Store, check all your browsers download managers.

  • I have an iBook G4 running on OS X 10.4.11 and I just got a new ipod and can't figure out how to get it updated to be able to sync my ipod PLEASE HELP

    I have an iBook G4 running on OS X 10.4.11 and I just got a new ipod and can't figure out how to get it updated to be able to sync my ipod PLEASE HELP

    You could go hunting for a fair price on a refurbished or restored Intel-based Mac or MacBook, as most early models of CoreDuo and Core2Duo can run Snow Leopard 10.6.8, and some much more recent.
    The Apple Store's Special Deals section that is online has some fairly recent examples of hardware with an OS, original accessories as noted, power cord, and complementary one year coverage. Eligibility for extended AppleCare plans are noted & may be available for various items in the store. Subject to availability. Refurbished. Like new. The price difference can be about the same as the additional two year AppleCare plan may cost, so get that too.
    Third party repaired restored or available through other channels vary in quality, quantity, condition, and may be lacking in some or most original accessories; they should include basic hardware as originally equipped and have the boot-install software disc set as intended for that build model & year specification, included.
    Auction sites rarely have that much of a kit together, w/ missing discs, scruffy, extra fees, etc. On the other hand, companies that restore and repair Macs for a living and are authorized Apple service centers may have something, if you aren't in the market for something holiday new or really quick. Older models if reasonably refurbished can still shine years later.
    Hopefully this helps somewhat.
    Good luck & happy computing!

  • How do you secure updates to Robohelp packages?

    Hello all,
    I'm building a knowledgebase type application for our technical group to take out to the field where there is sometimes little to no mobile data signal. Robohelp seemed to fit the bill with it's AIR packaging ability, and I have commenting and auto online update notifications and installation working.
    The issue I'm running into is this:
    If a person who has left the company still has the program, or made a copy of the original .AIR installation file, they will forevermore get online updates.
    I have thought about putting the online update .xml and .air file in a password protected area, but that would mean the automatic update check would obviously fail since it's being asked for login credentials. I don't see any options for password protecting the AIR application either.
    What are my options? Any ideas on how I might accomplish this?
    We do have a secured company website area that employees with proper credentials can access. I do have webspace that can support basic unencrypted or encrypted authentication. I do not want to go a VPN route because the VPN access is terribly slow, and the knowledgebase application is 200+MB.
    Is there a way I can make the user log in to a website through the AIR help application, and then trigger the AIR app to check for an update?
    Thanks in advance,
    --Hans

    Fix the VPN connection.
    Sorry but what you need is a feature change and pending that, there's nothing else I can think of.
    Please follow this link to submit a feature request.
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How often are Ovimaps updated

    While driving recently the road I was on disappeared on my Ovimaps screen. I checked it out after the trip. I had been driving on a section of motorway that had been opened in June 2010.
    I had a look at the map on the Ovimaps website, and the entire section of motorway does appear on the website map though it does not appear on maps installed on my phone. My phone says that I have the most recent version of the maps installed and there is no update.
    So the question is how often do Ovimaps update their downloads to include new or recent changes to road systems? It seems a bit odd to me that a major motoryway opened a year ago has not been included in an update.
    Curious

    I have problems with Denmark on a stretch of motorway that's being expanded from two lanes into three. This means it gets rerouted by tens of metres from time to time and drivers suddenly get the Route recalculation msg. Fine if you're used to the place, but the lanes run in between metre-high concrete barriers in places and the exits are not always well marked.
    In my rural area two towns are correctly named in the v. 1.02 Nokia Map I have on my old E61i, bought in 2007, whereas in Ovi Maps v. 3.04 10wk32b03MW on my current phone, one has been given the name of the municipality that ceased to exist when three were merged in to one on 1 Jan. 2007 are the other bears the name of the new municipality instead of the name it's had since the Middle Ages. The online PC maps are half right. I've informed Nokia and Navteq.
    Performing the map refresh has no effect.
    The online map appears to be down at the moment so maybe they're doing some fixes?
    hughm_nyksj_dk

Maybe you are looking for

  • Macbook Pro is slow & laggy - EtreCheck Done

    Hello Everyone, I have serious performance issue with my MBP (late 2011). I attempted most common steps on this community and it doesn't solve the problem. The boot-up takes about 2-3 minute alone, when you move the cursor across the dock there is a

  • Why is the new iOS 6 so slow?

    Why is the my iPad 3 running so slow now I have updated to iOS 6. Also unable to access the app shop

  • Why is the power draining from my iPad?

    for no reason, my iPad is losing power very quickly in the space of a few hours.  any ideas why?

  • Facebook application is out of order.

    I loaded new update by Facebook application. After then loading, Facebook application has been out of order. O wanna use the application but not open. this application alerts network error

  • How do you get the position of keyboard on the JTextComponent

    hi, i would like to do copy and paste and what i would like to know say i got text "Hello" if i place my keyboard between "H' and "e", i would like the computer to tell me the position of my keyboard! can anyone plz help ? Thx in advance! Sam