How to control goods receipt for order by mb31 if order is not confirmed

Hello friends,
I want to restrict the goods receipt for process order if order is not confirmed or partially confirmed.
Through user status i can control that if order is confirmed than whether to allow goods reciept or not.
But how to achieve my above requirement.
Thanking you guys in advance.

Dear Jitendra,
Check this link
How to stop the goods receipt before issueing the goods for production orde
Regards
Mangalraj.S

Similar Messages

How to retrieve goods receipts for purchse order from mkpf table

Can any one tell me the selection criteria for selecting goods receipt for PO 's from MKPF table.

Hi,
Proceed as below:
EKKO -> EKPO => EBELN "Via Purchase Document Number
EKPO -> EKBE => EBELN, EBELP "VIa Purchasing Document and Item with Transaction Type(VGABE) = 1. Transaction type 1 lists out all GR's for the PO Item.
"Should you require more details of the GR Document,
EKBE -> MKPF => MKPF-MBLNR = EKBE-BELNR & MKPF-MJAHR = EKBE-GJAHR
MKPF -> MSEG => MBLNR, MJAHR
Hope this helps.
Regards
Eswar

How to post good receipt for an inbound delivery with HU in the stock?

Hello,
We have an inbound delivery of a purchase order with 10 Handling Units inside on.
The HU's has been put in a storage bin (by transport order + confirmation) before a good receipt has been posted for the whole delivery.
Due to this it's not possible to post good receipt for the inbound delivery, and the available stock quantity is in minus on zone: '902-GR Area External Rcpts' since the handling units are already in a storage bin.
Can anyone help me on this matter?
Thanks

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

BAPI needed for goods receipt for delivery created from sales order

Hi experts,
I need help.
I want to post goods receipt for the delivery created from sales order. I have tried out BAPI BAPI_GOODSMVT_CREATE but I am not able to post it.
Is there any way to post this? I need BAPI and not FM MB_*....
Thanks & REgards,
Bhavin A. Shah

Hi,
Please refer to link,
https://wiki.sdn.sap.com/wiki/display/Snippets/BAPI_GOODSMVT_CREATE-ABAP
Regards
Shree

Goods Receipt for Inbound Delivery before Transfer Order

Hello Experts,
Below is the normal process in case of GR via inbound delivery.
PO -> Inbound Delivery -> TO -> Confirm TO -> Post Goods Receipt in Delivery.
My client wants as per the normal Purchase Order cycle as below.
PO -> Inbound Delivery -> Post goods receipt in Delivery -> TO - > Confirm TO.
I have found some config for this as per below path.
Logistics - General -> Handling Unit Management -> Basics -> Delivery -> Define Sequence of Transfer Order - Goods Receipt.
I have done these settings but still it is not working.
I have couple of questions here.
1. Are there some more settings required?
2. Why SAP has designed this process in such a way for inbound delivery.
Thanks in advance for your help.
Navin

Hi,
I am working with non HU managed storage location. Can I still use this settings & process for inbound delivery?
I am stuck with one more question. SAP is not allowing me to create Inbound delivery for QM active materials.
The message it is saying is ....
Material CH-1440 1000 cannot be used in inbound delivery because QM is active
Message no. L9528
Diagnosis
QM is active for material CH-1440 in plant 1000. As a result, the material cannot be used in an inbound delivery item because the item is relevant for picking and because WM is active for the item.
This process is not supported in the current release.
Procedure
Execute the putaway using a goods receipt posting with subsequent
putaway in the Warehouse Management system.
Can you please help me with this one also?

Make goods receipt for the items w/difference after the proof of delivery

Hello experts,
I do like to know how finish the process of proof of delivery, when I does have items with differences over the quantities that arrived to my client. For example, one sales order for 20 units. I did the delivery note, and posted the goods issue. Then I did the Proof of Delivery, confirming 19 units and the deviation reasons, saving the document. Then I made my billing document for 19 units of material.
The deviation reasons was a damage material, my questions is: How does make goods receipt for the items with difference over the quantities after the confirming of proof of delivery?
Thanks in advance
Edited by: Johnattan Company on Sep 8, 2009 3:45 PM
Edited by: Johnattan Company on Sep 8, 2009 3:59 PM

Hello Chetan,
Thinking in the process, I have found a solution to do it. If the differences was caused by unknowing reasons, like stolen or whatever reasons and the material will not enter again in the warehouse, we donu2019t need to make any process.
But if the causes was a broken material, a lapsed date expired or unknowing others reasons as a consequence the material will enter again in the warehouse; I have customized a returns order, and a returns item with the option not relevant for billing to conclude the process.
Thanks for your help.

Goods Receipt for packaging material - Item cat. ELP

Hi expert,
I am facing a problem regarding receive Packaging Material Item i MIGO via inbound. Problem detail as below hope you can advise me:
1. I create PO order 1pc of Throttle
2. In Inbound Delivery Screen I do Packing for Throttle by using Handling Unit Function, packaging Material is Carton Box.
3. After Pack complete, Item for packaging material is auto generated in inbound screen:
- Item Cat. of Throttle = ELN
- Item Cat. of Carton Box (Packaging Material) = ELP
4. When i do MIGO via Inbound: there is only 1 item for Throttle is displayed. How to do Goods Receipt for Carton Box item? Do i Miss any setting for that?
Thanks.

i thnk u sould maintain material master with two units one is throttle and second is cartoon.
u shud maintain that how many throttle is equal to 1 cartoon.
this u can maintain directlt in PO (In condition tab, with these two field : OUN and UN). in PO as a OUN ,give throttle n UN , give cartoon in item overview as well as condition tab.
and during delivery change the unit in cartoon. then while migo, material will show in cartoon.
hope it will be helpful.
Thanks
Nisha

How to make good receipt?

how to make good receipt for material?

Hi,
Create it with <b>MB01</b> Transaction
Have a look at this one
http://help.sap.com/saphelp_erp2005/helpdata/en/eb/13750743c411d1896f0000e8322d00/frameset.htm

Non valuated Goods Receipt for materials with multiple account assignments

We have been using multiple a/c assignments for services on purchase orders for sometime with no issues. Recently we used a multiple a/c assignment distribution for a material P/O. this didn't work the same and the Goods Receipt was set as non valuated.
This leaves the cost showing as a commitment and we do not get any actual costs charged at the GR point until we get and post the invoice. This only happens with multiple account assignments, all material P/O goods receipts for single assignments get valuated.
Were not sure why this happens, and want it treated the same. Is there any way we can get these valuated the same way single assignment materials or multi assignment services are.
The non valuated GR flag is getting set automatically, but we can't see where this is coming from for this scenario, so were a bit stuck.
Any advice/direction would be greatly appreciated.
Thanks
Graham

Hi Deshamol, No the materials are all valuated, as mentioned, they all work fine when used as single a/c assignment.
Anupam, Your answer doesn't make sense to me, this is 1 line on the P/O, therefore 1 material. It can't be both valuated and none valuated for each a/c assignment.
I have read in a note there there is a business function that you can apply to get this working, has anybody tried it?
Thanks
Graham

SAP how to determine the account in Goods receipt for purchase order?

We know when we make a Goods receipt for purchase order,we will use the account in GBB and BSX define in OBYC. But where can we find the rule? I mean why system can find the account in GBB and BSX , not the other TEcode?

HI
This is again based on the movement type which SAP has created a link internally.
So if you see when a document is posted it basically derives the GL accounts based on the Movement type,Valuation class,valaution area and so on.
Good luck
Hari

Movement type for a goods receipt for u201CRelease order for a PRqRel"

There is an intercompany sales at our case. Plant B enters the customer order by VA01. The requirements rooting from the customer order are bought from plant A by Plant B. u201CRelease order for a stock transfer requisitionu201D is created automatically by entering the customer order and later using the TCode MD02. By this way Plant A can see the reauirements fort he customer order at Plant B. For the test purposes, I want to make a goods receipt for the u201CRelease order for a stock transfer requisitionu201D. The receipr will be at the Plant A but the customer order is at the Plant B. By the way, I have to point out that Plant A and Plant B are assigned to different company codes. How can I make the goods receipt? I cannot use 561 E. Because customer order belongs to differen company code. I fact, production should be done for this aspect but I donu2019t have enough experience for producing the goods by myself. Which movement type should I use for making a goods receipt for the u201CRelease order for a stock transfer requisitionu201D at Plant A?
Thanks in advance fort he answersu2026

Hi,
This is controlled by the schedule line category In VOV6.
Just check which category is used in your scenarion and change the movement type here. (I think your entry is NC)
They are determined by the item category and MRP type in SPRO - SD > Sales > Sales Documents > Schedule lines
Steve B

Value of inventory after Goods Issue, before Goods Receipt for open order

Dear Experts,
Raw materials R72 and R82 are required to produce Semifinished Product S10.
Semifinished product S10 is required to produce Fnished product F20
On 10th August 2011, I created and release a Process Order for material S10 copying component materials R72 and R82.. Goods issue for component materials R72 and R82 were done for this process order using tcode MIGO (mvt type 261).
It takes four to five days to properly blend components R72 and R82 to obtain S10.
It means Goods Receipt for this process order will be done on 14th or 15th August when this blending has been completed.
Management suddenly issues a directive that stock take should be carried out in the plant on the 12th August 2011, and my process order is still open and cannot be closed ( or goods receipt cannot be done) because blending is yet to be completed.
Please how do I take care of this scenario/situation since Goods Issue has been done already?
How will the Accountants see or get the correct value of inventory?

When I run WIP Calculation for my Process Order, what will be the effect ? I mean what accouts are updated by WIP Calculation within a period (not across a perion or at period end)?
GI values issued to the Process order will come into WIP GL .( Since your client want to know the stock take should be carried out in the plant on the 12th August 2011- we are doing WIP calculation)
> After this WIP Calculation is run, and say about 2days later, Goods Receipt for this process order is to be posted, what steps am I suppose to carry out?
After GR Made, Run a WIP calculation again for the order so that The WIP from the GL account will get reduced ,now WIP= (GI value + confirmation ) -(GR Value),
Check in DEV system before doing in PRD,
On Month end, do the variance calculation and do the settlement

Reverse Goods Receipt for Process Order

Dear All,
Please tell me how to reverse the Goods Receipt for Process Order for which already QM is cleared for that Particular Lot.
But Confirmation is still yet Pending.
I tried MIGO - Cancel - Material Document. But it is showing a message "Process Order already processed".
Regards
buss

Hi,
Use t code MB31
Movement type 102
Stock type = Unristricted use.
Reverse by entering above information then you have to manually cancel the inspection lot.
Regards,
Vishal

Message no. RU 195:Automatic goods receipt for order 619271463 is not possi

dear expert:
when i confirm the production order via co15 ,sytstm prompt :
Automatic goods receipt for order 619271463 is not possible
Message no. RU 195
Diagnosis
Order 619271463 contains several operations, which have a control key which indicates "automatic goods receipt".
However, an automatic goods receipt is only allowed once per order for the following reason:
If the automatic goods receipt is posted more than once, this would lead to incorrect stock quantities.
Procedure
Check the control keys of the operations in order 619271463. Change the control keys in such a way, that an automatic goods receipt occurs for one operation only.
production order is confirmed but it cann't be delivered automatically.
help me analyse it .
best reagards.

Hi,
In normal scenario in a production order each routing operation will consist a control key with settings for automatic goods reciept.
So in a production order you can use only one control key with automatyic goods recipt. This will be the last operation of the order. From message mentioned by you it is showing as may u have mentioned auto goods reciept for more than one operation.
PP01 is normal confirmation control key & PP99 is for milestone with auto goods reciept. PP95 - w/o milestone with auto GR.
Please check control key & correct it.
Hope this will help you.
Regards,
Ashish

"Goods receipt for purch. order" is not allowed (WBS P-0400-1-1-8010-1)

Dear All,
Can you tell me how to do?
"Goods receipt for purch. order" is not allowed (WBS P-0400-1-1-8010-1)
Message no. BS007
Diagnosis
The current status of object 'WBS P-0400-1-1-8010-1' prohibits business transaction 'Goods receipt for purch. order'.
Procedure
To process business transaction 'Goods receipt for purch. order', you first have to change the status of object 'WBS P-0400-1-1-8010-1' to allow the transaction 'Goods receipt for purch. order'.
This gives you an overview of the system and user statuses that affect the transaction. A transaction can only be executed if there is at least one status that allows it and there is no status that forbids it.
Transaction analysis

Hi Zhang,
Goto Transaction CJ02.
Now goto Edit button in Menu.Click on Status , then System/User Status.
Here u can find the current status of Project.
Later once again goto CJ02.
Now goto Edit button in Menu.Click on Status -- Release.
Once released u will be able to post GR.
Regards
Ramesh Ch

How to control goods receipt for order by mb31 if order is not confirmed

Similar Messages

Maybe you are looking for