How to control outer group data based on inner group data

Hi ,
Please can anyyone help me on this issue.
I have one invoice header record and for that invoice there are 15invoice lines record.
1)my requirement is i want to print the 10 invoice records in first page and remaining records,in next page.--this i had achieved*(byusing solution posted inthe forum)*
i have the layout like this
image:!C:\Documents and Settings\madhu.rn\Desktop\layout.jpg!
main group data table
i had inserted another table for inner group data.
again main group data in main table.
2)But here i don't want print header info again in second page.
3)i am not getting the line numbers in inner group in ascending order ,i am getting in descending order. how to get them in decending order
4) if lines record are going to second page i don't want to print subtotal,tax,total (these are main group data)in first page, instead of this
in place of
subtotal-- want to print Continued......
Tax- null
Total:page 1 of 2. like that i want to print in first page.
i want them to print in second page.
5)the bottom portion also not to print on second page.(after innergroup data,there is some main group data)
i have one doubt by using inner group data whether we can control outer group data.
if any of my requirement's are not possible to meet ,please provide me the information.
This urgent for me,have to submit it.
Edited by: user644268 on Feb 8, 2010 11:10 AM

Hi,
Please help me in this issue. Its an urgent requirement.
Thanks in Advance..

Similar Messages

How to get the pricing hierarchy based on the delivery date for sales order

Hi,
How to get the pricing hierarchy based on the delivery date for sales order other than system date.
My requirement is to get the Pricing hierarchy based on the delivery date other than system date.
Waiting for kind response.
Best Regards,
BDP

HI Sai,
please refer teh document already how to write FM based extration on generic extractors.
and here the logic to find the latest records values:-
-> get the data in an internal table
->Sort the internal table data based from date descending
-> Using READ statement , we can read the first record of the table which is nothign but your latest record.
Regards.
Sakthi

Function module to give a date based on a particular date and interval.

Hi there,
I am writing a code where I need to to find another date
based on a key date and and an interval.
Is there any function module where I pass the date and the interval
(say 30) and it gives me a new date after subtracting 30 from it.
Or is there any piece of code which does it?
Thanks in advance.
Regards,
Kate

hi Kate,
you can try ?
data : date2 like sy-datum.
date2 = yourdate - 30.
hope this helps.

How to print out the Forms and Table fields relationship, data mapping?

I create a forms and tables relationship inside the Form Developer 11g, once I created the Data relationships between the form data field and the Table column name. I don't have any command to print it out, such as Layout Wizard.
Are there any programs on Windows platform can print it out?

hi all,
i have try to do this
public static void Readbinary() throws Exception
          String file = "D:\\05-09.190501+0800";
          DataInputStream dis = new DataInputStream(new FileInputStream(file));
          //but then how to read the content ??????can you give me more hint ?????
i have find the netflow v5 structure by C
struct NFHeaderV5{
uint16_t version; // flow-export version number
uint16_t count; // number of flow entries
uint32_t sysUptime;
uint32_t unix_secs;
uint32_t unix_nsecs;
uint32_t flow_sequence; // sequence number
uint8_t engine_type; // no VIP = 0, VIP2 = 1
uint8_t engine_id; // VIP2 slot number
uint16_t reserved; // reserved1,2
struct NFV5{
ipv4addr_t srcaddr; // source IP address
ipv4addr_t dstaddr; // destination IP address
ipv4addr_t nexthop; // next hop router's IP address
uint16_t input; // input interface index
uint16_t output; // output interface index
uint32_t pkts; // packets sent in duration
uint32_t bytes; // octets sent in duration
uint32_t first; // SysUptime at start of flow
uint32_t last; // and of last packet of flow
uint16_t srcport; // TCP/UDP source port number or equivalent
uint16_t dstport; // TCP/UDP destination port number or equivalent
uint8_t pad;
uint8_t tcp_flags; // bitwise OR of all TCP flags in flow; 0x10
// for non-TCP flows
uint8_t prot; // IP protocol, e.g., 6=TCP, 17=UDP, ...
uint8_t tos; // IP Type-of-Service
uint16_t src_as; // originating AS of source address
uint16_t dst_as; // originating AS of destination address
uint8_t src_mask; // source address prefix mask bits
uint8_t dst_mask; // destination address prefix mask bits
uint16_t reserved;
but how to translate the structure to java,then get the data from the file ?
Edited by: 903893 on Dec 21, 2011 10:52 PM

How to Sort transported KM content based on the creation date

Hi ,
I transported KM content through ICE offline transfer. all the files are copied. but the problem is all are copied with the todays date as modified date.
but I need to sort these based on the creation date.
all these files are with the xml templates.
Can only help in this regard
Thank you

Hi,
Enter the format that you have defined in the configuration of the property in the Additional Metadata parameter. Use the syntax customFormat=<pattern>.
In this link, you have at the end screenshots where to navigate in KM to see the property metadatas of your property:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/645d4357-0701-0010-07bd-a2ea8c4d0aaf
Here see the Defenitions of the KM Metadata Properties:
https://wiki.sdn.sap.com/wiki/display/KMC/DefenitionsoftheKMMetadata+Properties
Regards,
Praveen Gudapati

ACS 5.3 Group Mapping based on AD group membership

Hi,
I am configuring a new ACS 5.3 system. Part of the rules is that I want to match the users specific AD group membership, and match appropriatly to an identity group.
What i'm trying to do is say that if the user is a member of the AD Group (G-CRP-SEC-ENG) then associate them with the Identity Group SEC-ENG. The under the access service, authorization portion, i assign shell profiles and command sets based on Identity Group.
It seems that the ACS server will not match the AD Group for the user, and it will match the Default of teh Group Mapping portion of the policy every time.
I tried several configuration choices from : AD1:ExternalGroups contains any <string showing in AD>, AD1:memberOf <group>.
Is there something special i need to do in the Group Mapping Policy to get it to match and active directory group and result in assigning the host to an Identity Group?
Thank you,
Sami

Ok, my case is like this.
I use ACS 5.3 for VPN authentication, using AD and an external RSA for token authentication (2 factor authentication)
I didn't add all the VPN users in the ACS, because it will be troublesome, the users authentication will be managed by AD and RSA server.
In some cases where we need to restrict a group of user to only access certain resources, downloadable ACL is used.
Following the Cisco docs, i manage to get downloadable ACL works when the authorization profile matching criteria is username, but when i change the matching criteria to Identity group, the downloadable ACL won't work.
I have a case with Cisco engineer now and still in the middle to sort things out.
The advice from the Cisco engineer is to have the Access Service set to Internal User instead of RSA server, but that will require us(the admin) to import all the VPN users into the ACS database.
Wondering whether there is a fix for this.
Thanks.

Updating product revenue close date based off opportunity close date

We do not use the product revenue close date, only the opportunity close date. We need to get the fiscal month of the opportunity close date but we have several reports the need to use the opportunity product history area and that does not contain the fiscal month for the opportunity. If we did a combined report, we cannot offer the user any prompts.
Does anyone know how to get the opportunity close date fiscal month from the opportunity products area? Is there a way to update the product revenue close date when the opportunity close date it updated?
Thanks

Hi David,
In the universe you describe you have the opportunity 'Close Date'. Use a 'case-when' expression to create the 'Fiscal Month' you need.
Other than that you can use the JoinFieldValue function in the application to retrieve the opty close date, but that will require you to update product revenue for it to trigger which probably won't work for you.
Good luck.

How to control IE10's "Compatibility View settings" via Group Policy

First
of all thanks for taking the time to read this. I must let you know that I have limited experience with Group Policy so here it goes...
Domain Controllers are 2008 R2 Datacenter and client computers are Win7 Pro with IE10
I need to add several sites to the "Compatibility View settings" in IE10 and have these pushed out via Group Policy.
I followed this to enable the "Use Policy List of Internet Explorer 7 sites:"
Use
Policy List of Internet Explorer 7 sites
I even added the settings to both User Configuration as well as Computer Configuration. However the computers on the domain wouldn't show these sites in
IE even after forcing a GP update (gpupdate /force)
Yes I did use top level domain names.
Next I installed the Administrative Templates for Windows Internet Explorer 10 on the DC:
Administrative Templates for Windows Internet Explorer 10
this gave me an Inetres.adm file while I put in the same location as my other .adm files that Group Policy Manager sees (located at C:\Windows\SYSVOL\domain\Policies\{31B2F340-016D-11D2-945F-00C04FB984F9}\Adm)
I do see a bunch of .ADMX files located at C:\Windows\PolicyDefinitions
on the DC. I also see a lot of .ADML files located at C:\Windows\PolicyDefinitions\en-US.
Where is my Central Store located that my Group Policy references? How do I know what location GP is reading from?
Now I installed the Administrative Templates (ADMX) for Windows Server 2008 R2 and Windows 7 from here:
Administrative Templates (ADMX) for Windows Server 2008 R2 and
Windows 7
This gave me a "Win7-2008R2-admx.msi" package that I installed. I took the defaults and extracted contents to:
C:\Windows\PolicyDefinitions\Server 2008 Win7\PolicyDefinitions
Are all of these .ADMX files supposed to be placed into my Central Store?
If I mouse-over "Administrative Templates" in Group Policy Manager is says that the policy definitions are retrieved from the local machine.
I then right-clicked on top of "Administrative
Templates" in Group Policy Manager and highlighted Inetres and selected Delete.
While in Add/Remove Templates I click on Add and it defaults to looking for "Policy Templates" and will not let me select and .ADM/.ADML/.ADMX files.
What am I doing wrong here?
How do I know that I'm using the most recent Inetres file?
How do I know which file Group Policy Manager is using to manage the IE settings that are in:
User Configuration->Administrative Templates->Windows Components->Internet Explorer->Compatibility View->Use Policy List of Internet
Explorer 7 sites
or
Computer Configuration->Administrative Templates->Windows Components->Internet Explorer->Compatibility View->Use Policy List of
Internet Explorer 7 sites.
Is there anything else you can suggest?
Many, many thanks in advance for any response

Hi,
Regarding your question, usually we create a Central Store for Administrative Templates (Both .admx and .adml files), and create a folder that is named PolicyDefinitions in the following location:
\\FQDN\SYSVOL\FQDN\policies. The .adml files on the Windows computer
are stored in a language-specific folder. For example, English (United States) .adml files are stored in a folder that is named "en-US." When you have copied all .admx and .adml files, the PolicyDefinitions folder on the domain controller should contain the
.admx files and one or more folders that contain language-specific .adml files.
Please refer to the following articles. You will get more helpful details about the Central Store for Group Policy Administrative Template files.
How to create the Central Store for Group Policy Administrative Template files in Windows Vista
http://support.microsoft.com/kb/929841
Windows 7, Windows Server 2008 R2 and the Group Policy Central Store
http://blogs.technet.com/b/askds/archive/2009/12/09/windows-7-windows-server-2008-r2-and-the-group-policy-central-store.aspx
Based on your description, I understand you enable the setting “Use Policy List of Internet Explorer 7 sites”. However, didn’t show any sites in IE in client even after forcing a GP update
(gpupdate /force). Please use command “gpresult” in clients to collect the GPOs, and then check whether the GPO contain the setting “Use Policy List of Internet Explorer 7 sites” was applied to clients or wasn’t.
In addition, you also can change the related setting by using registry directly.
Follow the path of the registry:
HKEY_CURRENT_USER->Software->Policies->Microsoft->Internet Explorer->BrowserEmulation->PolicyList. (Create registry folders
manually if not present)
Right Click
PolicyList ->New->String Value->Enter the name of the website. (Both under ‘Name’ and ‘Data’. For example,
Value name: example.com Value data: example.com)
There is a similar question, please read as a reference.
Add manually URL on Compatibility View List in IE10
http://social.msdn.microsoft.com/Forums/ie/en-US/5a15e861-d106-471e-a968-fdea15e31c45/add-manually-url-on-compatibility-view-list-in-ie10
Hope this helps.
Best regards,
Justin Gu

How to hide screen group tab based on account group in XD01/02

Hi Folks,
I have added two screen group( custom tabs like 'general data' ) in XD01 screen. Based on the input parameter 'account group' I want to hide(supress) one of the tab. How can I read the account group no?
Thanks and Regards,
Kawish.

Hi,
Can you try to access the field like below. Just try to access the account group from main program in the method.
field-symbols: <lf_KTOKD> type KTOKD,
data: L_KTOKD type KTOKD.
assign ('(SAPFM02D)KNA1-KTOKD') to <LF_KTOKD>.
if sy-subrc = 0.
l_ktokd = <LF_KTOKD>.
endif.

How to find out Which LineItem is having the wrong data

Hi All,
This is Idoc--File scenario
Iam sending the Idoc from R/3 and it may have several Line items and related data.
If One line item data is wrong also the Idoc will be errored Out in MONI,for this i used UDF in mapping to through the Exceptions. So i have to goto WE05 in R/3 and i have to check each and every line item for wrong data and then i will repost it.
the thing is how can i find out the Particular line item is caused for this Error.
REgards

Hi Sarvesh,
No, in MONI it will not take us to the correct Lineitem which is having the wrong data.
That is only the problem here.
Any Views.........
Regards

How to find out the failed sql command and its data from DEFERROR

Hi,
has anybody a procedure or some other possibilities to read the content of column USER_DATA of the advanced replication view DEFERROR in order to find out the failed sql command and its column values?
Thanks in advance.

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

How to Find out the Name of the Table in Data Sources

Hi All,
How Can i find out the table names used in data Sources.
For EX. Suppose I want to find out the table Names in R3 Used In GL Data Source 0FI_GL_4.
Thanks in Advance.
Vaibhav A

Hi,
Usefull link:
https://wiki.sdn.sap.com/wiki/display/BI/BW%20SD%20MM%20FI%20DATASOURCES
Regards.

Filteration of BP Master Data Based On BP Group

Hello All,
I have a requirement of blocking those BP Codes to display in the Business Partner Form for a specified BP Group whether
the User select through Choose From List or Navigate the Form.But the Business Partner details will not be visible to the user
until the BP Group matches .
Is that possible through SDK specially the Navigation part .
Please provide sample codes for that .
Thanks & Regards,
Amit

Hi Amit,
How did you manage to do this? As I am into a smilar requirement especially the Choose From List.
I am not able to restrict the choose from list to display based on a selected Sales Person.
It would be of great help if you would provide code sample to restrict the Choose From List to display BP's only for a particular Sales Person.
Many Thanks in Advance,
Regards
Sameer Shingala.

How to Control Finished Product Price based on Raw Material

Hi Experts,
Our client manufactures Steel Products where basic Raw Material is Steel.
Customer will give annual contract/Sales Order on the rate prevailing on the contract date. But there is clause that if Steel prices increase / decrease by 5% then correspondingly Finished product price will change by 3%.
How can this be mapped in SAP where by based on Raw Material price, Finished product can vary?
Regards

Hi Ajay,
Please go through this link. you will get an idea
Price list change according to raw material cost
Thanks
Dasaradha

Regarding Deletion or Archiving the Data based on Account Group

Hi All,
How to find the solution for Deletion or archiving the vendors in different SAP servers which is haviing account group.
And tell me what is use for SARA Tcode?
Please send documents or links..
Can anyone help us ....its Urgent.....
Thanks,
Raj..

hi,
F58A - Archiving of Vendors.
u can find all database tables for a particular object using SAra tcode.
reward if hlpful.

How to control outer group data based on inner group data

Similar Messages

Maybe you are looking for