How to control picture animation

hi every one
i want to control picture animation, i mean i have picture of rotating motor so i wanna when i press button it rotate and if i press again it stop rotating
can anyone help ?

duplicate post
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

How to control jsr184 animation player

I want to control the animation sequences separately from 0 to 670ms670 to 1000ms animation
How can I make
thanks a lot

duplicate post
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to control text animation duration?

I found a similar question to this in a forum for a different product, but the only answerer didn't know the answer and merely recommended "experimenting around until you figure it out," which is possibly the most unhelpful answer ever. Lol.
My question is: How do I make it so a text animation brings the text in and then allows the text to sit on the screen normally for some time after that? Currently, when I add a text animation, it insists on extending the entire duration of the clip, from beginning to end. How do I confine the animation to, say, the first 2 seconds of the text, and then allow the text to sit normally for 8 seconds after that?

If you are familiar with Keyframing in Flash, then it will be so very easy in PrE. You already have the concept (the hard part), and all you need to get will be details on the mechanics (where buttons are located, etc.) in PrE.
Steve takes you though all of those mechanics, and introduces you to the Effects Control Panel, which you will use just like the Stage in Flash (if they still call it that). The look is a bit different, as you are working in Video, though you are animating in the same way. You set the Keyframes for whichever Effect you are working in, and PrE will create the Tweens for you.
I actually like the interface (the Effects Control Panel) in Premiere better, than I did the one in Flash Studio 8 (my last version), but then I came to Flash from a film background. When I started doing Video, it was like meeting up with an old friend, however the concept of Keyframes from Flash proved very, very useful.
I do not recall the last time that I used any animation Preset, as Keyframes give me so very much more power. The same for creating PiP, whether animated, or not.
Good luck, and explore, experiment and enjoy!
Hunt

How to control keyframe animation by Javascript?

Hallo,
I've one question. I have created an animation in 3D Max and now I want to control it Acrobat 3D PDF by JavaScript, such as STOP and PLAY.
Thanks for your answers.

Hallo,
I've one question. I have created an animation in 3D Max and now I want to control it Acrobat 3D PDF by JavaScript, such as STOP and PLAY.
Thanks for your answers.

Which is the best tool for PRC animation? and how to control it with javascript?

Hi I created animations through Deep Exploration. But I want to know how to create PRC animation with tools and how to control it? I already tried with tetra4D but the javascript can control only u3d format. I have no idea to control prc animation. Please let me know.
Thanks and Regards
Chenet0005 @ Chenthil Kumar

PRC files don't support embedded animations.
You can still control the mesh directly with 3D JavaScript (e.g. by using rotateInPlace and a time event handler) but you can't import a timeline as you can with U3D.

How to create scroll controlled svg animations in Edge animate cc

Since I am a beginner in Edge animate, I am very confused about svg animations in Edge animate. I want to create an effect like this http://tympanus.net/Development/SVGDrawingAnimation/index.html. In this page the animation is set to autoplay, I will controll my animation using scroller bar in adobe muse cc. Please tell me how to animate svg images like this.
Thanks in advance

Hi bhardwajaralhul517,
Found something that could help you get started
Using parallax scrolling in Animate with a single line of code | EdgeDocks.com
How To Create A Parallax Scrolling Website | Web Design Principles
Thanks,
Preran

How do I control the animation in the iframe?.

hi everyone;
normaly;i can stop animation by --> AdobeEdge.getComposition("id").getStage().stop();
how can reach an animation in iframe and stop it?
How do I control the animation in the iframe?.

Try wrapping the call in a bootstrapCallback function.
AdobeEdge.bootstrapCallback(function(compId)) {
var stage = AdobeEdge.getComposition(compId).getStage();
-Elaine

How can i control gif animations?

I have a project in which i need some animations. The animations all have been created in After Effects. Now I can use the png sequences, but these are very big and i need a lot animations running on the same time. So i would rather use the gif animations. So my question: I can control when to play the gif animation but i can't play it more than one time. Is there a solution?
Thanks for answering!
Jannis

Hi there,
I see...you're controlling when it displays. Technically, that's not the same as controlling the animated GIF; you're just controlling when you see it. EA recognizes GIF only as an image format, and can't make the browser play from the beginning other than the first time it's displayed or when it loops back (if your animated GIF loops).
However, you could do something similar with an extra image file or two, jQuery, and css background-image to "load" the GIF file into a transparent image. Here's a link to an example that always runs the animated GIF from the beginning:
https://creative.adobe.com/share/52f15194-875b-4604-8857-9b9bf5f78e04
A single line of code that does the work is in the playBtn click handler.
hth,
Joe

How to control timeline sound of external SWF

Hi All,
Basic Intro:
I am new in Action Script and trying to create a video tutorial framwork. In this I have lots of animated SWF files in all the files I have multiple scenes as those are 5min. to 10 min. each and all the files have the relevent background and nurration voice place directly on the TIMELINE frame by frame to match lip syncing animated chreactors.
My file structure :
Login.swf with login box is embedded into the Index.html
After logged in it will load another SWF which is Control panel.swf
3. Controlpanel.swf has the controls to control the loaded external swf files i.e.: Chapter menu, Play, pause, replay, volume-bar, next and previous buttons.
By Default Controlpanel.swf will open chapter1.swf as soon as user logged in so no one need to open 1st file.
Here user can navigate to other chapter swf file through Chapter menu or Next and Previous buttons.
All files are loading and playing properly, here I am trying to control the animation and Sound both at a same time with Pause, Play and Replay through relevant buttons.
Problem:
By pressing “Pause button” animation stops but not the sound. Sound remains playing, and if I replay the swf by “Replay button” than animation restarts but sound also restarts that overlaps already playing audio.
Question: So could anybody help me finding out how to:
1. Pause the sound with animation by the same click of Pause button, and
2. Stop the sound with animation by the same click of Stop button, and
3. On replay it should stop playing the previously running audio and restart it with the animation like fresh loaded file, it should not sound overlapping.
Constraints:
Here I am using the sound file on the same time line of each individual swf file which I cannot add into any single movie clip because all the chapter swf file are having multiple scenes in it.
For my problem I have already done a lot of browsing online in various forums and didn't find the solution. So here I am sharing the complete information regarding the project and wishing to get some good solution out here but if I missed any helpful information please ask me anytime and please help me to quickly find out the solution.
Thanks a lot to all of you in advance to help me.

create one global sound variable
you can write when you are pressing pause button
globalsoundvariable.setVolume(0)
to play
globalsoundvariable.setVolume(100)

I need to know how to copy pictures to a cd with the captions showing, elements 8 and windows 7

I need to know how to copy
pictures to a cd with the captions showing, elements 8, windows 7

Here are some suggestions. Perhaps others will have even better ideas.
1 -- for viewing on a Windows computer, you can experiment with making a PSE Organizer slide show creation in which you specify to show the captions. Then save the Output of the slide show as a WMV file that the recipient could play on a computer with Windows Media Player.
If you have a DVD burner on your PC, you can also use that WMV file as input to the Windows 7 DVD Maker program for making a TV playable DVD. And if your recipient(s) who will view on a computer have DVD readers, you could make video DVDs playable on computers or TV DVD players instead of using CDs.
The limitations of this approach are that this wmv file you create is really a video file so
-- it advances photo slides at the rate specified when you create the slide show
-- the choices to save a wmv file are not very high resolution so that recipients who have high resolution monitors will not see the photo images are not getting the benefit of seeing the photos at their best
-- your recipients can't print from this video slide show
2 An entirely different approach is to
-- For each individual photo, make a copy of the photo file and depending on how high resolution your originals you might want to resize down to monitor viewing sizes.
-- Then use the PSE Editor Text Tool to place the caption on a layer above the photo. (I think that you could display the existing caption and then do a copy and paste so that you don't need to retype everything.)
-- You should save this photo copy with the text as a uniquely named JPEG file. Use the file names to control the sequence in which you want the viewer to see the photos. (Don't save as a PSD because others probably can't read the PSD format).
-- Then use your computers CD burning software to burn a folder containing all those jpeg files with the captions to CD
This approach is a bit of work for each photo and you did not say how many photo files you will be doing. However,
-- computer users should be able to display the jpegs as high resolution photos on their computer as well as optionally print from those photo files
-- many TV DVD players can play (display) jpg files from a CD disc which also gives recipients the opportunity to view the photos on their larger TV screen
Process 2 may seem complicated but once you get started I think it will be more of a production line.
ADDITION
Do you have any portrait orientation photos included with those you wish to send ? If yes, we might need to discuss some additional processing for them.

How to load and display the external flv video files in dynamicly and the how to control the flv fil

How to load and display the external flv video files in dynamicly using AS 3.0
and How to control the flv file add the play paus button and add seekbar.
I have using to load the flv file following code
var flvPlaceHolder1:MovieClip = new MovieClip();
var vid1:Video = new Video(734, 408);
flvPlaceHolder1.addChild(vid1);
addChild(flvPlaceHolder1);
flvPlaceHolder1.x = 1059;
flvPlaceHolder1.y = 152;
var nc1:NetConnection = new NetConnection();
nc1.connect(null);
var ns1:NetStream = new NetStream(nc1);
vid1.attachNetStream(ns1);
var listener1:Object = new Object();
listener1.onMetaData = function(evt:Object):void {};
ns1.client = listener1;
ns1.play("GV-1600 TURNING.flv");
ns1.addEventListener(NetStatusEvent.NET_STATUS, statusChanged1);
function statusChanged1(ns1:NetStatusEvent):void
         trace(ns1.info.code);
        if (ns1.info.code == 'NetStream.Buffer.Empty')
             trace('the video has ended');
             removeChild(flvPlaceHolder1);
             //trace('removeChild');
            gotoAndPlay(1786);
then how to add the play,paus ,full screen button    and   seekbar,volumebar.

I have to Create the flash presentation for our company product
In this presentation the left side the text animation are displayed then right side the our product video is displayed.
In this presentation i need the following option :
1, The first product video and animation is finished then the next product is played
2, then the video displayed (size width and height 400x300) , I click this video to increase the size(ex:1000x700)
3, then the playing video i control it play, stop, paus button and volume bar, seek bar.
4, then this presentation is displayed on 42 inches LCD TV so this full presentation is run full screen.
I have finished first two steps 1 and 2
the following are the screen short and code:-
code :-
var count=0;
var flvPlaceHolder2:MovieClip = new MovieClip();
var vid2:Video = new Video(734, 408);
flvPlaceHolder2.addChild(vid2);
addChild(flvPlaceHolder2);
flvPlaceHolder2.x = 1059;
flvPlaceHolder2.y = 152;
var nc2:NetConnection = new NetConnection();
nc2.connect(null);
var ns2:NetStream = new NetStream(nc2);
vid2.attachNetStream(ns2);
var listener2:Object = new Object();
listener2.onMetaData = function(evt:Object):void {};
ns2.client = listener2;
ns2.play("GS-4000.flv");
this.addEventListener(Event.ENTER_FRAME, BtnFadeIn2);
function BtnFadeIn2(event:Event):void
    if (this.currentFrame == 387)
        /*flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
        trace('Screen size is changed');*/
        if(count==0)
        flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
        count++;
ns2.addEventListener(NetStatusEvent.NET_STATUS, statusChanged2);
function statusChanged2(ns2:NetStatusEvent):void
    trace(ns2.info.code);
    if (ns2.info.code == 'NetStream.Buffer.Empty')
            trace('the video has ended');
             removeChild(flvPlaceHolder2);
             //trace('removeChild');
            gotoAndPlay(433);
flvPlaceHolder2.buttonMode=true;
flvPlaceHolder2.addEventListener(MouseEvent.CLICK,home2);
function home2(e:MouseEvent):void
    if(vid2.width==734 && vid2.height==408)
        flvPlaceHolder2.x = 30;
        flvPlaceHolder2.y = 140;
        vid2.width=1800;
        vid2.height=800;
    else
        flvPlaceHolder2.x = 1059;
        flvPlaceHolder2.y = 152;
        vid2.width=734;
        vid2.height=408;

How was this "flash" animation done?

How was this "Flash" animation done?
http://www.templatemonster.com/flash-templates/15812.html
There is a "flash" that goes down the sholder of a man in this Flash intro page. It is a series of jpg images. Do you know how this can be done or which program was used? I want to chage the page of it.
Thanks, Steve

Hi Steve,
I'm pretty sure it's done with a mask. You have the man picture layer and the border layout masked by a symbol (maybe a square or rectangle) above it.
If you want to know how to use mask in Flash, just ask Google. There is a bunch of tutorial on the web.
Hope it's a good start for you !
Martin
http://www.martinc.biz

How to create the animation div dyanimcally using jquery+javascript

Hello,
after a week of researching and without getting the full result i decided to upload new discussion here and maybe some of you guys will help me.thanks in advance.
include the file:

    <meta http-equiv="X-UA-Compatible" content="IE=Edge">
    <script type="text/javascript" charset="utf-8" src="animate_edgePreload.js"></script>

html code:
<div id="Stage" class="EDGE-70798230"></div>    if i put it like this of course everthing works fine..i can put more with different id's and they will work fine...
my problem:
i dont know how many of this animation i will need...depends of what my server will give me in the response...so i need to create them dynamically...
i tried lots of things:
$("#newAnimation").append('<div id="Stage2" class="EDGE-70798230"></div>');    of course with this nothing happend...it even dont get the symbols under stage..and not any of the css...
$(".EDGE-70798230#Stage").clone().appendTo("#newAnimation");
$("#newAnimation").children('#Stage').prop('id','Stage2');   then mroe css changes and just then i can see the animation but it doesnt work..."play is not defind" when i try to run the animations..
i know there is some function that called createChildSymbol/createSymbolChild but none of them work for me...
i use jquery mobile..so to start the animation for example i do $.Edge.symbol.get($("#Stage")).play();
i tried to use the loadResources etc....doesnt work too..
anyone have some idea what i can do? it is possible?

joel pau thank you for all the support.
now i will explain the anwer if anyone else will be stuck with the same problem.
first of all in edge animate need to mark all the things that created and "convert to symbol"(mark all and right click).
second:
in the top of your html file you got the script to the edge_preLoad.js .....
so now in your js code:
lets say we use append to add new div to our code and now we got <div id="new"</div>.
$.Edge.getComposition("yourCompositionID").createSymbolChild("yourSymbolThatCreatedInStepO ne","#new");
like this you can get new animation of the same composition.
if you want to conroll the animation you just need to take the id of the new symbol your created using jquery or any way you like.
and example of control it:
$.Edge.symbol.get("#theNewID").play();

Toolkit for CreateJS: How to control the main timeline from outside the canvas.

Hey Everyone,
I'm currently trying to do something simple, but my animation breaks whenever I attempt to change my code. I have created a basic animation in Flash where an object moves from the left side of the canvas, to the right, and then loops from the last frame to the first frame. Nothing else. The animation is simply put on the main timeline. I exported the animation with Toolkit for CreateJS through Flash's extension and the animation runs as it should. I am trying to start and stop (restarting from the first frame) the animation with mouse over and mouse off events. I want the events to fire when moused over/off a div OUTSIDE the animation's canvas tag. Is this possible with CreateJS? I'm trying to figure out how to control the main timeline without being inside the canvas tag.
Example HTML:
http://www.thephotoncore.com/testing/example_test.html
Example Code:
<section id="container">
<canvas id="canvas" width="550" height="400" style="background-color:#cccccc"></canvas>
<section id="animation_control">
    <p>Roll over to start and stop animation.</p>
</section>
</section>
Thanks again for the help!
-DJ

Hi DjPhantasy5,
All movieclips on the stage are children of the stage,
So on the "mouseover" all movieclips on the stage could be stopped with stop and on the "mouseout" all children could be restarted with gotoAndPlay like this:
function Stop()
          if (stage && stage.children)
                    var i, l = stage.children.length;
                    for (i = 0; i < l; i++)
                              var child = stage.children[i];
                              if ("stop" in child)
                                        child.stop();
function Restart()
          if (stage && stage.children)
                    var i, l = stage.children.length;
                    for (i = 0; i < l; i++)
                              var child = stage.children[i];
                              if ("gotoAndPlay" in child)
                                        child.gotoAndPlay(0);
See http://www.liauw.nl/forums/adobe/djfantasy5/index.html
But it is also possible to expose "ball1", for example, by adding it to the document.
This can be done by adding code to "ball1" like so:
/* js
document.ball1 = this;
Then the stopping of the animation would look like:
function Stop()
     if ("ball1" in document)
          document.ball1.stop();
etc.
Have fun!
Ronald

How to save pictures with the config file "Write Key.vi"

hi all,
On my front panel I've few controls pictures containing photos (JPG type) . The user can select the photo he wants using the classic file dialog box.
Usally I use the config files VI's to save the control values from one run to another one. In the config files VIs, I use the polymorphic "write Key.vi" wich accept only booean, I32, U32, path, and string dada type, but no picture !
I've tried the "flatten to string" fonction (picture --> flatten to string --> writekey.vi) , no broken wire but the conversion is very very too long and to heavy (20Mo a key!).
another way, would be to write in a xml file, I've also tried but I've always get the 1104 error: No end tag was found for an XML start/end tag pair.
can someone help me.
what is the best way for retrieving controls pictures with photos

Hi GerdW
Many thanks for your quick answer. Always happy to get advises from fellow programmers.
You suggest to use the "path" input of the "write key.vi" (configuration file utilities) to retrieve photos that a user would have selected in a previous run. Could be a good solution in a number of applications but what I would like to do is like in a excel or word file. Once a photo has been embeded in one xls file for ex., I find it back each time i open this xls file, even if the original photo's file has been deleted or if my application runs on another computer.
xml file looks interesting for that purpose (i mean used as config file). I can easily store in a xml file a labview picture (like a colored rectangle e.g.) but when i try with a photo (wich is a also a picture) labview returns always the error 1104.
How to fixe this error, or maybe there is another way to store photos in a config file without passing through xml,
kind regards.

How to control picture animation

Similar Messages

Maybe you are looking for