How to control the default infotype start date when executing an action?

Dear all,
I have a custom Infotype, which start date should always before the hiring date and so we want to leave the start date blank which creating the relative Infotype.
I have already done the configuration in V_T582A such that the start date provides no default value when creating the new Infotype in PA30. However, the hiring date is still being defaulted when the Infotype when being created in an hiring action. Before I go to user exit programming, is there any place I can do relative configuration?
Thanks,
Steven

Hi Chris,
In our personnel action, IT0022 Education is included, and I've noticed that the system can provide no default start date even it is created through PA40. I have checked the dynamic action configuration that IT0022 is not included in the standard list, so I guess there may be a place to do such configuration.
Steven

Similar Messages

How to control the size of live data in Coherence?

How to control the size of live data in Coherence?
See the following statement:
Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
--Excerpted from http://coherence.oracle.com/display/COH35UG/Best+Practices

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How to get the current month starting date and ending date by default ?

Hello Creators,
This is my requirement, kindly do the needful, Please dont gimme any links i've no access for other sites, gimme the right solution.
My Requirement :
Creation Date (VBAK-ERDAT) - Select Option. By default, the program should run for the current Month ie between the starting and ending date of the current month when the program is run. Today the date is 18th using sy-datum we can bring the current date by calling it in the initialization event, but the requirement is it should not give me the current date, it should only give me the month starting date and the end date. Kindly help.
Thanks in advance ...

DATA: gv_datum LIKE vbak-erdat.
SELECT-OPTIONS: so_date FOR gv_datum.
INITIALIZATION.
CALL FUNCTION 'HR_JP_MONTH_BEGIN_END_DATE'
    EXPORTING
      iv_date             = sy-datum
    IMPORTING
      ev_month_begin_date = so_date-low
      ev_month_end_date   = so_date-high.
so_date-option = 'BT'.
APPEND so_date.
START-OF-SELECTION.
Hope this solves the issue. Don't forget to be generous
Cheers,
Sougata.

How to control the default Reverse Date at VL09

Hello,
At VL09 (reverse goods movement) screen, the default Reverse Date is today.
If users want to modify the Reverse Date,
users have to select a line, click on define date button and input date into the local date field at pop-up screen.
I want the default Reverse Date at VL09 screen to be the same as the Actual GI date of delivery.
Please tell me how.
Thank you.

1. There is no standard BADI and userexit which can fulfill your requirement.
2. You can try to do the modification in RVV50L09.
Before
"CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE'"
You can add "Move XLIKPUKWA-wadat_ist to XLIKPUKWA-STDAT. "

How to set the default Excel cell format when opening XML to XLS using an existing stylesheet?

Hi,
I have an XML file, which I'm opening with the Excel application. The stylesheet I use is horizontal.xsl.
The problem arised when the XML has data in the format "1/4" or "1/16", which is translated in the Excel as date (like "01/04/2007").
I think I have to set the default cell type to "Text" instead of "General". Does anyone know how it can be done?

Is this the same question as idoZo, if so jigg has already answered it. If not then you should post your own query not hijack someone elses giving a clear and concise question, "how to set it??" doesn't help you or other in the forum to provide you with a solution.
Is this relevant to TestStand? If it is then help by providing which version you are using and what software you are using with it. If not then post your question in the correct board.
Regards
Ray Farmer

How to know the User name and date, who executed the report last time.

Hi All,
We are collecting a list of reports which are not executed for past 3 months. Can anybody tell me how to know the username and date they executed the report last time.
Is there any table to look ? or is there any process ?
Thanks,
Ravi.

Ravi,
Use SE16 - then look at rszcompdir.
We look up Version = 13 for queries.
Regards
Gill

How to control the authority of measuring point when creating

hi,expert
I want to control the authority of the measuring point when creating the measuring point in Ik01.That is I can check the authority object of the measuring point object (equipment of function location) when I create .The sandard system can only provide the authority check of T-CODE and AuthorizGroup. On the other hand there is no customer-exit to do this .Please give me a solution .
Thank you
Edited by: Fengxi Zhao on Dec 17, 2008 8:35 AM

Dear Sir
Can you clearify the requirement in detailed? What exactly you want to prevent & You want to authorise for ??
Regards

Change infotypes end date when delete leaving action for employee

Hello,
I created new infotype and when employee leaves its end date is changed for leaving date.
When leaving action is deleted ther is some least of infotypes that user can sign so the end date of selected infotypes will be changed to 31.12.9999. How can i add my infotipe to this list?
Thank you,
Paulina

Hi,
Maintain IT 0041 where in that table maintain employee start date of hiring and leaving date of employee bze in IT 0000 the dates will change as per action lets say if employee hire that date will be in IT 0000 action and if employee gets promotion date or leaving date that will store in IT 0000 by delimiting other actions
So maintain IT 0041 where you can pull dates from there if you maintain
End date will always be 31.12.9999 so check action start date you will get in sequence
Thanks
Edited by: Vibinsap on Mar 9, 2012 7:12 AM

How to control the call to a data control using portlet parameter

hi,
i'm using a web service data control on my portlet application. I'd like to know if there's a way where in the data control will not be called when the portlet is loaded,unless the portlet parameter is specified.
thanks in advance!
Rian

thanks Yannick!
Here's what I did
1. Create a web service proxy
2. Create a java class that will manually call the web service (instantiate the service and port first?)
- Can I retrieve the portlet parameter in this class?
3. Create Data Control out of the POJO class
- Does this mean I have to code setters/getters inside Java class (for the input and output of web service) in order for me to put the fields onto my portlet?
Given your sample, am i understanding it correctly that once it's converted to a data control, you'll drag the getUserList method onto the page as parameter form?
** EDIT***
it's now working. I have a POJO that will call the service proxy and then I have a Bean that will call the POJO method. I created a Data Control out of the POJO class as well,so I can place elements in my page using drag and drop of POJO's methods/variable.
thanks a lot for your help
Rian
Edited by: rian on Dec 28, 2010 11:24 AM

How to restore the default time and date?

HI i have encountered with a problem very i have got in screen, one date field and input field TEXT Field name i have give as the <tablename-<tablefield>> like ZFIR-DATES reason giving name like this is i want to save the date in a table ZFIR when i click save. When i am clicking save date is storeing but the problem is date is not displaying defaultly.....on the screen
codeing part..
DATE(10) TYPE C.
before output screen no 100
DATE = SY-DATUM.
Thks

The format of the variable on the screen needs to be the same as the global definition - if it's a date field on the screen then you should have something like
data:
g_date like sy-datum. "naming convention g = global
and g_date on your screen as a date-type field, then in your PAI where you store ZFIR
ZFIR-DATES = g_date.
Jonathan

Af:ConvertDateTime how to control the year to start with 19xx or 20xx

Hi,
I am facing an issue. I have a af:inputDate component with af:convertDateTime with pattern MM/dd/yyyy and secondary pattern= MMddyyyy.
The issue is when the date is entered as 101147 the date gets converted to 10/11/2047 but the user wants it to be converted to 10/11/1947
Th requirement is if the two digits entered for year(yy) is less than the last two digits current year(2011) the year should be 20yy else it should be 19yy
example: if entered date is 052104 it should get converted to 05/21/2004
if entered date is 062198 it should get converted to06/21/1998
if the entered date is 07132009 it should be 07/13/2009 (no conversion here)
if the entered date is 07131986 it should be 07/13/1986 (no conversion here)
Kindly reply

This one is a tricky problem - a side-effect of JSF doing a lot of things automatically is that sometimes it does too much.
I don't have a great solution, but here's a couple of ideas:
(1) Try using multiple <h:form>s on your page (not nested one inside the other, but separate). Data will only get updated in the form that contains the button that got pressed.
(2) Use an intermediate model layer, and discard updates as appropriate.
Neither of these are beautiful solutions - the second is way ugly - but they might help. Long-range, I'd love to see something like "subforms" supported in JSF that can provide finer grained control over what gets processed (validations, model pushes, etc.) and what doesn't without resorting to the blunt hammer of multiple HTML forms.
I'm a little confused about "the model is updated with the value of the components whenever the form is submitted, and regardless of whether the value of the components has changed or not.", because JSF is checking the old value and using ".equals()" to see if its changed. Note, however, that it's not caching the old value across the request, but simply going back to the model on the subsequent request, which may (or may not) explain the behavior you're seeing.
-- Adam Winer (EG member)

How to change the default structure when exporting data in CSV format?

Hello,
can some one tell us how to change the default structure in CRM when exporting lists in CSV format (with Option "Always use unformatted list format (CSV) for download" ? Because we want to add a new structure for our own -is it possible ?
If it is possible where can we find these structure ? In the blueprint customizing ?
Thank you very much,
Christian

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to change the default date in Person assignment tab?

Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
Michelle

Hi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish

How to remove the default members of a dimension from the control table?

Hi all,
I am new to hyperion FDM 11.1.1.2.0.0 .
When I navigate to Metadata>Control Tables and try to delete the default memmbers
for the dimension like category and period i got the following error.
Error: Period( 8/31/2009 ) is an active Global or Local Period and cannot be deleted.
Then again i unchecked active checkbox for that dimension from Hyperion Essbase Integration Setup of Workbench Client.
After doing that i got the following error
Error: Unable to retrieve target System Data.
Can anyone tell me how to remove the default members of a dimension from the control table?
Thanks

Create a new record for the table.
Go change the POV to the new record.
Return to the control table and delete the default record.

How to update the default date format in OBIEE 11G.

Hi All,
How to change the default date format in OBIEE 11g from the MM/DD to DD/MM. Could anyone please help me out ASAP?
Thanks,
Arpan

Hi Arpan
OBIEE 11g is having " localedefinitions.xml " file at this Location C:\Oracle\Middleware\Oracle_BI1\bifoundation\web\display
in my case i installed at C:\Oracle\MIddleware.
so
1- Stop BI Server from EM
2- Navigate to this Location C:\Oracle\Middleware\Oracle_BI1\bifoundation\web\display. in your case oracle home will be different
3- take a backup of this file localedefinitions.xml "
4- modify it and save
5- bring BI Server up.
Regards
sher

How to control the default infotype start date when executing an action?

Similar Messages

Maybe you are looking for