How to Controll Closig operation

I have the two different application programs... I want to compine that one... so i created menubar option for my first application then i run the second application succesfully...
But i met one problem...
If I close the First application ...the Secon application not closed.... Bcos thats two r dfferent applicatin different JVM.... But I want to Control like Parent,child frame ..Parent tobe First application child tobe second application ....
What i wil do...
Adavance thanks to Experts reply....

just start the two applications in the same main
in the parent application, you will make the jframe default close operation "EXIT_ON_CLOSE" whereas in the child app, you will make it "DISPOSE_ON_CLOSE"
this way, closing the parent closes the child, but closing the child won't close the parent

Similar Messages

How to delete an operation from order using the bapi

Can somebody please tell me how to delete an operation from order using the bapi
BAPI_ALM_ORDER_MAINTAIN.
Following was the test data for the BAPI.
000000 OPERATION DELETE 0000040052810070
000000 SAVE 0000040052810070
Even I tried entering the operation table. The BAPI control ends fine, but when I check the order using IW32, the operation still exists.
So, can you please tell me where Iam going wrong.

Hi Subash Mohanvel,
Check bapireturn parameter of the bapi BAPI_ALM_ORDER_MAINTAIN after execution of the code , and if there is no error message in the return table then call bapi_Transaction_commit.
Unless you call this database saving of the records/values will not get reflected in the system.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.***

How to control DVD player menu functions in DVDSP

I have built a DVD with DVDSP and have everything working as intended except for one thing.
When I press the Home button on the DVD remote, it goes to the DVD player's menu and shows a DVD icon, then when I select the DVD icon, it shows the title list with 4 titles:
1. Warning (which has all User functions disabled)
2. Chapter 1
3. Warning (which I don't understand because there is only 1 warning track)
4. Menu
I want to set this so when selecting the DVD icon you are directed to the DVD's main menu, and it doesn't display the title list at all.
Just to give more info, the way the DVD is set up is: In the DVD remote function area, I have my title, Menu and Return buttons all routed to my main menu.
There are 4 menus (Home, About, and 2 chapter menu pages), 4 tracks (First play = .25 sec Black which end jumps to a Warning and disclaimer track which end jumps to another .25 seconds of black which jumps to main menu. These have all user functions disabled. The 4th track is the main video with 16 chapters). There are no scripts.
I have tried this with many store bought DVDs and they behave differently. Most show a DVD icon then when that icon is selected, it goes to the main menu screen. Others behave by showing each chapter as a title after selecting dvd icon.
Do you have any suggestions on how to fix this? Any help would be much appreciated.
Thank you so much in advance!
Attached are 2x diagrams, how the dvd is currently acting, and how i'd like it to.

Finally, something new here lately! (well, besides the new look)
In my 13 1/2 years working with DVD Studio Pro (starting back when it was 'simultaneously' Astarte DVDirector and Spruce Maestro) I've never seen a workflow that included the DVD player's system menu as a navigational component in the flow chart for a functional DVD.
Hi T20,
First of all, are you sure you want to know the answer to this?
The area you bring up is almost a 'blue pill / red pill' kind of thing, or choosing to turn into a 'grasshopper'..., or something like that. Definitely a rabbit hole. But if you're working for paying clients and are going into mass distribution, i.e., replication, then your question brings up a precisely the kind of multiply connected DVD specification components that are crucial to understand; especially working with an authoring system like DVD Studio Pro.
Of course, if you're good at following directions and would have the trust enough to carry out the successful experiment, then it could be a one-and-have-fun-getting-it-done operation...with full understanding of what just happened reserved for a later date.
Though, to answer your question fully here would take some doing.
Here's what I'm willing to share on this public board about the matter: The short answer would be to remove all of your warning material from the Title Domain in the VTS Spaces, i.e., eliminate the warning clip / black frame Tracks. You should have one Track in your project, according to the intent of the DVD Specifications for your project type.
Important Note: Putting a short duration warning or black frames in an entire VTS is a "best practice" promulgated for years out there that has gotten a lot of good authors in trouble in many types of players; errant navigation, player crashes, disc recalls, etc., and should not be done. In most cases, nothing should be put in a Track that you would not want the viewer to be able to Resume to; and more importantly, the DVD Studio Pro abstraction layer authoring system can not afford to have the first VTS 'wasted'. Real program content with video and however many audio and subtitle streams should reside in the first VTS for all DVD SP projects (more DVD Spec kinda stuff to go over the reasons why).
Once your project is setup optimally, then it's a matter of understanding the DVD Specification "Stopped State" and what both happens and what you want to happen afterwards; which depends on where you were when you got into the stopped state and other factors.
The below page images (unreadable, but to show there's quite a bit to it) are from the official DVD Specifications for Read Only Discs - Part III VIDEO SPECIFICATIONS. The page image on the left starts the several page section in the DVD Specifications devoted to what's allowed for navigation commands between domains - and what navigation commands and (unfortunate) circumstances cause playback to go into the "5th domain" - the stopped state. The Image on the Right starts the section in the specs for what happens and what's allowed by the remote control user operations (UOPs) between domains, including from the Stopped State.
The player will use what's allowed by spec in the UOPs to take you out of its setup menu and into the chosen target in the various domains. Though, I have found several players that pretty much do what they want in this regard, as well, but my method takes care of them, too (what player model are you using, may I ask? I have over 200 players here, and might have that guy).
The somewhat challenging part is working with DVD SP's abstraction layer auto-programming so as to anticipate this revival of playback from the Stopped State - which never occurs from the authored First Play PGC, as well as player variances with options they allow from their system menus.
So an adjusted startup First Play program routing (looks kinda 'weird' in the DVD SP project interface) would then handle a chosen Menu to play from that players system setup screen, whether the viewer chooses the "Menu" or the one remaining "Title" option. It took me 3 years to figure this out, but has been working flawlessly for hundreds of replicated titles since the fall of 2006.
Good question, t20. It takes quite a bit to get me out my 'bat cave' these days. Also, I'm about to start up my old "TFDVD.com" DVD SP support site again soon (adding Scenarist Professional support), this time under what I hope to be a true "DVD Producers Guild", and it's great to see some of this kind of 'life' still out there!
My first major article for the new site is tentatively entitled "The Most Perfect DVD Startup Action" and I will, in 'excruciating detail', cover not only the many reasons a discs startup strategy is crucial, and how to implement the DVD Specification and DVD player experience based startup principles for various types of DVD Projects, but also how to keep control of navigation during startup from the Stopped State in players. This article will have illustrated specific instructions for the DVD Studio Pro and Scenarist Professional authoring systems (Note to my good 'little monsters' from back in the day; this is not the same article from my 2001 article with a similar name).
Take care,
Trai
Trai Forrester
New Constellation Technologies / TFDVD Research Labs <--- Current entrance into the DVD 'Rabbit Hole'
DVD Verification, Proofing, Pre-mastering

HOW TO CONTROL ON CREATION OF SALES ORDER WITH REFERENCE TO EARLIER SO?

Dear All,
I want to contol on creation of Sales order with reference to earlier SO? While creation of sales order our enduser are creating sales order with reference to earlier month SO which I want to restrict. Recently I made changes in sales order like payment terms is grayed, system will atomatically pick pay terms from customer master.Now I am getting correct data also but enduser is using old SO no while creating new SO and old payment data is reflecting in fbl5n.
I want to restrict enduser while creating new SO with ref. to old SO. Only for returns they should be able to use Billing refrence. Pl. suggest how to control the with reference to ealier SO.
Nikhil

Nikhil Deshpande,
If you dont want allow create a sales order in referent to other one, just delete the copy control between these sales order type, so when the user tries to create a SO in reference to other one a message is displayed that is not possible.
Thanks,
Mariano.

CRM Web UI :- How to Control number of session of Web UI for a user

Hello Experts,
We do have very specific requirement which SAP doesn`t recommend in terms of multi-sessioning for a user.So we are little worried upon the challeges.Could you please share your ideas/Experience on following?
1.How to Control number of Internet explorer session for the web UI (may be 2 or 3).?
Though SAP doesn`t recommned more than one but our client requires 2 or more than that but we need to fix it either
2 or 3.
So we are looking for specific setting for this.
2.What are the challenges we need to face if we implement option 1?
3.Specially in interaction record management
    a. Is there chance of loosing the data if agent has opened more than two session.
    b. In which session interaction record data will get stored,the one on which agent picked up the call or in the latest
        one?
Please let me know if I am not clear enough on any point.
Thanks in advance,
Shailendra Tolambiya

Hi Shailendra,
The following wiki page might be useful in this respect:
http://wiki.sdn.sap.com/wiki/x/gxdKDQ
Best Regards,
Shiromani

How to control my MacBook Pro with my iPhone ?

I do wanna know how to control my Macbook pro just with my iPhone, please

If you mean copy files from one to the other you can connect the two via firewire cable and boot one into Target Disk Mode.

How to control follow up doc for Activities

Hi...
I have created 10 different types of Activitiy Doc. When I open any activity in crmd_order I'm getting all other activities as follow up docs(when I click on follow up icon). I dont want all of them, may be I need one or two out of those. How to control those can anyone have idea
Regards,
Ajay

Hi,
Check the copy control for transactions in
spro-->Customer Relationship Management->Transactions->Basic Settings->Copying Control for Business Transactions->Define Copying Control for Transaction Types
If the transactions are maintained as follow up for the transaction you have created then remove the entries which you dont want as follow up.
Reward points if it helps.
Shridhar

How to control DE USB disk Automounts.

Hi,
Can someone please guide me as to how to 'control' Automounts by DE when we plug USB disk drives.
I have KDE4 on my Arch system. When I connect a pen drive/USB HDD which is formatted as vfat/NTFS, the system(or KDE) 'Automounts' it in /media and I have read/write access to it. But if I use the same drive and format it as ext4, it wont be mounted as read/write for normal users but only for root.
Now pen drives and USB HDD's are removable storage drives and hence are volatile and could not have a fixed mount point, so it cannot be mounted by putting an entry in fstab or could they?. And I need my USB HDD frequently, and manually mounting it through CLI everytime and working on it as root is a bad idea i guess.
I am posting this because m confused as to how to control this Automount feature-What is the backend to it? Because I've read that HAL no longer takes care of it and that HAL will be deprecated soon, instead UDEV takes care of it. If that is the case then should I be concerned about polkit? Because that is what's the output provided by Dolphin(freedesktop.org policy prevented blah blah).
Another thing is if HAL is still in use and Automounts my devices then is it independent or polkit is a part of it. Then, is using hal-easy an option or replacement to standard HAL. ??!!??
I tried HAL archwiki and used the code to give a user permission to give rw access to automounted ext filesystems, but then nothing is mounted, it sings the same old freedesktop.org prevented bla blah song. And I think this is a question for all linuxes using Gnome and KDE in general.
Any help is appreciated.

If by 'ability to mount as user' you mean to mount it manually but read/write access to normal users then yes. But primarily I need automounting as user, also be able to give access to other users for read/write et filesystem automounts.
Last edited by kapz (2009-11-17 01:12:56)

How to control a NI USB 6210 from a Lab View program?

Hi,
I started today with Lab View with some earlier experience long ago.
While it took me only about half an hour to get my first program running (great), installation time nor included (of course), I meanwhile read documents for some hours and cannot find out how to control measurement hardware in Lab View.
I want to use a USB 6210 to set a 1-bit digital port. But at the moment there is no USB6210 available so I wanted to write (or do you say draw ?) the program without it and if possible simulate the hardware.
I drew DAQ Assistant into my block diagram and selected digital line output but get "No supported devices found". I don't know if the appropriate driver was installed during Lab View installation.
Also I don't understand the mechanism between DAQmx, tasks and the real hardware. Now I have a "Digital Bool 1Line 1Point" Control in my block diagram. How do signals get from program flow to hardware pin? How can I create a simulation for not connected hardware?
Any help is greatly welcome
Thanks a lot
Martin

Okay here is some more tutorials if you get some free time, specifically the hardware stuff will be relavent.
NI Learning Center
NI Getting Started
-Hardware Basics
-LabVEW Basics
-DAQ Application Tutorials
3 Hour LabVIEW Introduction
6 Hour LabVIEW Introduction
Self Paced training for students
Self Paced training beginner to advanced, SSP Required
LabVIEW Wiki on Training
Launch MAX, it was known as Measurement and Automation Explorer, there should be a shortcut in your start menu / desktop. Under devices and interfaces you can find your hardware and open test panels to control it. This is the first place to ensure your hardware is working. If the device isn't seen you'll need to install the drivers and DAQmx software. If it is there, great.
Now launch LabVIEW. The easiest way to control hardware is using the DAQ Assistant. It has many limitations and isn't recommended for large applications. But for something quick and dirty it works fine. You'll find it under the Measurement I/O >> NI DAQmx palette on the block diagram. If it isn't there you may need to reinstall the DAQmx drivers. This can happen if you installed DAQmx before LabVIEW.
Also you'll find under Help >> Find Examples on the toolbar, many examples on controlling hardware. Feel free to post some code if you are having problems.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

How to control the shared libs when creating an new OC4J in AS 10.1.3.4

Hi there
I experience some wired behavior in AS 10.1.3.4!
I Have 2 different installation of AS 10.,1.3.4 (Win 2003 server).
When I create an OC4J instance (using the manager) at virtual server 1 I got 28 global libraries
When I create an OC4J instance (using the manager) at virtual server 2 I got 30 global libraries, (+ apache.webservices & oracle.ifs.client )
Why this difference ?
And how to control it?
Note the default instance "Home" has 28 libraries on both servers!!
Why is it sometime possible possible to use <instance>applib for the jar, and sometime I need to create an <instance>\shared-lib\global.libraries\1.0 library ?
Regards HAns

Hi there
I experience some wired behavior in AS 10.1.3.4!
I Have 2 different installation of AS 10.,1.3.4 (Win 2003 server).
When I create an OC4J instance (using the manager) at virtual server 1 I got 28 global libraries
When I create an OC4J instance (using the manager) at virtual server 2 I got 30 global libraries, (+ apache.webservices & oracle.ifs.client )
Why this difference ?
And how to control it?
Note the default instance "Home" has 28 libraries on both servers!!
Why is it sometime possible possible to use <instance>applib for the jar, and sometime I need to create an <instance>\shared-lib\global.libraries\1.0 library ?
Regards HAns

How to Control authorization for users with certain status for level 2 WBS Element

Dear All,
Is there any standard way or enhancement available to control authorization for users with certain status for WBS Element i.e. for example
Pre-requisite:
There is only 2 level of project i.e.
Lev_ WBSE_______Description
1___ 7-14.E_______summay outage controller
2___ 7-14.E.2310__ Plant/unit # 2310
2___ 7-14.E.2310__ Plant/unit # 2220
Project Controller (authorization role assigned "Z_PS_OP7_OTGCON_C") have all project level authorization
Plant/Unit Controller (authorization role assigned "Z_PS_OP7_PLNTOTG_C_2310") have only level 2 authorization with enhancement that we did in system by Z table.
User ID_ Plant #
123345_ 2310
122455_ 2220
Issue:
After System Status released and User Status approved the WBS basic date for Plant/Units should be restricted from updating/changing by Plant/Unit Controller level and only project controller should have this authority.
Solution required:
Can any one tell how to control this scenario either by standard or enhancement available to control authorization
BR
Saqib Usman

Hi,
Did you explore SAP Enhancement CNEX0002 Using Transaction CMOD?
Thank you and regards,
Varshal Kachole
The SCN Rules of Engagement

How to control the maximum size of a component in a GridBagLayout

Here is a small program that demonstrates my issue (it's originally from a big program that I couldn't attach here).
I have a GridBagLayout with some components in it. Some of the components are JEditorPane (displaying some HTML) within JPanel and are individally scrollable.
Here we go:
- when I resize the main panel, every components will resize accordingly to their weight (which is here the same for all of them): fine
- when I reduce the size of the main panel until it reaches all the preferred size of each component, the scrollPane of the main panel appears so that the user can scroll: not fine
The behaviour I'm looking for is: when I reduce the size of the main panel, when it reaches the preferred size of the components, I would like that the JEditorPane (which are in JPanel with BorderLayout/CENTER) display their individual scrollbars so that I can see all the JEditor panes at the same time without having to scroll the main window.
If the user continues to reduce the size of the main panel, then, at one point, display the scrollpane of the main panel.
See what I mean? How to control this?
Here is the code:
@SuppressWarnings("serial")
public final class CGridBagLayout2 extends JFrame {
     JPanel mainPanel;
     private final JScrollPane scrollPane;
     private JPanel panelize(Component component, String localization) {
          JPanel output = new JPanel(new BorderLayout());
          output.add(component, localization);
          return output;
    public void addComponentsToMainPanel() {
          mainPanel.setLayout(new GridBagLayout());
          GridBagConstraints c = new GridBagConstraints();
          c.weightx = 1.0;
          c.fill = GridBagConstraints.BOTH;
          String TEST_BIGTEXT = "<html><body><h2>Path</h2>toto/tutu/tata/TestN<h2>Prerequisites</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah<h2>Description</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah blah\nblah blah blah <br/>lah blah blah <br/>lah blah blah blah blah blah blah blah FIN</body></html>";
          for (int index=0; index<10; index++) {
               c.gridheight = 5; // nb Testcases for this test
               c.anchor = GridBagConstraints.FIRST_LINE_START; // align all the components top-left aligned
               c.gridy = index;
               JLabel a = new JLabel("AAAAA");
               c.gridx = 0;
               mainPanel.add(panelize(a, BorderLayout.NORTH), c);
               JLabel b = new JLabel("BBBBB");
               c.gridx = 1;
               mainPanel.add(panelize(b, BorderLayout.NORTH), c);
               JEditorPane d = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 2;
               mainPanel.add(panelize(d, BorderLayout.CENTER), c);
               JEditorPane e = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 3;
               mainPanel.add(panelize(e, BorderLayout.CENTER), c);
               index++;
     public CGridBagLayout2() {
          super("GridBagLayout");
          mainPanel = new JPanel();
          addComponentsToMainPanel();
          scrollPane = new JScrollPane(mainPanel);
          setContentPane(scrollPane);
     public static void main(String[] args) {
          Frame frame;
          WindowListener exitListener;
          exitListener = new WindowAdapter() {
               @Override
               public void windowClosing(WindowEvent e) {
                    Window window = e.getWindow();
                    window.setVisible(false);
                    window.dispose();
                    System.exit(0);
          frame = new CGridBagLayout2();
          frame.addWindowListener(exitListener);
          frame.setPreferredSize(new Dimension(1000, 800));
          frame.pack();
          frame.setVisible(true);
}Many thanks in advance, I'm getting crazy on this one :)

Ok, thanks for this information, I thought I had seen this happening in the past when embedding a component in the center area of a JPanel with BorderLayout.
Anyway, as I said I tested with JScrollPane as well and it does not change anything.
Here is the code modified:
@SuppressWarnings("serial")
public final class CGridBagLayout2 extends JFrame {
     JPanel mainPanel;
     private final JScrollPane scrollPane;
     private JPanel panelize(Component component, String localization) {
          JPanel output = new JPanel(new BorderLayout());
          output.add(component, localization);
          return output;
    public void addComponentsToMainPanel() {
          mainPanel.setLayout(new GridBagLayout());
          GridBagConstraints c = new GridBagConstraints();
          c.weightx = 1.0;
          c.fill = GridBagConstraints.BOTH;
          String TEST_BIGTEXT = "<html><body><h2>Path</h2>toto/tutu/tata/TestN<h2>Prerequisites</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah<h2>Description</h2>blah blah blah blah<br/><b>blah blah</b> blah blah\nblah blah <u>blah</u> blahblah blah blah blah\nblah blah blah <br/>lah blah blah <br/>lah blah blah blah blah blah blah blah FIN</body></html>";
          for (int index=0; index<10; index++) {
               c.gridheight = 5; // nb Testcases for this test
               c.anchor = GridBagConstraints.FIRST_LINE_START; // align all the components top-left aligned
               c.gridy = index;
               JLabel a = new JLabel("AAAAA");
               c.gridx = 0;
               mainPanel.add(panelize(a, BorderLayout.NORTH), c);
               JLabel b = new JLabel("BBBBB");
               c.gridx = 1;
               mainPanel.add(panelize(b, BorderLayout.NORTH), c);
               JEditorPane d = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 2;
               mainPanel.add(panelize(new JScrollPane(d), BorderLayout.CENTER), c);
               JEditorPane e = new JEditorPane("text/html", TEST_BIGTEXT);
               c.gridx = 3;
               mainPanel.add(panelize(new JScrollPane(e), BorderLayout.CENTER), c);
     public CGridBagLayout2() {
          super("GridBagLayout");
          mainPanel = new JPanel();
          addComponentsToMainPanel();
          scrollPane = new JScrollPane(mainPanel);
          setContentPane(scrollPane);
     public static void main(String[] args) {
          Frame frame;
          WindowListener exitListener;
          exitListener = new WindowAdapter() {
               @Override
               public void windowClosing(WindowEvent e) {
                    Window window = e.getWindow();
                    window.setVisible(false);
                    window.dispose();
                    System.exit(0);
          frame = new CGridBagLayout2();
          frame.addWindowListener(exitListener);
          frame.setPreferredSize(new Dimension(1000, 800));
          frame.pack();
          frame.setVisible(true);
}Edited by: eric_gavaldo on Sep 15, 2010 2:18 PM

How to store logical operator in an array in java

how to store logical operator in an array in java.
Array should not be String type if i pass an element of that array it should be considered as logical operator

my exact requirment is like this, i need some logic
to convert string like this "2 Equals 3 AND 4 greater
than 7" to condition like this
2 == 3 && 4 >7 which i can pass to if
condition.So you want to create an expression parser?
No need for something as ugly as what you think you need, a simple nested conditional will do it for just the few logical operations.

How to create business operation for starting workflows

How to create business operation for starting workflows from worklist?
When I call methods that implements business operation from java class everything
works fine(wlpi-ejb.jar is required), but when I call business operation from
Studio I can't use classes from wlpi-ejb.jar.

Business operation is called by WLIS. So, I include wlpi-ejb.jar into WLIS classpath.
Studio uses deployed EJB from wlpi-*.jar, I don't know why Studio doesn't see
methods from deployed EJBs when WLIS classpath contains wlpi-ejb.jar.
"Andrew Pitonyak" <[email protected]> wrote:
>
When studio starts, what is your classpath? If you use the included batch
file to start it, then your class path may not include this :-)
Andrew
"Raul" <[email protected]> wrote in message
news:[email protected]..
How to create business operation for starting workflows from worklist?
When I call methods that implements business operation from java classeverything
works fine(wlpi-ejb.jar is required), but when I call business operationfrom
Studio I can't use classes from wlpi-ejb.jar.

How to control the data in data selection

Hi,
how to control the data .
in the transfer structure I am having 10 fields and and the file which is to be loaded contains 7 fields only.where can I control the other 3 fields and how .
thanks in advance
karna

If your source file is flat file, add extra three fields with blank (just add field separator say comma for each extra field) and then load. It should be ok.
Hope it helps..

How to Controll Closig operation

Similar Messages

Maybe you are looking for