How to convert a date column into timestamp
My sample data is:
3/7/2011 11:40:00 AM
I tried this :
TO_TIMESTAMP (completiondate, 'MM/DD/YYYY HH12:MI:SS.FF')
but iam getting error as
ORA-01858: a non-numeric character was found where a numeric was expected
can any one help me
thanks in advance
846773 wrote:
My sample data is:
3/7/2011 11:40:00 AM
I tried this :
TO_TIMESTAMP (completiondate, 'MM/DD/YYYY HH12:MI:SS.FF')
but iam getting error as
ORA-01858: a non-numeric character was found where a numeric was expected
can any one help meformat mask must match the data & yours does not match
My sample data is:
3/7/2011 11:40:00 AMpost SQL & results that proves above is true & valid
SQL> declare
2 my_ts timestamp;
3 begin
4 my_ts := sysdate;
5 end;
6 /
PL/SQL procedure successfully completedEdited by: sb92075 on Jun 20, 2011 12:10 PM
Similar Messages
-
How to convert a data set into a xml data and vice versa
i am new to oracle with xml..
my aim is to convert a data set into a xml data and vice versa..
my work is as follows...
my query:
select rggpk,rggcode,rggname from ms_regiongeo
to convert a data set into a xml*
select XMLType(trim(replace(dbms_xmlgen.getXML('select rggpk,rggcode, rggname from ms_regiongeo'),'<?xml version="1.0"?>',''))) XML_DATA from dual;
(this works fine and output of this query is as follows..)
<ROWSET>
<ROW>
<RGGPK>201</RGGPK>
<RGGCODE>Asia</RGGCODE>
<RGGNAME>Asia</RGGNAME>
</ROW>
<ROW>
<RGGPK>1</RGGPK>
<RGGCODE>OTH</RGGCODE>
<RGGNAME>Others</RGGNAME>
</ROW>
<ROW>
<RGGPK>21</RGGPK>
<RGGCODE>COB</RGGCODE>
<RGGNAME>Africa and Yemen</RGGNAME>
</ROW>
<ROW>
<RGGPK>2</RGGPK>
<RGGCODE>AUS</RGGCODE>
<RGGNAME>Australia</RGGNAME>
</ROW>
<ROW>
<RGGPK>23</RGGPK>
<RGGCODE>IND</RGGCODE>
<RGGNAME>Indian Sub Continent</RGGNAME>
</ROW>
<ROW>
<RGGPK>24</RGGPK>
<RGGCODE>TVM</RGGCODE>
<RGGNAME>North America</RGGNAME>
</ROW>
</ROWSET>
and to reverse this process, I tried a query like this..*
select EXTRACTVALUE (XML_DATA,'ROWSET/ROW/RGGPK') as EMP_ID
from(
select XMLType(trim(replace(dbms_xmlgen.getXML('select rggpk,rggcode, rggname from ms_regiongeo'),'<?xml version="1.0"?>',''))) XML_DATA from dual
)tab1but failed.. and raised with an eror: ORA-19025
help me..
regards,
johnHi-
my aim is to convert a data set into a xml data You can refer to the below posts
Adding namespace to XML output
Re: how to convert table data in xml format based on the xsd. -
How to convert a date value into week value?
How to display the date value like '20010203'
into the week number of the year 2001?
When i type in the following sql
select week(chg_time) from site;
I got this error message
ORA-00904: invalid column nameuse the to_char function, to format the date into a week number (then you might need to convert that to a number using to_number)
select to_char( sysdate, 'WW') from dual`
a description of datetime formats: http://download-west.oracle.com/otndoc/oracle9i/901_doc/server.901/a90125/sql_elements4.htm#48515 -
How to drill date (column )into month in xcelsius
Hi,
I am fresher to Xcelsius. I need to know how to drill the date column into month, then further drilling down month to day.
I have 2 columns
Date Revenue
1/1/2010 452553
2/2/2011 97992
3/5/2011 23526
4/3/2011 63563
If i click " 1/1/2011" date column, i need to see the corresponding month data in seperate chart( i need to get the detailed data).
I need to know how the datas should be arranged in excel.
Thanks in Advance
Regards,
AbiramiHi Abirami,
To filter out date, you can use calendar component in Xcelsius. This article explains how to use the calendar component in an interactive way.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b05b0244-0453-2e10-b4b3-fab707baddaf
Then with the help of an invisible combo box as explained in the article to could get just the selected month's data in bar chart.
Hope this helps.
Regards,
Anju Saseendran -
How to convert system Date into DD-MMM-YYYY Format
hi friends,
please help me How to convert system Date into DD-MMM-YYYY Format.
Regards
YogeshHI..
data: w_dt(11) type c,
w_month(2),
w_mon(3).
w_month = p_date+4(2). **p_date = given date**
case w_month.
when '01'.
w_mon = 'Jan'.
when '02'.
w_mon = 'Feb'.
when '03'.
w_mon = 'Mar'.
when '04'.
w_mon = 'Apr'.
when '05'.
w_mon = 'May'.
when '06'.
w_mon = 'Jun'.
when '07'.
w_mon = 'Jul'.
when '08'.
w_mon = 'Aug'.
when '09'.
w_mon = 'Sep'.
when '10'.
w_mon = 'Oct'.
when '11'.
w_mon = 'Nov'.
when '12'.
w_mon = 'Dec'.
endcase.
Now...
concatenate p_date6(2) '-' w_mon '-' p_date0(4) into w_dt.
write w_dt. -
How to convert julian Date into Calendar Date
Hi,
I want convert julian Date to calendar Date (mm/dd/yyyy or mm/dd/yy format) in java.
Can any one help me how to convert julian date to calendar Date.
Thanks,
Krishore.import java.util.*;
import java.text.*;
public class jdate {
Calendar date;
public jdate(int j)
date = Calendar.getInstance();
date.set(Calendar.DAY_OF_YEAR, j);
public String toString()
SimpleDateFormat formatter = new SimpleDateFormat("MM/dd/yyyy");
return (formatter.format( date.getTime() ));
public static void main(String args[])
if(args.length == 1)
int j = Integer.parseInt(args[0]);
jdate julian = new jdate(j);
System.out.println("Julian date(" + j + ") = " + julian.toString());
} -
How to convert CLOB data (now it is in html format) to Normal text format
Hi,
Can anybody let me know the solution for how to convert CLOB data into normal Text.In my case the table column having CLOB datatype and the data is in html format.when i run the report the column is displaying html tags .Now i need to convert that html tags into normal text.
Pl. let me know if any one know the solution.
Regards,
Thulasi.KLONG has been depricated since 8i so I don't believe there is a general solution to go backwards short of reloading the data.
Justin -
How to convert rows to columns in sql server 2008
How to convert rows to columns in sql server 2008 using the GROUP BY function? (only one query allowed)
Lookup the Pivot transformation. From BOL:
The Pivot transformation makes a normalized data set into a less normalized
but more compact version by pivoting the input data on a column value. For
example, a normalized Orders data set that lists customer name, product, and quantity purchased typically has multiple rows for any customer who purchased multiple products, with each row for that customer showing order
details for a different product. By pivoting the data set on the product column, the Pivot transformation can output a data set with a
single row per customer. That single row lists all the purchases by the customer, with the product names shown as column names, and the quantity shown as a value in the product column. Because not every customer purchases every product, many columns may contain
null values.
When a dataset is pivoted, input columns perform different roles in the pivoting process. A column can participate in the following ways:
The column is passed through unchanged to the output. Because many input rows
can result only in one output row, the transformation copies only the first
input value for the column.
The column acts as the key or part of the key that identifies a set of
records.
The column defines the pivot. The values in this column are associated with
columns in the pivoted dataset.
The column contains values that are placed in the columns that the pivot
creates.
Paul -
How to add one date column and charecter column
hi all,
i have 3 column start_date(date),end_date( date),duration (varchar2)
i am trying to add start_time and duration like this
end_date := to_char(start_time) + duration;
but its showing value_error
how to add one date column and charecter column.
Thanksyou need something that does:
end_date (DATE) := start_date (DATE) + <number of
days> (NUMBER)Not necessarily, because if the duration is just a string representation of a number then it will be implicitly converted to a number and not cause an error
e.g.
SQL> ed
Wrote file afiedt.buf
1 with t as (select to_date('01/07/2007','DD/MM/YYYY') as start_dt, '3' as duration_days from dual)
2 -- END OF TEST DATA
3 select start_dt + duration_days
4* from t
SQL> /
START_DT+
04-JUL-07 -
How can I separate one column into multiple column?
How can I separate one column into multiple column?
This is what I have:
BUYER_ID ATTRIBUTE_NAME ATTRIBUTE_VALUE
0001 PHONE_NUMBER 555-555-0001
0001 EMAIL [email protected]
0001 CURRENCY USD
0002 PHONE_NUMBER 555-555-0002
0002 EMAIL [email protected]
0002 CURRENCY USD
0003 PHONE_NUMBER 555-555-0003
0003 EMAIL [email protected]
0003 CURRENCY CAD
This is what I would like to have:
BUYER_ID PHONE_NUMBER EMAIL CURRENCY
0001 555-555-0001 [email protected] USD
0002 555-555-0002 [email protected] USD
0003 555-555-0003 [email protected] CAD
Any help would be greatly appreciated.This is another solution. Suppose your actual table's name is test(which has the redundant data). create a table like this:
CREATE TABLE test2 (BUYER_ID number(10),PHONE_NUMBER varchar2(50),EMAIL varchar2(50),CURRENCY varchar2(50));
then you will type this procedure:
declare
phone_number_v varchar2(50);
EMAIL_v varchar2(50);
CURRENCY_v varchar2(50);
cursor my_test is select * from test;
begin
for my_test_curs in my_test loop
select ATTRIBUTE_VALUE INTO phone_number_v from test
where person_id=my_test_curs.person_id
and attribute_name ='PHONE_NUMBER';
select ATTRIBUTE_VALUE INTO EMAIL_v from test
where person_id=my_test_curs.person_id
and attribute_name ='EMAIL';
select ATTRIBUTE_VALUE INTO CURRENCY_v from test
where person_id=my_test_curs.person_id
and attribute_name ='CURRENCY';
INSERT INTO test2
VALUES (my_test_curs.person_id,phone_number_v,EMAIL_v,CURRENCY_v);
END LOOP;
END;
Then you will create your final table like this:
create table final_table as select * from test2 where 1=2;
After that write this code:
INSERT ALL
into final_table
SELECT DISTINCT(BUYER_ID),PHONE_NUMBER,EMAIL,CURRENCY
FROM TEST2;
If you have a huge amount of data in your original table this solution may take a long time to do what you need. -
Hello.
How to convert a date field with format (dd,mm,yyyy) to format (mm,dd,yyyy)
I have text field which has a databind to a date field. When I click on it, we can select the date, it is added on the format (dd,mm,yyyy). When I want to insert this date field to a database It doesnu2019t allow me to do it because it will only accept date field on the format (mm,dd,yyyy)
I tried to store this format on a date variable and I get a message saying that is impossible to convert a string into a date.
Regards,
JoseHi Jose,
usually you format strings in c# like
string.Format("{0:yyyyMMdd}", insertyourstring);
in your case
string.Format("{0:MM/dd/yyyy}", insertyourstring);
[look here|http://idunno.org/archive/2004/14/01/122.aspx]
there are more details
if everything fails split the string with Mid()
or ask me
lg David -
How to convert trailing minus sign into the leading minus sign
Hi
Can any plz tell me How to convert trailing minus sign into the leading minus sign? I mean in PI the amount filed shows like 150.00- i want to convert that into -150.00.
Thanks
GovindaHi Shabarish,
The code works but what if the input is something like [ 10.000-] i.e. with some spaces before 10.000- and the output as per your code comes as [- 10.000]. How do we tackle such cases if there is inconsistency in data i.e. some values come as [ 10.000-] i.e. spaces before the number and some values as [12.000-].
The output of this will come as
[- 10.000]
[-12.000]
How to make it as
[-10.000]
[-12.000]
Regards,
Shaibayan -
How to convert a protected document into a PDF?
Hello,
I need to develop a plugin that needs to convert a protected document in office format into a pdf. I looked into the sdk and found the method AVConversionConvertToPDFWithHandler (). But can this method also apply the digital rigths of the protected document to the newly created pdf?
Is there any other way to convert a protected document into a pdf and at the same time apply the rights to the pdf? I don't want to use Adobe LiveCycle for digital rights management.
What are the requirements to develop a DRM plugin for acrobat?
Please Help!
Thanks in advance!The AVConversion APIs will use Office itself to perform the conversion (well, the rendering part). I would ASSUME that when Office opens the document, it will ask for any necessary passwords or other information to determine if the user has the rights to view and/or process the content of the document. If they do, then the conversion will succeed otherwise it will fail. The PDF will not have any DRM applied to it, since we don't know anything about the Office DRM options.
If you wish to apply DRM to the PDF, you will need to do that yourself or using tools such as LiveCycle Rights Management.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 29 Nov 2011 02:26:37 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How to convert a protected document into a PDF?
How to convert a protected document into a PDF?
created by poortip87<http://forums.adobe.com/people/poortip87> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4051919#4051919 -
Hi,
I have done googling for how to convert org.dom4j.Document into org.w3c.dom.Document , but could not get any usefull data.
If any one is having solution or any idea, please reply.
Thanks in advance
<!--Session data-->Note: This thread was originally posted in the [Java Programming|http://forums.sun.com/forum.jspa?forumID=31] forum, but moved to this forum for closer topic alignment.
-
How to use one report column into the another report in obiee
How to use one report column into the another report in obiee
i dont want to use column as a filter for another report it should be report column for another report
Thanks,
Vivek
Maybe you are looking for
-
How do I connect the iPad to a pc, and using my pc as a server ?
-
Very frustrated can you get a live person to help
finally decided to go the cloud direction - downloaded the "cloud app" it won't open or let me download again - turning wheel In the middle of a project - frustrated seems like you can't get a live person these days to assist and 2 hours of searchi
-
A GENERIC DATASOURCE SCENARIO -URGENT
I have few reports for BOM data is to be pull into bw all the reports contain the same tables Mentione below MAST- material to BOM LINK STKO- BOM header STPO- BOM ITEM STAS- BOM ITEM SELECTION how should i create ageneric datsource satisfying that al
-
Load data from BW 7.0 DSO into a ECC 6.0 SD standard/Custom pricing table
Gurus, We have a scenario, where we need to load data from a BW DSO to SD standard/Custom pricing table in ECC 6.0. That data will be few thousand records. Per my knowledge, in BPS, retractors are available to update data from BW to ECC and OpenHub a
-
BB10 cant block apps from internet access in Application Permissions?
I have a Q10. BB 10.1 OS. It appears I cant prevent third party apps from gaining access to the internet among other settings under the Securities/Application Permissions. This is in huge contrast to my 9700 where I can very specifically dictate what