HOW TO CONVERT RAW FILES TO JPEG RGB 8 BIT in iphoto

Can someone please tell me how to convert RAW files to jpeg RGB 8 bit in iphoto on an iMac?

How are you trying to "export to Mypics"? The only way to get a Raw out of iPhoto is to export with the Kind set to Original.
Regards
TD

Similar Messages

How to convert RAW files to JPEG?

I have a bunch of raw files and I am not sure how to convert them to JPEG. I sure would appreciate some help with this. Thank you

As you are posting on the Canon forum, I will assume you are using a Canon camera. Your camera came with the software you need. It's called Digital Photo Professional. It will also have the user manual for the software.

How do you convert Raw files into jpeg.

I have never shot in Raw before and I have a huge project due tomorrow. I need help Asap. What is the easiest way to convert Raw files into jpeg, can Light Room convert the files. I have tried so many different ways and nothing seems to work.

michaelfragale wrote:
I have never shot in Raw before and I have a huge project due tomorrow. I need help Asap. What is the easiest way to convert Raw files into jpeg
It depends on the sofware you have. ACR (Adobe Camera Raw) hosted by Bridge or by Photoshop can convert ("open") raw files, as can Lightroom.
However, not all camera models are supported by all versions of the software. We need to know the make and exact model of the camera that generated the raw files to advice you further.
We can also assist you with the conversion through ACR hosted by Photoshop.
Olease note that there are dedicated forums for Lightroom, for Adobe Camera Raw and for Bridge.
Here's the list of which cameras are supported by each version of ACR. Note that later versions supporte all camera models supported in previous versions of ACR.
http://kb2.adobe.com/cps/407/kb407111.html
Note that the latest version of ACR to run in CS4 is ACR 5.3;
CS3 runs ACR 4.6;
CS2 runs ACR 3.7;
CS runs 2.4.

How to convert raw files from new fujifilm x-t1 ?

how to convert raw files from new fujifilm x-t1 ?

The work around of converting the CR2 to dng either with the dng converter or ACR 6.7 will allow working in LR and CS5 but not with the latest raw conversion engine from Adobe i.e PV 2012.
Remember to keep a copy of the CR2 files if you wish to utilize the Canon software.

Am I able to convert RAW files to jpegs on Photoshop Elements?

Am I able to convert RAW files to jpegs on Photoshop Elements?

Hi,
Sorry, but with the information you have given, the only answer I can give is "possibly".
Each camera model produces a slightly different raw format - even different models by the same manufacturer and even if they have the same extension (file type). The latest cameras will not be supported by older versions of Photoshop Elements although there is a converter which can help.
To give you a better answer, we need to know
1) The camera make and model
2) The version of Photoshop Elements that you are using
3) The operating system that you are running on.
Brian

Lightroom wont allow me to convert RAW file to JPEG

Hi
I have tried and failed to export a RAW file to JPEG. When i highlight the RAW images to export i get a message, "source file are offline or missing". Does anyone know what this means and how can i save RAW images to JPEG?

I chose to move the images to a different file when they were exported to jpeg
Do you mean "I chose to move the images to a different file FOLDER when they BEFORE I TRIED to export to jpeg"?
If so, this is an unnecessary step in Lightroom, that actually interferes with you using the photos in Lightroom. Best to not move the files any more using your operating system, and use Lightroom tools such as keywords, captions and other metadata to help you segregate and organize your photos.
To fix this problem now, either use your operating system to move the photos back to their original location, or use this: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

Can't separate raw files from jpegs in my ipad iphoto...

i recently purchased iphoto for my ipad but i cannot separate raw files from jpegs. i can see them all in my imac and save all files properly, but then i would like to erase raw files and keep only jpegs in my ipad but cannot find how to do it! any help? thank you!

yes I am importing pairs raw+jpeg using the camera connection kit. for what I understood reading the entire discussion you suggested, the solution is, after saving the files elsewhere, to delete the photos, but ipad would erase only raw files, leaving the jpeg. but I tried with one photo, and after deleting it, the photo was gone entirely!..
also, I still cannot see both pictures (raw and jpeg) in my ipad iphoto. i can see them in my imac iphoto, but it seems the program runs differently according to the device.. that would make things so much easier for everybody!
a button 'select all' would also be appreciated I am sure!

Airdropis converting raw files to jpegs when I transfer them to my iMac at home. how do i keep the raw format across the drop?

As Above the raw files convert to jpegs and I need to keep the raw format any ideas anyone?

Converting to DNG could happen if you were dragging and dropping images from a Finder/Explorer folder into the LR thumbnails grid, which would initiate an Import operation, where you also have Copy as DNG set as your Import method. I would expect you’d see the Import panel open every time you did this, so it’d be obvious what was occurring. Dragging and dropping new images into LR this way is my standard method of Import.
One might guess conversion to DNG could occur if you drag and drop from within LR to a folder outside of LR in Finder/Explorer so an Export operation is initiated; however, on Windows, at least, this does not occur. Sometime does occur, though, because when I tried this to make sure it didn’t work, I had LR on top, then an Explorer folder beside it and my Outlook e-mail program behind the folder. When I dragged-and-dropped the thumbnail into Explorer, I got a circle-slash cursor indicating it was a prohibited operation, but then when I switched over to Outlook to write this reply, the cursor was jumping from where it was at the top of the reply to down further in the reply area, and I had to close LR to get this to stop, so LR or the OS is doing something when dragging and dropping a LR thumbnail to outside of LR. It’s possible that on a Mac different things occur.
In any case, when you move things in LR, you should be dragging and dropping thumbnails in LR to another folder in the LR folder structure, all within LR, and by default this generates a warning message box that says things cannot be undone if you do this, although there is a Don’t Show This Again checkbox. You might want to click the Reset all Warning Dialogs button in LR Preferences, so you’ll see any message boxes like this again.

I am having problems converting raw files to jpeg for printing. I am using 90 quality, 300 resolutiong, srgb, no sharpening and no resizing. when u print to meijer the pic are a little grainy. can soneone pkease helo me understand what settings to use?

When I take my cd to meijer to print the pic are a little grainy. Not as crisp as they look on the computer. When I convert raw to jpeg I am using 90 quality 300 resolution, no resizing no sharpening, srgb. Can someone please help me understand what setting to use for printing. I want to be able to out my pic ok on a cd and take them to get prints.

kann527 wrote:
I am new to this so I am not sure what the file size is since I'm not resizing it.
The question asked about exported image size (height and width) in pixels, not file size. Your operating system can tell you, or if you import the exported image into Lightroom, then Lightroom can tell you in the Metadata Panel, set the dropdown to EXIF.
I am printing a 5x7. I know I have tried to print with long edge set at 1024 and set to 300 ppi and had the same result with the grainy ness.
If the exported file has a long edge of 1024, then you did resize the image, there no other way to turn a RAW in to a JPG with long edge 1024. In any event, 1024 pixels is probably not large enough to fill 7 inches, that's really 1024/7=146 pixels per inch (rounded-off), and could be the cause of the "graininess" that you see, although I would use the word "pixelization" to describe what you see. So I'm not sure we are talking about the same thing, but let's go with it for now.
The solution depends on your answer to the original question, and probably depends on a clarification of how you got the image to 1024 on the long edge even though you claim you didn't resize it.

IPhoto converts RAW files to JPEG when exporting - why?

When I click and drag a RAW photo out of iPhoto it converts it to JPEG no matter where I send it. How do I keep it in its original RAW format so I can edit it in Photoshop? I have iPhoto 8.1.1.9(419) and OSS 10.6.2. The RAW photo file was captured using a Canon 7D.

Some more info for using Photoshop with iPhoto (applies primarily for editing jpgs and not RAW files)
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
Happy New Year

How to convert RAW files that saved in UCCX server to wav file?

Hi all,
How we can covert the RAW files that are saved in UCCX server to wav file by using command prompt in UCCX servers. Or is there some other way? So that we should be able to hear the sound of these files.
C:\Program Files\Cisco\Desktop_Audio
Regards
Ali Raza

Hi,
I use Switch File Audio Convertor from NCH Software to do this.
It is a commercial product but there is a time limited evaluation and if you decide to keep it it is only $30.
http://www.nch.com.au/switch/index.html
It is great for converting audio files to the correct format for music on hold as well.

How to convert XMP files into JPEG ones?

I need to convert 16 xmp files into jpeg or tiff ones.

XMP files are metadata files, so you are wanting to print out the text metadata associated with these 16 images? You will usually see them once a raw file (like NEF or CRW) is processed through Adobe Camera Raw. XMP files are not images.

Converting RAW files to JPEG on import?

Is this possible?
I normally shoot RAW, but I've got about 100 shots on my card which I just need JPEGs for. I was just wondering if it was possible to convert them on import rather than import as RAW then convert to JPEG...?

Instead of using Aperture's import feature, go into the Finder and navigate to the folder on your memory card containing the images. Select only the JPGs (the low-res JPGs which your camera automatically creates with each RAW file) and drag them to the project in Aperture. If you have a lot of images and selecting them one by one is a hassle, you can either create an Automator action to select the JPGs, or you can drag all the images including RAW files to Aperture, and then sort by file size to separate the JPGs from the RAWs, and then select/delete the RAW images.
Hope this helps.

Converting RAW files to JPEG

Hi there, I wonder if anyone can help. I have taken around 32 GB of RAW images on my SD card (no jpegs) - I am currently in Nepal so limited access to computer facilities. Is there a quick way to convert all these files to jpeg?

OK. You are going to need access to a computer and the CD that came with the camera. Or the internet if you don't have the CD. Excuse me if I am going too basic, but I don't know your level of experience.
The process can be very easy on your part if all you want to do is convert to JPEG; i.e. no editing.
The camera comes with software called Canon Digital Photo Professional (DPP). Install it from the CD. If you don't have the CD you can download the CD image from:
http://www.usa.canon.com/cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/eos_re...
Choose the appropriate operating system. Don't download DPP, download the EOS Solution disk.
You need to download the RAW files into a folder on your computer. Start DPP, select the folder the RAW files are in and choose "Select All"
Choose "Batch Process", select JPEG and click "Execute". Now go for a coffee; it will take the computer a long time to process 1000 images.
Since it seems like you are new this you might want to choose JPEG rather than RAW in your camera.
If this isn't clear respond back.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Raw files to JPEG not working using iphoto 8

I have a load of RAW (.CR2) files that i want to convert to jpeg to put on the net but when I select the files it doesn't work. I go through file>export and change the kind to jpeg, it then says, unable to create users/tbone/desktop/riffs (with riffs being the folder i want to put the files in.
any ideas???
I'm using iphoto 7.1

Could be a file permission issue: Download BatchMod from
http://macchampion.com/arbysoft/
And apply it to the iPhoto Library Folder using the settings found here:
http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
(Credit to Old Toad for this one).
Regards
TD

HOW TO CONVERT RAW FILES TO JPEG RGB 8 BIT in iphoto

Similar Messages

Maybe you are looking for