How to copy automation curves in between parameters

Is it possible, to copy Specific automation curves between different parameters in Lofic pro X?
I know you can copy and paste automation curves from one track to another, but I can't remember if doing it from one parameter to other is possible.
If I want the exact automation curve that I did for my volume, to be used on the same ( or another ) track, but on a tremolo, How do you do that?
Whenever I try to paste it, it pastes to the same parameter ( Volume Curve to Volume parameter, etc. )
Edit:
I found the answer on another discussion, Use Comand,
Message was edited by: Huanvixo

In project one, open the Automation Event List for the region in question, select all, goto project two, do the same but use paste instead.
Slightly awkward perhaps, but it works. It would have been easier if the automation would just follow the regions when you drag them between projects.
Edit: the Automation Event List is only available as a KC, Ctrl + Cmd + E as default.
/juhani
Message was edited by: juhani h.

Similar Messages

How to copy and paste formulas between documents in numbers 3.0?

I am unable to copy and paste formulas between 2 documents in numbers 3.0?

Hi Hans,
I can get a reference error here if the destination table does not have that range available while the source table does.
Are you sure your desination table has exactly the same structure and dimensions as your source table?
If it does, copy/paste via the Formula Editor should work. It works reliably here.
Also the formula in your latest post looks as if it might be corrupted-- lots of extra spaces (it seems). Did your orginal formula have those?
To sort this out, suggest turning off 'Use header names as labels' in Preferences.
If you end up with a formula in a cell as just Text (as Ian describes that's what happens when you copy from Numbers 2) you can convert that text to a formula by double-clicking the cell, clicking just before the text so that the insertion point appears in front of it and typing =. That activates the Formula Editor with the formula in it, which you can accept by clicking the green checkmark or hitting return.
SG

How to copy automation data between projects?

I can copy regions from one project to another, but not automation data (e.g. volume curves). Why? How to work around this?
Cheers,
Conor

In project one, open the Automation Event List for the region in question, select all, goto project two, do the same but use paste instead.
Slightly awkward perhaps, but it works. It would have been easier if the automation would just follow the regions when you drag them between projects.
Edit: the Automation Event List is only available as a KC, Ctrl + Cmd + E as default.
/juhani
Message was edited by: juhani h.

HOW TO COPY AUTOMATION

If i have 1 track of lets say drums, and I want to automate them but dont feel like going to each drum sound and automating is there a way of copying the automation to each sound?

Best way is through the Automation folder. There used to be an assignable key command to get to this... why they eliminated it, I'll NEVER understand.
There is a way in though, through the automation event list, which is accessed via an assignable key command. I'm afraid I don't remember how to get into the automation folder from the automation event list window, but it should be pretty easy to figure out. Maybe someone else can jump in here...
I have automation window set up as a screen-set.
But essentially, the automation folder looks just like the arrange page, and all your automation is represented as regions, just like audio & MIDI regions look. Simply option/drag the automation regions, to copy.
A less glamorous way, but still functional, is to set in your automation preferences, to always "Ask" when you copy or move a region.
then simply copy the first drum region (with the automation written on it), to the other tracks. Yes, you'll be placing this overtop of existing regions. You should be given a prompt at this point "Do you want to copy the automation". Say "yes". Do this to every track you want to move the automation to.
When finished moving the regions, simply select the regions that you dragged, and hit the delete key. You will get a second prompt asking you "Do you want to Delete the automation as well". Say "No".
Your original regions will still be there, but now the automation has been copied.
Hope that made sense. ...

How to copy data, table rows between tables in different schema

how do I copy rows from one table in one schema into another table in another schema in same database?

Hi,
Give an Access to the respective table in Source Schema to Destinations Schema. If table does not exits in the destination schema use CTAS else Insert into..etc., with your select Query.
- Pavan Kumar N

How to copy addresses (not email) between cards in Address Book?

I can not copy and paste postal addresses between cards in Address Book. I select the address in one card, Copy, and when I select another card the Paste option is grayed out. Copying postal addresses line by line between cards is quite tedious. Is there a better method?

While I can't offer a solution I can offer some commiseration. I have been trying to do the same thing and am stumped by both Address Books numerous deficiencies and the forums silence.

Copy automation between tracks

Hi everyone,
So sorry, this is probably very easy, but I've been checking out the manual and couldn't find it:
How to copy automation between tracks?
Thanks very much,
Nuno

Hi,
It is something of a hidden feature, mentioned somewhere in the obscure depths of the manual. p. 594, the "tip".
Open the *Automation Event list* by hitting ctrl-⌥-E. Then open another Arrange window, ⌘-1. This second arrange window will contain regions that only hold automation. Those you can copy and move around without affecting Midi or audio placement.
regards, Erik.

Non-GUI editing or import of automation curves?

I would like to generate some automation curves (for track volume) outside of garageband (from simple programs that I write myself) and somehow get them into garageband projects.
I can think of a couple of possible approaches:
- If garageband has some sort of way of editing curves as text, so that I could paste in some text generated elsewhere, then that would be fantastic... but I'm guessing it doesn't.
- If there's some other way of cutting/pasting pasting curves, even if it's not text, then maybe I could figure out how to make that work... that would take care of the "paste" part, but depending on the details it might be trickly to get my generated curves into the clipboard...
- If I could find where/how curves are represented in .band files (actually directories) then I could mess with the files directly, either using an editor (emacs, etc.) or writing my own code to parse/change/write the files. I've looked through the files within a project, and it seems like the data must be in projectData... but I can't figure out where.
Any pointers would be appreciated.
Thanks,
-Lee

Wow, I think you are asking too way much. Users often wonder if ther is a specific feature, if GarageBand can do a specific task. But what you are asking goes way beyond what GarageBand is and what it is for.
About Automation.
You only can copy Automation curves between Tracks. That's pretty much it.
I don't think there is any kind of hook into the app itself to mess with the curve on a developer base. There are only a couple of XML files hidden in the Package File that you can alter or swap out some graphic files and that's about it regarding your mods.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How do you copy automation from one track to another?

How do you copy automation from one track to another? Occassionally I mistakenly blow away a track's automation. I open up an earlier version of the song to try to get the automation. It doesn't seem that you can copy and paste the data. After some struggle, I find a way. Is there an easy way?

1. Copy the track containing the desired automation to another track. (create a track below it to keep things organized)
2. Double click on the region and delete the notes.
3. Now copy the region to the desired track.
P.S. Of course when Logic asks if you want to copy the automation data you say yes)

How do I cancel the distance between the numbers? I'm having trouble copy phone numbers from the phone book and send it via SMS This problem I've found in the Arabic language, numbers appear in reverse Please help System 6.0.1

How do I cancel the distance between the numbers?
I'm having trouble copy phone numbers from the phone book and send it via SMS
This problem I've found in the Arabic language, numbers appear in reverse
Please help
System 6.0.1

MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
Ignore the last frame and first frame indicators.

HOW TO COPY STANDARDTEXT BETWEEN CLIENTS

Hi All,
HOW TO COPY STANDARDTEXT BETWEEN CLIENTS. I WANT TO COPY BETWEEN 200 TO 110 CLIENTS.
Thanks & Regards,
suman.

Hi Suman,
Check below points.
2. goto se09 and create a new
customizing rqeuest.
3. after that
in the object list,
go in edit mode
and a new window will come
where u can add the objects(in table control)
4. there u put
program id = R3TR
object type = TEXT
object name = TEXT,YHRS_FNF_LTR,YHR1,E
where
YHRS_FNF_LTR = name of standard text
YHR1 = TEXT ID
E = english language
How To Transport STANDARD TEXTS??
Transporting standard text
Thanks
Ramakrishna

How to copy the content in XMLtype column between databases

Hi, there,
Does anyone know how to copy the content in XMLtype clumn between databases? I tried insert as select via database link and it gives me the following message:
SQL> insert into nrt_ot_request_temp (SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML )
2 select SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML from nrt_ot_request@nrtdb_acacia;
select SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML from nrt_ot_request@nrtdb_acacia
ERROR at line 2:
ORA-00942: table or view does not exist
Thanks,
Jessica

Hi Jessica,
in my eyes the second statement
select ... xmlstring_column ... from table@remote_side;
causes the error. Columns of type XMLString internally are stored as CLOBs in Oracle. Unfortunately there are restrictions on statements for CLOBs and remote locators.
It seems you cannot say
SELECT clob_column FROM table@remote_site;
Remark: For me this is a showstopper for the datatype XMLString if you cannot run a simple statement like this one. It seems you can do an insert and an update but no select.
On the other hand your first statement
INSERT INTO table_local SELECT * FROM table@remote_site;
should work following the documentation.
See also
http://docs.oracle.com/cd_a97630/appdev.920/a96591/adl04mng.htm#98328
Best regards
Indu Keilitz

Automation Curves in Logic 8?

Hello!
I am waiting on a copy of Logic and am eager to learn whether or not there are automation curves in Logic 8. Ex. Select a portion of timeline, automate a parameter from xx to xx with an s shaped curve, parabolic, etc.
If anyone would like to post a quick answer it would be very much appreciated!

How it works in Logic is that you create the start and end points first and then apply the type of curve. However, both parabolic and s-curves are easily available and, in fact, use the same tool. It's just how you flick your wrist, so to speak...
Pete

Need a fluctuating automation curve

I need an automation curve for one of my tracks that STARTS with the low-mids and slowly ENDS with high treble. How can I get this effect?
Currently I'm doing it manually in the Visual EQ to see how it sounds, but I don't know how to record what I'm doing (i.e. dragging the point in the Visual EQ from the low-mid to high treble).

rsherid wrote:
I can only pick one Visual EQ effect from the list when I actually want one that fluctuates between EQs.
you can automate any parameter an effect offers:
every box you check gets a curve of its own to raise or lower at any point in time
( EDITED to remove a mistaken memory about Visual EQ {Hey, I'm trying to get ready to go out for the evening, cut me some slack, eh? B-)> })

How to share one Itunes account between computers

I'm trying to figure out how to actually move music in Itunes from one computer to another. I have the same account set up on both my desktop and laptop and I can access music from one on the other when they are both signed into Itunes. However, I would like to move some music from the desktop onto my laptop. Can I do this without hooking them up together (i.e. firewire cable, or whatever you would normally use)? Thanks!

iTunes: How to copy purchases between authorized computers
Though it refers to items purchased from the iTunes Store, it applies to all your tracks and videos. And if you happen to also own an iPod:
How to use your iPod to move your music to a new computer
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

How to copy automation curves in between parameters

Similar Messages

Maybe you are looking for