How to copy data, table rows between tables in different schema

how do I copy rows from one table in one schema into another table in another schema in same database?

Hi,
Give an Access to the respective table in Source Schema to Destinations Schema. If table does not exits in the destination schema use CTAS else Insert into..etc., with your select Query.
- Pavan Kumar N

Similar Messages

How to copy data from one internal table to another

i am using some function module to get some data for my function module
and the retrieved data is not getting populated in mu fumctional module
i am sucessful in getting the data to an internal table in my function module but dont know how to pass it to my table parameter
thanks in advance

Hi Naval,
Declare an internal table of type table parameter structure and pass it the table parameters of the Function module.
Check the code for this function module.
DATA IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
SELECT * FROM MARA UP TO 10 ROWS INTO TABLE IT_MARA.
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 FILENAME = 'C:\TEST.TXT'. FILETYPE = 'ASC'
 WRITE_FIELD_SEPARATOR = 'X'
 TABLES
 DATA_TAB = IT_MARA
 EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Vinay

How to copy data from transparent table to our own ceated z table?

How to copy data from transparent table to our own ceated z table?
Plz tell me different methods and which one is best?
Is get data from sflight into table z* is correct?

Hi Ajay,
let us consider you have to copy EKKO table to ZEKKO table
1. In ABAP program define internal table based on EKKO
 eg: i_ekko
2. Select the data from EKKO to i_ekko
 eg: select * from ekko into table i_ekko.
3. insert into Z-TABLE from the internal table
 eg: INSERT EKKO FROM TABLE I_EKKO.
 COMMIT WORK.
To insert in internal table you can use the following:
1. INSERT [wa INTO|INITIAL LINE INTO] itab [INDEX idx].
2. INSERT [wa INTO|INITIAL LINE INTO] TABLE itab.
3. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO itab2 [INDEX idx3].
4. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO TABLE itab2.
To inert in database table, use the following:
1. INSERT INTO <dbtabname> [CLIENT SPECIFIED] VALUES wa.
2. INSERT <dbtabname> [CLIENT SPECIFIED] FROM TABLE itab.
3. INSERT <dbtab> [CLIENT SPECIFIED]. oder
4. INSERT <dbtabname> [CLIENT SPECIFIED] ... .
Reward points.. if helpful.
Cheers !
Moqeeth.

How to move data from a staging table to three entity tables #2

Environment: SQL Server 2008 R2
I have a few questions:
How would I prevent duplicate records, when/ IF SSIS is executed many times?
How would I know that all huge volume of data being loaded in the entity tables?
In reference to "how to move data from a staging table to three entity tables ", since I am loading large volume of data, while using lookup transformation:
which of the merge components is best suited.
How to configure merge component correctly. (screen shot is preferred)
Please refer to the following link
http://social.msdn.microsoft.com/Forums/en-US/5f2128c8-3ddd-4455-9076-05fa1902a62a/how-to-move-data-from-a-staging-table-to-three-entity-tables?forum=sqlintegrationservices

You can use RowCount transformation in the path where you want to capture record details. Then inside rowcount transformation pass a integer variable to get count value inside
the event handler can be configured as below
Inside Execute SQL task add INSERT statement to add rowcount to your audit table
Can you also show me how to Check against destination table using key columns inside a lookup task and insert only non
matched records (No Match output)
This is explained clearly in below link which Arthur posted
http://www.sqlis.com/sqlis/post/Get-all-from-Table-A-that-isnt-in-Table-B.aspx
For large data I would prefer doing this in T-SQL. So what you could do is dump data to staging table and then apply
T-SQL MERGE between tables (or even a combination of INSERT/UPDATE statements)
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to copy the table1selected records into table 2 in webdynpro java.

Hi
how to copy the table1selected records into table 2 in webdynpro java.
venkat
Edited by: venkatpvr on Sep 23, 2011 11:53 AM

Hi Venkat,
You have 2 Value Nodes one for Table1 and second for Table2.
Table1 node having one more Value Attribute i.e check Box data type is Boolean. Now you are requirement are select records from Table1 Node and click on One Method that records will moves to Second Table2 Node.
Create One Method for getting the Records from 1-Table to 2-Table
CopytoTable2 ()
In this method you have to write code like this
If (wdContext.nodeTable1.Checkbox(true))
If(1. Check the Table1 Value Node Size()>0)
Get the Table1 records and set to table2 Value node.
Else
Please select check box// Error message
Hope this helps!!
Regards
Vijay K

How to Fix the 1st row in Table

How to Fix the 1st row in Table
In EP, one of the page we are getting out put in the table format. It's working fine, but as per the new requirement we have to fix (freeze) the first row of the table. (.i.e. whenever I click the page down button first row should be visible in the table). Can you help regarding the above issue?
For Example: in Table having 6 rows. In 1st row display Year Month and 2,3,4---etc Rows will display Quantity. Click on Page down Button in Table we are able to staring 2row. First was a movie up. So End user canu2019t find which year/moth under the Quantity is available.
So I have to fix in 1st row. Click on page down button table 1st row is fixed but comes to another Quantity Records.
It is Possible in Table? If possible please tell me.
Regards
Vijay Kalluri

Hi KalluriVijay
I don't think there is direct availabe method available to fix the row. However, there are two ways using which you can achieve the requirement:
To go ahead with the custom table. This way you can set your own properties for the table. However, this may impact performance handling large data.
Second option is to use other features of NW04s (Not available in NW04) like Table Popins using which you can achieve something similar.
For Table Popins refer [TablePopin|http://help.sap.com/saphelp_nw70/helpdata/EN/23/5e9041d3c72e7be10000000a1550b0/frameset.htm]
Hope this helps.
Regards
Abhinav Sharma

How to insert data into the mysql table by giving as a text file

Hi,
Any one know's how to insert data into the mysql table by giving as a text file as the input in JSP.Please respond ASAP.
Thanks:)

At least you can try StringTokenizer to parse your text files. Or download a text JDBC driver to parse your files, for instance, HXTT Text(www.hxtt.net) or StelsCSV(www.csv-jdbc.com).

How to export data from a Oracle table to a delimited file?

I know how to load delimited file into a table, but how to export
data from a Oracle table to a delimited file?
Thanks in advance.

Try looking at this link, it's long but there's three different solutions discussed in it. If you look at Barbara Boehmer's
solution in her posts in the link below you'll see that she's addressed your concerns with spool files.
Re: utl_smtp and triggers

How to read data from an internal table into a real table?

Hello experts,
I'm relatively new to ABAP and I'm trying to figure out how to read data from an internal table into a table that I created. I'm trying to use the RRW3_GET_QUERY_VIEW_DATA function module to read data from a multiprovider. I'm trying to read data from the e_cell_data and e_axis_data tables into a table that I've already created. Please see code below.
TABLES MULTITAB.
DATA:
query_name TYPE RSZCOMPID,
s_cubename TYPE RSINFOPROV,
t_cell_data TYPE RRWS_T_CELL,
t_axis_data TYPE RRWS_THX_AXIS_DATA,
t_axis_info TYPE RRWS_THX_AXIS_INFO,
wa_t_cell_data like line of t_cell_data,
wa_t_axis_data like line of t_axis_data,
w_corp_tab like line of t_cell_data.
s_cubename = 'CORP_MPO1'.
query_name = 'Z_corp_test'.
 CALL FUNCTION 'RRW3_GET_QUERY_VIEW_DATA'
 EXPORTING
 i_infoprovider = s_cubename
 i_query = query_name
 i_t_parameter = query_string_tab
 IMPORTING
 e_cell_data = t_cell_data
 e_axis_data = t_axis_data
 e_axis_info = t_axis_info.
If anyone has any information to help me, I would greatly appreciate it. Thanks.

Hi,
<li>Once you call the function module RRW3_GET_QUERY_VIEW_DATA, lets say data is available in the corresponding tables e_cell_data e_axis_data which you have mentioned.
<li>Modify your internal table defined for other purpose, with data from e_cell_data e_axis_data like below.
LOOP AT t_cell_data INTO wa_t_cell_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_cell_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
LOOP AT t_axis_data INTO wa_t_axis_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_axis_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
Thanks
Venkat.O

How to move data from 2 internal table to 1 internal table

Can any body send me code that how to move data from 2 internal table into one internal table.
Moderator message : Read ABAP documentation. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 11:45 AM

Hi Mohdarif92;
I don't know your full needs. But general method should be as below code.
Please check exam below code.
Best regards.
data : begin of gt_result.
            ... like mkpf-...
            ... like mkpf-...
            ... like mseg-...
            ... like mseg-...
          end of gt_result
select *
into table gt_mkpf
from mkpf where ...
select *
into table mseg
from mseg where ...
loop at gt_mkpf.
     loop at gt_mseg where ... = mkpf-...
        move-corresponding gt_mkpf to gt_result.
        move-corresponding gt_mseg to gt_result.
        append gt_result
     endloop.
endloop.

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

How to count number of rows in table

can I get number of row in table except Count(*) in pl/sql
is there any other way

Also posted and answered here
how to count number of rows in table
count(*) will be the fastest way. It is only slow if the table has a vast number of rows, in which case why do you need to know the tables has 73552436467721 rows and not 73552436467737 rows. It doesn't seem to be much use. Either that or you are counting them a lot, which again seems rather pointless.

How is the data inserted into CST_INV_QTY_TEMP table?

Hi All,
How is the data inserted into CST_INV_QTY_TEMP table ?
Thanks in advance,
Mayur
Edited by: 928178 on 17-Apr-2012 04:29

How is the data inserted into CST_INV_QTY_TEMP table ?TABLE: BOM.CST_INV_QTY_TEMP
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=CST_INV_QTY_TEMP&c_owner=BOM&c_type=TABLE
Thanks,
Hussein

Applying table scroll bar for only table rows with table columns fixed.

hi oa gurus,
i had implemented table scroll bars using oarawtextbean , there is no problem in vertical and horizontal scroll bar working its working fine. but the requirement is i need to scroll only the table rows with table columns fixed. so , how to achieve the table scroll for only table datas neglecting table headers.
the code for vertical and horizontal bars scroll is like this,
OARawTextBean ors = (OARawTextBean)webBean.findChildRecursive("raw1");
ors.setText(div id=tabledivid style=height:500px;width:100%; overflow:auto>);
OARawTextBean ore = (OARawTextBean)webBean.findChildRecursive("raw2");
ore.setText("</div>");
where raw1 and raw2 are rawtextbean created above and below of the table . but i dont know hoow to apply this only for table rows neglecting table columns , can anybody give any ideas.
pelase this is very urgent , can u help me in this regards
thanks
Edited by: user630121 on Sep 29, 2008 5:17 AM
Edited by: user630121 on Sep 29, 2008 5:18 AM

hi,
I have a similar task to do... Only to apply scrollbar at the table level.
I tried using the above mentioned but I am facing Null Pointer Exception..
Please explain about raw1 and raw2
Rahul

How to copy data from one column to other column

hi,
can any one tell me how to copy data of one column to other column for some specific data
example
productno ocalyear        actualsales prevplansales   currentplansales
p001       2007                  100              120
p002       2007                   90               100
p003       2007                  120              130
p004       2007                  140              120
p005       2007                  150              150
i want to copy data of p001 and p002 from prevplansales to current plansales
productno ocalyear        actualsales prevplansales   currentplansales
p001       2007                  100              120              120
p002       2007                   90               100              100
p003       2007                  120              130
p004       2007                  140              120
p005       2007                  150              150
is it possible to do?
please suggest me.
i will assign points

Hi,
I think the needed techniques are already described in the documentation, e.g. in
http://help.sap.com/saphelp_nw70/helpdata/en/45/e641e4c61256dee10000000a114a6b/frameset.htm
or
http://help.sap.com/saphelp_nw70/helpdata/en/45/e641e4c61256dee10000000a114a6b/frameset.htm
The main techiques used in the above example to bind the filter of the planning function to selected (marked) objects in the analysis item or to drop down boxes (or both). These techniques are used in the above examples.
Regards,
Gregor

How to copy data, table rows between tables in different schema

Similar Messages

Maybe you are looking for