How to copy only an alias, not source file in ARD?

I'm trying to copy an alias from my computer to all the imacs in my lab with ARD 3...but instead of the alias, the folder the alias points to is being copied. How can I only copy the alias. My apologies if the question has been asked recently.
Cheers
Colin
Message was edited by: Host <to clarify Subject>

The command below would create a symbolic link (alias) on the current user's desktop called 'Apps' that points to Applications. Note: You would run this command with the radio button clicked that says "run as current logged in user".
ln -s /Applications ~/Desktop/Apps
You can open up terminal and type in man ln to see the other options and how the command works.

Similar Messages

How to copy only part of a binary file after selecting a start and stop byte?

I need to copy a selectable block of binary data from one file to a new file. The binary file is made up of several data widths (8/16/32 signed and unsigned). If I use a read binary function I will need to account for the data types within the file. I was hoping to do a copy function with a start and stop byte control. Any pointers?

The attached Rube Goldberg Code copies two arrays of clusters to two arrays of indicators.
Ben
BTW: It does so by writtng the flattened data to a fixed length file and decoding same on the read.
Message Edited by Ben on 03-24-2007 12:54 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
File Decode.JPG ‏137 KB
FileDecode.vi ‏125 KB

How to copy only some coulums and rows from excel files to a Oracle Table

Dear all,
I have the following problems:
How to copy only some wanted coulums ( I.e DATETIME(format:17/09/2007 00:00:01 ) and TIME (format: 00:00:01 ) from excel files to oracle table.
HOPE TO GET HELP FROM YOU GUYS!
SINCERELY,
MONOJSHARMALUITEL

How about Heterogeneous Services so that the Excel sheet is an external database:
1- Go to Control Panel>Administrative Tools>Data Sources (ODBC)>System DSN and create a data source with appropriate driver. Name it EXCL.
2- In %ORACLE_HOME%\Network\Admin\Tnsnames.ora fie add entry:
EXCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.0.24)(PORT = 1521))
(CONNECT_DATA =
(SID = EXCL)
(HS = OK)
Here SID is the name of data source that you have just created.
3- In %ORACLE_HOME%\Network\Admin\Listener.ora file add:
(SID_DESC =
(PROGRAM = hsodbc)
(SID_NAME = <hs_sid>)
(ORACLE_HOME = <oracle home>)
under SID_LIST_LISTENER like:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\ORA9DB)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORA9DB)
(ORACLE_HOME = d:\ORA9DB)
(SID_NAME = ORA9DB)
(SID_DESC =
(PROGRAM = hsodbc)
(SID_NAME = EXCL)
(ORACLE_HOME = D:\ora9db)
Dont forget to reload the listener
c:\> lsnrctl reload
4- In %ORACLE_HOME%\hs\admin create init<HS_SID>.ora. For our sid EXCL we create file initexcl.ora.
In this file set following two parameters:
HS_FDS_CONNECT_INFO = excl
HS_FDS_TRACE_LEVEL = 0
5- Now connect to Oracle database and create database link with following command:
SQL> CREATE DATABASE LINK excl
2 USING 'excl'
3 /
Database link created.
Now you can perform query against this database like you would for any remote database.
SQL> SELECT table_name FROM all_tables@excl;
TABLE_NAME
DEPT
EMP

I have a pdf file, how do it ONLY View but not can get changed, I mean locked

I have a pdf file, how do it ONLY View but not can get changed, I mean locked?

Use the Security tab in the properties of the document.

Anyone know how to select only even or odd numbered files in lightroom?

Anyone know how to select only even or odd numbered files in lightroom? I need to reduce the quantity of images in my timelapse sequence and this would help me greatly since there are 8250 images and doing this maually would be tediuos and make me want to kill myself.... : )

Do this.
If they are jpegs, use .jpg instead of CR2
Be sure to save this as a preset, as you WILL need it again. Mine is named "select even CR2", that is why it says that in the upper right.

How to view of damaged lotus notes nsf file?

After the restoration of utilities through almost all the bases when opening throw an error "File is not database", "File
does not exist" or "Database is corrupt - Can not allocate space".
How to view of damaged lotus notes nsf file?

Hello Rzher,
The forum is for MS Office related questions. I'd recommend asking Lotus Notes related questions on the
IBM forums instead.

How to copy tables between diff data source ?

if copy tables in same datasource, the problem is easy , just
CREATE TABLE DESTDB.TABLE as select * from SOURCEDB.TABLE
but in diff data source, such as copy access table to a non-exsit oracle table,
need to create the target table first . my problem is how to create the target table by source table structure. though the source table structure can be read out, but parse it and make the SQL statement to create the table is a tough job.
anyone have good idea ??
thanks.

You are explaining a huge topic in simple terms.
You are trying to do Database Migration from MS-Access to Oracle. It's not all that easy. But if you are restricting to creating few tables then, do a small exercise.
1. Use ResultSetMetaData to get the no of coluns and their data types.
2. Construct a create statement by using above information.
3. Then query the table1 for all the records and insert those records into created table.
Sudha

How to copy a folder from TFS source control to Shared location with Powershell script

Hi,
I'm looking for a Powershell script where i could copy a folder from TFS Source control to a shared location.
Details:
$TeamProject/FolderA - here i want to move FolderA to a shared location called \\Share
Tried with xcopy: xcopy "$TeamProject/FolderA" "\\Share" ( but no luck, later i found it's only possible to copy files from local to share or share to share location, not from server path to shared location.
Can someone help me with the power-shell script to achieve above scenario.
Thanks, BHSR

Hope the below script works for your scenario. Got the code from http://stackoverflow.com/questions/23739499/copy-files-from-tfs-versioncontrol-to-directory-with-powershell
$AutoDeployDir = "$\TeamProject/FolderA"
$deployDirectory = "\\SERVER\SHAREFOLDER\"
# Add TFS 2013 dlls so we can download some files
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.TeamFoundation.Client")
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.TeamFoundation.VersionControl.Client")
$tfsCollectionUrl = "http://CDTFSSERVER:8080/tfs/ProjectCollection"
$tfsCollection = New-Object -TypeName Microsoft.TeamFoundation.Client.TfsTeamProjectCollection -ArgumentList $tfsCollectionUrl
$tfsVersionControl = $tfsCollection.GetService([Microsoft.TeamFoundation.VersionControl.Client.VersionControlServer])
# Register PowerShell commands
Add-PSSnapin Microsoft.TeamFoundation.PowerShell
# Get all directories and files in the AutoDeploy directory
$items = Get-TfsChildItem $AutoDeployDir -Recurse -Server $tfsCollection
# Download each item to a specific destination
foreach ($item in $items) {
# Serverpath of the item
Write-Host "TFS item to download:" $($item.ServerItem) -ForegroundColor Blue
$destinationPath = $item.ServerItem.Replace($AutoDeployDir, $deployDirectory)
Write-Host "Download to" $([IO.Path]::GetFullPath($destinationPath)) -ForegroundColor Blue
if ($item.ItemType -eq "Folder") {
New-Item $([IO.Path]::GetFullPath($destinationPath)) -ItemType Directory -Force
else {
# Download the file (not folder) to destination directory
$tfsVersionControl.DownloadFile($item.ServerItem, $([IO.Path]::GetFullPath($destinationPath)))
Regards, Bharath
LinkedIn:

How can multiple users work on one source file?

Hi There,
I'm currently working on a project that I would like to hand-off to another person to finish. I've tried sending the source file located in at: Home>Movie>iMovie Projects but apparently that doesn't work as the second user is unable to work on the project.
Is this achievable? If so, how?
Thank you in advance for any help! It's greatly appreciated =)

For iMovie 09, you:
You have to plug in an external drive, and within iMovie, drag the project file to the external drive. It will ask you if you want to "copy project" or "copy project and events".
If you want to move the project and not just make a copy, then hold down the Command key while you drag the project file to the external drive.
iMovie 08 does not have the capability of having project files on the external drive, but you can try to manually copy it to the external drive with the finder, and then move the associated events +from within iMovie+ (critical for the other machine to find the files) and when copying the project file to the other computer, it would be critical to find the iMovie project folder in the Movies folder and put it in exactly the same place on the other machine. Otherwise iMovie won't find it.
The way you want to use it, iLife09 might be worth the upgrade, especially if my suggestions don't work.

How to go for Advance selction for source file in J2SE adapter

Hi all,
I am doing a file to file scenario using J2SE adapter.I have to pick file from two different directory we can easily achieve it in J2EE adapter using advance selection of source file but how to proceed in case of J2SE plain adapter.Please guide me with your knowledge.
Regards,
saurabh

This is not possible. You need different adapters, but you can use the same interface and namespace, so there should be no issue.
Regards
Stefan

How to print only fatal error in log file in tomcat4.1

Hi all ,i m using tomcat4.1
1> i want to print only fatal error in log file ,but it print all thing in log file ,how i can avoid it(because i think this process is consuming my resource)
assume below ip address is corect:
this is exact printing in my log file
.12.2.3.3 - - [24/Oct/2007:00:00:00 5050] "GET /menu/ir.jsp HTTP/1.1" 200 2828
12.2.3.3 - - [24/Oct/2007:00:00:00 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
12.2.3.3 - - [24/Oct/2007:00:00:02 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
12.2.3.3 - - [24/Oct/2007:00:00:02 5050] "GET /alerts/createAlertShow.jsp HTTP/1.1" 200 26140
123.2.3. - - [24/Oct/2007:00:00:05 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 642
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/latestRecommendation.jsp HTTP/1.1" 200 5210
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /portfolio/watchlist/displayWatchlistItemsShow.jsp?watchlistId=20070509013642953_1&watchlistName=First&refreshRate=900&flag=1 HTTP/1.1" 500 7257
12.2.3.3 - - [24/Oct/2007:00:00:05 5050] "GET /menu/iwealthNewsScroller.jsp HTTP/1.1" 200 2828
112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/alerts.jsp HTTP/1.1" 200 323
112.23.3 - - [24/Oct/2007:00:00:06 5050] "GET /menu/bottomAdv.jsp HTTP/1.1" 200 528
12.2.3.3 - - [24/Oct/2007:00:00:07 5050] "GET /menu/alerts.jsp HTTP/1.0" 200 323
12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "POST /Transaction/equity/modifyConfirmShow.jsp?DelId=0 HTTP/1.1" 200 28661
12.2.3.3 - - [24/Oct/2007:00:00:09 5050] "GET /menu/getsensex.jsp HTTP/1.1" 200 6422>what will happen if i change timestamp="false" and what is the significance of verbosity="1" or "2" or "3" ,or "4" and what happen if i change debug="1" or other in below code
<Logger className="org.apache.catalina.logger.FileLogger" debug="0" directory="logs" prefix="www.xyz_log." suffix=".txt" timestamp="true" verbosity="4"/>Edited by: Deepak23 on Oct 24, 2007 10:41 PM
Edited by: Deepak23 on Oct 24, 2007 11:16 PM

One of my standard answers (which will explain the use of Directory Objects)...
The UTL_FILE_DIR parameter has been deprecated by oracle in favour of direcory objects because of it's security problems.
The correct thing to do is to create a directory object e.g.:
CREATE OR REPLACE DIRECTORY mydir AS 'c:\myfiles';Note: This does not create the directory on the file system. You have to do that yourself and ensure that oracle has permission to read/write to that file system directory.
Then, grant permission to the users who require access e.g....
GRANT READ,WRITE ON DIRECTORY mydir TO myuser;Then use that directory object inside your FOPEN statement e.g.
fh := UTL_FILE.FOPEN('MYDIR', 'myfile.txt', 'r');Note: You MUST specify the directory object name in quotes and in UPPER case for this to work as it is a string that is referring to a database object name which will have been stored in uppercase by default.

Bulk selecting and Copying only the raws to a file

HOw do you copy only the raws or only the jpgs to a file without clicking on them one at a time

The easiest way to do this is to open the folder in windows and search for all file in jpg by putting .jpg in the windows search box. Windows will produce a list of all jpg files in the folder. Select ctr button and the a button on your keyboard and all the files will be selected. Then copy and paste to whereever you want the file to be.
You can do the same for raw by putting the raw extension in the search box. (different camera brands have differnt extension for their raw files)

How to exclude src.zip with java source files from archive

Hello All.
Our team have to prepare our SCs (Sowtware Components) for using outside the company. Meanwhile our source files should be protected. We tried a lot of ways to remove all sources from SCA archives.
This SC should then be integrated in third-party product.
Using build options in compartments gives no effect.
Any ideas?
Thanks in advance.
Maxim Maltsev.

Thanks a lot.
To make code invisible for customer we should build an assembly with build option "include_sources"=false.
DCs in such assemblies won't be visible in inactive branch and could be used as non-editable in active branch of track.
The task is settled - client can modify his own code and use our code only via used DC and their public parts, he is not able to see our code.
Also customer can not see private sources as he gets assemblies without sources. Remember - public parts of type assembly shouldn't be of Source type.
Maxim Maltsev.
Edited by: Maxim Maltsev on Dec 10, 2009 3:53 PM

How can I put more than one source file when I am creating my installer from LV 7 Express

Hi,
I am creating my installer for my application and I would want to add more than one source file at once, how could I do it?
Thanks,
ToNi.

Hi,
I'm referring to the first executable. In other words, I have my application and I want to build and executable of it. Then I go to "Tools->Build application..." and then in the source files tab I can add my vi files but I want to add more than vi at the same time (at once) and not one by one. How can I do it?
And my second question is: When I make the installer for my application I save the configuration in a build Script file (.bld) in order to use it whenever I want. Then If from another computer different from the one where I generate the .bld file, I load it, LV tells me that something is wrong (LV says there are some errors in some VIs but It doesn't tell me what files are). Why?
Thanks in advance,
ToNi.

How can I delete an alias of a file that has been deleted already?

A couple of days ago I took a screen shot of my flight's itinerary for this summer vacations. Without noticing I created an alias of the file...I deleted the screen shot and now I just have the alias and i can not delete it nor dragg it anywhere .... it gives me the option to delete it or fix it but nothing of that works ... I tried to hold command and dragg it but it wont go anywhere and i also tried dragging it to the terminal but it wouldn't go there either...the file just won't go anywhere!!
Help please!

1. Consider using a Database.
If this option is bit "too heavy"
1. Using a BufferedReader read the whole line.
2. Use StringTokenizer to split into tokens .
You would get name and age.
3. If thereare more attributes of person consider creating an Object to represent this person.
class Person{
private String name;
private int age;
Person( String name , int age ){
public int getAge(){
return this.age ;
}4. Put these entries in Hashtable using name as key
HashTable h = new HashTable();
// ... somewhere later in code
Person p = new Person( name , age );
h.put( p.getName() , p ) ;
// Somewhere later
String name = "xyz" ; // or read from somewhere
((Person)h.get(name)).getAge();

How to copy only an alias, not source file in ARD?

Similar Messages

Maybe you are looking for