How to copy whole code of transaction FV60 and assign ZFV60

Hi,
I' am required to copy the whole programms of transaction FV60 into Z-programms and assign ZFV60 transaction for the copied programms. Can anyone explain how to acheive it.
Thanks in Advance.
Rajesh.

Hi
You can copy the program SAPMF05A related to the Tcode FV60
But this program is a Module POOL and consists of some 112 screens related to this program.
First find the related screens that are required to you and download them to desktop and reload them to Z program screens with carefully
Reward points for useful Answers
Regards
Anji

Similar Messages

How to make comnapy code defalut got 100 and 1001 in the PNP screen

Hi Expart ,
can u tell me my que how to make comnapy code defalut got 100 and 1001 in the PNP screen in HR reporting?
Regards
Razz

Use the below code in the INITIALIZATION
INITIALIZATION *
initialization .
" Make Default values for Company Code 2100 & 2200
PNPBUKRS-LOW = '2100'.
PNPBUKRS-HIGH = '2200'.
append PNPBUKRS.
regards
.....lakhan

How to copy source code without line numbers?

Dear all,
how can I easily copy source code from a post or thread. When I do it via the mark the text and CTRL-C I always have the line numbers also in the clipboard. It is anoying to remove 100+ line number to use the posted code from a thread in my IDE.
Thank you, Time

Do you mean how to copy text out of a forum post without the line numbers?
If that is the case, then unlike the previous response I do think it is a forum issue and a browser incompatibilty. I noticed the same issue between Firefox and Safari under Mac OSX. While Firefox allows me to just select the text without the line numbers, Safari would not.
Test:
line 1
line 2
In fact, using Firefox verson 22 for instance, I cannot select the line numbers at all. Even when I select the whole page, line numbers are ignored.
Perhaps you should try with another browser.

How to print bar codes in sap script and smartform

bar code sheet to print for particular customer when the
transfer order is created.

Hi,
You create a bar code or change a bar code in the font maintenance transaction (transaction SE73). To do this, proceed as follows:
○ Start transaction SE73, and choose System Bar Codes ® Change.
○ If you create a bar code, the system asks whether you want to use the new bar code technology or traditional system bar codes. Choose New.
You can enter a name and a description for the bar code. Note that the name must begin with a Zto avoid conflict between your bar codes and the standard bar codes.
2. If you have created a new bar code, you must now add this to a Smart Style as a character format. For information about this, see the section Maintenance of Styles with the Style Builder and its subsections in the Smart Forms documentation.
If you have only changed the bar code, continue with the next step.
3. You can now select text in Smart Forms and choose the corresponding style with the bar code as the character format for this text.
4. You can then print the bar code.
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10581664&messageID=3321556
Check the pdf below..
http://www.sap-press.com/downloads/h955_preview.pdf
Regards
Kiran

How to copy a dir structure with files and subdir's in to another dir

Hi there.
How can i copy a dir structure with files and subdirs to another dir structure
ie., all files and dirs in side the dir c:\aDir to c:\copyDir so i should get like c:\copyDir\aDir(all the files and subdirs of adir here)
Thanks in advance
Muthu

File f = new File(dirName);
if(f1.isDirectory()) {
String list = f.list();
then u have perform file io for each file and copy them to dir u want
[email protected]

How to calculate commodity code using Tabe MARC and field STAWN.

Hi All,
how to calculate commodity code
This attribute is stored at the Material/Plant level. For each material, this attribute must be evaluated at all applicable plants.
u2022 If ALL values are the same, output the value to the report
u2022 If all values are NOT the same, output u201CNot Consistentu201D in the column for the material
The table to be used is MARC
and the SAP technical field name is STAWN

Hi Debrup,
try this ... i have put down code here ... test it and make changes as needed.
data:
t_marc type standard table of marc with header line,
lv_matnr like marc-matnr,
lv_same type c.
select MATNR WERKS STAWN
from MARC
into corresponding fields of table t_marc.
sort t_marc by matnr werks stawn.
loop at t_marc.
at new matnr.
clear lv_same.
lv_matnr = t_marc-matnr.
endat.
at new stwan.
* material is same but STWAN changed so flag change
if lv_matnr = t_marc-matnr.
lv_same = 'F'. " False.
endif.
endat.
at end of matnr.
if lv_same is intial.
write : t_marc-matnr,t_marc-stwan.
else.
write : t_marc-matnr, 'Not Consistent'.
endif.
endat.
endloop.
hope this helps.
Franc

How to copy a web document on screen and paste it to pages application

how do I copy a web document on screen and paste it to pages application?

Generally all you should have to do is select what you want to copy (and copy it) and paste it into Pages.

How to copy Company Code Account data from a client to another client

Hi.
In prod system, unfortunately, we have deleted all Company Code (CC) data from the system - including accounting payable data, and we need to restore data from backup. So far we have created an new 'spare' client with all restored information.
Next step is to copy CC-related records in related tables from 'spare' client back to prod client and append them into tables were all the records referring this particular CC has been removed.
For instance we see that the prod system is missing all CC-related records for accounting tabels such as BKPF BSEG and others.
The questions are:
1) How can we do this copy?
2) If we need to do this for each single tabel manually, how can we know which tables that needs to be appended in prod system? As far as I have notised, i see this will affect table BKPF, BSEG, BSAK, BSAS, BSIK, BSIP, BSIS. Any others?
We have allready triyed transaction EC01 for this purpose. But, unfortunately, this copy function, regarding Company Code organizational object does not seem to take into account the above-mentioned tabels which I need to restore into prod.
I suppose this must have been an issue before for sombody...?
So can anybody help with a strategy to solve this issue?
Thanks.

Just to be mentioned. This is regarding a particular CC, not all have been removed from the prod system. And I only need to restore accounting information for a spesific CC.

How to create t-code for a table and how to create transaction variant???

Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1.     how to create transaction code to a table. Can any one give me the
                staps??
2.     how to create transaction variant for the above requirement???
Thanks & Regards,
Sarkar

Hi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful

How to copy document no between transactions

HI
   We have seen that, if we processed VA02 with a particular document and then goto VA03 immediately,
the document number will be copied to the VA03 automatically.
        Like that how can we set our own developed transactions.
   Pls help me out.
Thanks in advance
Regards
Rajaram

Can you guide me how to work with abap memeory.

How to copy data from one transaction to the next (F-43)

All,
I have a situation where it appears the due date of an invoice is being copied from a previous invoice entry. Can anyone tell me is there a process where the user can have data default from one invoice to the next and if so is the due date (planning date) one of those fields?
Thanks
Sandra

I understand how it is supposed to work. However, I have production examples of that not happening and I'm trying to figure out how. The only way I have been able to replicate the issue is when I manually enter the due date when entering the invoice the calculation of baseline date + #of days does not happen. Users say they are not manually entering a date so I'm trying to find a way the date could be entered without the users knowledge.
Regards
Sandra

How to copy part of non commercial dvd and use it in imovie?

Hi
I want to use some video from my school that are burned in a dvd (with a PC) and put them on a project that I made with imovie. I have the files audio_TS and the video_TS but I don't know how to use them. I want to import them (or the movie) in imovie but it doesn't work. Somebody have an idea?
Thanks a lot

Hi Stephane,
the usual answer:
get for 20$ the Apple mpeg2 plugin
and for free the tool Streamclip
in Streamclip you can select the parts you want to "copy"...

How many reocrds update in call transaction method and session method

The flat file having the 10 records but the flat file having the 5 th record is error so in session method how many records will update and in call transaction how many records will update.
can you provide with detailed information like in synchrnous mode and asynchronous mode
Regards
reddy

hi,
session method :up to 4 records will be updated as it is in synchronus mode.
Call transaction method : except 5 th all 9 records will be updated as it is assyncronous method.
Regards
sandeep Reddy

How to copy SQLSERVER 2005 to 2012 mdf and log log file

Hi
I have 2005 database mdf and log file and I want to copy this database file into 2012 express edition. Please anybody can tell me how is it possible to copy onto 2012 sqlserver database file
Regards
Pol
polachan

Make sure total database size is not greater than 10 G as maximum database limit in SQL Server 2012 Express is 10 G. You can also use
backup restore method to move SQL Server database.
You need to stop SQL Server service to attach detach database or copy mdf and ldf files.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

How to get Item-Code wise stock quantity and value for a previous date

Dear Sir,
As per the government legal requirement , we are required to furnish a list for items having stock as on a date ( date is not the current date but it is some past date) and in the list we need to provide material wise stock quantity and value .
We can generate a list for the current date , but do not know how to get it for a previous date .
We request you to kindly guide us about such a list .
With Thanks and Regards
Sonia Agarwal

hi,
might be this reports will be help full for your requirement.
MMBE
MB53
MB52
MB5M
MB5B
MB5T
MBLB
MBBS
MB54
ME56
Thanking you

How to copy whole code of transaction FV60 and assign ZFV60

Similar Messages

Maybe you are looking for