How to create 2 lines header in Report painter

Hi. I am not good at Report painter. I want to create 2 lines header in Report painter just like SAP std report.
When I create a new form, I only have one line header form but cannot add additional header line.
I am looking at the 0SAPFS10-01 Trans.Fig.- Balances. which has two header lines
                           Debit              Credit            Balance       Accumulated Balanc
Periods                     &1FY               &1FY               &1FY               &1FY
I can create only one header just like
Periods                 Debit              Credit            Balance       Accumulated Balanc
cannot add additional line for
      &1FY               &1FY               &1FY               &1FY
please advise me
thanks in advance.

In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.

Similar Messages

How to create t.code for report painter report created using CJE5

Hi All,
I'm trying to create T.code for a report painter program created using CJE5.
I using the D_SREPOVARI-REPORTTYPE as "RE" and
D_SREPOVARI-EXTDREPORT as KP 01RPSCO_X <report name>
If I provide spaces between KP 01RPSCO_X <report name>, its not allowing spaces.
If I didn't provide the space then its saying that "report does not exists"
Please let me know how to overcome this issue?.
What this KP & 01RPSCO_X stands for? Is this always constant?
There is a similar kind of transaction in other system which Looks like this " KP 01RPSCO_X <report name>" spaces in between
I dont understand why its not allowing spaces in this system. As its in different system i cant make a copy of this transaction and change the parameters.
Edited by: Mr A on Feb 18, 2010 5:28 PM
Edited by: Mr A on Feb 18, 2010 5:54 PM

thanks for giving me the link.
I searched for all these link in SDN before posting itself.
my issue is how to give the value for the parameater EXTDREPORT.
If i give spaces for the value KP 01RPSCO_X <report name>, its throwing error, T,code its self is inconsistent.
if i didnt give spaces its i'm able to create the t.code, but when i execute it, its giving error message saying "report does not exists"
but if i go to CJE5, that report is there.
thanks

GRCT    HOW TO ADD Z TABLES IN REPORT PAINTER

Hi Gurus
Could you please send me information about how to activate z tables in report painter ?   someone said me that i can user transaction GRCT to do that...¿ what aspects must I consider to add a table ?
mail: [email protected]
Regards
Andrés Moreno

hi Andres,
below are the steps for the Report Painter.....
Create a new report.
Menu Path: Information Systems > Ad hoc reports > Report Painter > Report > Create
On the Report Painter: Create Report screen, enter:
Library 1VK
Report RSS-A
Report Description Report w/Total Row
Hit <Create> button to move to the next screen.
Create the Rows of the Report The first four rows are cost element characteristics
Screen: Report Painter: Create Report
Type Cost Elements in the lead column cell
Double click on Row 1
In the Pop-up window 'Element definition: Row1", enter:
Note: If Pop-up window (select element type) appears, choose 'characteristics' and hit <Enter>.
Select 'Cost Element' as the characteristic in the 'Available characteristics' section
Hit <Move selected to left> button to move the characteristic 'Cost element' to the 'Selected characteristics' section
From 430000
Hit <Change short, middle and long texts> icon (at the bottom of the window)
In the Pop-up for Enter Texts, Enter:
Short Description from Table above for this Account
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close the Pop-up
Hit <Confirm/Enter> to check consistency and close.
Repeat the above steps for the other 3 accounts
Create a formula row to calculate the total of the Cost Element rows
Screen: Report Painter: Create Report
Double click on Row 5 or the next empty row.
In the Pop-up for Select Element Type select 'Formula'
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Formula'
Use the calculator buttons to create the formula Y001 + Y002 + Y003 + Y004
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Texts'
Short Total
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Enter> to close the Pop-up
Make sure your cursor is in the cell containing the word Total
Follow the Menu Path: Formatting > Row
In the Pop-up 'Row Formatting'
Overscore checked
Underscore checked
Hit <Enter> to close the Pop-up
Create the first column for actual costs
Screen: Report Painter: Create Report
Double click on the Column 1 cell.
In the Pop-up 'Select element type'
Select Predefined Key Figure radio button, and press <Enter>.
In Pop-up 'Choose predefined column'
Select Actual Costs as the predefined column, and press <Enter>.
In the Pop-up 'Element definition: Actual costs'
Press <Confirm> to check consistency and close.
Define the second column for plan costs
Screen: Report Painter: Create Report
Double click on the Column 2 cell.
In the Pop-up 'Select element type'
Select Key Figure with Characteristics as the element type, and press <Enter>.
In the Pop-up 'Element definition: Column 2'
Value Type 01   (Plan)
Version 0   (Actuals)
Valuation 0   (Legal valuation)
Hit <Change short, middle and long texts> icon
In the Pop-up for Enter Texts, Enter:
Short Plan
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close Pop-up.
Hit <Confirm> to check consistency and close.
Create a formula column to calculate the variance between actual and plan costs
Screen: Report Painter: Create Report
Double click on the Column 3 cell
Assign the points....
Ranjit

How to create line chart

Hii Experts,
How to create line chart?
I want to prepaire a line chart in a report. i have 1 table. In a table have 2 fields. chart is created in these 2 field refrence how It's possible?
Thanx in Advance
Regards
Vshal

I found it very easy to produce a line chart in a window container using FM GFW_PRES_SHOW. In my case this produces a basic line graph with three lines across 15 time periods.
See transaction GRAL for various chart types...they're relatively easy to produce... I picked DEMO_GFW_PRES_SHOW report program from GRAL as my example for how to produce a simple line chart very quickly.

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to create user editable Crystal Report with dynamic dataset

What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.

The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

Create t.code for report painter in CO-PA

Dear experts!
Now, I'm getting some issue about creating t.code for report painter in CO-PA.
Really, I don't know to create t.code for report painter that is created and run in t.code KE30.
Help me to solve the issue!
Best regards, Huy

Dear Huy,
To create a tcode for report created on the KE30:
1 - Get the parameters from your Z report, on table TKEB2 (on field REPID)
2 - On the SE93 create your tcode with option "Transaction with parameters"
2.1 - On the field "Transaction" fill with START_REPORT
2.2 - Choose the option "Skip inicial screen" and "Inherit GUI attibutes"
2.3 - On "Default Values" use the follow parameters:
D_SREPOVARI-REPORTTYPE <RE>
D_SREPOVARI-REPORT <NULL>
D_SREPOVARI-EXTDREPORT <APPCLASS SUBCLASS+TABNAME REPID>
*This information you got in table TKEB2, eg:
KE 01CE1CPFL ZDREB01
I hope the information has been useful,
Regards,
Melina

How to create radio button in reports

Hi Friends,
Can any body please tell how to create radio button in reports.
Thanks,
Nagendra

Hi Nagendra,
    But why do u need a single radio button, any specific reason...
try this
REPORT ZCHA1.
PARAMETERS : P_RAD1 RADIOBUTTON GROUP RAD,
             P_RAD2 RADIOBUTTON GROUP RAD.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'P_RAD2'.
      SCREEN-INVISIBLE = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.

Changing header in report painter

Hi All,
I have a requirement to change the header(column). I am using the global variable &5PY(Period/Year) in the characterictics value. So it displays an output like 06.2008. But the client needs this to be displayed as June 2008.
Kindly help me out with this.
Regards,
Karthik

In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.

How to create Status in ALV reports?

Hi experts,
                 I need to create a status in a alv report. but i am not getting how to create it. i have declared a variable type slis_formname. and appended the events with it. now how to create the status in form.answers will be rewarded.
Thanks in advance,
Ramana

Hello Venkat,
Copy the standard pf status of the ALV in SE41 and do the following.
DATA: IT_EVENTS TYPE SLIS_T_EVENT,
        WA_EVENTS LIKE LINE OF IT_EVENTS.
REFRESH: IT_EVENTS.
CLEAR: WA_EVENTS,IT_EVENTS.
WA_EVENTS-NAME = 'PF_STATUS_SET'.
WA_EVENTS-FORM = 'STATUS'.
APPEND WA_EVENTS TO IT_EVENTS .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM      = IT_VARIANT-REPORT
            I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
            I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
            IT_FIELDCAT             = IT_FIELDCAT
            I_SAVE                  = 'A'
            IS_VARIANT              = IT_VARIANT
            IT_SORT                 = IT_SORT
            IT_EVENTS               = IT_EVENTS
       TABLES
            T_OUTTAB                = G_T_OUTTAB
       EXCEPTIONS
            PROGRAM_ERROR           = 1
            OTHERS                  = 2.
      FORM status                                                   *
FORM STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING RT_EXTAB.
ENDFORM.
If useful reward.
Vasanth

How to create a matrix like report with description column

Hi,
currently i have two tables - one describing a job and another describing the stock. it is a simple relation where a job uses stock.
i join job and stock using stock_code. there are three categories of stock - namely envelope, insert, stationary.
i wish to create a cross tab report - basically i would like it to look like
jobname, envelope, stationary, insert
abc, e1, s1, i1
, ,s2,i2
def, e2,s3,i4
, e3, , i5
basically for each job i would like to place the stock code under envelope, stationary, or insert based on what type of stock it is. i can do this in sql, however, i get left with blank spaces.
i do this by
select
"FILE_PARAMETER"."FILE_NAME" as "FILE_NAME",
"CATEGORY",
"STOCK"."STOCK_CODE" as "STOCK_CODE",
decode(upper("CATEGORY"), 'LASER', "STOCK_CODE", '') "LASER",
decode(upper("CATEGORY"), 'ENVELOPE', "STOCK_CODE", '') "ENVELOPE",
decode(upper("CATEGORY"), 'INSERT', "STOCK_CODE", '') "INSERT",
decode(upper("CATEGORY"), 'INSERT',"STOCK"."DESCRIPTION",'') "DESCRIPTION"
from
"FILE_PARAMETER" "FILE_PARAMETER",
"JOB_OVERVIEW" "JOB_OVERVIEW",
"STOCK" "STOCK"
where
"FILE_PARAMETER"."FILE_NAME"="JOB_OVERVIEW"."AP_JOB_CODE"
and "FILE_PARAMETER"."SCODE"="STOCK"."STOCK_CODE"
ORDER BY "FILE_PARAMETER"."FILE_NAME", "CATEGORY"
unfortunately this doesn't give me exactly the output i want. i would like it to show the first piece of stock in each category on the first line, and each subsequent stock on the line after that for each job group. my solution at the moment will put the stock in the corresponding stock category column but i have been unable to find a solution to removing the blank space.
i have created the matrix report in developer and it can do what i want, however, it will not show the description for insert only. the way i have grouped it, it wants to show it all, and being a reports newbie i have no idea how to fix that
any solutions would be very much appreciated!

This feature is supported in MS Access and known as CROSSTAB through TRANSFORM function.
In Oracle this exists but not in a elegant way as in MS.
You have addition function GROUP BY ROLLUP and CUBE and GROUP BY GROUPING SETS, available in 10g, which can help you.
Look in manuals and play with it!

How to create column header text while downloading file

How can we create column header text while downloading file using function GUI_DOWNLOAD(in SAP Release 4.6c) because there is no FIELDNAMES parameter in
4.6c version.

Hii,
Check this sample code. I have called GUI_DOWNLOAD twice. Onetime to download header of table and next time data of table
REPORT z_file_download.
DATA: w_name(90) TYPE c.
DATA:
BEGIN OF fs_flight,
    carrid   LIKE sflight-carrid,
    connid   LIKE sflight-connid,
    fldate   LIKE sflight-fldate,
    price    LIKE sflight-price,
    currency LIKE sflight-currency,
END OF fs_flight.
DATA:
BEGIN OF fs_head,
    carrid(10) TYPE c,
    connid(10) TYPE c,
    fldate(10) TYPE c,
    price(10) TYPE c,
    curr(10) TYPE c,
END OF fs_head.
DATA:
t_head LIKE
   TABLE OF
         fs_head.
DATA:
t_flight LIKE
     TABLE OF
           fs_flight.
fs_head-carrid = 'CARRID'.
fs_head-connid = 'CONNID'.
fs_head-fldate = 'FLDATE'.
fs_head-price = 'PRICE'.
fs_head-curr   = 'CURRENCY'.
APPEND fs_head TO t_head.
SELECT-OPTIONS:
s_carrid FOR fs_flight-carrid.
START-OF-SELECTION.
SELECT carrid
         connid
         fldate
         price
         currency
    FROM sflight
    INTO TABLE t_flight
   WHERE carrid IN s_carrid.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    filename                      = 'D:\flight.xls'
   FILETYPE                      = 'ASC'
*   APPEND                        = ' '
    WRITE_FIELD_SEPARATOR         = 'X'
*   HEADER                        = '00'
*   TRUNC_TRAILING_BLANKS         = ' '
*   WRITE_LF                      = 'X'
*   COL_SELECT                    = ' '
*   COL_SELECT_MASK               = ' '
*   DAT_MODE                      = ' '
*   CONFIRM_OVERWRITE             = ' '
*   NO_AUTH_CHECK                 = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   WRITE_BOM                     = ' '
* IMPORTING
*   FILELENGTH                    =
tables
    data_tab                      = t_head
EXCEPTIONS
   FILE_WRITE_ERROR              = 1
   NO_BATCH                      = 2
   GUI_REFUSE_FILETRANSFER       = 3
   INVALID_TYPE                  = 4
   NO_AUTHORITY                  = 5
   UNKNOWN_ERROR                 = 6
   HEADER_NOT_ALLOWED            = 7
   SEPARATOR_NOT_ALLOWED         = 8
   FILESIZE_NOT_ALLOWED          = 9
   HEADER_TOO_LONG               = 10
   DP_ERROR_CREATE               = 11
   DP_ERROR_SEND                 = 12
   DP_ERROR_WRITE                = 13
   UNKNOWN_DP_ERROR              = 14
   ACCESS_DENIED                 = 15
   DP_OUT_OF_MEMORY              = 16
   DISK_FULL                     = 17
   DP_TIMEOUT                    = 18
   FILE_NOT_FOUND                = 19
   DATAPROVIDER_EXCEPTION        = 20
   CONTROL_FLUSH_ERROR           = 21
   OTHERS                        = 22
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = 'D:\flight.xls'
      filetype                = 'ASC'
      append                  = 'X'
      write_field_separator   = 'X'
    TABLES
      data_tab                = t_flight
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc EQ 0.
    MESSAGE 'Download successful' TYPE 'I'.
ENDIF.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Abhijeet

How to use Value Variable in Report Painter Column defined as Formula

Hi Gurus,
In report painter, how can I add one field (exchange rate) in selection screen, so that user can provide the exchange rate to be used, then execute the report, the exchange rate will used to multiple local currency amount.
The reason for this is we want use provided exchange rate to convert the amount from once currency to the other currency.
Alternatively I am studying the functionality of "Value Variable" and found that I can perform the task from this. I have created the value variable but when I am using the variable in Report Painter columns as "&ZVALVAR", system is giving me error. I read the help and it states that use the variable with "&" and do it as it is mentioned.
Can anybody suggest what I need to do to make it workable.
Thanks

I did try using the presentation variable, but that does not work too. I am setting session variable in the dashboard prompt (select 'request variable'). When I use presentation variable, it hard codes the value of the variable name.
sql is
select date from work_order where facility = @{p_facility}
the physical log sql is
select date from work_order where facility = 'p_facility'

How to add Custom code in Report Painter

Hi All,
I have a requirement to add Authorization checks at Profit Center Level for 8A-PCA001G report. This is the first time am working on Report Painter/Writer. I am wondering whether i can add custom code or not. Please suggest me how to do this. I copied 8A-PCA001G into a zreport but did not find anywhere to add custom code.
Any help would be really appreciated.
Thanks,
Kumar

Hi Kumar,
You cannot write custom code (0% coding) in an Report Writer/Painter report. The code is generated by SAP while generating the Report group. The only place in a report writer report where you can write very minimal code is at varables level or formulas inside reports.
At the report group header level, there is provision to provide authorization group. Try that.
Regards,
Subin John.
Edited by: subin john on Mar 24, 2011 10:36 AM

How to add new Characteristic in Report painter?

Hi All,
My requirement is Create/Modify a Report in Report Painter/Writer which should generate cost information in Controlling Area Currency for all sites (domestic & international) associated to the Project. Earlier same Report is fecthing Object Currency Values for the given Project.
When i tried to add "Controlling Area currency" in place of "Object Currency" characteristic, then from the available characteristics of the FORM/Report, i am unable to find the "Controlling Area urrency".
Please let me know how to get this "Controlling Area currency" characteristic.
Note: This Report is intially developed in Report painter So no ABAP code is present , So People who knows Report painter/Report Writer concepts with Currency translations can helpme out.
Please do the needful as i am new to Report Painter please Give T-codes and any useful links regarding this Multiple Currency handling /Currency conversion concepts of Report Painter.

I am designing the P&L report and I want to split my R&D expenses split down by Internal Orders. Since, I have not seen Internal order field in summary table of new GL..ie., FAGFLEXT table.
I want to know how this can be achieved in the same report in report painter.
I am talking this issue from Report Painter point of view where each report is based on library , which is defined per summary table.(ie., Library can refer to only one table....finding it odd to believe there is no join in reporting tool).....
Thanks and let me know if you want to know more on the issue I am facing.

How to create 2 lines header in Report painter

Similar Messages

Maybe you are looking for