How to create a DB Adapter with select query having inner query

Hi All,
I am trying to create a DB Adapter with select query. The query has some inner queries in it. It is just like this select a, b, c, (select d from e) d, (select e from e) e from tablename.
The problem here is with the xsd generated for this query. Xsd is not getting generated properly for all the fields it is just getting generated till c element and when it encounters
the inner query it is stopping the generation of xsd. So for the above query the xsd is something similar to the below
<xs:complexType name="rewOutput">
<xs:sequence>
<xs:element name="a" type="xs:string" nillable="true"/>
<xs:element name="b" type="xs:string" nillable="true"/>
<xs:element name="c" type="xs:string" nillable="true"/>
<xs:element name="select_d" type="xs:string" nillable="true"/>
</xs:sequence>
</xs:complexType>
as shown above the xsd is just getting generated till the first inner query. What should be done to get the full fledged xsd. Should it be manually built ?? Please help me on this.
Thanks In Advance.
Edited by: 959766 on Nov 30, 2012 1:20 AM

Hi,
I don't think the parser will be able to understand your query properly... I would try building the xsd manually...
Cheers,
Vlad

Similar Messages

How to create a master form with selectable/insertable subforms?

I have created a general information form for business services we offer, at the bottom of the form I have made several check boxes so that the person who fills out the form with all of the general information can then select the service they want to sign up for-
Is there a way to make my form open the specific subform for the services that are selected?
for instance-
They fill out their name, address etc and then select the check box for services they want- ideally i would like adobe to know that there is another form associated with that check box and then add that form onto the bottom of the general information form so that the customer can then complete the order form for that service instead of having to go back and request the specific form for that service that they selected on the general information form.
I am not sure how to put this clearly??
Example:
Please select the services you desire from the items below
(Check box) Toll Free
(Check box) SIP Interop
(Check box) Hosted IP
Say they selected toll free and sip interop from the list, is there a way to make adobe know that it then needs to open those 2 separate forms so the person can complete them?

Create a JPanel based on the second detail table with the wizard and add manually the JPanel to the Master-detail Form.
Regards
Fred

How to create an unsolved cube with awm???

hi all,
I readed the "Oracle Olap developer's guide to the Oalp api" and I found there's 2 type of Cube: Solved and Unsolved Cubes. And this document says: "... if all the data for a cube is specified by the DBA, then the cube is considered to be Solved. If some or all of the aggregate data must be calculated by Oracle OLap, then the cube is unsolved ..."
I tried with awm 10.2.0.3.0A to create an unsolvedCube but I can't. All cubes I created are solvedCube. To know if a cube is solved or unsolved, I wrotte an program in Java to read informations of package mtm.
Some one can tell me how to create an unsolved cube with AWM ou other soft please!

SH is not a relational OLAP data model which is quite different from the GLOBAL schema which is based on an Analytic Workspace.
If you change the aggregation method you will need to re-compute the whole cube which can be a very big job! You might be able to force the unsolved status be de-selecting all the levels on the Rules tab in AWM. However, I think by default analytic workspace OLAP models always provide a fully solved cube to the outside world. This is the nature of the multi-dimensional model.
Relationally, as keys are located in separate columns a cube can be unsolved in that the key column only contains values for a single level from the corresponding dimension tables. If more than keys for different levels within the same dimension appear within the fact key column then the cube is deemed as being solved.
Therefore, I am not sure you are going to get the information you require from the API. To changes the aggregation method you will have to switch off all pre-compute options and also disable the session cache to prevent previously calculated data being returned when you change the aggregation method.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

How to create a test plan with specific transactions (or program)

Hello,
I'm a new user in Sol Man !
How to create a test plan with specific transactions (or program).
In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
In my test plan (STWB_2) those specific doesn't appear to be selected !
Thanks in advance.
Georges HUYNEN

Hi
In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
Also visit my weblog
/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
please reward points.

How to create a web template with company logo

how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
thanks to you all

Hi
1) Please read
http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
2) Create a condition in the Query Designer: Use a formula variable
See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
Heike

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

How to create a csv file with NCS attributes?

Hi
i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
How to create a csv file with all required attributes?
This is part of NCS online help talking about this topic:
Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
Note The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
Bellow is test csv file i created but does not work:
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
The error i am getting while importing this file:
Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
Assistance appreciated.

It looks like the IP address field is incorrectly set.,
It should be as follows
{Device IP},{Device Subnet Mask}, etc etc
so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
below is a link to the documentation
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
HTH
Darren

How to create item wise invoice with reference to sales order.

Hi ,
Please let me know how to create item wise invoice with reference to sales order.
Ex : Sales order has 2 line items .
When creating invoice system should create two invoices for each line items.
I have tried with copy control but I am not able to do it.
Please advise.
Regards

Hi,
Please let us know your exact requirement. Whether you want it to be fixed like only one line item to be billed every time ot it to be based on selection you do every time.
As per my understanding it should not be fixed and in that case it should like as follows,
In VF01 you will select Del. document/S.O. number and click on selection list and will take you to next screen as mention below,
and select desire line item to be billed and click on copy and will take you to billing screen.
Regards,
Ajit K Singh

How to create a material master with referrence to exsisting material maste

hi experts
how to create the material master with reference to an existing material master ?
please explain in steps
regards
jai

Dear,
It is very simple.
Enter MM01 t-code.
Enter your existing material code in field of reference material code.
If your material number range is external number range then enter number of material otherwise direct enter industry sector and material type.
After enter basic detail system ask you plant/storage location detail and view detail.
Select reference plant and storage location in left sight of diglog and enter plant and storage location in right sight of diglog screen for which you want to maintain material master.
Then click on all view, If you want to change some detail change it.
Due to reference material all detail is come from reference material.
Then click on save.
NOTE: - You can create new material with reference of old material but it is prerequest material type should be same of both material old and new.
Regards,
Mahesh Wagh

How to create Option Boxes IN A SELECTION SCREEN

How to create Option Boxes IN A SELECTION SCREEN.
Thanks!

Hi Rajesh,
The following explanation gives clear picture of what is mean of check box and radio button with coding.....................
CHECK BOX :
AS CHECKBOX [USER-COMMAND fcode]
Effect:
This addition specifies that the input field in the first position of the selection screen is displayed as a checkbox, with the corresponding description next to it on the right. The checkbox is selected if the value of para is "X" or r "x". Otherwise, it is not selected.
The parameter must be created with the type c and length 1. An explicit length len is not permitted. If the addition TYPE is used, this can only be followed by the generic type c or a non-generic data type of type c and length 1.
The addition USER-COMMAND can be used to assign a function code fcode to the parameter. The function code fcode must be directly specified and may have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects the checkbox on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Notes
If the TYPE addition is used to make a reference to a data type in the ABAP Dictionary of type CHAR and length 1, and for which t the valid values in the domain are defined as "X" and " ", the parameter is automatically displayed as a checkbox on the selection screen.
If the addition USER-COMMAND is specified without the addition AS CHECKBOX, and the parameter is of type c with length 1, it is also displayed as a checkbox.
The addition USER-COMMAND can, for example, be used for screen modifications with the addition MODIF ID (see example).
Coding :
PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p1(10) TYPE c,
 p2(10) TYPE c,
 p3(10) TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p4(10) TYPE c MODIF ID bl2,
 p5(10) TYPE c MODIF ID bl2,
 p6(10) TYPE c MODIF ID bl2.
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
 IF show_all <> 'X' AND
 screen-group1 = 'BL2'.
 screen-active = '0'.
 ENDIF.
 MODIFY SCREEN.
ENDLOOP.
RADIO BUTTON COMMAND :
RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type c and length 1.
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
CODING :
tables : mkpf,mseg,ekko.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1,
 c as checkbox.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X' USER-COMMAND UC1.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
write :/ p_werks,
 / s_ebeln.
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN .
IF R1 EQ 'X' AND SCREEN-GROUP1 EQ 'S2'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
IF R2 EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
SCREEN-INPUT = 0.
SCREEN-REQUIRED = 1.
clear s_ebeln[].
clear p_werks.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Let me knwo if any doubts.
Reward with points if it helpful
Regards,
Vijay

How to lock windows 8.1 with selected applications

In windows 8.1 how to make a kiosk mode with selected application(Mail, IE, Camera & Reader)

check this, hope it will answer your question
http://blogs.technet.com/b/canitpro/archive/2013/12/17/step-by-step-enabling-kiosk-mode-in-windows-8-1-via-assigned-access.aspx

How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?

1. How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?
When multiple tables are involved , and the actual number of rows returned is more than what the explain plan tells. How can I find out what change is needed in the stat plan ?
2. Does rowsource statistics gives some kind of understanding of Extended stats ?

You can get Row Source Statistics only *after* the SQL has been executed. An Explain Plan midway cannot give you row source statistics.
To get row source statistics either set STATISTICS_LEVEL='ALL' in the session that executes theSQL OR use the Hint "gather_plan_statistics" in the SQL being executed.
Then use dbms_xplan.display_cursor
Hemant K Chitale

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

How to create a pdf file with CS5

Hello, I'm new to PhotoShop CS5 and haven't figured out yet (despite two hours of trying) how to create a pdf file with pictures and texts. Can someone please help me with this ? The "help" button in CS5 doesn't seem to cover this question. Nor do the FAQs.
Thank you very much.

Save As... Photoshop PDF.

How to use digital av adapter with iphone4

How to use digital av adapter with iphone4

you can connect it to the iphone4's connector and then you can start an app which support av out like apples video app and then it will display on the tv connected
the iphone4 don't support mirror though so only apps which support tv out will work with it

How to create a DB Adapter with select query having inner query

Similar Messages

Maybe you are looking for