How to create a Filter based on 2 or more columns

Hi Folks,
We have a requirement to filter based on 1 column, 2 columns and 3 columns values to an analysis with measures.
So my question is whether we can acheive this in OBIEE, If so then what would be the best way to implement it.
Thanks,
Vj

Hi Vj,
This we can leverage using BINS,But i have never tried that.
Check this
http://www.onyxtraining.com/blog/bid/92181/Multiple-Conditions-and-Filtering-in-OBIEE
Mark if helps.
Thanks,

Similar Messages

How to create a filter based on Effective date EFFDT

Hello to all,
I am currently creating reports from an HR database that stores records by employee (EMPLID) based on effective date(EFFDT) and Effective Sequence (EFFSEQ).
It is easy to get a report that shows all entries up to a certain data (using <= or >=), however, I am not able to create a Filter (in the report or in the prompt)
that shows me the MAX(EFFDT) up to a certain data dd/mm/yyyy. (any one)
The sql script we use is the follwiing
SELECT A.EFFDT, A.EFFSEQ, A.ACTION, A.EMPL_CLASS, *
FROM PS_JOB A
WHERE A.EMPLID=' ' ----*(PROMPT1)*
AND A.EFFDT=(SELECT MAX(B.EFFDT) FROM PS_JOB B
WHERE B.EMPLID=A.EMPLID
AND B.EFFDT<=' ') *(PROMPT2)*
AND A.EFFSEQ=(SELECT MAX(B.EFFSEQ) FROM PS_JOB B
WHERE B.EMPLID=A.EMPLID
AND B.EFFDT=A.EFFDT)
Do I need to create a variable? If yes, How?
Please send me your suggestions or past experiences with BI on the subject.
Thanks
Roberto

Hi Roberto,
I would create a session variable via the Oracle BI Administration Tool.
See the following of how to achieve this:
http://download.oracle.com/docs/cd/E12096_01/books/admintool/admintool_Variables4.html
Reference this variable in your filter. It looks something like this VALUEOF(NQ_SESSION."VARIABLE_NAME")
Good Luck,
Daan Bakboord

How to create LDAP filter-based rule to check Group membership in OAM

Hi folks,
I'm having hard time creating an authorization rule to verify ldap group membership. I've followed "Configure User Authorization" article from Oracle website (http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/b32420/v2authz.htm#BABHBFEJI) and created an Authorization scheme w ldap_attribute_name as User Parameter and ruleExpression as Required Parameter. Then, inside my policy I created an Authorization Rule based on my Authz scheme w Allow Access attrib filter-based Rule which looks like this:
ldap://ldap_server:port/ou=People,o=Company,c=US??sub?(ldap_attribute_name=ldap_attribute_value)
This works fine.
Now, I've added another filter-based rule under the same Authz Rule/Allow Access:
ldap://ldap_server:port/ou=Groups,o=Company,c=US?uniqueMember?sub?(&(objectClass=groupOfUniqueNames)(cn=ldap_group_name))
While query looks somewhat correct and works as a command-line argument (slightly modified format), it does not work in OAM (meaning people w out req-d group membership can still login).
Can someone steer me to the right direction as to what do I need to do:
1. Change/fix the ldap query
2. Create new Authz scheme with uniqueMember userParameter; create new Authz rule based on new authz scheme; create new Allow Access filter rule with the ldap query I have
3. Do smth else
Any help is greatly appreciated.
Thank you, Roman

You can create two authorization rules
First for user with attribute
and second for group
and then in authorization expression you can have AND of these two.
Regarding your query...
First ... If your requirement is to give access to all the members of a particular group then you don't require any ldap filters
All you have to do is in the authorization rule -> Allow access -> Select People (here you have to select group so click on the group tab, its little hard to see but its there in light blue color on dark blue tab) -> select the group you want to give access
Second.. If your requirement is such that you want to give access to a member of a group which has certain attribute lets say group with status active ( In this case you are not aware of the name of the group because user can be a member of any group but you want to give access only to the group with specific attribute.) then you have to write custom authorization plugin.
If the option is second let me know i can give you a solution which will work for a single domain without any effort of developing a major plugin.
Hope this helps,
Sagar

How to create a report based on a DataSet programatically

I'm working on a CR 2008 Add-in.
Usage of this add-in is: Let the user choose from a list of predefined datasets, and create a totally empty report with this dataset attached to is. So the user can create a report based on this dataset.
I have a dataset in memory, and want to create a new report in cr2008.
The new report is a blank report (with no connection information).
If I set the ReportDocument.SetDataSource(Dataset dataSet) property, I get the error:
The report has no tables.
So I must programmatically define the table definition in my blank report.
I found the following article: https://boc.sdn.sap.com/node/869, and came up with something like this:
internal class NewReportWorker : Worker
      public NewReportWorker(string reportFileName)
         : base(reportFileName)
public override void Process()
         DatabaseController databaseController = ClientDoc.DatabaseController;
         Table table = new Table();
         string tabelName = "Table140";
         table.Name = tabelName;
         table.Alias = tabelName;
         table.QualifiedName = tabelName;
         table.Description = tabelName;
         var fields = new Fields();
         var dbField = new DBField();
         var fieldName = "ID";
         dbField.Description = fieldName;
         dbField.HeadingText = fieldName;
         dbField.Name = fieldName;
         dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
         fields.Add(dbField);
         dbField = new DBField();
         fieldName = "IDLEGITIMATIEBEWIJS";
         dbField.Description = fieldName;
         dbField.HeadingText = fieldName;
         dbField.Name = fieldName;
         dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
         fields.Add(dbField);
         // More code for more tables to add.
         table.DataFields = fields;
         //CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo info =
         //   new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
         //info.Attributes.Add("Databse DLL", "xxx.dll");
         //table.ConnectionInfo = info;
         // Here an error occurs.
         databaseController.AddTable(table, null);
         ReportDoc.SetDataSource( [MyFilledDataSet] );
         //object path = @"d:\logfiles\";
         //ClientDoc.SaveAs("test.rpt", ref path, 0);
The object ClientDoc referes to a ISCDReportClientDocument in a base class:
   internal abstract class Worker
      private ReportDocument _ReportDoc;
      private ISCDReportClientDocument _ClientDoc;
      private string _ReportFileName;
      public Worker(string reportFileName)
         _ReportFileName = reportFileName;
         _ReportDoc = new ReportDocument();
         // Load the report from file path passed by the designer.
         _ReportDoc.Load(reportFileName);
         // Create a RAS Document through In-Proc RAS through the RPTDoc.
         _ClientDoc = _ReportDoc.ReportClientDocument;
      public string ReportFileName
         get
            return _ReportFileName;
      public ReportDocument ReportDoc
         get
            return _ReportDoc;
      public ISCDReportClientDocument ClientDoc
         get
            return _ClientDoc;
But I get an "Unspecified error" on the line databaseController.AddTable(table, null);
What am i doing wrong? Or is there another way to create a new report based on a DataSet in C# code?

Hi,
Have a look at the snippet code below written for version 9 that you might accommodate to CR 2008, it demonstrates how to create a report based on a DataSet programmatically.
//=========================================================================
+           * the following two string values can be modified to reflect your system+
+          ************************************************************************************************/+
+          string mdb_path = "C:
program files
crystal decisions
crystal reports 9
samples
en
databases
xtreme.mdb";    // path to xtreme.mdb file+
+          string xsd_path = "C:
Crystal
rasnet
ras9_csharp_win_datasetreport
customer.xsd"; // path to customer schema file+
+          // Dataset+
+          OleDbConnection m_connection;                         // ado.net connection+
+          OleDbDataAdapter m_adapter;                              // ado.net adapter+
+          System.Data.DataSet m_dataset;                         // ado.net dataset+
+          // CR variables+
+          ReportClientDocument m_crReportDocument;          // report client document+
+          Field m_crFieldCustomer;+
+          Field m_crFieldCountry;+
+          void CreateData()+
+          {+
+               // Create OLEDB connection+
+               m_connection = new OleDbConnection();+
+               m_connection.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + mdb_path;+
+               // Create Data Adapter+
+               m_adapter = new OleDbDataAdapter("select * from Customer where Country='Canada'", m_connection);+
+               // create dataset and fill+
+               m_dataset = new System.Data.DataSet();+
+               m_adapter.Fill(m_dataset, "Customer");+
+               // create a schema file+
+               m_dataset.WriteXmlSchema(xsd_path);+
+          }+
+          // Adds a DataSource using dataset. Since this does not require intermediate schema file, this method+
+          // will work in a distributed environment where you have IIS box on server A and RAS Server on server B.+
+          void AddDataSourceUsingDataSet(+
+               ReportClientDocument rcDoc,          // report client document+
+               System.Data.DataSet data)          // dataset+
+          {+
+               // add a datasource+
+               DataSetConverter.AddDataSource(rcDoc, data);+
+          }+
+          // Adds a DataSource using a physical schema file. This method require you to have schema file in RAS Server+
+          // box (NOT ON SDK BOX). In distributed environment where you have IIS on server A and RAS on server B,+
+          // and you execute CreateData above, schema file is created in IIS box, and this method will fail, because+
+          // RAS server cannot see that schema file on its local machine. In such environment, you must use method+
+          // above.+
+          void AddDataSourceUsingSchemaFile(+
+               ReportClientDocument rcDoc,          // report client document+
+               string schema_file_name,          // xml schema file location+
+               string table_name,                    // table to be added+
+               System.Data.DataSet data)          // dataset+
+          {+
+               PropertyBag crLogonInfo;               // logon info+
+               PropertyBag crAttributes;               // logon attributes+
+               ConnectionInfo crConnectionInfo;     // connection info+
+               CrystalDecisions.ReportAppServer.DataDefModel.Table crTable;+
+               // database table+
+               // create logon property+
+               crLogonInfo = new PropertyBag();+
+               crLogonInfo["XML File Path"] = schema_file_name;+
+               // create logon attributes+
+               crAttributes = new PropertyBag();+
+               crAttributes["Database DLL"] = "crdb_adoplus.dll";+
+               crAttributes["QE_DatabaseType"] = "ADO.NET (XML)";+
+               crAttributes["QE_ServerDescription"] = "NewDataSet";+
+               crAttributes["QE_SQLDB"] = true;+
+               crAttributes["QE_LogonProperties"] = crLogonInfo;+
+               // create connection info+
+               crConnectionInfo = new ConnectionInfo();+
+               crConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;+
+               crConnectionInfo.Attributes = crAttributes;+
+               // create a table+
+               crTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();+
+               crTable.ConnectionInfo = crConnectionInfo;+
+               crTable.Name = table_name;+
+               crTable.Alias = table_name;+
+               // add a table+
+               rcDoc.DatabaseController.AddTable(crTable, null);+
+               // pass dataset+
+               rcDoc.DatabaseController.SetDataSource(DataSetConverter.Convert(data), table_name, table_name);+
+          }+
+          void CreateReport()+
+          {+
+               int iField;+
+               // create ado.net dataset+
+               CreateData();+
+               // create report client document+
+               m_crReportDocument = new ReportClientDocument();+
+               m_crReportDocument.ReportAppServer = "127.0.0.1";+
+               // new report document+
+               m_crReportDocument.New();+
+               // add a datasource using a schema file+
+               // note that if you have distributed environment, you should use AddDataSourceUsingDataSet method instead.+
+               // for more information, refer to comments on these methods.+
+               AddDataSourceUsingSchemaFile(m_crReportDocument, xsd_path, "Customer", m_dataset);+
+                              +
+               // get Customer Name and Country fields+
+               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Customer Name", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+               m_crFieldCustomer = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+               iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Country", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+               m_crFieldCountry = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+               // add Customer Name and Country fields+
+               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCustomer);+
+               m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCountry);+
+               // view report+
+               crystalReportViewer1.ReportSource = m_crReportDocument;+
+          }+
+          public Form1()+
+          {+
+               //+
+               // Required for Windows Form Designer support+
+               //+
+               InitializeComponent();+
+               // Create Report+
+               CreateReport();+
+               //+
+               // TODO: Add any constructor code after InitializeComponent call+
+               //+
+          }+//=========================================================================

HOW TO CREATE A DFF BASED ON ORGANIZATION

Hi,
I want to create a DFF which would have 5 different context values, i want 2 of them to be available in one organization and other 3 in other organization, how i can achieve this.
Regards,
Usman.

Hello,
"HOW TO CREATE A DFF BASED ON ORGANIZATION"
1- I will create a customized table having two columns one is for context name and other is for org_id,
2- then i will create a value set on this table and will use this on 'Value Set' field on 'Descriptive Flexfield Segments' window.
3- In the where clause of this value set i will pass org_id from profile $PROFILES$.ORG_ID,
4- this will restrict the context based on org_id And user will only have context related to there org
I have successfully achieved the above requirment.
Find below the restriction you should follow so that Value set is available in LOVs on "Descriptive Flexfield Segments" window:
Value sets used for context fields must obey certain restrictions or they will not be available to use in the Value Set field in the Context Field region of the Descriptive
Flexfield Segments window:
• Format Type must be Character (Char)
• Numbers Only must not be checked (alphabetic characters are allowed)
• Uppercase Only must not be checked (mixed case is allowed)
• Right-justify and Zero-fill Numbers must not be checked
• Validation Type must be Independent or Table
If the validation type is Independent:
• the value set maximum size must be less than or equal to 30
If the validation type is Table:
• the ID Column must be defined, it must be Char or Varchar2 type, and its size must
be less than or equal to 30. The ID column corresponds to the context field value
code (the internal, non-translated context field value).
• the Value Column must be defined, it must be Char or Varchar2 type, and its size
must be less than or equal to 80. The Value column corresponds to the context field
value name (the displayed context field value).
• the value set maximum size must be less than or equal to 80
All context field values (the code values) you intend to use must exist in the value set. If
you define context field values in the Context Field Values block of the Descriptive
Flexfield Segments window that do not exist in the context field value set, they will be
ignored, even if you have defined context-sensitive segments for them.
Best Regards,
Usman.

How to create a record based on the name of a file in the file-system?

Hi,
With a lot of pictures I want to have a database to gather some information about these pictures.
First question is how to generate a record based on a file in the file system?
e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
any suggestions?
any reaction will be appreciated.
Leo

Link to Create directory
http://www.adp-gmbh.ch/ora/sql/create_directory.html
You can create a list of files in the directory and read the list files from that directory.
[UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
[Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
SS

How to create a report based on selected item from Select list?

Hi,
I have created a tables_LOV based on:
select table_name d, table_name r from user_tab_cols
where column_name like '%_type%'
Then I created a page item ListOfTables, Display as select list and pointing to tables_LOV.
I run the page, and i can select the table i want from the drop down list.
How to create a report based on the selected item? (ex: select * from selected_table)
many thanks in advance
Salah

Hi Salah,
Allright, have a look at this page: http://apex.oracle.com/pls/apex/f?p=vincentdeelen:collection_report
I think that simulates what you're trying to accomplish. I've set up the simplest method I could think of.
The report is based on an apex collection. If you are not familiar with that, you should study the documentation: APEX_COLLECTION
To recreate my example you should:
1) create an (interactive) report on your collection
SELECT *
   FROM APEX_collections
WHERE collection_name = 'MY_COLLECTION'
2) create a page_item select list for the tables you want to display (in my case this is called "P38_TABLES" )
3) create a dynamic action that triggers on change of your select list page_item. The dynamic action must be a PL/SQL procedure perfoming the following code:
declare
l_query varchar2(4000);
begin
l_query := 'select * from '||:P38_TABLES;
if apex_collection.collection_exists
        ( p_collection_name => 'MY_COLLECTION' )
then
    apex_collection.delete_collection
      ( p_collection_name => 'MY_COLLECTION' );
end if;
apex_collection.create_collection_from_query
    ( p_collection_name => 'MY_COLLECTION'
    , p_query           => l_query
end;
Make sure you add your page_item to the "Page Items to Submit" section.
4) Add an extra true action that does a refresh of the report region.
Here are two pictures describing the da:
http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA1.png
http://www.vincentdeelen.com/images/otn/OTN_COLLECTION_REPORT_DA2.png
Good luck and regards,
Vincent
http://vincentdeelen.blogspot.com

How to create dynamic context based on a structure defined in the program?

Hi Experts,
         I need to create a dynamic context based on a structure wa_struc which i have define programatically.
When I pass wa_struc to structure_name parameter of create_nodeinfo_from_struc, i get a runtime error:
"Parameter STRUCTURE_NAME contains an invalid value wa_struc."
How to create dynamic context based on a structure defined in the program?
I have written the code like this:
TYPES: BEGIN OF t_type,
            v_carrid TYPE sflight-carrid,
            v_connid TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
         wa_struc type t_type.
data: dyn_node   type ref to if_wd_context_node.
data: rootnode_info   type ref to if_wd_context_node_info.
rootnode_info = wd_context->get_node_info( ).
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
cl_wd_dynamic_tool=>create_nodeinfo_from_struct(
parent_info = rootnode_info
node_name = 'dynflight'
structure_name = 'wa_struc'
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( name = 'dynflight' ).
dyn_node->bind_table( i_struc ).
Thanks
Gopal
Message was edited by: gopalkrishna baliga

Hi Michelle,
          First of all Special thanks for your informative answers to my other forum questions. I really appreciate your help.
Coming back to this question I am still waiting for an answer. Please help. Note that my structure is not in a dictionary.
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
I have updated my code like the following and I am getting error:
TYPES: BEGIN OF t_type,
CARRID TYPE sflight-carrid,
CONNID TYPE sflight-connid,
END OF t_type.
Data: i_struc type table of t_type,
dyn_node type ref to if_wd_context_node,
rootnode_info type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
wa_node_att-name = 'CARRID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
insert wa_node_att into table i_node_att.
wa_node_att-name = 'CONNID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
attributes = i_node_att
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
But now I am getting the following error :
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
-Gopal
Message was edited by: gopalkrishna baliga

How to create an ODS based on a particular table

Can Anybody tell me how to create an ODS based on a particular table and what are the basic requirements for that

Hi Priya,
If my understanding is right, you want to create an ODS based on a database table.
Here, I will assume that you already know how to create an ODS. Otherwise, do let me know so that I can guide you on how to do it.
Basically, an ODS consists of two important sections i.e.
1. Key Fields
2. Data Fields
First, we must identify what are the field(s) in the table that make its records unique. You can think of this as database's primary key(s) e.g. Document Number. These field(s) must be inserted in ODS' Key Fields section. You can only insert Characteristics in Key Fields and the InfoObjects in this section will uniquely identify an ODS record or line item.
Next, you can include the rest of the fields (either Characteristics and Key Figures) in ODS' Data Fields and activate the ODS.
Having done that, you have already successfully create an ODS based on a database table.
Hope that helps.
Best wishes,
Syuhair.

How to create the PO based on requisition through interface.

Hi,
In P2P,
How to create the PO based on requisition through interface.
Regards,
Srikanth

Hi Srikanth,
I knew it from frontend.
But i want from backend using INTERFACE .please see if this can help you
http://appshub-hussy.blogspot.com/2010/10/requisition-and-purchase-order-queries.html
http://oraclemaniac.com/2012/04/17/sql-queries-to-get-requisition-po-and-po-receipt-details/
SQL to link Requisitions with Purchase Orders
http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/how-to-find-the-po-number-if-we-give-requisition-number-3161211
http://oracle.ittoolbox.com/groups/technical-functional/oracle-apps-l/need-requisition-sql-query-1338985
;) AppSmAstI ;)
sharing is CAring

How to create 2D array with 3 rows and unlimit column?

how to create 2D array with 3 rows and unlimit column?

Here are images of what I described in my previous post
Message Edited by JoeLabView on 11-14-2007 07:56 AM
Attachments:
2D-array_code.PNG ‏7 KB
2D-array_values.PNG ‏13 KB

SMARTFORM: how to create 3 copy (each copy can print more than one page)

SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 page

Hello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
           EXPORTING
                     COUNTER = l_COUNTER   " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM

How to create a unique key using two or more attributes?

how to create a unique key using two or more attributes ?

The following example illustrate how to create a unique key using two or more attributes/fields
Scenario: Implementing Unique Key on ManagerID & Location ID in DepartmentEO(Department Table)
Step#1: Open the Desired Entity Object “DepartmentEO”. Go to Overview tab & Click “General” Finger tab.
Step#2: Expand “Alternate Keys” section & click “+”.
Step#3: In the Pop-up wizard, Enter a name for alternate Key “Unique_Manager_X_Location”.
Step#4: Select the desired attributes/fields from available list & Shuffle to right side.
Step#5: Now go to “Business Rules” finger tab.
Step#6: Select “Entity Validators” in the list & click “+” to add a new entity level validation rule.
Step#7: In the Pop-up, Select “Rule Type” as Unique Key
Step#8: In the “Rule Definition” tab select the key “Unique_Manager_X_Location”created.
Step#9: Now go to “Failure Handling” tab, and click the Magnifier Icon .
Step#10: If the key is not already created then in the “Select Text Resource” Popup, Using the functional design document, Enter display value, Key and Description. And click “Save & Select” Button.
Step#11: Now Click “OK”.

How to create a view based on Lookup Column?

Hi All,
I am working as a SharePoint developer 2013.
When i tried to create a view based on look up column it is not showing lookup column.
How to fix this problem?
Please help me out here.
Thanks & Regards,
Santhoshi

can you elaborate the issue? Do you mean you cannot view the column name in the filter section when creating a new view for the list or the column is not getting displayed in the view created?
--Cheers

How to create a report based on the selection of a node of a tree

Hello,
I am new to Oracle Apex and I was trying to build a tree and also an interactive report based on the empno column of the emp table.
I have created a tree based on emp table. Now I want to display records of the employee selected in the tree.
Here is the tree query:
select case when connect_by_isleaf = 1 then 0
when level = 1 then 1
else -1
end as status,
level,
"ENAME" as title,
null as icon,
"EMPNO" as value,
null as tooltip,
null as link
from "#OWNER#"."EMP"
start with "MGR" is null
connect by prior "EMPNO" = "MGR"
order siblings by "ENAME"
Can anyone tell me step by step how to go from here?
I tried to follow the thread Re: tree question but could not understand much from it.

The approach for reloading the page and displaying the report is quite simple.
<li>You start by creating a new page item which would be used to store the selected node ID , eg. P100_SELECTED_NODE (you can make it atext item and change it hidden once everything works as expected)
<li>Modify the tree query and change the link column in the tree definition SQL query to a link to the same
for example if your page is 100 , you would make the tree node link to the same page but set the P100SELECTED_NODE with selected node's id_
This done here
{message:id=4410987}
In this case it would be
'f?p=&APP_ID.:100:'||:APP_SESSION||'::::P100_SELECTED_NODE:'||EMPNO as link Now when you click on a tree node link , it would come back to the same page, but set the P100_SELECTED_NODE with the empno of the clicked node.
<li> All that is left to do, is changing your Report so that it refers to the new item inorder to filter the records for this employee i.e empno
SELECT ...
WHERE empno= :P100_SELECTED_NODE

How to create a Filter based on 2 or more columns

Similar Messages

Maybe you are looking for