How to create a Lot has 2 Lot Status

Hi my friends!
I have a Lot with Code 140108, quantity of 80 units. It's status is Good. After taking a test, my customer found that: Lot has 40 units with Good Status and 40 units with Bad Status.
How can we do?
Look forward your ideas
Many thanks

Many thanks Jayabalan!
If warehouse was not Location controlled before. How can I transfer onhands of old Items after I set up Warehouse is Location Control?
By the way, do you know any profiles which create default information about "Lot Retest Interval" and "Expiry Interval", how to use them?

Similar Messages

Can someone tell me how to create accounting entries with the account status as error

Hi,
Can someone tell me how to create accounting entries with the
account status as error?
Thanks!!
Danny

It's call fixed/static background, and it is NOT directly support by iweb, you will need post processing either in html or javascript.
Varkgirl (you need to search the previous forum) and I did it since iweb1:
try Safari, and scroll: http://www.geocities.com/[email protected]/Links.html
invisible link? roddy, fishing for info again?

How to create Inpection Lot Z01 & 04 Type for same Material different Plans

I am trying to create an Inspectoin Lot for two different Inspection Types. One for (Z01) Incoming Inspection via MIGO and the other for (04) GR Inspection for Production via MFBF. The problem is I have the same Material for two different Inspection Plans. The Z01 Inspection Type was copies from the 01 Inspection Type only difference is I activated the Multiple Specs feature for Z01.
1st Plan = Materia Group....BM206014, Group Counter....1 (GR Incoming Inspectoin Z01 type)
2nd Plan = Material Group....BM206014, Group Counter....2 (GR Inspection for Production 04 type)
A) When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK. I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
B) When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02. If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above) I need to be able to select the plan like I can with the 04 type.
Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?

>
dhayes12 wrote:
> A) When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK. I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
>
> B) When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02. If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above) I need to be able to select the plan like I can with the 04 type.
>
> Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
Thanks!!!

How to create inspection lot manually without using QA01 Transaction code?

Hi,
Please anybody give procedure for creating Inspection Lot Manually without using Transaction Code QA01

Hello, Srinivas,
If you want another T code only then you can try QA01A.
or you can create a Physical Sample with QPR1 and then click on the button there to create inspection lot. To create inspection lot for that Physical sample (you will able to see that button only after releasing the sample) Or you can use QPR5.
But let me know the reason why you want T code other than QA01.
Regards,
Shyamal

How to create a lot in a bid invitation

hi,
could anybody send me information about the creation of lots in a bid invitation?
My email is [email protected]
Points will be awarded for the correct explanation.
Many thanks!
Edited by: David Iglesias Pujana on Jan 29, 2008 1:54 PM

Hi,
Please see the foll thread for the detailed explaination;
Bid Invitation
BR,
Disha.
Do reward points for useful answers.

How to create view that has an update statement

Tools: MS Management Studio SQL 2008 R2
Code:
Create View as Mocha
UPDATE dbo.Cola
SET Login_ID = Replace(PE15,RTRIM(Cast(Login_ID),'')
UPDATE dbo.cola
SET P4 = NullIf(P4,'')
I would like to create a database object "View" to hand it over to a user and run the script. How I would create a a view that would accept an update statement. Are any work around to accomplish this goal

Not quite sure what you want to achieve.
However, if your view displays rows from a single table and each row relates to exactly one row in the source table (no aggregates, no join, no transformation) then you can update it. The update will be executed on the table it refers to.
If you view is more complex, contains joins, aggregates and such, you can create a trigger on it to update the base table(s).
The conditions for a view to be updatable are a little more complex then what I wrote but you can find it here under "updatable view":
http://msdn.microsoft.com/en-CA/library/ms187956.aspx
In the end, you would have a view which displays rows and can be updated.
If all you want is to modify rows without viewing them then HuaMin Chen's solution is the one for you, create a stored procedure instead.

How to create customized long text in IDOC status record in WE02?

Hi,
In WE02 you can see the status of the idoc. If you double click on the short text that is coming in the status, you can see the long text. How do i customized my long text to that screen?

To create a message long text in SE91:
    1. Place the cursor on the corresponding message.
    2. Click the Long text pushbutton.
    3. Enter the long text.
    4. Save the data.
Edited by: YTL on Jun 27, 2011 5:51 PM

My mac book air has a virus which is creating a lot of issues...how do i get rid of it? is there a free software to detect it and remove it?

my mac book air has a virus which is creating a lot of issues...how do i get rid of it? is there a free software to detect it and remove it?

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

How to create an inspection lot for each line item of the Purchase order?

Hi,
How to create an inspection lot for each line item of the Purchase order ?
In detail if possible.

Hi
please check this
[thread|Create Inspection Lot;

[QM] How to create an inspection lot with task list assigned?

Hello, everyone.
I know, the similar questions have been asked plenty of times, but I am still unable to find a suitable receipe of the inspection lot creation. My goal is to create an inspection lot programmatically and be able to record its results using, e.g., BAPI_INSPOPER_RECORDRESULTS.
Creating a lot does not appear to be a big problem. I just call the following FMs:
QPL1_INITIALIZE
QPL1_INSPECTION_LOT_CREATE
QPL1_UPDATE_MEMORY
QPL1_INSPECTION_LOTS_POSTING
BAPI_TRANSACTION_COMMIT
As a result, I have a new shiny inspectin lot, but it comes with statuses "CRTD" and "CHCR". I do specify PLNAL and PLNNR fields values for the QALS structure which is passed to QPL1_INSPECTION_LOT_CREATE, but that does not seem to have any effect. When I call BAPI_INSPOPER_RECORDRESULTS later (result values and inspection points come from another lot which is used as a template), it reports of beging unable to find characteristics for the inspection operations (error E026).
Does anyone know which of the QPL1_INSPECTION_LOT_CREATE parameters affect task list assignment besides PLNAL and PLNR? Or maybe there is a special FM which associates a task list with an inspection lot?
Thank you in advance.

Hi Samuel,
You can get create an Agent as a Task by using the following steps:
1. Go to Customizing --> EHS --> Industrial Hygiene & safety --> Risk Assessment --> Specify Agent Types
2. Click on "TASK' Agent type and click on Details icon (CtrlShiftF2)
3. In the "Only EHS-IHS" drop down, Select "No"
4. Save the entry
5. Now try creating an Agent [CBIH92] and you can create an Agent as a Task.
Hope it Helps,
Raghu

When creating a lot of pdf's from Word my computer opens every created pdf for viewing? How do I remove this property from use

Have to create a lot of pdf's in the future, so this property is quite annoying. Is it removable ?

Using Adobe Acrobat Professional
Converting a lot of Word.docx to pdf. And each time the system shows me the resulting pdf to view. It is annoying but not critical to my work. Is there a place in the Adobe Acrobat Pro preferences or some other place to remove this.
I am using the right mouse button to create the pdf.
Anu Kivimäki
Secretary, Global Product Development Configured &
Standards Products, Global technology
Pumps Equipment
Sulzer Pumps Finland Oy
P.O. Box 66, Pajatie 75, FI 48601 Kotka
Tel + 358 (10) 234 5379
Mobile + 358 50 526 1233
[email protected]<mailto:[email protected]>
www.sulzer.com

How to create inprocess insp. lot manually

HI Team,
I have requirement to create inprocess inspection lot as & when required. What are the settings required to do in QM view insp. type.
I have tried with "Preferred inspection type" set up, but no inspection lot is allowed to create manually in QA01.
Then I tried with 03 insp. type "Active". But it generated lot for every production order during release of order.
But my requirement is to create lot during inprocess production only when it is rejected.
Pls suggest me solution.
Thanks

Hello Bhushan ,
You can create a insp lot with 03 origin by putting plant & insp origin in QA01 initial screen ....but I will suggest to use inspection origin 89 with relevant setting as per business requirement as you want to create the lots only when material is rejected .
Else you can maintain one more insp type say,0301 with insp origin 03. This will help in classifying the inspection lots which are created for this process & not standard in-process inspection,
Can you please explain the business scenerio which demands to create lots only incase of rejections .....as to ascertain whether the product is inline with quality standards we need to inspection the same (which requires inspection lot for lab processing & tracebility)
Thanks
Kaushik

How to create an inspection lot out of a sales order?

Hey all,
I know that at purchasing side you can make a "source inspection" which makes it possible to create an inspection lot before you do a goods receipt.
Is somehting similar existing at sales side meaning that you can create the inspection lot out of the sales order, but before a delivery or delivery note is created?
Thanks for the replies,
Philippe

hi
yes system can create inspection lot before or after delivery provided you have activated the material for inspection type and specified in the QM info record
for detailed process kindly refer here
http://help.sap.com/saphelp_46c/helpdata/en/af/fc4f35dfe82578e10000009b38f839/tree.htm
regards
thyagarajan

How to split inspection lot in Routing?

Dear Gurus,
Is there any chance to create splitting inspection lot in the middle of a routing process ?
My scenarios are :
I have a BOM with finished product X and Component A
I also have Routing AA with 2 operation inside, Operation 1 for Production Process, while Operation 2 for Quality Control ( in 1 Routing )
The flow production is the BOM Component A will be issued into Operation 1(it will be issued in 1 PC), after that the output from Operation 1 will be Product X in many pieces (for example 10 pcs and also define as 10 batch number)
Now the problem is, when the 10 pcs product X have to go into the operation 2 is there should be define per inspection lot for every batch number (so in this case it should create 10 inspection lot) for QC Operation
What i know now is the inspection lot already generated for inprocess inspection (for all operation), but it is just 1 inspection lot for 1 production order
I need to create inspection lot from receiving product X after operation 1 equal to the amount batch created from finishing operation 1 ( 10 pcs = 10 inspection lots), but still inside the routing process and then process it into operation 2 (QC station), how to do that??
is there anyone who can help to solve this problem?
Regards,
Rizki

Hello Shantilal,
once you have created an inspection point you cannot change the data -> This would lead to an inconsistency simular to the following case.
This can lead to dumps if you change the data of an existant inspection point in customizing. SAP recommends creating a new inspection point definition.
The reason is the fact that key fields can be maintained via customizing, a change of these key fields means that the system will try to sort inspection points with the old key fields using the newly defined key fields.
Example: Customizing -> Define Identifier for Inspection Points
(1) indicates the position in the key
Inspection point definition for Z01
Key 1 (Original Key)
(1) Text length 18, (2) Text length 10, (3) Number length 10, (4) Number length 3
Is changed to Key 2
(1) Date, (2) Time, (3) Number length 10, (4) Number length 3
As you can imagine if the plan tries to select previously created inspection points this will lead to a dump, because the key has been changed.
In this case you need to create a new inspection point definition Z02 with the new key and create a plan which also uses the new inspection point type.
Appartently you have done so, but the plan assigned to the inspection lot uses the previous inspection point definition, if you were to change the inspection points this would also lead to a dump.
I hope that this answer helps you to understand why the requested function is not possible.
Regards,
Isabelle

Post GR (from production) + Create inspection lot through an interface

Dear All 
We would like to set up an interface which posts a GR (production - mvt type 101) and also creates an inspection lot for the produced batch. When you post this GR online (MB31), it is possible to have the inspection lot created automatically (some memory ID has to be flagged), which actually first triggers a SAP standard popup asking for the inspection plan. 
I have tried setting this up with a test program, first calling BAPI_GOODSMVT_CREATE to post the GR and then calling a combination of functions, the main one being QPL1_INSPECTION_LOT_CREATE, to have the inspection lot created. I am however having troubles with the generated inspection lot, e.g. when I click the button "Mat. Documents", it says "no material documents fonud". 
Does anybody have any suggestions? Our system is 4.6 C. If I appear reluctant to answer any of your replies, that's because I'm out for holidays the upcoming 20 days) 
Thank you and krgs 
Tom 
Edited by: Tom Van Oevelen on Aug 26, 2009 3:53 PM
Edited by: Tom Van Oevelen on Aug 26, 2009 4:00 PM
Edited by: Tom Van Oevelen on Sep 22, 2009 5:15 PM

Hi Lammie,
I am really confuses actually what you want, but can give you a brief idea about in process inspection.
There are 2 of inspection types related to it-03 and 04. 03 type will create lot but that will use routing as task list. 04 will use inspection plan as task list. So, when processing production order, 1st 03 type will generate a lot, there you can check hows the quality going.This lot is not stock relevant. After confirmation, 04 type will create another lot for final result confirmation and this lot is stock relevant.

How to create a Lot has 2 Lot Status

Similar Messages

Maybe you are looking for