How to create an inspection lot out of a sales order?

Hey all,
I know that at purchasing side you can make a "source inspection" which makes it possible to create an inspection lot before you do a goods receipt.
Is somehting similar existing at sales side meaning that you can create the inspection lot out of the sales order, but before a delivery or delivery note is created?
Thanks for the replies,
Philippe

hi
yes system can create inspection lot before or after delivery provided you have activated the material for inspection type and specified in the QM info record
for detailed process kindly refer here
http://help.sap.com/saphelp_46c/helpdata/en/af/fc4f35dfe82578e10000009b38f839/tree.htm
regards
thyagarajan

Similar Messages

  • How to create an inspection lot for each line item of the Purchase order?

    Hi,
    How to create an inspection lot for each line item of the Purchase order ?
    In detail if possible.

    Hi
       please check this
    [thread|Create Inspection Lot;

  • How to create item wise invoice with reference to sales order.

    Hi ,
    Please let me know how to create item wise invoice with reference to sales order.
    Ex : Sales order has 2 line items .
              When creating invoice system should create two invoices for each line items.
    I have tried with copy control but I am not able to do it.
    Please advise.
    Regards

    Hi,
    Please let us know your exact requirement. Whether you want it to be fixed like only one line item to be billed every time ot it to be based on selection you do every time.
    As per my understanding it should not be fixed and in that case it should like as follows,
    In VF01 you will select Del. document/S.O. number and click on selection list and will take you to next screen as mention below,
    and select desire line item to be billed and click on copy and will take you to billing screen.
    Regards,
    Ajit K Singh

  • How to create a credit memo for an existing sales order !

    Can any body help for how to create a credit memo for an existing sales order !

    Hi,
    It is actually possible to create credit memos from sales orders though it is not followed in most of the scenarios.
    We have got a scenario in commodity trading that a sales order will be created with positive value. Once the swaps are settled by the portfolio mngt team, if we have to give some money to the payer, then a credit memo will be greated (as in their case all invoices will have only +ve value as net value) with reference to the sales order. In the copy control, the main field to be taken care of at itme level is the PRICING TYPE for which a value of F has to be maintained. This will convert the sign of the values and fix them. Now a credit memo will be created for teh saels order.
    In this case, the document cateogyr of sales order will be C in VBAK, but it will be K in VBFA table which is the table for document flow.
    Hope this answers your question. You can reward if it helps you.
    Otherwise the normal process is
    SALES ORDER---INVOICECREDIT MEMO REQUEST----CREDIT MEMO

  • [QM] How to create an inspection lot with task list assigned?

    Hello, everyone.
    I know, the similar questions have been asked plenty of times, but I am still unable to find a suitable receipe of the inspection lot creation. My goal is to create an inspection lot programmatically and be able to record its results using, e.g., BAPI_INSPOPER_RECORDRESULTS.
    Creating a lot does not appear to be a big problem. I just call the following FMs:
    QPL1_INITIALIZE
    QPL1_INSPECTION_LOT_CREATE
    QPL1_UPDATE_MEMORY
    QPL1_INSPECTION_LOTS_POSTING
    BAPI_TRANSACTION_COMMIT
    As a result, I have a new shiny inspectin lot, but it comes with statuses "CRTD" and "CHCR". I do specify PLNAL and PLNNR fields values for the QALS structure which is passed to QPL1_INSPECTION_LOT_CREATE, but that does not seem to have any effect. When I call BAPI_INSPOPER_RECORDRESULTS later (result values and inspection points come from another lot which is used as a template), it reports of beging unable to find characteristics for the inspection operations (error E026).
    Does anyone know which of the QPL1_INSPECTION_LOT_CREATE parameters affect task list assignment besides PLNAL and PLNR? Or maybe there is a special FM which associates a task list with an inspection lot?
    Thank you in advance.

    Hi Samuel,
    You can get create an Agent as a Task by using the following steps:
    1. Go to Customizing --> EHS --> Industrial Hygiene & safety --> Risk Assessment --> Specify Agent Types
    2. Click on "TASK' Agent type and click on Details icon (CtrlShiftF2)
    3. In the "Only EHS-IHS" drop down, Select "No"
    4. Save the entry
    5. Now try creating an Agent [CBIH92] and you can create an Agent as a Task.
    Hope it Helps,
    Raghu

  • How to create multiple WIP jobs from a single Sales Order Line

    Hi all,
    I want to know if there's a standard way to create multiple single unit wip jobs from a sales order line which has 2 or more units, i mean...
    I have a sales order line with item A with 3 units. If I progress the sales order, a single job is automatically created in WIP with 3 units to be created. What i want is to create 3 jobs with one unit each, all of them linked to the sales line order...
    Thanks in advance!
    Regards!

    Assuming simplest of scenarios....
    In case of changes to Sales order qty, an unplanned order will simply disappear.
    If a wip job has already been created, you will get a cancel message (in case the job is not needed) or a reschedule out message (if the quantity needs to be reduced).
    ASCP will give you a reschedule in /out message if the dates change.
    Sandeep Gandhi

  • How to create a Contract with reference to a Sales-Order(VA01) with a BAPI

    Hi,
    my name is Wadim and i need help.
    My problem:
    I am creating a sales-order(VA01) with the BAPI 'BAPI_SALESORDER_CREATEFROMDAT2'.
    After that i have to create a contract(VA41) with reference to this order. I found the BAPI "BAPI_CONTRACT_CREATEFROMDATA" and it has the same interfaceparameters like the salesorder-bapi. but there are no parameters to get a connection to the sales-order.
    Is it even possible to get a connection to a sales-order with a bapi???
    thanks for help
    regards mark
    Edited by: Krapp Wadim on May 20, 2010 9:19 PM

    Hi Wadim,
    I have a similar requirement to create order lines in an existing contract with reference using  BAPI_CUSTOMERCONTRACT_CHANGE.  The order lines get created in the contract. However, the condition types from the order line which i'm referencing are not getting referenced and are not getting added in the Contract's line after referencing.
    Did you come across any such issue ? If yes , could you suggest the solution ?
    Regards,
    Venkat.

  • How the availiblity check is carried out during the sales order creation

    Hi All,
    I have maintained planned delivery time, GRProcesing time and replenishment lead time in days in material master. I am not understand ing how the system is calculating the availability date of the material during sales order creation.
    Please do needful regarding this.
    Regards
    Phani

    Hi,
    Using the Scheduling data from Delivery & Transportation Scheduling, the system does the backward calculation from the Requested Delivery Date. This is used to arrive at Material Availability Date.
    On the Material Availability Date, system checks the Available Qty, as seen in CO09 in column ***. ATP Qty. If the Available Qty is > than Required Qty, Requested Delivery Date is confirmed. Otherwise,
    System moves into the future till it finds the required Available Qty. The new date is then the new Material Availability Date.
    On getting the confirmed Material Availability Date, system does the Forward Scheduling to arrive at a Confirmed Delivery date.
    Regards

  • Creating new inspection lot origin via SPRO

    Hi guys.
    I would like to know how to create new inspection lot origin via SPRO.
    I tried going via SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Lot Origins and Assign Inspection types , but could not find the way.
    Thanks in advance.

    Hi,
    You should 1st create/define the inspection types in OQL1 for your needs then you should assign them to locations.
    Have you defined your inspection types?
    Check n revert
    Shiva

  • Can we create 2 inspection lots at the time of goods receipt.

    Hi experts,
         Can we create two inspection lots at the time of goods receipt from vendor.I will assign two inspection types in material master
    suppose 01,02.Both are releated to goods receipt.For one inspection lot when we take usage decision stock should not post into usage decision.for other inspection lot stock has to be posted.Is this possible?if possible how to do configuration?

    I think I made this recommendation in a previous post concerning this but this is exactly what reference operation sets are created for.
    Create the reference operation set for the characteristics that are used for all the materials.  You create this once.
    When you create the sepcific plan for the individual materials, you include the reference operation as one of the operations, (probably the first one in your case).  You don't have to add characteristics, modify or change it.  All the characeristics and settings come from the reference operation.  If you need to make a change you edit the reference operation and make the change once.   The change is immediately seen in all newly created inspection lots.
    In a second operation of the plan, you add the characteristics specific to the material.
    You can add different workcenters to the operations if you want.  That way you can set up security on the workcenters and control who can record results against which operations.
    Aside from creating lots manually, you can't create two lots at the same time from the same GR.
    Craig

  • How to create shipment document with out inbound delivery document

    Dear Friends
    How to create shipment document with out outbound/inbound delivery document.
    In my client scenario, there is no inbound delivery for normal purchases.
    Just there are raising the PO to vendor, then they are doing MIGO for goods receipt.
    Can we do shipment creation with reference to PO?
    If it is possible, how it will be?
    Please let it solve
    With regards
    Lakshmikanth

    Dear Sameer,
    Please go to transaction VT01N here you enter Transportation planning point and shipment type then press enter.
    Now system will take you to the shipment document creation screen here you click on Select deliveries or press F6 now system will take you to the select outbound deliveries screen in this screen you enter selection data then execute, now deliveries will get assigned to that shipment.
    After assigning the deliveries enter the remaining data then complete the shipment finally save the shipment document.
    For more information please go through this SAP help link
    Note:- Shipment process need to be carry out for the deliveries before PGI.
    http://help.sap.com/saphelp_47x200/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
    I hope this will help you,
    Regards,
    Murali.

  • Create multple inspection lots at customer returns

    Hi all,
    at my comany we've the following problem. Customer returns should be posted to insp stock and an inspection lot must be created. When a customer has multiple return from the same batch it should create multiple inspection lots. We use insp 05 for this. But we also use 05 for the receipt of externally produced materials. This should only create one inspection lot. Therefor it's not possible to set the indicator in the inspection setup in the maerial master.
    We had a look at inspection type 06, but this is not stock relevant. What is the best way to set this up?
    thank for your help.

    Its not the delivery I'm concerned about.  Its the other 05 lots that he creates via material movements.
    If the Z inspection type is assigned to the delivery type as proposed, the Z inspection type still has an 05 inspection origin.  It is the origin that SAP links to material movements not the inspection type.  As delivered most inspection types match one to one the origin, i.e. an 05 inspection type to an 05 origin.  An 04 inspection type to an 04 origin, etc..
    When a movement is used that is linked to the 05 inspection orgin and an inspection is called for, the system looks at the material master and attempts to assign an inspection type with an 05 orign. In this case, they'll be two inspection types active with an 05 oriign.  The standard 05 and the Z05. 
    Now it might work if the Z05 is assigned to the delivery type for returns and the 05 inspection type is marked as preferred.  Hopefully the Z05 will get used for the deliveries and the 05 for all others  But I'm not 100% sure the system will behave exactly that way.  I 've never tested that scenario specifically.
    FF

  • How to create inprocess insp. lot manually

    HI Team,
    I have requirement to create inprocess inspection lot  as & when  required. What are the settings required to do in QM view insp. type.
    I have tried with "Preferred inspection type" set up, but no inspection lot is allowed to create manually in QA01.
    Then I tried with 03 insp. type "Active". But it generated lot for every production order during release of order.
    But my requirement is to create lot during  inprocess production only when it is rejected.
    Pls suggest me solution.
    Thanks

    Hello Bhushan ,
    You can create a insp lot with 03 origin by putting plant & insp origin in QA01 initial screen ....but I will suggest to use inspection origin 89 with relevant setting as per business requirement as you want to create the lots only when material  is rejected .
    Else you can maintain one more insp type say,0301 with insp origin 03. This will help in classifying the inspection lots  which are created for this process & not standard in-process inspection,
    Can you please explain the business scenerio which demands to create lots only incase of rejections .....as to ascertain whether the product is inline with quality standards we need to inspection the same (which requires inspection lot  for lab processing & tracebility)
    Thanks
    Kaushik

  • Problem when created an Inspection Lot.

    Hello PP Guru's,
    I have a major problem with Inspection Lot.
    I have created an Inspection Lot but forgot to create an Inspection Plan for the Material for which the lot has been created.The Inspection Lot is in CRTD status which doesnt allow me to record the results.
    I know one method that I can do GR reversal so that the material can be removed from Quality stock(Lot will come to LTCA status) and then can do GR again so to fetch Inspection Characteristics of the material from Inspection Plan which I have created so the new lot created will be in Release status which allow me to process the lot.
    I want to know if there is any other method by which I can Include the Inspection Plan for the Lot which is in CTRD status without reversing GR Document.
    Thanks for the help in advance.
    Points will be rewarded to useful answers.
    Rgds,
    Rakesh Wade.

    Hi
    create the inspection plan appropriately.
    Then go to QA32.select the ispetion lot .
    Press tab Inspection specifications.
    Then press the button 'task list/specification'
    It will be assigned.
    Then refresh the screen.
    The it will solve your problem.
    Regards
    YMREDDY

  • HT2534 How to create Apple ID with out credit card information?

    How to create Apple ID with out credit card information?

    Try following the instructions on this page : http://support.apple.com/kb/HT2534

Maybe you are looking for