How to create a Plan.xml file for modification

Hi,
I am trying to create a plan.xml file. Is there any way, I can generate a plan.xml file.
I see a tab in Admin Console in deployments and plan. but there is nothing there. what it has to do with plan.
Thanks
regards
Amir riaz

You can find the steps here.
http://weblogic-wonders.com/weblogic/2009/11/29/plan-xml-usage-for-message-driven-bean/
http://weblogic-wonders.com/weblogic/2009/12/16/invalidation-interval-secs/

Similar Messages

How to create a build.xml file ??

Hi there,
I am learning j2ee at the moment. I have been throught the tutorial and got everything working (finally). however, now that I have started writing my own code, I am stuck with writing the build.xml file (as this is not covered in the tutorial, it is just provided). Does anyone know a good link that will give me step by step instructions on how to create my own build.xml file for my application.
thanks

You need to learn ant. Go here:
http://jakarta.apache.org/ant/
I also recommend "Java Development with Ant" by Hatcher and Loughran, just published.

How to create both a XML file and a check

Hi,
I'm currently implementing the use of XML files for payments in the USA and I run into a problem for check payments. We need to generate both an XML file, which needs to be sent to the bank for validation and the checks, which are printed by the finance department and then sent to the vendors. These checks are only paid when they match the XML file.
We are using payment medium workbench for generating the XML file (DME structure) and on running F110 I get a nice XML file, however this prevents me from entering the printing form for check in the printout tab of F110.
I tried to add the check in transaction OBPM1, but I cannot get it to work.
Anny suggestions on how I can continue?
Thanks in advance
Peter Kauwenberg

Hi Kauwenberg,
You can add multiple payment in DMEE file but for that you have to change in DME properties where if you want sort according to payment method or dont want to club the different method in one line then add on more filed RZAWE from table FPAYH.
I have used this options to one of my client where they want to add check payment with other payment method.
Kindly try this and let me know in case of any issue.
Regards,
Dattatraya Biradar

How to create inspection plan in mass for material

Dear Guru,
How to create inpection plan for material in MASS, usually we will create inspection plan in QP01 but in mass for more than one material how to maintaain? Please help
Regards
Karthik.

Hi raja
refer following lonks
QM- LSMW FOR INSPECTION PLAN
Re: CEWB:Inspection Plan upload
bapi for qm inspection plan
Regards
Sujit

How to create an unsigned appxbundle file for windows store app?

Hi,
Is it possible create an unsigned appxbundle file for windows store app and later sign it with my company certificate?
If yes, how can I achieve it?
Thanks

You would create your own appx pacakge using
MakeAppx.exe.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

How to create a positve pay file for ACH and Wire transfers through F110

Hi All,
I need to create a positive pay file for ACH and Wire transfers to the bank for auto clearing. For checks we have a standard program (RFCHKE00) to create the positive pay file which creates the output lists after the F110 payment process. Is there any standard SAP program available which creates the Positive pay file (Output list) for ACH and wire transfers through F110.
Thanks
Sridhar

Please let your abaper create a 'Z' program using RFCHKE00. For example 'ZRFCHKE00' and use it in the same way as you currently use RFCHKE00 for checks.
After the program is created, use SE38 and save it as a variant using your own specifications. Thereafter, in F110, when carrying out a payment run, under 'Printout/data medium', enter the program name under "Lists" with the variant. Then click on 'Maintain Variants' and make the necessay specifications there as well.
Instruct your end-users to enter this program when running ACH and wire transactions through F110.
Please let us know if this information was helpful.
Thanks,
Elias

How to create multiple pof configuration files for c# client

Is there a way to have multiple pof files for c# coherence client?
Can I create a file called my-pof-config.xml with the following line...
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
<include>assembly://Coherence/Tangosol.Config/coherence-pof-config.xml</include>
<include>file://pof-config.xml</include>
and here is what pof-config.xml file look like
<?xml version="1.0" encoding="UTF-8"?>
<pof-config xmlns="http://schemas.tangosol.com/pof">
<user-type-list>
In my C# visual studio project, this is where I load my-pof-config.xml in app.config
<coherence>
<cache-factory-config>coherence.xml</cache-factory-config>
<cache-config>coherence-cache-config.xml</cache-config>
<pof-config>my-pof-config.xml</pof-config>
</coherence>
and this is what I saw in the log...
2012-02-23 14:35:35,529 DEBUG Coherence (null) - 2012-02-23 14:35:35.529 level(thread=System.Threading.Thread): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
2012-02-23 14:35:35,545 DEBUG Coherence (null) - 2012-02-23 14:35:35.545 level(thread=System.Threading.Thread): Loaded included POF configuration from "EmbeddedResource(Uri = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml, AbsolutePath = assembly://Coherence/Tangosol.Config/coherence-pof-config.xml)"
2012-02-23 14:35:35,623 DEBUG Coherence (null) - 2012-02-23 14:35:35.623 level(thread=ExtendTcpCacheServiceCSharp:TcpInitiator): Loaded POF configuration from "FileResource(Uri = file://my-pof-config.xml, AbsolutePath = D:\worktrees\ads\mainline\v2\ads\demos_cs\build\my-pof-config.xml)"
I don't see pof-config.xml is loaded at "Loaded included POF configuration....". How do I get around it so I can load multiple pof configuration files for c# client?

Hi,
Not sure about C# but I would suggest try removing file:// from
<include>file://pof-config.xml</include>and keep pof-config.xml and my-pof-config.xml in the same directory.
Hope this helps!
Cheers,
NJ

How to change a rss.xml file for m3u file for my podcast

Bonjour,
I actually produce as well a podcast with unless 3 mp3 file,and that's ok ... But, on one of my post, I stream a playlist to a page of my website , and I noticed, after generating a playlist from my player when streaming (.m3u file)... I notice that I can play it in i tunes in a continuing stream (I can connect from this file in itunes on another post to my stream (note that I use a static IP from my access provider, in order to a stable connection to my web site - without using No IP) ...
My question is,as the application recognizing the file and playing it,how to configure my rss.xml for this type of file(*.m3u)...
Thank you for replying

I don't think you are going to be able to do this: podcasts are not intended to contain streams or playlists, only specific audio or video files. The fact that the iTunes Application can connect to it doesn't mean that it will work in a podcast feed. However if you want to ask iTunes Support for advice it's at at
http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'.

How Do I Access An XML File For A SWF I Put Into Captivate 6.0

Hi,
I inserted a swf animation into my Captivate project that calls an external xml file. When I run the Captivate project, the swf works except it doesn't display any of the information from the xml file. How do I get Captivate let the inserted swf see the xml?
Thanks

Sreekanth,
I was thinking that might be the solution. I'll test it on Monday and update the results.
Thanks,
Mike

Multiple log4j.xml files for single application.

Hi All,
How to use multiple log4j.xml files for single application?
I do have a pluggable application modules. ie, If I add a jar I will get some functionalities. Like that i do have many jars.
Log4j.xml also will be present in that jar only. So if I add multiple jar files like this, I will get multiple log4j.xml files. What should I do?

Each logger can have its own file I think. Check the log4j documentation.

How to deploy the web.xml file when trying to use the JSP SDK from SAP?

I want to use the adduser.jsp which downloaded form SAP SDK samples to add user in BO, but I cannot run it sucessfully. I believe it's caused the web.xml file was not deployed appropriately.
could you please teach how to deploy the web.xml file for the JSP samples ?
Could you show me some sample of web.xml for the SDK jsp files? Thank you very much!

Ensure that you have followed below directory structure while deploying your web application.
   web_application_name
      WEB-INF
         lib
         classes
web.xml must be placed in WEB-INF. Ensure that you have included all the jar files and other necessary files in your application.
For more information refer to the below link:
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
Regards,
Anuj

How to create an XML File for Gantt?

Hi Everybody.
I need a Gantt in Web Dynpro ABAP. I need it for the boss to do a Forecast for Vacation. I Hope this is understanding.
Did Anyone know how can i create a XML File for the Gantt at runtime?
Thanks
MSi

Hi Marcus,
the following link is to the JNet/JGantt developer doco
[JNet/JGantt Developer Documentation|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/lw/uuid/f010ec31-9658-2910-3c83-c6e62904eceb]
included in this is the:
[Schema for XML|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/lw/webdynpro/jnet_jgantt%20developer%20documentation/schema/xml-spy/jnet-schema.html]
You can use this to build XML to represent a gantt like chart.
I did this to build XML to represent employee avaliablity - although we fronted the gantt through WD Java not ABAP - the java applet called is the same (I believe).
Don't underestimate the work required to tweek your data into a decent layout. It took me days.
There may be tools/api to help generate the XML - I don't know of them - I'd look forward to seeing any other replies to this thread from people who have used/built any. An example of a class that generates JNet XML - CL_SPI_UI_JNET - but this does not seem to be a Gantt display.
Cheers,
Chris

How to set SAXParser at command-line interface to create a large XML file

Hi,
I am trying to create a large XML file (more than 50 MB) by selecting from Oracle database but failed because of "out of memory" error. According to "Oracle XML Developer Guide", we should use SAXParser to parsing a large XML file. But there is no example to show how to set SAXParser at command-line
Following is what I use to get xml files. It works only when the file is small.
java OracleXML getXML -DateFormat -withDTD -rowsetTag PO_HDR -conn
"jdbc:oracle:oci8:@server_name" -user "ID/password" "select * from table_name"
When I set SAXParser at the way below,
java oracle.xml.parser.v2.SAXParser OracleXML getXML -DateFormat -withDTD -rowsetTag PO_HDR -conn
"jdbc:oracle:oci8:@server_name" -user "ID/password" "select * from table_name"
it failed with the error message: "In class oracle.xml.parser.v2.SAXParser: void main(String argv[]) is not defined"
Does anyone know how to solve the problem? I'll be appreciated very much for your help.
Yi

here are my ideas.
register the xml schema.
using xmldom, generate the desired xml output and return as xmltype.
then you can use something like this to check.
declare
xmldoc xmltype ;
begin
   -- populate xmldoc from you xmldom function
   -- validate against XML schema
   xmldoc.isSchemaValid(schema_url, root_element);
   if xmldoc.isSchemaValid = 1 then
        --valid schema
   else
        --invalid
   end if;
end

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

How to create a Plan.xml file for modification

Similar Messages

Maybe you are looking for